freebsd-dev/tools/regression/iscsi/iscsi-test.sh
Edward Tomasz Napierala 009ea47eb2 Bring in the new iSCSI target and initiator.
Reviewed by:	ken (parts)
Approved by:	re (delphij)
Sponsored by:	FreeBSD Foundation
2013-09-14 15:29:06 +00:00

795 lines
19 KiB
Bash

#!/bin/sh
#
# Copyright (c) 2012 The FreeBSD Foundation
# All rights reserved.
#
# This software was developed by Edward Tomasz Napierala under sponsorship
# from the FreeBSD Foundation.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
#
# This expects that the iSCSI server being tested is at $TARGETIP and exports
# two targets: $TARGET1 and $TARGET2; the former requiring no authentication,
# and the latter using CHAP with user $USER and secret $SECRET. Discovery
# must be permitted without authentication. Each target must contain exactly
# two LUNs, 4GB each. For example, ctl.conf(5) should look like this:
#
# auth-group meh {
# chap user secretsecret
# }
#
# portal-group meh {
# listen 0.0.0.0
# discovery-auth-group no-authentication
# }
#
# target iqn.2012-06.com.example:1 {
# auth-group no-authentication
# portal-group meh
# lun 0 {
# path /var/tmp/example_t1l0
# size 4G
# }
# lun 1 {
# path /var/tmp/example_t1l1
# size 4G
# }
# }
#
# target iqn.2012-06.com.example:2 {
# auth-group meh
# portal-group meh
# lun 0 {
# path /var/tmp/example_t2l0
# size 4G
# }
# lun 1 {
# path /var/tmp/example_t2l1
# size 4G
# }
# }
#
# Remember to create the backing files (/var/tmp/example_t1l0 etcc)
#
# On the initiator, $MNTDIR will be used for testing.
#
TARGETIP=192.168.56.101
TARGET1=iqn.2012-06.com.example:1
TARGET2=iqn.2012-06.com.example:2
USER=user
SECRET=secretsecret
MNTDIR=/mnt
TMPDIR=/tmp
die() {
echo "$*"
exit 1
}
case `uname` in
FreeBSD)
LUN0=/dev/da0
LUN1=/dev/da1
LUN2=/dev/da2
LUN3=/dev/da3
ZFSPOOL=iscsipool
;;
Linux)
LUN0=/dev/sdb
LUN1=/dev/sdc
LUN2=/dev/sdd
LUN3=/dev/sde
;;
SunOS)
# LUN names are being set later, during attach.
ZFSPOOL=iscsipool
;;
*)
die "unsupported system"
;;
esac
check() {
echo "# $@" > /dev/stderr
$@ || die "$@ failed"
}
banner() {
echo "Will try to attach to $TARGET1 and $TARGET2 on $TARGETIP,"
echo "user $USER, secret $SECRET. Will use mountpoint $MNTDIR, temporary dir $TMPDIR,"
if [ -n "$LUN0" ]; then
echo "scratch disks $LUN0, $LUN1, $LUN2, $LUN3."
else
echo "scratch disks unknown at this stage."
fi
echo
echo "This script is NOT safe to run on multiuser system."
echo
echo "Press ^C to interrupt; will proceed in 5 seconds."
