freebsd-dev/sys/arm/econa/if_ecereg.h
Rui Paulo 381a19cce0 Add support for Cavium Econa CNS11XX ARM boards. These boards were
previously know by StarSemi STR9104.

Tested by the submitter on an Emprex NSD-100 board.

Submitted by:	Yohanes Nugroho <yohanes at gmail.com>
Reviewed by:	freebsd-arm, stas
Obtained from:	//depot/projects/str91xx/...
2010-01-04 03:35:45 +00:00

155 lines
4.3 KiB
C

/*-
* Copyright (c) 2009, Yohanes Nugroho <yohanes@gmail.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IF_ECEREG_H
#define _IF_ECEREG_H
#define ETH_CFG 0x08
#define ETH_CFG_RMII (1 << 15)
#define PHY_CONTROL 0x00
#define PHY_RW_OK (1<<15)
#define PHY_ADDRESS(x) ((x) & 0x1)
#define PHY_REGISTER(r) (((r) & 0x1F) << 8)
#define PHY_WRITE_COMMAND (1<<13)
#define PHY_READ_COMMAND (1<<14)
#define PHY_GET_DATA(d) (((d) >> 16) & 0xFFFF)
#define PHY_DATA(d) (((d) & 0xFFFF) << 16)
#define PORT_0_CONFIG 0x08
#define ARL_TABLE_ACCESS_CONTROL_0 0x050
#define ARL_TABLE_ACCESS_CONTROL_1 0x054
#define ARL_TABLE_ACCESS_CONTROL_2 0x058
#define ARL_WRITE_COMMAND (1<<3)
#define ARL_LOOKUP_COMMAND (1<<2)
#define ARL_COMMAND_COMPLETE (1)
#define PORT0 (1 << 0)
#define PORT1 (1 << 1)
#define CPU_PORT (1 << 2)
#define VLAN0_GROUP_ID (0)
#define VLAN1_GROUP_ID (1)
#define VLAN2_GROUP_ID (2)
#define VLAN3_GROUP_ID (3)
#define VLAN4_GROUP_ID (4)
#define VLAN5_GROUP_ID (5)
#define VLAN6_GROUP_ID (6)
#define VLAN7_GROUP_ID (7)
#define PORT0_PVID (VLAN1_GROUP_ID)
#define PORT1_PVID (VLAN2_GROUP_ID)
#define CPU_PORT_PVID (VLAN0_GROUP_ID)
#define VLAN0_VID (0x111)
#define VLAN1_VID (0x222)
#define VLAN2_VID (0x333)
#define VLAN3_VID (0x444)
#define VLAN4_VID (0x555)
#define VLAN5_VID (0x666)
#define VLAN6_VID (0x777)
#define VLAN7_VID (0x888)
#define VLAN0_GROUP (PORT0 | PORT1 | CPU_PORT)
#define VLAN1_GROUP (PORT0 | CPU_PORT)
#define VLAN2_GROUP (PORT1 | CPU_PORT)
#define VLAN3_GROUP (0)
#define VLAN4_GROUP (0)
#define VLAN5_GROUP (0)
#define VLAN6_GROUP (0)
#define VLAN7_GROUP (0)
#define SWITCH_CONFIG 0x004
#define MAC_PORT_0_CONFIG 0x008
#define MAC_PORT_1_CONFIG 0x00C
#define CPU_PORT_CONFIG 0x010
#define BIST_RESULT_TEST_0 0x094
#define FS_DMA_CONTROL 0x104
#define TS_DMA_CONTROL 0x100
#define INTERRUPT_MASK 0x08C
#define INTERRUPT_STATUS 0x088
#define TS_DESCRIPTOR_POINTER 0x108
#define TS_DESCRIPTOR_BASE_ADDR 0x110
#define FS_DESCRIPTOR_POINTER 0x10C
#define FS_DESCRIPTOR_BASE_ADDR 0x114
#define VLAN_VID_0_1 0x060
#define VLAN_VID_2_3 0x064
#define VLAN_VID_4_5 0x068
#define VLAN_VID_6_7 0x06C
#define VLAN_PORT_PVID 0x05C
#define VLAN_MEMBER_PORT_MAP 0x070
#define VLAN_TAG_PORT_MAP 0x074
#define ASIX_GIGA_PHY 1
#define TWO_SINGLE_PHY 2
#define AGERE_GIGA_PHY 3
#define VSC8601_GIGA_PHY 4
#define IC_PLUS_PHY 5
#define NOT_FOUND_PHY (-1)
#define MAX_PACKET_LEN (1536)
#define INVALID_ENTRY 0
#define NEW_ENTRY 0x1
#define STATIC_ENTRY 0x7
/*mask status except for link change*/
#define ERROR_MASK 0xFFFFFF7F
/*hardware interface flags*/
#define FAST_AGING (0xf)
#define IVL_LEARNING (0x1 << 22)
/*hardware NAT accelerator*/
#define HARDWARE_NAT (0x1 << 23)
/*aging time setting*/
/*skip lookup*/
#define SKIP_L2_LOOKUP_PORT_1 (1 << 29)
#define SKIP_L2_LOOKUP_PORT_0 (1 << 28)
#define NIC_MODE (1 << 30)
#define PORT_DISABLE (1 << 18)
#define SA_LEARNING_DISABLE (1 << 19)
#define DISABLE_BROADCAST_PACKET (1 << 27)
#define DISABLE_MULTICAST_PACKET ( 1 << 26)
#endif