freebsd-dev/sys/alpha/pci/t2_pci.c
John Baldwin 7e1f6dfe9d Modify the critical section API as follows:
- The MD functions critical_enter/exit are renamed to start with a cpu_
  prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
  count and a per-thread critical section saved state set when entering
  a critical section while at nesting level 0 and restored when exiting
  to nesting level 0.  This moves the saved state out of spin mutexes so
  that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
  cpu_critical_enter/exit.  MI code such as device drivers and spin
  mutexes use the MI wrappers.  Note that since the MI wrappers store
  the state in the current thread, they do not have any return values or
  arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
  assigned to curthread->td_savecrit during fork_exit().

Tested on:	i386, alpha
2001-12-18 00:27:18 +00:00

209 lines
5.7 KiB
C

/*-
* Copyright (c) 2000 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPELCAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <pci/pcivar.h>
#include <machine/swiz.h>
#include <machine/md_var.h>
#include <alpha/pci/t2reg.h>
#include <alpha/pci/t2var.h>
#include <alpha/pci/pcibus.h>
#include "alphapci_if.h"
#include "pcib_if.h"
#define KV(pa) ALPHA_PHYS_TO_K0SEG((pa) + sable_lynx_base)
static devclass_t pcib_devclass;
static int
t2_pcib_probe(device_t dev)
{
device_t child;
device_set_desc(dev, "T2 PCI host bus adapter");
pci_init_resources();
child = device_add_child(dev, "pci", 0);
device_set_ivars(child, 0);
return 0;
}
static int
t2_pcib_read_ivar(device_t dev, device_t child, int which, u_long *result)
{
if (which == PCIB_IVAR_BUS) {
*result = 0;
return 0;
}
return ENOENT;
}
static void *
t2_pcib_cvt_dense(device_t dev, vm_offset_t addr)
{
addr &= 0xffffffffUL;
return (void *) KV(addr | T2_PCI_DENSE);
}
static int
t2_pcib_maxslots(device_t dev)
{
return 9;
}
#define T2_CFGOFF(b, s, f, r) \
((b) ? (((b) << 16) | ((s) << 11) | ((f) << 8) | (r)) \
: ((1 << ((s) + 11)) | ((f) << 8) | (r)))
#define T2_TYPE1_SETUP(b,s,old_hae3) if((b)) { \
do { \
(s) = cpu_critical_enter(); \
(old_hae3) = REGVAL(T2_HAE0_3); \
alpha_mb(); \
REGVAL(T2_HAE0_3) = (old_hae3) | (1<<30); \
alpha_mb(); \
} while(0); \
}
#define T2_TYPE1_TEARDOWN(b,s,old_hae3) if((b)) { \
do { \
alpha_mb(); \
REGVAL(T2_HAE0_3) = (old_hae3); \
alpha_mb(); \
cpu_critical_exit((s)); \
} while(0); \
}
#define SWIZ_CFGREAD(b, s, f, r, width, type) do { \
type val = ~0; \
int ipl = 0; \
u_int32_t old_hae3 = 0; \
vm_offset_t off = T2_CFGOFF(b, s, f, r); \
vm_offset_t kv = SPARSE_##width##_ADDRESS(KV(T2_PCI_CONF), off); \
alpha_mb(); \
T2_TYPE1_SETUP(b,ipl,old_hae3); \
if (!badaddr((caddr_t)kv, sizeof(type))) { \
val = SPARSE_##width##_EXTRACT(off, SPARSE_READ(kv)); \
} \
T2_TYPE1_TEARDOWN(b,ipl,old_hae3); \
return val; \
} while (0)
#define SWIZ_CFGWRITE(b, s, f, r, data, width, type) do { \
int ipl = 0; \
u_int32_t old_hae3 = 0; \
vm_offset_t off = T2_CFGOFF(b, s, f, r); \
vm_offset_t kv = SPARSE_##width##_ADDRESS(KV(T2_PCI_CONF), off); \
alpha_mb(); \
T2_TYPE1_SETUP(b,ipl,old_hae3); \
if (!badaddr((caddr_t)kv, sizeof(type))) { \
SPARSE_WRITE(kv, SPARSE_##width##_INSERT(off, data)); \
alpha_wmb(); \
} \
T2_TYPE1_TEARDOWN(b,ipl,old_hae3); \
return; \
} while (0)
static u_int32_t
t2_pcib_read_config(device_t dev, u_int b, u_int s, u_int f,
u_int reg, int width)
{
switch (width) {
case 1:
SWIZ_CFGREAD(b, s, f, reg, BYTE, u_int8_t);
break;
case 2:
SWIZ_CFGREAD(b, s, f, reg, WORD, u_int16_t);
break;
case 4:
SWIZ_CFGREAD(b, s, f, reg, LONG, u_int32_t);
}
return ~0;
}
static void
t2_pcib_write_config(device_t dev, u_int b, u_int s, u_int f,
u_int reg, u_int32_t val, int width)
{
switch (width) {
case 1:
SWIZ_CFGWRITE(b, s, f, reg, val, BYTE, u_int8_t);
break;
case 2:
SWIZ_CFGWRITE(b, s, f, reg, val, WORD, u_int16_t);
break;
case 4:
SWIZ_CFGWRITE(b, s, f, reg, val, LONG, u_int32_t);
}
}
static device_method_t t2_pcib_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, t2_pcib_probe),
DEVMETHOD(device_attach, bus_generic_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, t2_pcib_read_ivar),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, pci_release_resource),
DEVMETHOD(bus_activate_resource, pci_activate_resource),
DEVMETHOD(bus_deactivate_resource, pci_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* alphapci interface */
DEVMETHOD(alphapci_cvt_dense, t2_pcib_cvt_dense),
/* pcib interface */
DEVMETHOD(pcib_maxslots, t2_pcib_maxslots),
DEVMETHOD(pcib_read_config, t2_pcib_read_config),
DEVMETHOD(pcib_write_config, t2_pcib_write_config),
DEVMETHOD(pcib_route_interrupt, alpha_pci_route_interrupt),
{ 0, 0 }
};
static driver_t t2_pcib_driver = {
"pcib",
t2_pcib_methods,
1,
};
DRIVER_MODULE(pcib, t2, t2_pcib_driver, pcib_devclass, 0, 0);