sleep 5
}
test_discovery_freebsd_9() {
kldload iscsi_initiator
check iscontrol -dt $TARGETIP > $TMPDIR/discovered
cat $TMPDIR/discovered
echo "TargetName=$TARGET1" > $TMPDIR/expected
echo "TargetName=$TARGET2" >> $TMPDIR/expected
check cmp $TMPDIR/expected $TMPDIR/discovered
rm -f $TMPDIR/expected $TMPDIR/discovered
}
test_discovery_freebsd() {
/etc/rc.d/iscsid onestart
check iscsictl -Ad $TARGETIP
sleep 1
iscsictl | awk '{ print $1 }' | sort > $TMPDIR/discovered
printf "Target\n$TARGET1\n$TARGET2\n" | sort > $TMPDIR/expected
check cmp $TMPDIR/expected $TMPDIR/discovered
rm -f $TMPDIR/expected $TMPDIR/discovered
check iscsictl -Ra
sleep 1
}
test_discovery_linux() {
cat > /etc/iscsi/iscsid.conf << END
discovery.sendtargets.auth.authmethod = None
node.startup = manual
END
check iscsiadm -m discovery -t sendtargets -p $TARGETIP > $TMPDIR/discovered
cat $TMPDIR/discovered
echo "$TARGETIP:3260,-1 $TARGET1" > $TMPDIR/expected
echo "$TARGETIP:3260,-1 $TARGET2" >> $TMPDIR/expected
check cmp $TMPDIR/expected $TMPDIR/discovered
rm -f $TMPDIR/expected $TMPDIR/discovered
}
test_discovery_solaris() {
check iscsiadm add discovery-address $TARGETIP
check iscsiadm modify discovery --sendtargets enable
check iscsiadm modify discovery --static enable
check iscsiadm list target | awk '/^Target/ { print $2 }' | sort > $TMPDIR/discovered
check iscsiadm remove discovery-address $TARGETIP
cat $TMPDIR/discovered
echo "$TARGET1" > $TMPDIR/expected
echo "$TARGET2" >> $TMPDIR/expected
check cmp $TMPDIR/expected $TMPDIR/discovered
rm -f $TMPDIR/expected $TMPDIR/discovered
}
test_discovery() {
echo "*** discovery test ***"
case `uname` in
FreeBSD)
case `uname -r` in
9*)
test_discovery_freebsd_9
;;
*)
test_discovery_freebsd
;;
esac
;;
Linux)
test_discovery_linux
;;
SunOS)
test_discovery_solaris
;;
*)
die "unsupported system"
;;
esac
}
test_attach_freebsd_9() {
[ ! -e LUN0 ] || die "$LUN0 already exists"
[ ! -e LUN1 ] || die "$LUN1 already exists"
[ ! -e LUN2 ] || die "$LUN2 already exists"
[ ! -e LUN3 ] || die "$LUN3 already exists"
cat > $TMPDIR/iscsi.conf << END
target1 {
TargetName = $TARGET1
TargetAddress = $TARGETIP
}
target2 {
TargetName = $TARGET2
TargetAddress = $TARGETIP
AuthMethod = CHAP
chapIName = $USER
chapSecret = $SECRET
}
END
check iscontrol -c $TMPDIR/iscsi.conf -n target1
check iscontrol -c $TMPDIR/iscsi.conf -n target2
echo "Waiting 10 seconds for attach to complete."
sleep 10
[ -e $LUN0 ] || die "$LUN0 doesn't exist"
[ -e $LUN1 ] || die "$LUN1 doesn't exist"
[ -e $LUN2 ] || die "$LUN2 doesn't exist"
[ -e $LUN3 ] || die "$LUN3 doesn't exist"
rm $TMPDIR/iscsi.conf
}
test_attach_freebsd() {
[ ! -e LUN0 ] || die "$LUN0 already exists"
[ ! -e LUN1 ] || die "$LUN1 already exists"
[ ! -e LUN2 ] || die "$LUN2 already exists"
[ ! -e LUN3 ] || die "$LUN3 already exists"
cat > $TMPDIR/iscsi.conf << END
target1 {
TargetName = $TARGET1
TargetAddress = $TARGETIP
}
target2 {
TargetName = $TARGET2
TargetAddress = $TARGETIP
AuthMethod = CHAP
chapIName = $USER
chapSecret = $SECRET
}
END
check iscsictl -Ac $TMPDIR/iscsi.conf -n target1
check iscsictl -Ac $TMPDIR/iscsi.conf -n target2
echo "Waiting 10 seconds for attach to complete."
sleep 10
[ -e $LUN0 ] || die "$LUN0 doesn't exist"
[ -e $LUN1 ] || die "$LUN1 doesn't exist"
[ -e $LUN2 ] || die "$LUN2 doesn't exist"
[ -e $LUN3 ] || die "$LUN3 doesn't exist"
rm $TMPDIR/iscsi.conf
}
test_attach_linux() {
check iscsiadm --mode node --targetname "$TARGET1" -p "$TARGETIP:3260" --op=update --name node.session.auth.authmethod --value=None
check iscsiadm --mode node --targetname "$TARGET1" -p "$TARGETIP:3260" --login
check iscsiadm --mode node --targetname "$TARGET2" -p "$TARGETIP:3260" --op=update --name node.session.auth.authmethod --value=CHAP
check iscsiadm --mode node --targetname "$TARGET2" -p "$TARGETIP:3260" --op=update --name node.session.auth.username --value="$USER"
check iscsiadm --mode node --targetname "$TARGET2" -p "$TARGETIP:3260" --op=update --name node.session.auth.password --value="$SECRET"
