freebsd-dev/sys/dev/asr/asr.c
Poul-Henning Kamp fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00

4373 lines
172 KiB
C

/* $FreeBSD$ */
/*
* Copyright (c) 1996-2000 Distributed Processing Technology Corporation
* Copyright (c) 2000 Adaptec Corporation
* All rights reserved.
*
* TERMS AND CONDITIONS OF USE
*
* Redistribution and use in source form, with or without modification, are
* permitted provided that redistributions of source code must retain the
* above copyright notice, this list of conditions and the following disclaimer.
*
* This software is provided `as is' by Adaptec and any express or implied
* warranties, including, but not limited to, the implied warranties of
* merchantability and fitness for a particular purpose, are disclaimed. In no
* event shall Adaptec be liable for any direct, indirect, incidental, special,
* exemplary or consequential damages (including, but not limited to,
* procurement of substitute goods or services; loss of use, data, or profits;
* or business interruptions) however caused and on any theory of liability,
* whether in contract, strict liability, or tort (including negligence or
* otherwise) arising in any way out of the use of this driver software, even
* if advised of the possibility of such damage.
*
* SCSI I2O host adapter driver
*
* V1.03 2000/07/12 Mark_Salyzyn@adaptec.com
* - The controller is not actually an ASR (Adaptec SCSI RAID)
* series that is visible, it's more of an internal code name.
* remove any visible references within reason for now.
* - bus_ptr->LUN was not correctly zeroed when initially
* allocated causing a possible panic of the operating system
* during boot.
* V1.02 2000/06/26 Mark_Salyzyn@adaptec.com
* - Code always fails for ASR_getTid affecting performance.
* - initiated a set of changes that resulted from a formal
* code inspection by Mark_Salyzyn@adaptec.com,
* George_Dake@adaptec.com, Jeff_Zeak@adaptec.com,
* Martin_Wilson@adaptec.com and Vincent_Trandoan@adaptec.com.
* Their findings were focussed on the LCT & TID handler, and
* all resulting changes were to improve code readability,
* consistency or have a positive effect on performance.
* V1.01 2000/06/14 Mark_Salyzyn@adaptec.com
* - Passthrough returned an incorrect error.
* - Passthrough did not migrate the intrinsic scsi layer wakeup
* on command completion.
* - generate control device nodes using make_dev and delete_dev.
* - Performance affected by TID caching reallocing.
* - Made suggested changes by Justin_Gibbs@adaptec.com
* - use splcam instead of splbio.
* - use cam_imask instead of bio_imask.
* - use u_int8_t instead of u_char.
* - use u_int16_t instead of u_short.
* - use u_int32_t instead of u_long where appropriate.
* - use 64 bit context handler instead of 32 bit.
* - create_ccb should only allocate the worst case
* requirements for the driver since CAM may evolve
* making union ccb much larger than needed here.
* renamed create_ccb to asr_alloc_ccb.
* - go nutz justifying all debug prints as macros
* defined at the top and remove unsightly ifdefs.
* - INLINE STATIC viewed as confusing. Historically
* utilized to affect code performance and debug
* issues in OS, Compiler or OEM specific situations.
* V1.00 2000/05/31 Mark_Salyzyn@adaptec.com
* - Ported from FreeBSD 2.2.X DPT I2O driver.
* changed struct scsi_xfer to union ccb/struct ccb_hdr
* changed variable name xs to ccb
* changed struct scsi_link to struct cam_path
* changed struct scsibus_data to struct cam_sim
* stopped using fordriver for holding on to the TID
* use proprietary packet creation instead of scsi_inquire
* CAM layer sends synchronize commands.
*/
#define ASR_VERSION 1
#define ASR_REVISION '0'
#define ASR_SUBREVISION '3'
#define ASR_MONTH 7
#define ASR_DAY 12
#define ASR_YEAR 2000 - 1980
/*
* Debug macros to resude the unsightly ifdefs
*/
#if (defined(DEBUG_ASR) || defined(DEBUG_ASR_USR_CMD) || defined(DEBUG_ASR_CMD))
# define debug_asr_message(message) \
{ \
u_int32_t * pointer = (u_int32_t *)message; \
u_int32_t length = I2O_MESSAGE_FRAME_getMessageSize(message);\
u_int32_t counter = 0; \
\
while (length--) { \
printf ("%08lx%c", (u_long)*(pointer++), \
(((++counter & 7) == 0) || (length == 0)) \
? '\n' \
: ' '); \
} \
}
#endif /* DEBUG_ASR || DEBUG_ASR_USR_CMD || DEBUG_ASR_CMD */
#if (defined(DEBUG_ASR))
/* Breaks on none STDC based compilers :-( */
# define debug_asr_printf(fmt,args...) printf(fmt, ##args)
# define debug_asr_dump_message(message) debug_asr_message(message)
# define debug_asr_print_path(ccb) xpt_print_path(ccb->ccb_h.path);
/* None fatal version of the ASSERT macro */
# if (defined(__STDC__))
# define ASSERT(phrase) if(!(phrase))printf(#phrase " at line %d file %s\n",__LINE__,__FILE__)
# else
# define ASSERT(phrase) if(!(phrase))printf("phrase" " at line %d file %s\n",__LINE__,__FILE__)
# endif
#else /* DEBUG_ASR */
# define debug_asr_printf(fmt,args...)
# define debug_asr_dump_message(message)
# define debug_asr_print_path(ccb)
# define ASSERT(x)
#endif /* DEBUG_ASR */
/*
* If DEBUG_ASR_CMD is defined:
* 0 - Display incoming SCSI commands
* 1 - add in a quick character before queueing.
* 2 - add in outgoing message frames.
*/
#if (defined(DEBUG_ASR_CMD))
# define debug_asr_cmd_printf(fmt,args...) printf(fmt,##args)
# define debug_asr_dump_ccb(ccb) \
{ \
u_int8_t * cp = (unsigned char *)&(ccb->csio.cdb_io); \
int len = ccb->csio.cdb_len; \
\
while (len) { \
debug_asr_cmd_printf (" %02x", *(cp++)); \
--len; \
} \
}
# if (DEBUG_ASR_CMD > 0)
# define debug_asr_cmd1_printf debug_asr_cmd_printf
# else
# define debug_asr_cmd1_printf(fmt,args...)
# endif
# if (DEBUG_ASR_CMD > 1)
# define debug_asr_cmd2_printf debug_asr_cmd_printf
# define debug_asr_cmd2_dump_message(message) debug_asr_message(message)
# else
# define debug_asr_cmd2_printf(fmt,args...)
# define debug_asr_cmd2_dump_message(message)
# endif
#else /* DEBUG_ASR_CMD */
# define debug_asr_cmd_printf(fmt,args...)
# define debug_asr_cmd_dump_ccb(ccb)
# define debug_asr_cmd1_printf(fmt,args...)
# define debug_asr_cmd2_printf(fmt,args...)
# define debug_asr_cmd2_dump_message(message)
#endif /* DEBUG_ASR_CMD */
#if (defined(DEBUG_ASR_USR_CMD))
