freebsd-dev/sys/pci/if_wxreg.h
2000-01-25 04:11:33 +00:00

316 lines
9.6 KiB
C

/*
* Copyright (c) 1999, Traakan Software
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#define WX_VENDOR_INTEL 0x8086
#define WX_PRODUCT_82452 0x1000
#define WX_MMBA 0x10
#define MWI 0x10 /* Memory Write Invalidate */
#define WX_CACHELINE_SIZE 0x20
/*
* Information about this chipset gathered from a released Intel Linux driver,
* which was clearly a port of an NT driver.
*/
/*
* Various Descriptor Structures.
* These are all in little endian format (for now).
*/
typedef struct {
u_int32_t lowpart;
u_int32_t highpart;
} wxpa_t, wxrp_t;
/*
* Receive Descriptor.
* The base address of a receive descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address; /* physical address of buffer */
u_int16_t length;
u_int16_t csum;
u_int8_t status;
u_int8_t errors;
u_int16_t special;
} wxrd_t;
#define RDSTAT_DD 0x1 /* descriptor done */
#define RDSTAT_EOP 0x2 /* end of packet */
#define RDSTAT_RSVD 0x74 /* reserved bits */
#define RDERR_CRC 0x1 /* CRC Error */
#define RDERR_SE 0x2 /* Symbol Error */
#define RDERR_SEQ 0x4 /* Sequence Error */
/*
* Transmit Descriptor
* The base address of a transmit descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address;
u_int16_t length;
u_int8_t cso; /* checksum offset */
u_int8_t cmd; /* cmd */
u_int8_t status; /* status */
u_int8_t css; /* checksum start */
u_int16_t special;
} wxtd_t;
#define TXCMD_EOP 0x1 /* last packet */
#define TXCMD_IFCS 0x2 /* insert FCS */
#define TXCMD_IC 0x4 /* insert checksum */
#define TXCMD_RS 0x8 /* report status */
#define TXCMD_RPS 0x10 /* report packet sent */
#define TXCMD_SM 0x20 /* symbol mode */
#define TXCMD_IDE 0x80 /* interrupt delay enable */
#define TXSTS_DD 0x1 /* descriptor done */
#define TXSTS_EC 0x2 /* excess collisions */
#define TXSTS_LC 0x4 /* late collision */
/*
* This device can only be accessed via memory space.
*/
/*
* Register access via offsets.
*/
#define WXREG_DCR 0x00000000
#define WXREG_DSR 0x00000008
#define WXREG_EECDR 0x00000010
#define WXREG_FCAL 0x00000028
#define WXREG_FCAH 0x0000002C
#define WXREG_FCT 0x00000030
#define WXREG_VET 0x00000038
#define WXREG_RAL_BASE 0x00000040
#define WXREG_RAL_LO(x) (WXREG_RAL_BASE + ((x) << 3))
#define WXREG_RAL_HI(x) (WXREG_RAL_LO(x) + 4)
#define WXREG_ICR 0x000000c0
#define WXREG_ICS 0x000000c8
#define WXREG_IMASK 0x000000d0
#define WXREG_IMCLR 0x000000d8
#define WXREG_RCTL 0x00000100
#define WXREG_RDTR0 0x00000108
#define WXREG_RDBA0_LO 0x00000110
#define WXREG_RDBA0_HI 0x00000114
#define WXREG_RDLEN0 0x00000118
#define WXREG_RDH0 0x00000120
#define WXREG_RDT0 0x00000128
#define WXREG_RDTR1 0x00000130
#define WXREG_RDBA1_LO 0x00000138