check iscsiadm --mode node --targetname "$TARGET2" -p "$TARGETIP:3260" --login
}
test_attach_solaris() {
# XXX: How to enter the CHAP secret from the script? For now,
# just use the first target, and thus first two LUNs.
#check iscsiadm modify initiator-node --authentication CHAP
#check iscsiadm modify initiator-node --CHAP-name $USER
#check iscsiadm modify initiator-node --CHAP-secret $SECRET
iscsiadm add static-config $TARGET1,$TARGETIP
LUN0=`iscsiadm list target -S | awk '/OS Device Name/ { print $4 }' | sed -n 1p`
LUN1=`iscsiadm list target -S | awk '/OS Device Name/ { print $4 }' | sed -n 2p`
LUN0=`echo ${LUN0}2 | sed 's/rdsk/dsk/'`
LUN1=`echo ${LUN1}2 | sed 's/rdsk/dsk/'`
[ -n "$LUN0" -a -n "LUN1" ] || die "attach failed"
echo "Scratch disks: $LUN0, $LUN1"
}
test_attach() {
echo "*** attach test ***"
case `uname` in
FreeBSD)
case `uname -r` in
9*)
test_attach_freebsd_9
;;
*)
test_attach_freebsd
;;
esac
;;
Linux)
test_attach_linux
;;
SunOS)
test_attach_solaris
;;
*)
die "unsupported system"
;;
esac
}
test_newfs_freebsd_ufs() {
echo "*** UFS filesystem smoke test ***"
check newfs $LUN0
check newfs $LUN1
check newfs $LUN2
check newfs $LUN3
check fsck -t ufs $LUN0
check fsck -t ufs $LUN1
check fsck -t ufs $LUN2
check fsck -t ufs $LUN3
}
test_newfs_freebsd_zfs() {
echo "*** ZFS filesystem smoke test ***"
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check zpool destroy -f $ZFSPOOL
}
test_newfs_linux_ext4() {
echo "*** ext4 filesystem smoke test ***"
yes | check mkfs $LUN0
yes | check mkfs $LUN1
yes | check mkfs $LUN2
yes | check mkfs $LUN3
check fsck -f $LUN0
check fsck -f $LUN1
check fsck -f $LUN2
check fsck -f $LUN3
}
test_newfs_linux_btrfs() {
echo "*** btrfs filesystem smoke test ***"
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
}
test_newfs_solaris_ufs() {
echo "*** UFS filesystem smoke test ***"
yes | check newfs $LUN0
yes | check newfs $LUN1
check fsck -F ufs $LUN0
check fsck -F ufs $LUN1
}
test_newfs_solaris_zfs() {
echo "*** ZFS filesystem smoke test ***"
check zpool create -f $ZFSPOOL $LUN0 $LUN1
check zpool destroy -f $ZFSPOOL
}
test_newfs() {
case `uname` in
FreeBSD)
test_newfs_freebsd_ufs
test_newfs_freebsd_zfs
;;
Linux)
test_newfs_linux_ext4
test_newfs_linux_btrfs
;;
SunOS)
test_newfs_solaris_ufs
test_newfs_solaris_zfs
;;
*)
die "unsupported system"
;;
esac
}
test_cp() {
echo "*** basic filesystem test ***"
case `uname` in
FreeBSD)
check newfs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check dd if=/dev/urandom of=$MNTDIR/1 bs=1m count=500
check cp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check fsck -t ufs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check cmp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check dd if=/dev/urandom of=/$ZFSPOOL/1 bs=1m count=500
check zpool scrub $ZFSPOOL
check cp /$ZFSPOOL/1 /$ZFSPOOL/2
check cmp /$ZFSPOOL/1 /$ZFSPOOL/2
check zpool destroy -f $ZFSPOOL
;;
Linux)
yes | check mkfs $LUN0
check mount $LUN0 $MNTDIR
check dd if=/dev/urandom of=$MNTDIR/1 bs=1M count=500
check cp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check fsck -f $LUN0
check mount $LUN0 $MNTDIR
check cmp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
check mount $LUN0 $MNTDIR
check dd if=/dev/urandom of=$MNTDIR/1 bs=1M count=500
check cp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check mount $LUN0 $MNTDIR
check cmp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
;;
SunOS)
yes | check newfs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check dd if=/dev/urandom of=$MNTDIR/1 bs=1024k count=500
check cp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check fsck -yF ufs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check cmp $MNTDIR/1 $MNTDIR/2