# define debug_usr_cmd_printf(fmt,args...) printf(fmt,##args)
# define debug_usr_cmd_dump_message(message) debug_usr_message(message)
#else /* DEBUG_ASR_USR_CMD */
# define debug_usr_cmd_printf(fmt,args...)
# define debug_usr_cmd_dump_message(message)
#endif /* DEBUG_ASR_USR_CMD */
#define dsDescription_size 46 /* Snug as a bug in a rug */
#include "dev/asr/dptsig.h"
static dpt_sig_S ASR_sig = {
{ 'd', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION, PROC_INTEL,
PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM, FT_HBADRVR, 0,
OEM_DPT, OS_FREE_BSD, CAP_ABOVE16MB, DEV_ALL,
ADF_ALL_SC5,
0, 0, ASR_VERSION, ASR_REVISION, ASR_SUBREVISION,
ASR_MONTH, ASR_DAY, ASR_YEAR,
/* 01234567890123456789012345678901234567890123456789 < 50 chars */
"Adaptec FreeBSD 4.0.0 Unix SCSI I2O HBA Driver"
/* ^^^^^ asr_attach alters these to match OS */
};
#include <sys/param.h> /* TRUE=1 and FALSE=0 defined here */
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <sys/disklabel.h>
#include <sys/bus.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/stat.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_xpt_periph.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/cputypes.h>
#include <i386/include/vmparam.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#define STATIC static
#define INLINE
#if (defined(DEBUG_ASR) && (DEBUG_ASR > 0))
# undef STATIC
# define STATIC
# undef INLINE
# define INLINE
#endif
#define IN
#define OUT
#define INOUT
#define osdSwap4(x) ((u_long)ntohl((u_long)(x)))
#define KVTOPHYS(x) vtophys(x)
#include "dev/asr/dptalign.h"
#include "dev/asr/i2oexec.h"
#include "dev/asr/i2obscsi.h"
#include "dev/asr/i2odpt.h"
#include "dev/asr/i2oadptr.h"
#include "opt_asr.h"
#include "dev/asr/sys_info.h"
/* Configuration Definitions */
#define SG_SIZE 58 /* Scatter Gather list Size */
#define MAX_TARGET_ID 126 /* Maximum Target ID supported */
#define MAX_LUN 255 /* Maximum LUN Supported */
#define MAX_CHANNEL 7 /* Maximum Channel # Supported by driver */
#define MAX_INBOUND 2000 /* Max CCBs, Also Max Queue Size */
#define MAX_OUTBOUND 256 /* Maximum outbound frames/adapter */
#define MAX_INBOUND_SIZE 512 /* Maximum inbound frame size */
#define MAX_MAP 4194304L /* Maximum mapping size of IOP */
/**************************************************************************
** ASR Host Adapter structure - One Structure For Each Host Adapter That **
** Is Configured Into The System. The Structure Supplies Configuration **
** Information, Status Info, Queue Info And An Active CCB List Pointer. **
***************************************************************************/
/* I2O register set */
typedef struct {
U8 Address[0x30];
volatile U32 Status;
volatile U32 Mask;
# define Mask_InterruptsDisabled 0x08
U32 x[2];
volatile U32 ToFIFO; /* In Bound FIFO */
volatile U32 FromFIFO; /* Out Bound FIFO */
} i2oRegs_t;
/*
* A MIX of performance and space considerations for TID lookups
*/
typedef u_int16_t tid_t;
typedef struct {
u_int32_t size; /* up to MAX_LUN */
tid_t TID[1];
} lun2tid_t;
typedef struct {
u_int32_t size; /* up to MAX_TARGET */
lun2tid_t * LUN[1];
} target2lun_t;
/*
* To ensure that we only allocate and use the worst case ccb here, lets
* make our own local ccb union. If asr_alloc_ccb is utilized for another
* ccb type, ensure that you add the additional structures into our local
* ccb union. To ensure strict type checking, we will utilize the local
* ccb definition wherever possible.
*/
union asr_ccb {
struct ccb_hdr ccb_h; /* For convenience */
struct ccb_scsiio csio;
struct ccb_setasync csa;
};
typedef struct Asr_softc {
u_int16_t ha_irq;
void * ha_Base; /* base port for each board */
u_int8_t * volatile ha_blinkLED;
i2oRegs_t * ha_Virt; /* Base address of adapter */
I2O_IOP_ENTRY ha_SystemTable;
LIST_HEAD(,ccb_hdr) ha_ccb; /* ccbs in use */
struct cam_path * ha_path[MAX_CHANNEL+1];
struct cam_sim * ha_sim[MAX_CHANNEL+1];
#if __FreeBSD_version >= 400000
struct resource * ha_mem_res;
struct resource * ha_irq_res;
void * ha_intr;
#endif
u_int8_t ha_adapter_target[MAX_CHANNEL+1];
PI2O_LCT ha_LCT; /* Complete list of devices */
# define le_type IdentityTag[0]
# define I2O_BSA 0x20
# define I2O_FCA 0x40
# define I2O_SCSI 0x00
# define I2O_PORT 0x80
# define I2O_UNKNOWN 0x7F
# define le_bus IdentityTag[1]
# define le_target IdentityTag[2]
# define le_lun IdentityTag[3]
target2lun_t * ha_targets[MAX_CHANNEL+1];
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME ha_Msgs;
u_long ha_Msgs_Phys;
u_int16_t ha_Msgs_Count;
/* Configuration information */
/* The target id maximums we take */
u_int8_t ha_MaxBus; /* Maximum bus */
u_int8_t ha_MaxId; /* Maximum target ID */
u_int8_t ha_MaxLun; /* Maximum target LUN */
u_int8_t ha_SgSize; /* Max SG elements */
u_int8_t ha_pciBusNum;
u_int8_t ha_pciDeviceNum;
u_int16_t ha_QueueSize; /* Max outstanding commands */
/* Links into other parents and HBAs */
struct Asr_softc * ha_next; /* HBA list */
#ifdef ASR_MEASURE_PERFORMANCE
#define MAX_TIMEQ_SIZE 256 // assumes MAX 256 scsi commands sent
asr_perf_t ha_performance;
u_int32_t ha_submitted_ccbs_count;
// Queueing macros for a circular queue
#define TIMEQ_FREE_LIST_EMPTY(head, tail) (-1 == (head) && -1 == (tail))
#define TIMEQ_FREE_LIST_FULL(head, tail) ((((tail) + 1) % MAX_TIMEQ_SIZE) == (head))
#define ENQ_TIMEQ_FREE_LIST(item, Q, head, tail) \
if (!TIMEQ_FREE_LIST_FULL((head), (tail))) { \
if TIMEQ_FREE_LIST_EMPTY((head),(tail)) { \
(head) = (tail) = 0; \
} \
else (tail) = ((tail) + 1) % MAX_TIMEQ_SIZE; \
Q[(tail)] = (item); \
} \
else { \
debug_asr_printf("asr: Enqueueing when TimeQ Free List is full... This should not happen!\n"); \
}
#define DEQ_TIMEQ_FREE_LIST(item, Q, head, tail) \
if (!TIMEQ_FREE_LIST_EMPTY((head), (tail))) { \
item = Q[(head)]; \
if ((head) == (tail)) { (head) = (tail) = -1; } \
else (head) = ((head) + 1) % MAX_TIMEQ_SIZE; \
} \
else { \
(item) = -1; \
debug_asr_printf("asr: Dequeueing when TimeQ Free List is empty... This should not happen!\n"); \
}
// Circular queue of time stamps
struct timeval ha_timeQ[MAX_TIMEQ_SIZE];
u_int32_t ha_timeQFreeList[MAX_TIMEQ_SIZE];
int ha_timeQFreeHead;
int ha_timeQFreeTail;
#endif
} Asr_softc_t;
STATIC Asr_softc_t * Asr_softc;
/*
* Prototypes of the routines we have in this object.
