freebsd-dev/sys/dev/al_eth/al_init_eth_kr.c
Wojciech Macek 7902c8dca8 Driver for PCI Ethernet NIC on Alpine V1 and V2.
Obtained from:         Semihalf
Submitted by:          Michal Stanek <mst@semihalf.com>
Sponsored by:          Annapurna Labs
Reviewed by:           wma
Differential Revision: https://reviews.freebsd.org/D7814
2016-10-20 11:31:11 +00:00

842 lines
23 KiB
C

/*-
* Copyright (c) 2015,2016 Annapurna Labs Ltd. and affiliates
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "al_init_eth_kr.h"
#include "al_serdes.h"
/**
* Ethernet
* @{
* @file al_init_eth_kr.c
*
* @brief auto-negotiation and link training algorithms and state machines
*
* The link training algorithm implemented in this file going over the
* coefficients and looking for the best eye measurement possible for every one
* of them. it's using state machine to move between the different states.
* the state machine has 3 parts:
* - preparation - waiting till the link partner (lp) will be ready and
* change his state to preset.
* - measurement (per coefficient) - issue decrement for the coefficient
* under control till the eye measurement not increasing
* and remains in the optimum.
* - completion - indicate the receiver is ready and wait for the lp to
* finish his work.
*/
/* TODO: fix with more reasonable numbers */
/* timeout in mSec before auto-negotiation will be terminated */
#define AL_ETH_KR_AN_TIMEOUT (500)
#define AL_ETH_KR_EYE_MEASURE_TIMEOUT (100)
/* timeout in uSec before the process will be terminated */
#define AL_ETH_KR_FRAME_LOCK_TIMEOUT (500 * 1000)
#define AL_ETH_KR_LT_DONE_TIMEOUT (500 * 1000)
/* number of times the receiver and transmitter tasks will be called before the
* algorithm will be terminated */
#define AL_ETH_KR_LT_MAX_ROUNDS (50000)
/* mac algorithm state machine */
enum al_eth_kr_mac_lt_state {
TX_INIT = 0, /* start of all */
WAIT_BEGIN, /* wait for initial training lock */
DO_PRESET, /* issue PRESET to link partner */
DO_HOLD, /* issue HOLD to link partner */
/* preparation is done, start testing the coefficient. */
QMEASURE, /* EyeQ measurement. */
QCHECK, /* Check if measurement shows best value. */
DO_NEXT_TRY, /* issue DEC command to coeff for next measurement. */
END_STEPS, /* perform last steps to go back to optimum. */
END_STEPS_HOLD, /* perform last steps HOLD command. */
COEFF_DONE, /* done with the current coefficient updates.
* Check if another should be done. */
/* end of training to all coefficients */
SET_READY, /* indicate local receiver ready */
TX_DONE /* transmit process completed, training can end. */
};
static const char * const al_eth_kr_mac_sm_name[] = {
"TX_INIT", "WAIT_BEGIN", "DO_PRESET",
"DO_HOLD", "QMEASURE", "QCHECK",
"DO_NEXT_TRY", "END_STEPS", "END_STEPS_HOLD",
"COEFF_DONE", "SET_READY", "TX_DONE"
};
/* Constants used for the measurement. */
enum al_eth_kr_coef {
AL_ETH_KR_COEF_C_MINUS,
AL_ETH_KR_COEF_C_ZERO,
AL_ETH_KR_COEF_C_PLUS,
};
/*
* test coefficients from COEFF_TO_MANIPULATE to COEFF_TO_MANIPULATE_LAST.
*/
#define COEFF_TO_MANIPULATE AL_ETH_KR_COEF_C_MINUS
#define COEFF_TO_MANIPULATE_LAST AL_ETH_KR_COEF_C_MINUS
#define QARRAY_SIZE 3 /**< how many entries we want in our history array. */
struct al_eth_kr_data {
struct al_hal_eth_adapter *adapter;
struct al_serdes_grp_obj *serdes_obj;
enum al_serdes_lane lane;
/* Receiver side data */
struct al_eth_kr_status_report_data status_report; /* report to response */
struct al_eth_kr_coef_up_data last_lpcoeff; /* last coeff received */
/* Transmitter side data */
enum al_eth_kr_mac_lt_state algo_state; /* Statemachine. */
unsigned int qarray[QARRAY_SIZE]; /* EyeQ measurements history */
/* How many entries in the array are valid for compares yet. */
unsigned int qarray_cnt;
enum al_eth_kr_coef curr_coeff;
/*
* Status of coefficient during the last
* DEC/INC command (before issuing HOLD again).