#define WXREG_RDBA1_HI 0x0000013C
#define WXREG_RDLEN1 0x00000140
#define WXREG_RDH1 0x00000148
#define WXREG_RDT1 0x00000150
#define WXREG_FLOW_RCV_HI 0x00000160
#define WXREG_FLOW_RCV_LO 0x00000168
#define WXREG_FLOW_XTIMER 0x00000170
#define WXREG_XMIT_CFGW 0x00000178
#define WXREG_RECV_CFGW 0x00000180
#define WXREG_MTA 0x00000200
#define WXREG_TCTL 0x00000400
#define WXREG_TQSA_LO 0x00000408
#define WXREG_TQSA_HI 0x0000040C
#define WXREG_TIPG 0x00000410
#define WXREG_TQC 0x00000418
#define WXREG_TDBA_LO 0x00000420
#define WXREG_TDBA_HI 0x00000424
#define WXREG_TDLEN 0x00000428
#define WXREG_TDH 0x00000430
#define WXREG_TDT 0x00000438
#define WXREG_TIDV 0x00000440
#define WXREG_VFTA 0x00000600
#define WX_RAL_TAB_SIZE 16
#define WX_RAL_AV 0x80000000
#define WX_MC_TAB_SIZE 128
#define WX_VLAN_TAB_SIZE 128
/*
* Device Control Register Defines
*/
#define WXDCR_FD 0x1 /* full duplex */
#define WXDCR_BEM 0x2 /* big endian mode */
#define WXDCR_FAIR 0x4 /* 1->Fairness, 0->Receive Priority */
#define WXDCR_LRST 0x8 /* Link Reset */
#define WXDCR_SLU 0x40 /* Set Link Up */
#define WXDCR_ILOS 0x80 /* Invert Loss-of-Signal */
#define WXDCR_SWDPINS_SHIFT 18
#define WXDCR_SWDPINS_MASK 0xf
#define WXDCR_SWDPIN0 (1 << 18)
#define WXDCR_SWDPIN1 (1 << 19)
#define WXDCR_SWDPIN2 (1 << 20)
#define WXDCR_SWDPIN3 (1 << 21)
#define WXDCR_SWDPIO_SHIFT 22
#define WXDCR_SWDPIO_MASK 0xf
#define WXDCR_SWDPIO0 (1 << 22)
#define WXDCR_SWDPIO1 (1 << 23)
#define WXDCR_SWDPIO2 (1 << 24)
#define WXDCR_SWDPIO3 (1 << 25)
#define WXDCR_RST 0x04000000 /* Device Reset (self clearing) */
#define WXDCR_RFCE 0x08000000 /* Receive Flow Control Enable */
#define WXDCR_TFCE 0x10000000 /* Transmit Flow Control Enable */
#define WXDCR_RTE 0x20000000 /* Routing Tag Enable */
#define WXDCR_VME 0x40000000 /* VLAN Mode Enable */
/*
* Device Status Register Defines
*/
#define WXDSR_FD 0x1 /* full duplex */
#define WXDSR_LU 0x2 /* link up */
#define WXDSR_TXCLK 0x4 /* transmit clock running */
#define WXDSR_RBCLK 0x8 /* receive clock running */
#define WXDSR_TXOFF 0x10 /* transmit paused */
/*
* EEPROM Register Defines
*/
#define WXEECD_SK 0x1 /* enable clock */
#define WXEECD_CS 0x2 /* chip select */
#define WXEECD_DI 0x4 /* data input */
#define WXEECD_DO 0x8 /* data output */
#define EEPROM_READ_OPCODE 0x6
/*
* Constant Flow Control Frame MAC Address and Type values.
*/
#define FC_FRM_CONST_LO 0x00C28001
#define FC_FRM_CONST_HI 0x0100
#define FC_TYP_CONST 0x8808
/*
* Bits pertinent for the Receive Address register pairs. The low address
* is the low 32 bits of a 48 bit MAC address. The high address contains
* bits 32-47 of the 48 bit MAC address. The top bit in the high address
* is a 'valid' bit.