*/
/* Externally callable routines */
#if __FreeBSD_version >= 400000
#define PROBE_ARGS IN device_t tag
#define PROBE_RET int
#define PROBE_SET() u_long id = (pci_get_device(tag)<<16)|pci_get_vendor(tag)
#define PROBE_RETURN(retval) if(retval){device_set_desc(tag,retval);return(0);}else{return(ENXIO);}
#define ATTACH_ARGS IN device_t tag
#define ATTACH_RET int
#define ATTACH_SET() int unit = device_get_unit(tag)
#define ATTACH_RETURN(retval) return(retval)
#else
#define PROBE_ARGS IN pcici_t tag, IN pcidi_t id
#define PROBE_RET const char *
#define PROBE_SET()
#define PROBE_RETURN(retval) return(retval)
#define ATTACH_ARGS IN pcici_t tag, IN int unit
#define ATTACH_RET void
#define ATTACH_SET()
#define ATTACH_RETURN(retval) return
#endif
/* I2O HDM interface */
STATIC PROBE_RET asr_probe __P((PROBE_ARGS));
STATIC ATTACH_RET asr_attach __P((ATTACH_ARGS));
/* DOMINO placeholder */
STATIC PROBE_RET domino_probe __P((PROBE_ARGS));
STATIC ATTACH_RET domino_attach __P((ATTACH_ARGS));
/* MODE0 adapter placeholder */
STATIC PROBE_RET mode0_probe __P((PROBE_ARGS));
STATIC ATTACH_RET mode0_attach __P((ATTACH_ARGS));
STATIC Asr_softc_t * ASR_get_sc __P((
IN dev_t dev));
STATIC int asr_ioctl __P((
IN dev_t dev,
IN u_long cmd,
INOUT caddr_t data,
int flag,
struct proc * proc));
STATIC int asr_open __P((
IN dev_t dev,
int32_t flags,
int32_t ifmt,
IN struct proc * proc));
STATIC int asr_close __P((
dev_t dev,
int flags,
int ifmt,
struct proc * proc));
STATIC int asr_intr __P((
IN Asr_softc_t * sc));
STATIC void asr_timeout __P((
INOUT void * arg));
STATIC int ASR_init __P((
IN Asr_softc_t * sc));
STATIC INLINE int ASR_acquireLct __P((
INOUT Asr_softc_t * sc));
STATIC INLINE int ASR_acquireHrt __P((
INOUT Asr_softc_t * sc));
STATIC void asr_action __P((
IN struct cam_sim * sim,
IN union ccb * ccb));
STATIC void asr_async __P((
void * callback_arg,
u_int32_t code,
struct cam_path * path,
void * arg));
STATIC void asr_poll __P((
IN struct cam_sim * sim));
/*
* Here is the auto-probe structure used to nest our tests appropriately
* during the startup phase of the operating system.
*/
#if __FreeBSD_version >= 400000
STATIC device_method_t asr_methods[] = {
DEVMETHOD(device_probe, asr_probe),
DEVMETHOD(device_attach, asr_attach),
{ 0, 0 }
};
STATIC driver_t asr_driver = {
"asr",
asr_methods,
sizeof(Asr_softc_t)
};
STATIC devclass_t asr_devclass;
DRIVER_MODULE(asr, pci, asr_driver, asr_devclass, 0, 0);
STATIC device_method_t domino_methods[] = {
DEVMETHOD(device_probe, domino_probe),
DEVMETHOD(device_attach, domino_attach),
{ 0, 0 }
};
STATIC driver_t domino_driver = {
"domino",
domino_methods,
0
};
STATIC devclass_t domino_devclass;
DRIVER_MODULE(domino, pci, domino_driver, domino_devclass, 0, 0);
STATIC device_method_t mode0_methods[] = {
DEVMETHOD(device_probe, mode0_probe),
DEVMETHOD(device_attach, mode0_attach),
{ 0, 0 }
};
STATIC driver_t mode0_driver = {
"mode0",
mode0_methods,
0
};
STATIC devclass_t mode0_devclass;
DRIVER_MODULE(mode0, pci, mode0_driver, mode0_devclass, 0, 0);
#else
STATIC u_long asr_pcicount = 0;
STATIC struct pci_device asr_pcidev = {
"asr",
asr_probe,
asr_attach,
&asr_pcicount,
NULL
};
DATA_SET (asr_pciset, asr_pcidev);
STATIC u_long domino_pcicount = 0;
STATIC struct pci_device domino_pcidev = {
"domino",
domino_probe,
domino_attach,
&domino_pcicount,
NULL
};
DATA_SET (domino_pciset, domino_pcidev);
STATIC u_long mode0_pcicount = 0;
STATIC struct pci_device mode0_pcidev = {
"mode0",
mode0_probe,
mode0_attach,
&mode0_pcicount,
NULL
};
DATA_SET (mode0_pciset, mode0_pcidev);
#endif
/*
* devsw for asr hba driver
*
* only ioctl is used. the sd driver provides all other access.
*/
#define CDEV_MAJOR 154 /* prefered default character major */
STATIC struct cdevsw asr_cdevsw = {
asr_open, /* open */
asr_close, /* close */
noread, /* read */
nowrite, /* write */
asr_ioctl, /* ioctl */
nopoll, /* poll */
nommap, /* mmap */
nostrategy, /* strategy */
"asr", /* name */
CDEV_MAJOR, /* maj */
nodump, /* dump */
nopsize, /* psize */
0, /* flags */
-1 /* bmaj */
};
#ifdef ASR_MEASURE_PERFORMANCE
STATIC u_int32_t asr_time_delta __P((IN struct timeval start,
IN struct timeval end));
#endif
/*
* Initialize the dynamic cdevsw hooks.
*/
STATIC void
asr_drvinit (
void * unused)
{
static int asr_devsw_installed = 0;
if (asr_devsw_installed) {
return;
}
asr_devsw_installed++;
/*
* Find a free spot (the report during driver load used by
* osd layer in engine to generate the controlling nodes).
*/
while ((asr_cdevsw.d_maj < NUMCDEVSW)
&& (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL)) {
++asr_cdevsw.d_maj;
}
if (asr_cdevsw.d_maj >= NUMCDEVSW) for (
asr_cdevsw.d_maj = 0;
(asr_cdevsw.d_maj < CDEV_MAJOR)
&& (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL);
++asr_cdevsw.d_maj);
/*
* Come to papa
*/
cdevsw_add(&asr_cdevsw);
/*
* delete any nodes that would attach to the primary adapter,
* let the adapter scans add them.
*/
destroy_dev(makedev(asr_cdevsw.d_maj,0));
} /* asr_drvinit */
/* Must initialize before CAM layer picks up our HBA driver */
SYSINIT(asrdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,asr_drvinit,NULL)
/* I2O support routines */
#define defAlignLong(STRUCT,NAME) char NAME[sizeof(STRUCT)]
#define getAlignLong(STRUCT,NAME) ((STRUCT *)(NAME))
/*
* Fill message with default.