*/
unsigned int coeff_status_step;
unsigned int end_steps_cnt; /* Number of end steps needed */
};
static int
al_eth_kr_an_run(struct al_eth_kr_data *kr_data, struct al_eth_an_adv *an_adv,
struct al_eth_an_adv *an_partner_adv)
{
int rc;
boolean_t page_received = FALSE;
boolean_t an_completed = FALSE;
boolean_t error = FALSE;
int timeout = AL_ETH_KR_AN_TIMEOUT;
rc = al_eth_kr_an_init(kr_data->adapter, an_adv);
if (rc != 0) {
al_err("%s %s autonegotiation init failed\n",
kr_data->adapter->name, __func__);
return (rc);
}
rc = al_eth_kr_an_start(kr_data->adapter, AL_ETH_AN__LT_LANE_0,
FALSE, TRUE);
if (rc != 0) {
al_err("%s %s autonegotiation enable failed\n",
kr_data->adapter->name, __func__);
return (rc);
}
do {
DELAY(10000);
timeout -= 10;
if (timeout <= 0) {
al_info("%s %s autonegotiation failed on timeout\n",
kr_data->adapter->name, __func__);
return (ETIMEDOUT);
}
al_eth_kr_an_status_check(kr_data->adapter, &page_received,
&an_completed, &error);
} while (page_received == FALSE);
if (error != 0) {
al_info("%s %s autonegotiation failed (status error)\n",
kr_data->adapter->name, __func__);
return (EIO);
}
al_eth_kr_an_read_adv(kr_data->adapter, an_partner_adv);
al_dbg("%s %s autonegotiation completed. error = %d\n",
kr_data->adapter->name, __func__, error);
return (0);
}
/***************************** receiver side *********************************/
static enum al_eth_kr_cl72_cstate
al_eth_lt_coeff_set(struct al_eth_kr_data *kr_data,
enum al_serdes_tx_deemph_param param, uint32_t op)
{
enum al_eth_kr_cl72_cstate status = 0;
switch (op) {
case AL_PHY_KR_COEF_UP_HOLD:
/* no need to update the serdes - return not updated*/
status = C72_CSTATE_NOT_UPDATED;
break;
case AL_PHY_KR_COEF_UP_INC:
status = C72_CSTATE_UPDATED;
if (kr_data->serdes_obj->tx_deemph_inc(
kr_data->serdes_obj,
kr_data->lane,
param) == 0)
status = C72_CSTATE_MAX;
break;
case AL_PHY_KR_COEF_UP_DEC:
status = C72_CSTATE_UPDATED;
if (kr_data->serdes_obj->tx_deemph_dec(
kr_data->serdes_obj,
kr_data->lane,
param) == 0)
status = C72_CSTATE_MIN;
break;
default: /* 3=reserved */
break;
}
return (status);
}
/*
* Inspect the received coefficient update request and update all coefficients
* in the serdes accordingly.
*/
static void
al_eth_coeff_req_handle(struct al_eth_kr_data *kr_data,
struct al_eth_kr_coef_up_data *lpcoeff)
{
struct al_eth_kr_status_report_data *report = &kr_data->status_report;
/* First check for Init and Preset commands. */
if ((lpcoeff->preset != 0) || (lpcoeff->initialize) != 0) {
kr_data->serdes_obj->tx_deemph_preset(
kr_data->serdes_obj,
kr_data->lane);
/*
* in case of preset c(0) should be set to maximum and both c(1)
* and c(-1) should be updated
*/
report->c_minus = C72_CSTATE_UPDATED;
report->c_plus = C72_CSTATE_UPDATED;
report->c_zero = C72_CSTATE_MAX;
return;
}
/*
* in case preset and initialize are false need to perform per
* coefficient action.
