freebsd-dev/sys/dev/fdc/fdc_cbus.c
John Baldwin fed2c48af4 Adjust the fdc worker thread startup to work when APs are started earlier.
- Enable the commented out locking in fd_probe().  The worker thread
  should not be running yet (even after these changes), but better to be
  safe than sorry.
- Defer starting the worker thread until after the child drives have been
  probed.  The worker thread startup is moved into a fdc_start_worker()
  thread that the various front ends call at the end of attach.  As a
  side effect this fixes a few edge cases that weren't shutting down the
  worker thread if attach encountered a late failure.
- When executing the initial reset requested by attach in the worker
  thread, use DELAY() instead of a tsleep() if cold is set.

Tested by:	Howard Su <howard0su@gmail.com>
Sponsored by:	Netflix
2016-04-21 18:37:36 +00:00

185 lines
5.0 KiB
C

/*-
* Copyright (c) 2004 TAKAHASHI Yoshihiro
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/rman.h>
#include <sys/systm.h>
#include <machine/bus.h>
#include <pc98/cbus/cbus.h>
#include <dev/fdc/fdcvar.h>
#include <isa/isavar.h>
static bus_addr_t fdc_iat[] = {0, 2, 4};
static int
fdc_cbus_alloc_resources(device_t dev, struct fdc_data *fdc)
{
struct resource *res;
int i, rid;
fdc->fdc_dev = dev;
rid = 0;
res = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, fdc_iat, 3,
RF_ACTIVE);
if (res == NULL) {
device_printf(dev, "cannot reserve I/O port range\n");
return (ENXIO);
}
isa_load_resourcev(res, fdc_iat, 3);
for (i = 0; i < 3; i++) {
fdc->resio[i] = res;
fdc->ridio[i] = rid;
fdc->ioff[i] = i;
fdc->ioh[i] = rman_get_bushandle(res);
}
fdc->iot = rman_get_bustag(res);
rid = 3;
bus_set_resource(dev, SYS_RES_IOPORT, rid, IO_FDPORT, 1);
res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
if (res == NULL) {
device_printf(dev, "cannot reserve I/O port range\n");
return (ENXIO);
}
fdc->resio[3] = res;
fdc->ridio[3] = rid;
fdc->ioff[3] = 0;
fdc->ioh[3] = rman_get_bushandle(res);
/* XXX: Reuses fdc->iot */
rid = 4;
bus_set_resource(dev, SYS_RES_IOPORT, rid, 0x4be, 1);
res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
if (res == NULL) {
device_printf(dev, "cannot reserve I/O port range\n");
return (ENXIO);
}
fdc->resio[4] = res;
fdc->ridio[4] = rid;
fdc->ioff[4] = 0;
fdc->ioh[4] = rman_get_bushandle(res);
/* XXX: Reuses fdc->iot */
fdc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &fdc->rid_irq,
RF_ACTIVE);
if (fdc->res_irq == NULL) {
device_printf(dev, "cannot reserve interrupt line\n");
return (ENXIO);
}
if ((fdc->flags & FDC_NODMA) == 0) {
fdc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ,
&fdc->rid_drq, RF_ACTIVE);
if (fdc->res_drq == NULL) {
device_printf(dev, "cannot reserve DMA request line\n");
return (ENXIO);
}
fdc->dmachan = rman_get_start(fdc->res_drq);
}
return (0);
}
static int
fdc_cbus_probe(device_t dev)
{
int error;
struct fdc_data *fdc;
fdc = device_get_softc(dev);
/* Check pnp ids */
if (isa_get_vendorid(dev))
return (ENXIO);
/* Attempt to allocate our resources for the duration of the probe */
error = fdc_cbus_alloc_resources(dev, fdc);
if (error == 0)
error = fdc_initial_reset(dev, fdc);
fdc_release_resources(fdc);
return (error);
}
static int
fdc_cbus_attach(device_t dev)
{
struct fdc_data *fdc;
int error;
fdc = device_get_softc(dev);
error = fdc_cbus_alloc_resources(dev, fdc);
if (error == 0)
error = fdc_attach(dev);
if (error == 0)
error = fdc_hints_probe(dev);
if (error == 0)
fdc_start_worker(dev);
else
fdc_release_resources(fdc);
return (error);
}
static device_method_t fdc_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, fdc_cbus_probe),
DEVMETHOD(device_attach, fdc_cbus_attach),
DEVMETHOD(device_detach, fdc_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, fdc_print_child),
DEVMETHOD(bus_read_ivar, fdc_read_ivar),
DEVMETHOD(bus_write_ivar, fdc_write_ivar),
/* Our children never use any other bus interface methods. */
{ 0, 0 }
};
static driver_t fdc_driver = {
"fdc",
fdc_methods,
sizeof(struct fdc_data)
};
DRIVER_MODULE(fdc, isa, fdc_driver, fdc_devclass, 0, 0);