*/
STATIC PI2O_MESSAGE_FRAME
ASR_fillMessage (
IN char * Message,
IN u_int16_t size)
{
OUT PI2O_MESSAGE_FRAME Message_Ptr;
Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message);
bzero ((void *)Message_Ptr, size);
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
(size + sizeof(U32) - 1) >> 2);
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
return (Message_Ptr);
} /* ASR_fillMessage */
#define EMPTY_QUEUE ((U32)-1L)
STATIC INLINE U32
ASR_getMessage(
IN i2oRegs_t * virt)
{
OUT U32 MessageOffset;
if ((MessageOffset = virt->ToFIFO) == EMPTY_QUEUE) {
MessageOffset = virt->ToFIFO;
}
return (MessageOffset);
} /* ASR_getMessage */
/* Issue a polled command */
STATIC U32
ASR_initiateCp (
INOUT i2oRegs_t * virt,
IN PI2O_MESSAGE_FRAME Message)
{
OUT U32 Mask = -1L;
U32 MessageOffset;
u_int Delay = 1500;
/*
* ASR_initiateCp is only used for synchronous commands and will
* be made more resiliant to adapter delays since commands like
* resetIOP can cause the adapter to be deaf for a little time.
*/
while (((MessageOffset = ASR_getMessage(virt)) == EMPTY_QUEUE)
&& (--Delay != 0)) {
DELAY (10000);
}
if (MessageOffset != EMPTY_QUEUE) {
bcopy (Message, virt->Address + MessageOffset,
I2O_MESSAGE_FRAME_getMessageSize(Message) << 2);
/*
* Disable the Interrupts
*/
virt->Mask = (Mask = virt->Mask) | Mask_InterruptsDisabled;
virt->ToFIFO = MessageOffset;
}
return (Mask);
} /* ASR_initiateCp */
/*
* Reset the adapter.
*/
STATIC U32
ASR_resetIOP (
INOUT i2oRegs_t * virt)
{
struct resetMessage {
I2O_EXEC_IOP_RESET_MESSAGE M;
U32 R;
};
defAlignLong(struct resetMessage,Message);
PI2O_EXEC_IOP_RESET_MESSAGE Message_Ptr;
OUT U32 * volatile Reply_Ptr;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_IOP_RESET_MESSAGE)ASR_fillMessage(Message,
sizeof(I2O_EXEC_IOP_RESET_MESSAGE));
I2O_EXEC_IOP_RESET_MESSAGE_setFunction(Message_Ptr, I2O_EXEC_IOP_RESET);
/*
* Reset the Reply Status
*/
*(Reply_Ptr = (U32 *)((char *)Message_Ptr
+ sizeof(I2O_EXEC_IOP_RESET_MESSAGE))) = 0;
I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordLowAddress(Message_Ptr,
KVTOPHYS((void *)Reply_Ptr));
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
/*
* Wait for a response (Poll), timeouts are dangerous if
* the card is truly responsive. We assume response in 2s.
*/
u_int8_t Delay = 200;
while ((*Reply_Ptr == 0) && (--Delay != 0)) {
DELAY (10000);
}
/*
* Re-enable the interrupts.
*/
virt->Mask = Old;
ASSERT (*Reply_Ptr);
return (*Reply_Ptr);
}
ASSERT (Old != (U32)-1L);
return (0);
} /* ASR_resetIOP */
/*
* Get the curent state of the adapter
*/
STATIC INLINE PI2O_EXEC_STATUS_GET_REPLY
ASR_getStatus (
INOUT i2oRegs_t * virt,
OUT PI2O_EXEC_STATUS_GET_REPLY buffer)
{
defAlignLong(I2O_EXEC_STATUS_GET_MESSAGE,Message);
PI2O_EXEC_STATUS_GET_MESSAGE Message_Ptr;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_STATUS_GET_MESSAGE)ASR_fillMessage(Message,
sizeof(I2O_EXEC_STATUS_GET_MESSAGE));
I2O_EXEC_STATUS_GET_MESSAGE_setFunction(Message_Ptr,
I2O_EXEC_STATUS_GET);
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressLow(Message_Ptr,
KVTOPHYS((void *)buffer));
/* This one is a Byte Count */
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferLength(Message_Ptr,
sizeof(I2O_EXEC_STATUS_GET_REPLY));
/*
* Reset the Reply Status
*/
bzero ((void *)buffer, sizeof(I2O_EXEC_STATUS_GET_REPLY));
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
/*
* Wait for a response (Poll), timeouts are dangerous if
* the card is truly responsive. We assume response in 50ms.
*/
u_int8_t Delay = 50;
while (*((U8 * volatile)&buffer->SyncByte) == 0) {
if (--Delay == 0) {
buffer = (PI2O_EXEC_STATUS_GET_REPLY)NULL;
break;
}
DELAY (1000);
}
/*
* Re-enable the interrupts.
*/
virt->Mask = Old;
return (buffer);
}
return ((PI2O_EXEC_STATUS_GET_REPLY)NULL);
} /* ASR_getStatus */
/*
* Check if the device is a SCSI I2O HBA, and add it to the list.
*/
/*
* Probe for ASR controller. If we find it, we will use it.
* virtual adapters.
*/
STATIC PROBE_RET
asr_probe(PROBE_ARGS)
{
PROBE_SET();
if (id == 0xA5011044) {
PROBE_RETURN ("Adaptec Caching SCSI RAID");
}
PROBE_RETURN (NULL);
} /* asr_probe */
/*
* Probe/Attach for DOMINO chipset.
*/
STATIC PROBE_RET
domino_probe(PROBE_ARGS)
{
PROBE_SET();
if (id == 0x10121044) {
PROBE_RETURN ("Adaptec Caching Memory Controller");
}
PROBE_RETURN (NULL);
} /* domino_probe */
STATIC ATTACH_RET
domino_attach (ATTACH_ARGS)
{
ATTACH_RETURN (0);
} /* domino_attach */
/*
* Probe/Attach for MODE0 adapters.
*/
STATIC PROBE_RET
mode0_probe(PROBE_ARGS)
{
PROBE_SET();
if (id == 0x908010B5) {
PROBE_RETURN ("Adaptec Mode0 3xxx");
}
#if 0 /* this would match any generic i960 -- mjs */
if (id == 0x19608086) {
PROBE_RETURN ("Adaptec Mode0 1xxx");
}
#endif
PROBE_RETURN (NULL);
} /* mode0_probe */
STATIC ATTACH_RET
mode0_attach (ATTACH_ARGS)
{
ATTACH_RETURN (0);
} /* mode0_attach */
STATIC INLINE union asr_ccb *
asr_alloc_ccb (
IN Asr_softc_t * sc)
{
OUT union asr_ccb * new_ccb;
if ((new_ccb = (union asr_ccb *)malloc(sizeof(*new_ccb),
M_DEVBUF, M_WAITOK | M_ZERO)) != (union asr_ccb *)NULL) {
new_ccb->ccb_h.pinfo.priority = 1;
new_ccb->ccb_h.pinfo.index = CAM_UNQUEUED_INDEX;
new_ccb->ccb_h.spriv_ptr0 = sc;
}
return (new_ccb);
} /* asr_alloc_ccb */
STATIC INLINE void
asr_free_ccb (
IN union asr_ccb * free_ccb)
{
free(free_ccb, M_DEVBUF);
} /* asr_free_ccb */
/*
* Print inquiry data `carefully'
*/
STATIC void
ASR_prstring (
u_int8_t * s,
int len)
{
while ((--len >= 0) && (*s) && (*s != ' ') && (*s != '-')) {
printf ("%c", *(s++));
}
} /* ASR_prstring */
/*
* Prototypes
*/
STATIC INLINE int ASR_queue __P((
IN Asr_softc_t * sc,
IN PI2O_MESSAGE_FRAME Message));
/*
* Send a message synchronously and without Interrupt to a ccb.