check umount $MNTDIR
check zpool create -f $ZFSPOOL $LUN0 $LUN1
check dd if=/dev/urandom of=/$ZFSPOOL/1 bs=1024k count=500
check zpool scrub $ZFSPOOL
check cp /$ZFSPOOL/1 /$ZFSPOOL/2
check cmp /$ZFSPOOL/1 /$ZFSPOOL/2
check zpool destroy -f $ZFSPOOL
;;
*)
die "unsupported system"
;;
esac
}
test_bonnie() {
echo "*** bonnie++ ***"
case `uname` in
FreeBSD)
check newfs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check cd $MNTDIR
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check umount $MNTDIR
check fsck -t ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check cd /$ZFSPOOL
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check zpool destroy -f $ZFSPOOL
;;
Linux)
yes | check mkfs $LUN0
check mount $LUN0 $MNTDIR
check cd $MNTDIR
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check umount $MNTDIR
check fsck -f $LUN0
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
check mount $LUN0 $MNTDIR
check cd $MNTDIR
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check umount $MNTDIR
;;
SunOS)
yes | check newfs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check cd $MNTDIR
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check umount $MNTDIR
check fsck -yF ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1
check cd /$ZFSPOOL
check bonnie++ -u root -s 2g -r 1g -n0
check bonnie++ -u root -s 0
check cd -
check zpool destroy -f $ZFSPOOL
;;
*)
die "unsupported system"
;;
esac
}
test_iozone() {
echo "*** iozone ***"
case `uname` in
FreeBSD)
check newfs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check cd $MNTDIR
check iozone -a
check cd -
check umount $MNTDIR
check fsck -t ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check cd /$ZFSPOOL
check iozone -a
check cd -
check zpool destroy -f $ZFSPOOL
;;
Linux)
yes | check mkfs $LUN0
check mount $LUN0 $MNTDIR
check cd $MNTDIR
check iozone -a
check cd -
check umount $MNTDIR
check fsck -f $LUN0
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
check mount $LUN0 $MNTDIR
check cd $MNTDIR
check iozone -a
check cd -
check umount $MNTDIR
;;
SunOS)
yes | check newfs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check cd $MNTDIR
check iozone -a
check cd -
check umount $MNTDIR
check fsck -yF ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1
check cd /$ZFSPOOL
check iozone -a
check cd -
check zpool destroy -f $ZFSPOOL
;;
*)
die "unsupported system"
;;
esac
}
test_postmark() {
echo "*** postmark ***"
case `uname` in
FreeBSD)
check newfs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check cd $MNTDIR
printf "set number 10000\nrun\n" | check postmark
check cd -
check umount $MNTDIR
check fsck -t ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check cd /$ZFSPOOL
printf "set number 10000\nrun\n" | check postmark
check cd -
check zpool destroy -f $ZFSPOOL
;;
Linux)
yes | check mkfs $LUN0
check mount $LUN0 $MNTDIR
check cd $MNTDIR
printf "set number 10000\nrun\n" | check postmark
check cd -
check umount $MNTDIR
check fsck -f $LUN0
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
check mount $LUN0 $MNTDIR
check cd $MNTDIR
printf "set number 10000\nrun\n" | check postmark
check cd -
check umount $MNTDIR
;;
SunOS)
yes | check newfs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check cd $MNTDIR
printf "set number 10000\nrun\n" | check postmark
check cd -
check umount $MNTDIR
check fsck -yF ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1
check cd /$ZFSPOOL
printf "set number 10000\nrun\n" | check postmark
check cd -
check zpool destroy -f $ZFSPOOL
;;
*)
die "unsupported system"
;;
