freebsd-dev/sys/dev/pci/ohci_pci.c
Julian Elischer 6384b0f1bb The OHCI interfaces I have access to map their control regs etc. into
memory address space rather than IO space.. reflect this when looking for the
interface revision register.

If this is not true for them all then we probably need some smarter code.
1998-12-14 21:14:11 +00:00

301 lines
9.0 KiB
C

/* $NetBSD: ohci_pci.c,v 1.5 1998/11/25 22:32:04 augustss Exp $ */
/* FreeBSD $Id: ohci_pci.c,v 1.5 1998/12/14 09:40:14 n_hibma Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* USB Open Host Controller driver.
*
* OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf
* USB spec: http://www.teleport.com/cgi-bin/mailmerge.cgi/~usb/cgiform.tpl
*/
#include <dev/usb/usb_port.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#if defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#endif
#include <sys/device.h>
#include <sys/proc.h>
#include <sys/queue.h>
#if defined(__NetBSD__)
#include <machine/bus.h>
#include <dev/pci/pcivar.h>
#elif defined(__FreeBSD__)
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#define PCI_CLASS_SERIALBUS 0x0c000000
#define PCI_SUBCLASS_COMMUNICATIONS_SERIAL 0x00000000
#define PCI_SUBCLASS_SERIALBUS_FIREWIRE 0x00000000
#define PCI_SUBCLASS_SERIALBUS_ACCESS 0x00010000
#define PCI_SUBCLASS_SERIALBUS_SSA 0x00020000
#define PCI_SUBCLASS_SERIALBUS_USB 0x00030000
#define PCI_SUBCLASS_SERIALBUS_FIBER 0x00040000
#endif
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/ohcireg.h>
#include <dev/usb/ohcivar.h>
#if defined(__NetBSD__)
int ohci_pci_match __P((struct device *, struct cfdata *, void *));
void ohci_pci_attach __P((struct device *, struct device *, void *));
struct cfattach ohci_pci_ca = {
sizeof(struct ohci_softc), ohci_pci_match, ohci_pci_attach
};
#elif defined(__FreeBSD__)
#define PCI_INTERFACE(d) (((d) >> 8) & 0xff)
#define PCI_SUBCLASS(d) ((d) & PCI_SUBCLASS_MASK)
#define PCI_CLASS(d) ((d) & PCI_CLASS_MASK)
#define PCI_VENDOR(d) ((d) & 0xffff)
#define PCI_DEVICE(d) (((d) >> 8) & 0xffff)
#define PCI_OHCI_BASE_REG 0x10
static const char *ohci_pci_probe __P((pcici_t, pcidi_t));
static void ohci_pci_attach __P((pcici_t, int));
u_long ohci_count = 0; /* global counter for nr. of devices found */
static struct pci_device ohci_pci_device = {
"ohci",
ohci_pci_probe,
ohci_pci_attach,
&ohci_count,
NULL
};
DATA_SET(pcidevice_set, ohci_pci_device);
#endif
#if defined(__NetBSD__)
int
ohci_pci_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct pci_attach_args *pa = (struct pci_attach_args *) aux;
if (PCI_CLASS(pa->pa_class) == PCI_CLASS_SERIALBUS &&
PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_SERIALBUS_USB &&
PCI_INTERFACE(pa->pa_class) == PCI_INTERFACE_OHCI)
return 1;
return 0;
}
#elif defined(__FreeBSD__)
static const char *
ohci_pci_probe(pcici_t config_id, pcidi_t device_id)
{
u_int32_t class;
class = pci_conf_read(config_id, PCI_CLASS_REG);
if ( (PCI_CLASS(class) == PCI_CLASS_SERIALBUS)
&& (PCI_SUBCLASS(class) == PCI_SUBCLASS_SERIALBUS_USB)
&& (PCI_INTERFACE(class) == PCI_INTERFACE_OHCI))
return("OHCI Host Controller");
return NULL; /* dunno */
}
#endif
#if defined(__NetBSD__)
void
ohci_pci_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
struct ohci_softc *sc = (struct ohci_softc *)self;
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
pci_chipset_tag_t pc = pa->pa_pc;
char const *intrstr;