*/
report->c_minus = al_eth_lt_coeff_set(kr_data,
AL_SERDES_TX_DEEMP_C_MINUS, lpcoeff->c_minus);
report->c_zero = al_eth_lt_coeff_set(kr_data,
AL_SERDES_TX_DEEMP_C_ZERO, lpcoeff->c_zero);
report->c_plus = al_eth_lt_coeff_set(kr_data,
AL_SERDES_TX_DEEMP_C_PLUS, lpcoeff->c_plus);
al_dbg("%s: c(0) = 0x%x c(-1) = 0x%x c(1) = 0x%x\n",
__func__, report->c_zero, report->c_plus, report->c_minus);
}
static void
al_eth_kr_lt_receiver_task_init(struct al_eth_kr_data *kr_data)
{
al_memset(&kr_data->last_lpcoeff, 0,
sizeof(struct al_eth_kr_coef_up_data));
al_memset(&kr_data->status_report, 0,
sizeof(struct al_eth_kr_status_report_data));
}
static boolean_t
al_eth_lp_coeff_up_change(struct al_eth_kr_data *kr_data,
struct al_eth_kr_coef_up_data *lpcoeff)
{
struct al_eth_kr_coef_up_data *last_lpcoeff = &kr_data->last_lpcoeff;
if (al_memcmp(last_lpcoeff, lpcoeff,
sizeof(struct al_eth_kr_coef_up_data)) == 0) {
return (FALSE);
}
al_memcpy(last_lpcoeff, lpcoeff, sizeof(struct al_eth_kr_coef_up_data));
return (TRUE);
}
/*
* Run the receiver task for one cycle.
* The receiver task continuously inspects the received coefficient update
* requests and acts upon.
*
* @return <0 if error occur
*/
static int
al_eth_kr_lt_receiver_task_run(struct al_eth_kr_data *kr_data)
{
struct al_eth_kr_coef_up_data new_lpcoeff;
/*
* First inspect status of the link. It may have dropped frame lock as
* the remote did some reconfiguration of its serdes.
* Then we simply have nothing to do and return immediately as caller
* will call us continuously until lock comes back.
*/
if (al_eth_kr_receiver_frame_lock_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0) != 0) {
return (0);
}
/* check if a new update command was received */
al_eth_lp_coeff_up_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0, &new_lpcoeff);
if (al_eth_lp_coeff_up_change(kr_data, &new_lpcoeff) != 0) {
/* got some new coefficient update request. */
al_eth_coeff_req_handle(kr_data, &new_lpcoeff);
}
return (0);
}
/******************************** transmitter side ***************************/
static int
al_eth_kr_lt_transmitter_task_init(struct al_eth_kr_data *kr_data)
{
int i;
int rc;
unsigned int temp_val;
for (i = 0; i < QARRAY_SIZE; i++)
kr_data->qarray[i] = 0;
kr_data->qarray_cnt = 0;
kr_data->algo_state = TX_INIT;
kr_data->curr_coeff = COEFF_TO_MANIPULATE; /* first coeff to test. */
kr_data->coeff_status_step = C72_CSTATE_NOT_UPDATED;
kr_data->end_steps_cnt = QARRAY_SIZE-1; /* go back to first entry */
/*
* Perform measure eye here to run the rx equalizer
* for the first time to get init values
*/
rc = kr_data->serdes_obj->eye_measure_run(
kr_data->serdes_obj,
kr_data->lane,
AL_ETH_KR_EYE_MEASURE_TIMEOUT,
&temp_val);
if (rc != 0) {
al_warn("%s: Failed to run Rx equalizer (rc = 0x%x)\n",
__func__, rc);
return (rc);
}
return (0);
}
static boolean_t
al_eth_kr_lt_all_not_updated(struct al_eth_kr_status_report_data *report)
{
if ((report->c_zero == C72_CSTATE_NOT_UPDATED) &&
(report->c_minus == C72_CSTATE_NOT_UPDATED) &&
(report->c_plus == C72_CSTATE_NOT_UPDATED)) {
return (TRUE);
}
return (FALSE);
}
static void
al_eth_kr_lt_coef_set(struct al_eth_kr_coef_up_data *ldcoeff,
enum al_eth_kr_coef coef, enum al_eth_kr_cl72_coef_op op)
{
switch (coef) {
case AL_ETH_KR_COEF_C_MINUS:
ldcoeff->c_minus = op;
break;
case AL_ETH_KR_COEF_C_PLUS:
ldcoeff->c_plus = op;
break;
case AL_ETH_KR_COEF_C_ZERO:
ldcoeff->c_zero = op;
break;
}
}
static enum al_eth_kr_cl72_cstate
al_eth_kr_lt_coef_report_get(struct al_eth_kr_status_report_data *report,
enum al_eth_kr_coef coef)
{
switch (coef) {
case AL_ETH_KR_COEF_C_MINUS:
return (report->c_minus);
case AL_ETH_KR_COEF_C_PLUS:
return (report->c_plus);
case AL_ETH_KR_COEF_C_ZERO:
return (report->c_zero);
}
return (0);
}
/*
* Run the transmitter_task for one cycle.