*/
#define WXRAH_RDR1 0x40000000 /* second receive descriptor ring */
#define WXRAH_VALID 0x80000000
/*
* Interrupt Cause Bits
*/
#define WXISR_TXDW 0x1 /* transmit descriptor written back */
#define WXISR_TXQE 0x2 /* transmit queue empty */
#define WXISR_LSC 0x4 /* link status change */
#define WXISR_RXSEQ 0x8 /* receive sequence error */
#define WXISR_RXDMT0 0x10 /* receiver ring 0 getting empty */
#define WXISR_RXO 0x40 /* receiver overrun */
#define WXISR_RXT0 0x80 /* ring 0 receiver timer interrupt */
#define WXISR_PCIE 0x200 /* ?? Probably PCI interface error... */
#define WXIENABLE_DEFAULT \
(WXISR_RXO|WXISR_RXT0|WXISR_RXDMT0|WXISR_RXSEQ|WXISR_LSC|WXISR_PCIE)
#define WXDISABLE 0xffffffff
/*
* Receive Control Register bits.
*/
#define WXRCTL_RST 0x1 /* receiver reset */
#define WXRCTL_EN 0x2 /* receiver enable */
#define WXRCTL_SBP 0x4 /* store bad packets */
#define WXRCTL_UPE 0x8 /* unicast promiscuos mode */
#define WXRCTL_MPE 0x10 /* multicast promiscuous mode */
#define WXRCTL_LPE 0x20 /* large packet enable */
#define WXRCTL_BAM 0x8000 /* broadcast accept mode */
#define WXRCTL_2KRBUF (0 << 16) /* 2-Kbyte Receive Buffers */
#define WXRCTL_1KRBUF (1 << 16) /* 1-Kbyte Receive Buffers */
#define WXRCTL_512BRBUF (2 << 16) /* 512 Byte Receive Buffers */
#define WXRCTL_256BRBUF (3 << 16) /* 256 Byte Receive Buffers */
/*
* Receive Delay Timer Register bits.
*/
#define WXRDTR_FPD 0x80000000 /* flush partial descriptor */
/*
* Transmit Configuration Word defines
*/
#define WXTXCW_FD 0x00000020 /* Full Duplex */
#define WXTXCW_PMASK 0x00000180 /* pause mask */
#define WXTXCW_ANE 0x80000000 /* AutoNegotiate */
#define WXTXCW_DEFAULT 0x800001A0
/*
* Transmit Control Register defines.
*/
#define WXTCTL_RST 0x1 /* transmitter reset */
#define WXTCTL_EN 0x2 /* transmitter enable */
#define WXTCTL_PSP 0x8 /* pad short packets */
#define WXTCTL_CT(x) (((x) & 0xff) << 4) /* 4:11 - Collision Threshold */
#define WXTCTL_COLD(x) (((x) & 0x3ff) << 12) /* 12:21 - Collision Distance */
#define WXTCTL_SWXOFF (1 << 22) /* Software XOFF */
#define WX_COLLISION_THRESHOLD 15
#define WX_FDX_COLLISION_DX 64
#define WX_HDX_COLLISION_DX 512
/*
* Miscellaneous
*/
#define WX_EEPROM_MAC_OFF 0
/*
* Offset for Initialization Control Word #1
*/
#define WX_EEPROM_CTLR1_OFF 0xA
#define WX_EEPROM_CTLR1_FD (1 << 10)
#define WX_EEPROM_CTLR1_SWDPIO_SHIFT 5
#define WX_EEPROM_CTLR1_ILOS (1 << 4)
#define WX_XTIMER_DFLT 0x100
#define WX_RCV_FLOW_HI_DFLT 0x8000
#define WX_RCV_FLOW_LO_DFLT 0x4000
#define WX_TIPG_DFLT (10 | (2 << 10) | (10 << 20))
#define WX_CRC_LENGTH 4
/*
* Hardware cannot transmit less than 16 bytes. It also cannot
* successfully receive less than 60 bytes.
*/
#define WX_MIN_XPKT_SIZE 16
#define WX_MIN_RPKT_SIZE 60
#define WX_MAX_PKT_SIZE 1514
#define WX_MAX_PKT_SIZE_JUMBO 9014