esac
}
test_postgresql_freebsd() {
check newfs $LUN0
check mount -t ufs $LUN0 $MNTDIR
check chown pgsql $MNTDIR
check chmod 755 $MNTDIR
check cd /
# XXX: How to make 'check' work here?
su -m pgsql -c "initdb -D $MNTDIR/db"
su -m pgsql -c "pg_ctl -D $MNTDIR/db -l /tmp/log start"
check sleep 10
su -m pgsql -c "pgbench -i postgres"
su -m pgsql -c "pgbench -t 10000 postgres"
su -m pgsql -c "pg_ctl -D $MNTDIR/db stop"
check cd -
check umount $MNTDIR
check fsck -t ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check chown pgsql /$ZFSPOOL
check chmod 755 /$ZFSPOOL
check cd /
# XXX: How to make 'check' work here?
su -m pgsql -c "initdb -D /$ZFSPOOL/db"
su -m pgsql -c "pg_ctl -D /$ZFSPOOL/db -l /tmp/log start"
check sleep 10
su -m pgsql -c "pgbench -i postgres"
su -m pgsql -c "pgbench -t 10000 postgres"
su -m pgsql -c "pg_ctl -D /$ZFSPOOL/db stop"
check cd -
check zpool destroy -f $ZFSPOOL
}
test_postgresql_linux() {
yes | check mkfs $LUN0
check mount $LUN0 $MNTDIR
check chown postgres $MNTDIR
check chmod 755 $MNTDIR
check cd /
# XXX: How to make 'check' work here?
su -m postgres -c "initdb -D $MNTDIR/db"
su -m postgres -c "pg_ctl -D $MNTDIR/db -l /tmp/log start"
check sleep 5
su -m postgres -c "pgbench -i"
su -m postgres -c "pgbench -t 10000"
su -m postgres -c "pg_ctl -D $MNTDIR/db stop"
check cd -
check umount $MNTDIR
check fsck -f $LUN0
check mkfs.btrfs $LUN0 $LUN1 $LUN2 $LUN3
check mount $LUN0 $MNTDIR
check chown postgres $MNTDIR
check chmod 755 $MNTDIR
check cd /
su -m postgres -c "initdb -D $MNTDIR/db"
su -m postgres -c "pg_ctl -D $MNTDIR/db -l /tmp/log start"
check sleep 5
su -m postgres -c "pgbench -i"
su -m postgres -c "pgbench -t 10000"
su -m postgres -c "pg_ctl -D $MNTDIR/db stop"
check cd -
check umount $MNTDIR
}
test_postgresql_solaris() {
PATH="$PATH:/usr/postgres/9.2-pgdg/bin" export PATH
yes | check newfs $LUN0
check mount -F ufs $LUN0 $MNTDIR
check chown postgres $MNTDIR
check chmod 755 $MNTDIR
check cd /
# XXX: How to make 'check' work here?
su postgres -c "initdb -D $MNTDIR/db"
su postgres -c "pg_ctl -D $MNTDIR/db -l /tmp/log start"
check sleep 10
su postgres -c "pgbench -i postgres"
su postgres -c "pgbench -t 10000 postgres"
su postgres -c "pg_ctl -D $MNTDIR/db stop"
check cd -
check umount $MNTDIR
check fsck -yF ufs $LUN0
check zpool create -f $ZFSPOOL $LUN0 $LUN1 $LUN2 $LUN3
check chown postgres /$ZFSPOOL
check chmod 755 /$ZFSPOOL
check cd /
# XXX: How to make 'check' work here?
su postgres -c "initdb -D /$ZFSPOOL/db"
su postgres -c "pg_ctl -D /$ZFSPOOL/db -l /tmp/log start"
check sleep 10
su postgres -c "pgbench -i postgres"
su postgres -c "pgbench -t 10000 postgres"
su postgres -c "pg_ctl -D /$ZFSPOOL/db stop"
check cd -
check zpool destroy -f $ZFSPOOL
}
test_postgresql() {
echo "*** postgresql ***"
case `uname` in
FreeBSD)
test_postgresql_freebsd
;;
Linux)
test_postgresql_linux
;;
SunOS)
test_postgresql_solaris
;;
*)
die "unsupported system"
;;
esac
}
test_detach() {
echo "*** detach ***"
case `uname` in
FreeBSD)
case `uname -r` in
9*)
echo "*** detaching not supported on FreeBSD 9 ***"
echo "*** please reboot the initiator VM before trying to run this script again ***"
;;
*)
check iscsictl -Ra
;;
esac
;;
Linux)
check iscsiadm -m node --logout
;;
SunOS)
check iscsiadm remove static-config $TARGET1,$TARGETIP
;;
*)
die "unsupported system"
;;
esac
}
banner
test_discovery
test_attach
test_newfs
test_cp
test_bonnie
test_iozone
test_postmark
test_postgresql
test_detach
echo "*** done ***"