*
* @return <0 if error occurs
*/
static int
al_eth_kr_lt_transmitter_task_run(struct al_eth_kr_data *kr_data)
{
struct al_eth_kr_status_report_data report;
unsigned int coeff_status_cur;
struct al_eth_kr_coef_up_data ldcoeff = { 0, 0, 0, 0, 0 };
unsigned int val;
int i;
enum al_eth_kr_mac_lt_state nextstate;
int rc = 0;
/*
* do nothing if currently there is no frame lock (which may happen
* when remote updates its analogs).
*/
if (al_eth_kr_receiver_frame_lock_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0) == 0) {
return (0);
}
al_eth_lp_status_report_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0, &report);
/* extract curr status of the coefficient in use */
coeff_status_cur = al_eth_kr_lt_coef_report_get(&report,
kr_data->curr_coeff);
nextstate = kr_data->algo_state; /* default we stay in curr state; */
switch (kr_data->algo_state) {
case TX_INIT:
/* waiting for start */
if (al_eth_kr_startup_proto_prog_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0) != 0) {
/* training is on and frame lock */
nextstate = WAIT_BEGIN;
}
break;
case WAIT_BEGIN:
kr_data->qarray_cnt = 0;
kr_data->curr_coeff = COEFF_TO_MANIPULATE;
kr_data->coeff_status_step = C72_CSTATE_NOT_UPDATED;
coeff_status_cur = C72_CSTATE_NOT_UPDATED;
kr_data->end_steps_cnt = QARRAY_SIZE-1;
/* Wait for not_updated for all coefficients from remote */
if (al_eth_kr_lt_all_not_updated(&report) != 0) {
ldcoeff.preset = TRUE;
nextstate = DO_PRESET;
}
break;
case DO_PRESET:
/*
* Send PRESET and wait for for updated for all
* coefficients from remote
*/
if (al_eth_kr_lt_all_not_updated(&report) == 0)
nextstate = DO_HOLD;
else /* as long as the lp didn't response to the preset
* we should continue sending it */
ldcoeff.preset = TRUE;
break;
case DO_HOLD:
/*
* clear the PRESET, issue HOLD command and wait for
* hold handshake
*/
if (al_eth_kr_lt_all_not_updated(&report) != 0)
nextstate = QMEASURE;
break;
case QMEASURE:
/* makes a measurement and fills the new value into the array */
rc = kr_data->serdes_obj->eye_measure_run(
kr_data->serdes_obj,
kr_data->lane,
AL_ETH_KR_EYE_MEASURE_TIMEOUT,
&val);
if (rc != 0) {
al_warn("%s: Rx eye measurement failed\n", __func__);
return (rc);
}
al_dbg("%s: Rx Measure eye returned 0x%x\n", __func__, val);
/* put the new value into the array at the top. */
for (i = 0; i < QARRAY_SIZE-1; i++)
kr_data->qarray[i] = kr_data->qarray[i+1];
kr_data->qarray[QARRAY_SIZE-1] = val;
if (kr_data->qarray_cnt < QARRAY_SIZE)
kr_data->qarray_cnt++;
nextstate = QCHECK;
break;
case QCHECK:
/* check if we reached the best link quality yet. */
if (kr_data->qarray_cnt < QARRAY_SIZE) {
/* keep going until at least the history is
* filled. check that we can keep going or if
* coefficient has already reached minimum.
*/
if (kr_data->coeff_status_step == C72_CSTATE_MIN)
nextstate = COEFF_DONE;
else {
/*
* request a DECREMENT of the
* coefficient under control
*/
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff, AL_PHY_KR_COEF_UP_DEC);
nextstate = DO_NEXT_TRY;
}
} else {
/*
* check if current value and last both are worse than
* the 2nd last. This we take as an ending condition
* assuming the minimum was reached two tries before
* so we will now go back to that point.
*/
if ((kr_data->qarray[0] < kr_data->qarray[1]) &&
(kr_data->qarray[0] < kr_data->qarray[2])) {
/*
* request a INCREMENT of the
* coefficient under control
*/
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff, AL_PHY_KR_COEF_UP_INC);
/* start going back to the maximum */
nextstate = END_STEPS;
if (kr_data->end_steps_cnt > 0)
kr_data->end_steps_cnt--;
} else {
if (kr_data->coeff_status_step ==
C72_CSTATE_MIN) {
nextstate = COEFF_DONE;
} else {
/*
* request a DECREMENT of the
* coefficient under control
*/
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff,
AL_PHY_KR_COEF_UP_DEC);
nextstate = DO_NEXT_TRY;
}
}
}
break;
case DO_NEXT_TRY:
/*
* save the status when we issue the DEC step to the remote,
* before the HOLD is done again.