*/
STATIC int
ASR_queue_s (
INOUT union asr_ccb * ccb,
IN PI2O_MESSAGE_FRAME Message)
{
int s;
U32 Mask;
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
/* Prevent interrupt service */
s = splcam ();
sc->ha_Virt->Mask = (Mask = sc->ha_Virt->Mask)
| Mask_InterruptsDisabled;
if (ASR_queue (sc, Message) == EMPTY_QUEUE) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
}
/*
* Wait for this board to report a finished instruction.
*/
while (ccb->ccb_h.status == CAM_REQ_INPROG) {
(void)asr_intr (sc);
}
/* Re-enable Interrupts */
sc->ha_Virt->Mask = Mask;
splx(s);
return (ccb->ccb_h.status);
} /* ASR_queue_s */
/*
* Send a message synchronously to a Asr_softc_t
*/
STATIC int
ASR_queue_c (
IN Asr_softc_t * sc,
IN PI2O_MESSAGE_FRAME Message)
{
union asr_ccb * ccb;
OUT int status;
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
return (CAM_REQUEUE_REQ);
}
status = ASR_queue_s (ccb, Message);
asr_free_ccb(ccb);
return (status);
} /* ASR_queue_c */
/*
* Add the specified ccb to the active queue
*/
STATIC INLINE void
ASR_ccbAdd (
IN Asr_softc_t * sc,
INOUT union asr_ccb * ccb)
{
int s;
s = splcam();
LIST_INSERT_HEAD(&(sc->ha_ccb), &(ccb->ccb_h), sim_links.le);
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT) {
/*
* RAID systems can take considerable time to
* complete some commands given the large cache
* flashes switching from write back to write thru.
*/
ccb->ccb_h.timeout = 6 * 60 * 1000;
}
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
}
splx(s);
} /* ASR_ccbAdd */
/*
* Remove the specified ccb from the active queue.
*/
STATIC INLINE void
ASR_ccbRemove (
IN Asr_softc_t * sc,
INOUT union asr_ccb * ccb)
{
int s;
s = splcam();
untimeout(asr_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch);
LIST_REMOVE(&ccb->ccb_h, sim_links.le);
splx(s);
} /* ASR_ccbRemove */
/*
* Fail all the active commands, so they get re-issued by the operating
* system.
*/
STATIC INLINE void
ASR_failActiveCommands (
IN Asr_softc_t * sc)
{
struct ccb_hdr * ccb;
defAlignLong(I2O_EXEC_LCT_NOTIFY_MESSAGE,Message);
PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr;
int s;
/* Send a blind LCT command to wait for the enableSys to complete */
Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)ASR_fillMessage(Message,
sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_LCT_NOTIFY);
I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr,
I2O_CLASS_MATCH_ANYCLASS);
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
s = splcam();
LIST_FOREACH(ccb, &(sc->ha_ccb), sim_links.le) {
ASR_ccbRemove (sc, (union asr_ccb *)ccb);
ccb->status &= ~CAM_STATUS_MASK;
ccb->status |= CAM_REQUEUE_REQ;
((struct ccb_scsiio *)ccb)->resid
= ((struct ccb_scsiio *)ccb)->dxfer_len;
if (ccb->path) {
xpt_done ((union ccb *)ccb);
} else {
wakeup ((caddr_t)ccb);
}
}
splx(s);
} /* ASR_failActiveCommands */
/*
* The following command causes the HBA to reset the specific bus
*/
STATIC INLINE void
ASR_resetBus(
IN Asr_softc_t * sc,
IN int bus)
{
defAlignLong(I2O_HBA_BUS_RESET_MESSAGE,Message);
I2O_HBA_BUS_RESET_MESSAGE * Message_Ptr;
PI2O_LCT_ENTRY Device;
Message_Ptr = (I2O_HBA_BUS_RESET_MESSAGE *)ASR_fillMessage(Message,
sizeof(I2O_HBA_BUS_RESET_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&Message_Ptr->StdMessageFrame,
I2O_HBA_BUS_RESET);
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if (((Device->le_type & I2O_PORT) != 0)
&& (Device->le_bus == bus)) {
I2O_MESSAGE_FRAME_setTargetAddress(
&Message_Ptr->StdMessageFrame,
I2O_LCT_ENTRY_getLocalTID(Device));
/* Asynchronous command, with no expectations */
(void)ASR_queue(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
break;
}
}
} /* ASR_resetBus */
STATIC INLINE int
ASR_getBlinkLedCode (
IN Asr_softc_t * sc)
{
if ((sc != (Asr_softc_t *)NULL)
&& (sc->ha_blinkLED != (u_int8_t *)NULL)
&& (sc->ha_blinkLED[1] == 0xBC)) {
return (sc->ha_blinkLED[0]);
}
return (0);
} /* ASR_getBlinkCode */
/*
* Determine the address of an TID lookup. Must be done at high priority
* since the address can be changed by other threads of execution.
*
* Returns NULL pointer if not indexible (but will attempt to generate
* an index if `new_entry' flag is set to TRUE).
*
* All addressible entries are to be guaranteed zero if never initialized.
*/
STATIC INLINE tid_t *
ASR_getTidAddress(
INOUT Asr_softc_t * sc,
IN int bus,
IN int target,
IN int lun,
IN int new_entry)
{
target2lun_t * bus_ptr;
lun2tid_t * target_ptr;
unsigned new_size;
/*
* Validity checking of incoming parameters. More of a bound
* expansion limit than an issue with the code dealing with the
* values.
*
* sc must be valid before it gets here, so that check could be
* dropped if speed a critical issue.
*/
if ((sc == (Asr_softc_t *)NULL)
|| (bus > MAX_CHANNEL)
|| (target > sc->ha_MaxId)
|| (lun > sc->ha_MaxLun)) {
debug_asr_printf("(%lx,%d,%d,%d) target out of range\n",
(u_long)sc, bus, target, lun);
return ((tid_t *)NULL);
}
/*
* See if there is an associated bus list.
*
* for performance, allocate in size of BUS_CHUNK chunks.
* BUS_CHUNK must be a power of two. This is to reduce
* fragmentation effects on the allocations.
*/
# define BUS_CHUNK 8
new_size = ((target + BUS_CHUNK - 1) & ~(BUS_CHUNK - 1));
if ((bus_ptr = sc->ha_targets[bus]) == (target2lun_t *)NULL) {
/*
* Allocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((sc->ha_targets[bus] = bus_ptr = (target2lun_t *)malloc (
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
M_TEMP, M_WAITOK | M_ZERO))
== (target2lun_t *)NULL)) {
debug_asr_printf("failed to allocate bus list\n");
return ((tid_t *)NULL);
}
bus_ptr->size = new_size + 1;
} else if (bus_ptr->size <= new_size) {
target2lun_t * new_bus_ptr;
/*
* Reallocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((new_bus_ptr = (target2lun_t *)malloc (
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
M_TEMP, M_WAITOK | M_ZERO))
== (target2lun_t *)NULL)) {
debug_asr_printf("failed to reallocate bus list\n");
return ((tid_t *)NULL);
}
/*
* Copy the whole thing, safer, simpler coding
* and not really performance critical at this point.
