freebsd-dev/contrib/bc/doc/dc.1

450 lines
12 KiB
Groff

.\"
.\" dc.1 - the *roff document processor source for the dc manual
.\"
.\" This file is part of GNU dc.
.\" Copyright (C) 1994, 1997, 1998 Free Software Foundation, Inc.
.\"
.\" This program is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation; either version 2 of the License , or
.\" (at your option) any later version.
.\"
.\" This program is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License
.\" along with this program; see the file COPYING. If not, write to
.\" the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
.\"
.\" $FreeBSD$
.\"
.TH DC 1 "1997-03-25" "GNU Project"
.ds dc \fIdc\fP
.ds Dc \fIDc\fP
.SH NAME
dc \- an arbitrary precision calculator
.SH SYNOPSIS
dc
.SH DESCRIPTION
.PP
\*(Dc is a reverse-polish desk calculator which supports
unlimited precision arithmetic.
It also allows you to define and call macros.
Normally \*(dc reads from the standard input;
if any command arguments are given to it, they are filenames,
and \*(dc reads and executes the contents of the files before reading
from standard input.
All normal output is to standard output;
all error output is to standard error.
.PP
A reverse-polish calculator stores numbers on a stack.
Entering a number pushes it on the stack.
Arithmetic operations pop arguments off the stack and push the results.
.PP
To enter a number in
.IR dc ,
type the digits with an optional decimal point.
Exponential notation is not supported.
To enter a negative number,
begin the number with ``_''.
``-'' cannot be used for this,
as it is a binary operator for subtraction instead.
To enter two numbers in succession,
separate them with spaces or newlines.
These have no meaning as commands.
.PD
.SH
Printing Commands
.TP
.B p
Prints the value on the top of the stack,
without altering the stack.
A newline is printed after the value.
.TP
.B n
Prints the value on the top of the stack, popping it off,
and does not print a newline after.
.TP
.B P
Pops off the value on top of the stack.
If it it a string, it is simply printed without a trailing newline.
Otherwise it is a number, and the integer portion of its absolute
value is printed out as a "base (UCHAR_MAX+1)" byte stream.
Assuming that (UCHAR_MAX+1) is 256
(as it is on most machines with 8-bit bytes),
the sequence \fBKSK 0k1/ [_1*]sx d0>x [256~aPd0<x]dsxx sxLKk\fP
could also accomplish this function,
except for the side-effect of clobbering the x register.
.TP
.B f
Prints the entire contents of the stack
.ig
and the contents of all of the registers,
..
without altering anything.
This is a good command to use if you are lost or want
to figure out what the effect of some command has been.
.PD
.SH
Arithmetic
.TP
.B +
Pops two values off the stack, adds them,
and pushes the result.
The precision of the result is determined only
by the values of the arguments,
and is enough to be exact.
.TP
.B -
Pops two values,
subtracts the first one popped from the second one popped,
and pushes the result.
.TP
.B *
Pops two values, multiplies them, and pushes the result.
The number of fraction digits in the result depends on
the current precision value and the number of fraction
digits in the two arguments.
.TP
.B /
Pops two values,
divides the second one popped from the first one popped,
and pushes the result.
The number of fraction digits is specified by the precision value.
.TP
.B %
Pops two values,
computes the remainder of the division that the
.B /
command would do,
and pushes that.
The value computed is the same as that computed by
the sequence \fBSd dld/ Ld*-\fP .
.TP
.B ~
Pops two values,
divides the second one popped from the first one popped.
The quotient is pushed first, and the remainder is pushed next.
The number of fraction digits used in the division
is specified by the precision value.
(The sequence \fBSdSn lnld/ LnLd%\fP could also accomplish
this function, with slightly different error checking.)
.TP
.B ^
Pops two values and exponentiates,
using the first value popped as the exponent
and the second popped as the base.
The fraction part of the exponent is ignored.
The precision value specifies the number of fraction
digits in the result.
.TP
.B |
Pops three values and computes a modular exponentiation.
The first value popped is used as the reduction modulus;
this value must be a non-zero number,
and should be an integer.
The second popped is used as the exponent;
this value must be a non-negative number,
and any fractional part of this exponent will be ignored.
The third value popped is the base which gets exponentiated,
which should be an integer.
For small integers this is like the sequence \fBSm^Lm%\fP,
but, unlike \fB^\fP, this command will work with arbitrarily large exponents.
.TP
.B v
Pops one value,
computes its square root,
and pushes that.
The precision value specifies the number of fraction digits in the result.
.PP
Most arithmetic operations are affected by the ``precision value'',
which you can set with the
.B k
command.
The default precision value is zero,
which means that all arithmetic except for
addition and subtraction produces integer results.
.SH
Stack Control
.TP
.B c
Clears the stack, rendering it empty.
.TP
.B d
Duplicates the value on the top of the stack,
pushing another copy of it.
Thus, ``4d*p'' computes 4 squared and prints it.
.TP
.B r
Reverses the order of (swaps) the top two values on the stack.
.SH
Registers
.PP
\*(Dc provides at least 256 memory registers,
each named by a single character.
You can store a number or a string in a register and retrieve it later.
.TP
.BI s r
Pop the value off the top of the stack and store
it into register
.IR r .
.TP
.BI l r
Copy the value in register
.I r
and push it onto the stack.
This does not alter the contents of
.IR r .
.PP
Each register also contains its own stack.
The current register value is the top of the register's stack.
.TP
.BI S r
Pop the value off the top of the (main) stack and
push it onto the stack of register
.IR r .