*/
kr_data->coeff_status_step = coeff_status_cur;
if (coeff_status_cur != C72_CSTATE_NOT_UPDATED)
nextstate = DO_HOLD; /* go to next measurement round */
else
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff, AL_PHY_KR_COEF_UP_DEC);
break;
/*
* Coefficient iteration completed, go back to the optimum step
* In this algorithm we assume 2 before curr was best hence need to do
* two INC runs.
*/
case END_STEPS:
if (coeff_status_cur != C72_CSTATE_NOT_UPDATED)
nextstate = END_STEPS_HOLD;
else
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff, AL_PHY_KR_COEF_UP_INC);
break;
case END_STEPS_HOLD:
if (coeff_status_cur == C72_CSTATE_NOT_UPDATED) {
if (kr_data->end_steps_cnt != 0) {
/*
* request a INCREMENT of the
* coefficient under control
*/
al_eth_kr_lt_coef_set(&ldcoeff,
kr_data->curr_coeff, AL_PHY_KR_COEF_UP_INC);
/* go 2nd time - dec the end step count */
nextstate = END_STEPS;
if (kr_data->end_steps_cnt > 0)
kr_data->end_steps_cnt--;
} else {
nextstate = COEFF_DONE;
}
}
break;
case COEFF_DONE:
/*
* now this coefficient is done.
* We can now either choose to finish here,
* or keep going with another coefficient.
*/
if ((int)kr_data->curr_coeff < COEFF_TO_MANIPULATE_LAST) {
int i;
for (i = 0; i < QARRAY_SIZE; i++)
kr_data->qarray[i] = 0;
kr_data->qarray_cnt = 0;
kr_data->end_steps_cnt = QARRAY_SIZE-1;
kr_data->coeff_status_step = C72_CSTATE_NOT_UPDATED;
kr_data->curr_coeff++;
al_dbg("[%s]: doing next coefficient: %d ---\n\n",
kr_data->adapter->name, kr_data->curr_coeff);
nextstate = QMEASURE;
} else {
nextstate = SET_READY;
}
break;
case SET_READY:
/*
* our receiver is ready for data.
* no training will occur any more.
*/
kr_data->status_report.receiver_ready = TRUE;
/*
* in addition to the status we transmit, we also must tell our
* local hardware state-machine that we are done, so the
* training can eventually complete when the remote indicates
* it is ready also. The hardware will then automatically
* give control to the PCS layer completing training.
*/
al_eth_receiver_ready_set(kr_data->adapter,
AL_ETH_AN__LT_LANE_0);
nextstate = TX_DONE;
break;
case TX_DONE:
break; /* nothing else to do */
default:
nextstate = kr_data->algo_state;
break;
}
/*
* The status we want to transmit to remote.
* Note that the status combines the receiver status of all coefficients
* with the transmitter's rx ready status.
*/
if (kr_data->algo_state != nextstate) {
al_dbg("[%s] [al_eth_kr_lt_transmit_run] STM changes %s -> %s: "
" Qarray=%d/%d/%d\n", kr_data->adapter->name,
al_eth_kr_mac_sm_name[kr_data->algo_state],
al_eth_kr_mac_sm_name[nextstate],
kr_data->qarray[0], kr_data->qarray[1], kr_data->qarray[2]);
}
kr_data->algo_state = nextstate;
/*
* write fields for transmission into hardware.
* Important: this must be done always, as the receiver may have
* received update commands and wants to return its status.
*/
al_eth_ld_coeff_up_set(kr_data->adapter, AL_ETH_AN__LT_LANE_0, &ldcoeff);
al_eth_ld_status_report_set(kr_data->adapter, AL_ETH_AN__LT_LANE_0,
&kr_data->status_report);
return (0);
}
/*****************************************************************************/
static int
al_eth_kr_run_lt(struct al_eth_kr_data *kr_data)
{
unsigned int cnt;
int ret = 0;
boolean_t page_received = FALSE;
boolean_t an_completed = FALSE;
boolean_t error = FALSE;
boolean_t training_failure = FALSE;
al_eth_kr_lt_initialize(kr_data->adapter, AL_ETH_AN__LT_LANE_0);
if (al_eth_kr_lt_frame_lock_wait(kr_data->adapter, AL_ETH_AN__LT_LANE_0,
AL_ETH_KR_FRAME_LOCK_TIMEOUT) == TRUE) {
/*
* when locked, for the first time initialize the receiver and
* transmitter tasks to prepare it for detecting coefficient
* update requests.