*/
bcopy (bus_ptr, new_bus_ptr, sizeof(*bus_ptr)
+ (sizeof(bus_ptr->LUN) * (bus_ptr->size - 1)));
sc->ha_targets[bus] = new_bus_ptr;
free (bus_ptr, M_TEMP);
bus_ptr = new_bus_ptr;
bus_ptr->size = new_size + 1;
}
/*
* We now have the bus list, lets get to the target list.
* Since most systems have only *one* lun, we do not allocate
* in chunks as above, here we allow one, then in chunk sizes.
* TARGET_CHUNK must be a power of two. This is to reduce
* fragmentation effects on the allocations.
*/
# define TARGET_CHUNK 8
if ((new_size = lun) != 0) {
new_size = ((lun + TARGET_CHUNK - 1) & ~(TARGET_CHUNK - 1));
}
if ((target_ptr = bus_ptr->LUN[target]) == (lun2tid_t *)NULL) {
/*
* Allocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((bus_ptr->LUN[target] = target_ptr = (lun2tid_t *)malloc (
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
M_TEMP, M_WAITOK | M_ZERO))
== (lun2tid_t *)NULL)) {
debug_asr_printf("failed to allocate target list\n");
return ((tid_t *)NULL);
}
target_ptr->size = new_size + 1;
} else if (target_ptr->size <= new_size) {
lun2tid_t * new_target_ptr;
/*
* Reallocate a new structure?
* Since one element in structure, the +1
* needed for size has been abstracted.
*/
if ((new_entry == FALSE)
|| ((new_target_ptr = (lun2tid_t *)malloc (
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
M_TEMP, M_WAITOK | M_ZERO))
== (lun2tid_t *)NULL)) {
debug_asr_printf("failed to reallocate target list\n");
return ((tid_t *)NULL);
}
/*
* Copy the whole thing, safer, simpler coding
* and not really performance critical at this point.
*/
bcopy (target_ptr, new_target_ptr,
sizeof(*target_ptr)
+ (sizeof(target_ptr->TID) * (target_ptr->size - 1)));
bus_ptr->LUN[target] = new_target_ptr;
free (target_ptr, M_TEMP);
target_ptr = new_target_ptr;
target_ptr->size = new_size + 1;
}
/*
* Now, acquire the TID address from the LUN indexed list.
*/
return (&(target_ptr->TID[lun]));
} /* ASR_getTidAddress */
/*
* Get a pre-existing TID relationship.
*
* If the TID was never set, return (tid_t)-1.
*
* should use mutex rather than spl.
*/
STATIC INLINE tid_t
ASR_getTid (
IN Asr_softc_t * sc,
IN int bus,
IN int target,
IN int lun)
{
tid_t * tid_ptr;
int s;
OUT tid_t retval;
s = splcam();
if (((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, FALSE))
== (tid_t *)NULL)
/* (tid_t)0 or (tid_t)-1 indicate no TID */
|| (*tid_ptr == (tid_t)0)) {
splx(s);
return ((tid_t)-1);
}
retval = *tid_ptr;
splx(s);
return (retval);
} /* ASR_getTid */
/*
* Set a TID relationship.
*
* If the TID was not set, return (tid_t)-1.
*
* should use mutex rather than spl.
*/
STATIC INLINE tid_t
ASR_setTid (
INOUT Asr_softc_t * sc,
IN int bus,
IN int target,
IN int lun,
INOUT tid_t TID)
{
tid_t * tid_ptr;
int s;
if (TID != (tid_t)-1) {
if (TID == 0) {
return ((tid_t)-1);
}
s = splcam();
if ((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, TRUE))
== (tid_t *)NULL) {
splx(s);
return ((tid_t)-1);
}
*tid_ptr = TID;
splx(s);
}
return (TID);
} /* ASR_setTid */
/*-------------------------------------------------------------------------*/
/* Function ASR_rescan */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* */
/* This Function Will rescan the adapter and resynchronize any data */
/* */
/* Return : 0 For OK, Error Code Otherwise */
/*-------------------------------------------------------------------------*/
STATIC INLINE int
ASR_rescan(
IN Asr_softc_t * sc)
{
int bus;
OUT int error;
/*
* Re-acquire the LCT table and synchronize us to the adapter.
*/
if ((error = ASR_acquireLct(sc)) == 0) {
error = ASR_acquireHrt(sc);
}
if (error != 0) {
return error;
}
bus = sc->ha_MaxBus;
/* Reset all existing cached TID lookups */
do {
int target;
/*
* Scan for all targets on this bus to see if they
* got affected by the rescan.
*/
for (target = 0; target <= sc->ha_MaxId; ++target) {
int lun;
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
PI2O_LCT_ENTRY Device;
tid_t TID = (tid_t)-1;
/*
* See if the cached TID changed. Search for
* the device in our new LCT.
*/
for (Device = sc->ha_LCT->LCTEntry;
Device < (PI2O_LCT_ENTRY)(((U32 *)sc->ha_LCT)
+ I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if ((Device->le_type != I2O_UNKNOWN)
&& (Device->le_bus == bus)
&& (Device->le_target == target)
&& (Device->le_lun == lun)
&& (I2O_LCT_ENTRY_getUserTID(Device)
== 0xFFF)) {
TID = I2O_LCT_ENTRY_getLocalTID(
Device);
break;
}
}
/*
* Indicate to the OS that the label needs
* to be recalculated, or that the specific
* open device is no longer valid (Merde)
* because the cached TID changed.
* ASR_getTid (sc, bus, target, lun) != TI
*/
/*
* We have the option of clearing the
* cached TID for it to be rescanned, or to
* set it now even if the device never got
* accessed. We chose the later since we
* currently do not use the condition that
* the TID ever got cached.
*/
ASR_setTid (sc, bus, target, lun, TID);
}
}
} while (--bus >= 0);
return (error);
} /* ASR_rescan */
/*-------------------------------------------------------------------------*/
/* Function ASR_reset */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* */
/* This Function Will reset the adapter and resynchronize any data */
/* */
/* Return : None */
/*-------------------------------------------------------------------------*/
STATIC INLINE void
ASR_reset(
IN Asr_softc_t * sc)
{
(void)ASR_resetIOP (sc->ha_Virt);
(void)ASR_init (sc);
(void)ASR_rescan (sc);
(void)ASR_failActiveCommands (sc);
} /* ASR_reset */
/*
* Device timeout handler.
*/
STATIC void
asr_timeout(
INOUT void * arg)
{
union asr_ccb * ccb = (union asr_ccb *)arg;
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
int s;
debug_asr_print_path(ccb);
debug_asr_printf("timed out");
/*
* Check if the adapter has locked up?
*/
if ((s = ASR_getBlinkLedCode(sc)) != 0) {
debug_asr_printf (
" due to adapter blinkled code %x\nresetting adapter\n", s);
ASR_reset (sc);
return;
}
/*
* Abort does not function on the ASR card!!! Walking away from
* the SCSI command is also *very* dangerous. A SCSI BUS reset is
* our best bet, followed by a complete adapter reset if that fails.