pci_intr_handle_t ih;
pcireg_t csr;
char devinfo[256];
usbd_status r;
char *vendor;
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class));
/* Map I/O registers */
if (pci_mapreg_map(pa, PCI_CBMEM, PCI_MAPREG_TYPE_MEM, 0,
&sc->iot, &sc->ioh, NULL, NULL)) {
printf("%s: can't map mem space\n", sc->sc_bus.bdev.dv_xname);
return;
}
sc->sc_dmatag = pa->pa_dmat;
/* Enable the device. */
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MASTER_ENABLE);
/* Map and establish the interrupt. */
if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin,
pa->pa_intrline, &ih)) {
printf("%s: couldn't map interrupt\n", sc->sc_bus.bdev.dv_xname);
return;
}
intrstr = pci_intr_string(pc, ih);
sc->sc_ih = pci_intr_establish(pc, ih, IPL_USB, ohci_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt",
sc->sc_bus.bdev.dv_xname);
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", sc->sc_bus.bdev.dv_xname, intrstr);
/* Figure out vendor for root hub descriptor. */
vendor = pci_findvendor(pa->pa_id);
if (vendor)
strncpy(sc->sc_vendor, vendor, sizeof(sc->sc_vendor));
else
sprintf(sc->sc_vendor, "vendor 0x%04x", PCI_VENDOR(pa->pa_id));
r = ohci_init(sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", sc->sc_bus.bdev.dv_xname,
r);
return;
}
/* Attach usb device. */
config_found((void *)sc, &sc->sc_bus, usbctlprint);
}
#elif defined(__FreeBSD__)
static void
ohci_pci_attach(pcici_t config_id, int unit)
{
int id;
usbd_status r;
ohci_softc_t *sc = NULL;
int rev;
vm_offset_t pbase;
sc = malloc(sizeof(ohci_softc_t), M_DEVBUF, M_NOWAIT);
/* Do not free it below, intr might use the sc */
if ( sc == NULL ) {
printf("usb%d: could not allocate memory", unit);
return;
}
memset(sc, 0, sizeof(ohci_softc_t));
if(!pci_map_mem(config_id, PCI_CBMEM,
(vm_offset_t *)&sc->sc_iobase, &pbase)) {
printf("usb%d: couldn't map memory\n", unit);
return;
}
sc->unit = unit;
if ( !pci_map_int(config_id, (pci_inthand_t *)ohci_intr,
(void *) sc, &bio_imask)) {
printf("usb%d: Unable to map irq\n", unit);
return;
}
#ifndef USBVERBOSE
if (bootverbose)
#endif
{
/* XXX is this correct? Does the correct version show up? */
rev = *((unsigned int *)(sc->sc_iobase+OHCI_REVISION));
printf("usb%d: OHCI version %d%d, interrupting at %d\n", unit,
OHCI_REV_HI(rev), OHCI_REV_LO(rev),
(int)pci_conf_read(config_id,PCI_INTERRUPT_REG) & 0xff);
}
/* Figure out vendor for root hub descriptor. */
id = pci_conf_read(config_id, PCI_ID_REG);
if (PCI_VENDOR(id) == 0x8086)
sprintf(sc->sc_vendor, "Intel");
else
sprintf(sc->sc_vendor, "Vendor 0x%04x", PCI_VENDOR(id));
/* We add a child to the root bus. After PCI configuration
* has completed the root bus will start to probe and
* attach all the devices attached to it, including our new
* kid.
*
* FIXME Sometime in the future the UHCI controller itself will
* become a kid of PCI device and this device add will no longer
* be necessary.
*
* See README for an elaborate description of the bus
* structure in spe.
*/
sc->sc_bus.bdev = device_add_child(root_bus, "usb", unit, sc);
if (!sc->sc_bus.bdev) {
DEVICE_ERROR(sc->sc_bus.bdev,
("unable to add USB device to root bus\n"));
return;
}
r = ohci_init(sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("usb%d: init failed, error=%d\n", unit, r);
device_delete_child(root_bus, sc->sc_bus.bdev);
return;
}
device_set_desc(sc->sc_bus.bdev, "OHCI Host Controller");
return;
}
#endif