*/
al_eth_kr_lt_receiver_task_init(kr_data);
ret = al_eth_kr_lt_transmitter_task_init(kr_data);
if (ret != 0)
goto error;
cnt = 0;
do {
ret = al_eth_kr_lt_receiver_task_run(kr_data);
if (ret != 0)
break; /* stop the link training */
ret = al_eth_kr_lt_transmitter_task_run(kr_data);
if (ret != 0)
break; /* stop the link training */
cnt++;
DELAY(100);
} while ((al_eth_kr_startup_proto_prog_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0)) && (cnt <= AL_ETH_KR_LT_MAX_ROUNDS));
training_failure =
al_eth_kr_training_status_fail_get(kr_data->adapter,
AL_ETH_AN__LT_LANE_0);
al_dbg("[%s] training ended after %d rounds, failed = %s\n",
kr_data->adapter->name, cnt,
(training_failure) ? "Yes" : "No");
if (training_failure || cnt > AL_ETH_KR_LT_MAX_ROUNDS) {
al_warn("[%s] Training Fail: status: %s, timeout: %s\n",
kr_data->adapter->name,
(training_failure) ? "Failed" : "OK",
(cnt > AL_ETH_KR_LT_MAX_ROUNDS) ? "Yes" : "No");
/*
* note: link is now disabled,
* until training becomes disabled (see below).
*/
ret = EIO;
goto error;
}
} else {
al_info("[%s] FAILED: did not achieve initial frame lock...\n",
kr_data->adapter->name);
ret = EIO;
goto error;
}
/*
* ensure to stop link training at the end to allow normal PCS
* datapath to operate in case of training failure.
*/
al_eth_kr_lt_stop(kr_data->adapter, AL_ETH_AN__LT_LANE_0);
cnt = AL_ETH_KR_LT_DONE_TIMEOUT;
while (an_completed == FALSE) {
al_eth_kr_an_status_check(kr_data->adapter, &page_received,
&an_completed, &error);
DELAY(1);
if ((cnt--) == 0) {
al_info("%s: wait for an complete timeout!\n", __func__);
ret = ETIMEDOUT;
goto error;
}
}
error:
al_eth_kr_an_stop(kr_data->adapter);
return (ret);
}
/* execute Autonegotiation process */
int al_eth_an_lt_execute(struct al_hal_eth_adapter *adapter,
struct al_serdes_grp_obj *serdes_obj,
enum al_serdes_lane lane,
struct al_eth_an_adv *an_adv,
struct al_eth_an_adv *partner_adv)
{
struct al_eth_kr_data kr_data;
int rc;
struct al_serdes_adv_rx_params rx_params;
al_memset(&kr_data, 0, sizeof(struct al_eth_kr_data));
kr_data.adapter = adapter;
kr_data.serdes_obj = serdes_obj;
kr_data.lane = lane;
/*
* the link training progress will run rx equalization so need to make
* sure rx parameters is not been override
*/
rx_params.override = FALSE;
kr_data.serdes_obj->rx_advanced_params_set(
kr_data.serdes_obj,
kr_data.lane,
&rx_params);
rc = al_eth_kr_an_run(&kr_data, an_adv, partner_adv);
if (rc != 0) {
al_eth_kr_lt_stop(adapter, AL_ETH_AN__LT_LANE_0);
al_eth_kr_an_stop(adapter);
al_dbg("%s: auto-negotiation failed!\n", __func__);
return (rc);
}
if (partner_adv->technology != AL_ETH_AN_TECH_10GBASE_KR) {
al_eth_kr_lt_stop(adapter, AL_ETH_AN__LT_LANE_0);
al_eth_kr_an_stop(adapter);
al_dbg("%s: link partner isn't 10GBASE_KR.\n", __func__);
return (rc);
}
rc = al_eth_kr_run_lt(&kr_data);
if (rc != 0) {
al_eth_kr_lt_stop(adapter, AL_ETH_AN__LT_LANE_0);
al_eth_kr_an_stop(adapter);
al_dbg("%s: Link-training failed!\n", __func__);
return (rc);
}
return (0);
}