*/
s = splcam();
if (ccb->ccb_h.status == CAM_CMD_TIMEOUT) {
debug_asr_printf (" AGAIN\nreinitializing adapter\n");
ASR_reset (sc);
splx(s);
return;
}
debug_asr_printf ("\nresetting bus\n");
/* If the BUS reset does not take, then an adapter reset is next! */
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
(ccb->ccb_h.timeout * hz) / 1000);
ASR_resetBus (sc, cam_sim_bus(xpt_path_sim(ccb->ccb_h.path)));
splx(s);
} /* asr_timeout */
/*
* send a message asynchronously
*/
STATIC INLINE int
ASR_queue(
IN Asr_softc_t * sc,
IN PI2O_MESSAGE_FRAME Message)
{
OUT U32 MessageOffset;
union asr_ccb * ccb;
debug_asr_printf ("Host Command Dump:\n");
debug_asr_dump_message (Message);
/*
* Limit the number of Messages sent to this HBA. Better to sleep,
* than to hardware loop like a nut! By limiting the number of
* messages to an individual HBA here, we manage to perform all
* the processing of the message ready to drop the next one into
* the controller. We could limit the messages we are allowed to
* take, but that may have a performance hit.
*/
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(Message);
if (((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE)
|| ((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE)) {
#ifdef ASR_MEASURE_PERFORMANCE
int startTimeIndex;
if (ccb) {
++sc->ha_performance.command_count[
(int) ccb->csio.cdb_io.cdb_bytes[0]];
DEQ_TIMEQ_FREE_LIST(startTimeIndex,
sc->ha_timeQFreeList,
sc->ha_timeQFreeHead,
sc->ha_timeQFreeTail);
if (-1 != startTimeIndex) {
microtime(&sc->ha_timeQ[startTimeIndex]);
}
/* Time stamp the command before we send it out */
((PRIVATE_SCSI_SCB_EXECUTE_MESSAGE *) Message)->
PrivateMessageFrame.TransactionContext
= (I2O_TRANSACTION_CONTEXT) startTimeIndex;
++sc->ha_submitted_ccbs_count;
if (sc->ha_performance.max_submit_count
< sc->ha_submitted_ccbs_count) {
sc->ha_performance.max_submit_count
= sc->ha_submitted_ccbs_count;
}
}
#endif
bcopy (Message, sc->ha_Virt->Address + MessageOffset,
I2O_MESSAGE_FRAME_getMessageSize(Message) << 2);
if (ccb) {
ASR_ccbAdd (sc, ccb);
}
/* Post the command */
sc->ha_Virt->ToFIFO = MessageOffset;
} else {
if (ASR_getBlinkLedCode(sc)) {
ASR_reset (sc);
}
}
return (MessageOffset);
} /* ASR_queue */
/* Simple Scatter Gather elements */
#define SG(SGL,Index,Flags,Buffer,Size) \
I2O_FLAGS_COUNT_setCount( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
Size); \
I2O_FLAGS_COUNT_setFlags( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | (Flags)); \
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress( \
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index]), \
(Buffer == NULL) ? NULL : KVTOPHYS(Buffer))
/*
* Retrieve Parameter Group.
* Buffer must be allocated using defAlignLong macro.
*/
STATIC void *
ASR_getParams(
IN Asr_softc_t * sc,
IN tid_t TID,
IN int Group,
OUT void * Buffer,
IN unsigned BufferSize)
{
struct paramGetMessage {
I2O_UTIL_PARAMS_GET_MESSAGE M;
char F[
sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)];
struct Operations {
I2O_PARAM_OPERATIONS_LIST_HEADER Header;
I2O_PARAM_OPERATION_ALL_TEMPLATE Template[1];
} O;
};
defAlignLong(struct paramGetMessage, Message);
struct Operations * Operations_Ptr;
I2O_UTIL_PARAMS_GET_MESSAGE * Message_Ptr;
struct ParamBuffer {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
char Info[1];
} * Buffer_Ptr;
Message_Ptr = (I2O_UTIL_PARAMS_GET_MESSAGE *)ASR_fillMessage(Message,
sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
Operations_Ptr = (struct Operations *)((char *)Message_Ptr
+ sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
bzero ((void *)Operations_Ptr, sizeof(struct Operations));
I2O_PARAM_OPERATIONS_LIST_HEADER_setOperationCount(
&(Operations_Ptr->Header), 1);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setOperation(
&(Operations_Ptr->Template[0]), I2O_PARAMS_OPERATION_FIELD_GET);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setFieldCount(
&(Operations_Ptr->Template[0]), 0xFFFF);
I2O_PARAM_OPERATION_ALL_TEMPLATE_setGroupNumber(
&(Operations_Ptr->Template[0]), Group);
bzero ((void *)(Buffer_Ptr = getAlignLong(struct ParamBuffer, Buffer)),
BufferSize);
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
I2O_VERSION_11
+ (((sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setTargetAddress (&(Message_Ptr->StdMessageFrame),
TID);
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
I2O_UTIL_PARAMS_GET);
/*
* Set up the buffers as scatter gather elements.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER,
Operations_Ptr, sizeof(struct Operations));
SG(&(Message_Ptr->SGL), 1,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
Buffer_Ptr, BufferSize);
if ((ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) == CAM_REQ_CMP)
&& (Buffer_Ptr->Header.ResultCount)) {
return ((void *)(Buffer_Ptr->Info));
}
return ((void *)NULL);
} /* ASR_getParams */
/*
* Acquire the LCT information.
*/
STATIC INLINE int
ASR_acquireLct (
INOUT Asr_softc_t * sc)
{
PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr;
PI2O_SGE_SIMPLE_ELEMENT sg;
int MessageSizeInBytes;
caddr_t v;
int len;
I2O_LCT Table;
PI2O_LCT_ENTRY Entry;
/*
* sc value assumed valid
*/
MessageSizeInBytes = sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE)
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT);
if ((Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)malloc (
MessageSizeInBytes, M_TEMP, M_WAITOK))
== (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) {
return (ENOMEM);
}
(void)ASR_fillMessage((char *)Message_Ptr, MessageSizeInBytes);
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11 +
(((sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_LCT_NOTIFY);
I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr,
I2O_CLASS_MATCH_ANYCLASS);
/*
* Call the LCT table to determine the number of device entries
* to reserve space for.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &Table,
sizeof(I2O_LCT));
/*
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
I2O_LCT_setTableSize(&Table,
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
/*
* Determine the size of the LCT table.
*/
if (sc->ha_LCT) {
free (sc->ha_LCT, M_TEMP);
}
/*
* malloc only generates contiguous memory when less than a
* page is expected. We must break the request up into an SG list ...
*/
if (((len = (I2O_LCT_getTableSize(&Table) << 2)) <=
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)))
|| (len > (128 * 1024))) { /* Arbitrary */
free (Message_Ptr, M_TEMP);
return (EINVAL);
}
if ((sc->ha_LCT = (PI2O_LCT)malloc (len, M_TEMP, M_WAITOK))
== (PI2O_LCT)NULL) {
free (Message_Ptr, M_TEMP);
return (ENOMEM);
}
/*
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
I2O_LCT_setTableSize(sc->ha_LCT,
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
/*
* Convert the access to the LCT table into a SG list.