The previous value of the register becomes inaccessible.
.TP
.BI L r
Pop the value off the top of register
.IR r 's
stack and push it onto the main stack.
The previous value
in register
.IR r 's
stack, if any,
is now accessible via the
.BI l r
command.
.ig
.PP
The
.B f
command prints a list of all registers that have contents stored in them,
together with their contents.
Only the current contents of each register
(the top of its stack)
is printed.
..
.SH
Parameters
.PP
\*(Dc has three parameters that control its operation:
the precision, the input radix, and the output radix.
The precision specifies the number
of fraction digits to keep in the result of most arithmetic operations.
The input radix controls the interpretation of numbers typed in;
all numbers typed in use this radix.
The output radix is used for printing numbers.
.PP
The input and output radices are separate parameters;
you can make them unequal,
which can be useful or confusing.
The input radix must be between 2 and 16 inclusive.
The output radix must be at least 2.
The precision must be zero or greater.
The precision is always measured in decimal digits,
regardless of the current input or output radix.
.TP
.B i
Pops the value off the top of the stack
and uses it to set the input radix.
.TP
.B o
Pops the value off the top of the stack
and uses it to set the output radix.
.TP
.B k
Pops the value off the top of the stack
and uses it to set the precision.
.TP
.B I
Pushes the current input radix on the stack.
.TP
.B O
Pushes the current output radix on the stack.
.TP
.B K
Pushes the current precision on the stack.
.SH
Strings
.PP
\*(Dc can operate on strings as well as on numbers.
The only things you can do with strings are
print them and execute them as macros
(which means that the contents of the string are processed as
\*(dc commands).
All registers and the stack can hold strings,
and \*(dc always knows whether any given object is a string or a number.
Some commands such as arithmetic operations demand numbers
as arguments and print errors if given strings.
Other commands can accept either a number or a string;
for example, the
.B p
command can accept either and prints the object
according to its type.
.TP
.BI [ characters ]
Makes a string containing
.I characters
(contained between balanced
.B [
and
.B ]
characters),
and pushes it on the stack.
For example,
.B [foo]P
prints the characters
.B foo
(with no newline).
.TP
.B a
The top-of-stack is popped.
If it was a number, then the low-order byte of this number
is converted into a string and pushed onto the stack.
Otherwise the top-of-stack was a string,
and the first character of that string is pushed back.
.TP
.B x
Pops a value off the stack and executes it as a macro.
Normally it should be a string;
if it is a number,
it is simply pushed back onto the stack.
For example,
.B [1p]x
executes the macro
.B 1p
which pushes
.B 1
on the stack and prints
.B 1
on a separate line.
.PP
Macros are most often stored in registers;
.B [1p]sa
stores a macro to print
.B 1
into register
.BR a ,
and
.B lax
invokes this macro.
.TP
.BI > r
Pops two values off the stack and compares them
assuming they are numbers,
executing the contents of register
.I r
as a macro if the original top-of-stack
is greater.
Thus,
.B 1 2>a
will invoke register
.BR a 's
contents and
.B 2 1>a
will not.
.TP
.BI !> r
Similar but invokes the macro if the original top-of-stack is
not greater than (less than or equal to) what was the second-to-top.
.TP
.BI < r
Similar but invokes the macro if the original top-of-stack is less.
.TP
.BI !< r
Similar but invokes the macro if the original top-of-stack is
not less than (greater than or equal to) what was the second-to-top.
.TP
.BI = r
Similar but invokes the macro if the two numbers popped are equal.
.TP
.BI != r
Similar but invokes the macro if the two numbers popped are not equal.
.ig
This can also be validly used to compare two strings for equality.
..
.TP
.B ?
Reads a line from the terminal and executes it.
This command allows a macro to request input from the user.
.TP
.B q
exits from a macro and also from the macro which invoked it.
If called from the top level,
or from a macro which was called directly from the top level,
the
.B q
command will cause \*(dc to exit.
.TP
.B Q
Pops a value off the stack and uses it as a count
of levels of macro execution to be exited.
Thus,
.B 3Q
exits three levels.
The
.B Q
command will never cause \*(dc to exit.
.SH
Status Inquiry
.TP
.B Z
Pops a value off the stack,
calculates the number of digits it has
(or number of characters, if it is a string)
and pushes that number.
.TP
.B X
Pops a value off the stack,
calculates the number of fraction digits it has,
and pushes that number.
For a string,
the value pushed is
.\" -1.
0.
.TP
.B z
Pushes the current stack depth:
the number of objects on the stack before the execution of the
.B z
command.
.SH
Miscellaneous
.TP
.B !
Will run the rest of the line as a system command.
Note that parsing of the !<, !=, and !> commands take precidence,
so if you want to run a command starting with <, =, or > you will
need to add a space after the !.
.TP
.B #
Will interpret the rest of the line as a comment.
.TP
.BI : r
Will pop the top two values off of the stack.
The old second-to-top value will be stored in the array
.IR r ,
indexed by the old top-of-stack value.
.TP
.BI ; r
Pops the top-of-stack and uses it as an index into
the array
.IR r .
The selected value is then pushed onto the stack.
.P
Note that each stacked instance of a register has its own
array associated with it.
Thus \fB1 0:a 0Sa 2 0:a La 0;ap\fP will print 1,
because the 2 was stored in an instance of 0:a that
was later popped.
.SH
BUGS
.PP
Email bug reports to
.BR bug-gnu-utils@prep.ai.mit.edu .
Be sure to include the word ``dc'' somewhere in the ``Subject:'' field.