*/
sg = Message_Ptr->SGL.u.Simple;
v = (caddr_t)(sc->ha_LCT);
for (;;) {
int next, base, span;
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
/* How far can we go contiguously */
while ((len > 0) && (base == next)) {
int size;
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
/* Construct the Flags */
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
{
int rw = I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT;
if (len <= 0) {
rw = (I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT
| I2O_SGL_FLAGS_LAST_ELEMENT
| I2O_SGL_FLAGS_END_OF_BUFFER);
}
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount), rw);
}
if (len <= 0) {
break;
}
/*
* Incrementing requires resizing of the packet.
*/
++sg;
MessageSizeInBytes += sizeof(*sg);
I2O_MESSAGE_FRAME_setMessageSize(
&(Message_Ptr->StdMessageFrame),
I2O_MESSAGE_FRAME_getMessageSize(
&(Message_Ptr->StdMessageFrame))
+ (sizeof(*sg) / sizeof(U32)));
{
PI2O_EXEC_LCT_NOTIFY_MESSAGE NewMessage_Ptr;
if ((NewMessage_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)
malloc (MessageSizeInBytes, M_TEMP, M_WAITOK))
== (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) {
free (sc->ha_LCT, M_TEMP);
sc->ha_LCT = (PI2O_LCT)NULL;
free (Message_Ptr, M_TEMP);
return (ENOMEM);
}
span = ((caddr_t)sg) - (caddr_t)Message_Ptr;
bcopy ((caddr_t)Message_Ptr,
(caddr_t)NewMessage_Ptr, span);
free (Message_Ptr, M_TEMP);
sg = (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)NewMessage_Ptr) + span);
Message_Ptr = NewMessage_Ptr;
}
}
{ int retval;
retval = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free (Message_Ptr, M_TEMP);
if (retval != CAM_REQ_CMP) {
return (ENODEV);
}
}
/* If the LCT table grew, lets truncate accesses */
if (I2O_LCT_getTableSize(&Table) < I2O_LCT_getTableSize(sc->ha_LCT)) {
I2O_LCT_setTableSize(sc->ha_LCT, I2O_LCT_getTableSize(&Table));
}
for (Entry = sc->ha_LCT->LCTEntry; Entry < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Entry) {
Entry->le_type = I2O_UNKNOWN;
switch (I2O_CLASS_ID_getClass(&(Entry->ClassID))) {
case I2O_CLASS_RANDOM_BLOCK_STORAGE:
Entry->le_type = I2O_BSA;
break;
case I2O_CLASS_SCSI_PERIPHERAL:
Entry->le_type = I2O_SCSI;
break;
case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL:
Entry->le_type = I2O_FCA;
break;
case I2O_CLASS_BUS_ADAPTER_PORT:
Entry->le_type = I2O_PORT | I2O_SCSI;
/* FALLTHRU */
case I2O_CLASS_FIBRE_CHANNEL_PORT:
if (I2O_CLASS_ID_getClass(&(Entry->ClassID)) ==
I2O_CLASS_FIBRE_CHANNEL_PORT) {
Entry->le_type = I2O_PORT | I2O_FCA;
}
{ struct ControllerInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
};
defAlignLong(struct ControllerInfo, Buffer);
PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
Entry->le_bus = 0xff;
Entry->le_target = 0xff;
Entry->le_lun = 0xff;
if ((Info = (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)
ASR_getParams(sc,
I2O_LCT_ENTRY_getLocalTID(Entry),
I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO,
Buffer, sizeof(struct ControllerInfo)))
== (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)NULL) {
continue;
}
Entry->le_target
= I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getInitiatorID(
Info);
Entry->le_lun = 0;
} /* FALLTHRU */
default:
continue;
}
{ struct DeviceInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_DPT_DEVICE_INFO_SCALAR Info;
};
defAlignLong (struct DeviceInfo, Buffer);
PI2O_DPT_DEVICE_INFO_SCALAR Info;
Entry->le_bus = 0xff;
Entry->le_target = 0xff;
Entry->le_lun = 0xff;
if ((Info = (PI2O_DPT_DEVICE_INFO_SCALAR)
ASR_getParams(sc,
I2O_LCT_ENTRY_getLocalTID(Entry),
I2O_DPT_DEVICE_INFO_GROUP_NO,
Buffer, sizeof(struct DeviceInfo)))
== (PI2O_DPT_DEVICE_INFO_SCALAR)NULL) {
continue;
}
Entry->le_type
|= I2O_DPT_DEVICE_INFO_SCALAR_getDeviceType(Info);
Entry->le_bus
= I2O_DPT_DEVICE_INFO_SCALAR_getBus(Info);
if ((Entry->le_bus > sc->ha_MaxBus)
&& (Entry->le_bus <= MAX_CHANNEL)) {
sc->ha_MaxBus = Entry->le_bus;
}
Entry->le_target
= I2O_DPT_DEVICE_INFO_SCALAR_getIdentifier(Info);
Entry->le_lun
= I2O_DPT_DEVICE_INFO_SCALAR_getLunInfo(Info);
}
}
/*
* A zero return value indicates success.
*/
return (0);
} /* ASR_acquireLct */
/*
* Initialize a message frame.
* We assume that the CDB has already been set up, so all we do here is
* generate the Scatter Gather list.
*/
STATIC INLINE PI2O_MESSAGE_FRAME
ASR_init_message(
IN union asr_ccb * ccb,
OUT PI2O_MESSAGE_FRAME Message)
{
int next, span, base, rw;
OUT PI2O_MESSAGE_FRAME Message_Ptr;
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
PI2O_SGE_SIMPLE_ELEMENT sg;
caddr_t v;
vm_size_t size, len;
U32 MessageSize;
/* We only need to zero out the PRIVATE_SCSI_SCB_EXECUTE_MESSAGE */
bzero (Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message),
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)));
{
int target = ccb->ccb_h.target_id;
int lun = ccb->ccb_h.target_lun;
int bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tid_t TID;
if ((TID = ASR_getTid (sc, bus, target, lun)) == (tid_t)-1) {
PI2O_LCT_ENTRY Device;
TID = (tid_t)0;
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if ((Device->le_type != I2O_UNKNOWN)
&& (Device->le_bus == bus)
&& (Device->le_target == target)
&& (Device->le_lun == lun)
&& (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF)) {
TID = I2O_LCT_ENTRY_getLocalTID(Device);
ASR_setTid (sc, Device->le_bus,
Device->le_target, Device->le_lun,
TID);
break;
}
}
}
if (TID == (tid_t)0) {
return ((PI2O_MESSAGE_FRAME)NULL);
}
I2O_MESSAGE_FRAME_setTargetAddress(Message_Ptr, TID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, TID);
}
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11 |
(((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT)) / sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
/*
* We do not need any (optional byteswapping) method access to
* the Initiator & Transaction context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID);
/*
* copy the cdb over
*/
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, ccb->csio.cdb_len);
bcopy (&(ccb->csio.cdb_io),
((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->CDB, ccb->csio.cdb_len);
/*
* Given a buffer describing a transfer, set up a scatter/gather map
* in a ccb to map that SCSI transfer.
*/
rw = (ccb->ccb_h.flags & CAM_DIR_IN) ? 0 : I2O_SGL_FLAGS_DIR;
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
(ccb->csio.dxfer_len)
? ((rw) ? (I2O_SCB_FLAG_XFER_TO_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)
: (I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER))
: (I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
/*
* Given a transfer described by a `data', fill in the SG list.
*/
sg = &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->SGL.u.Simple[0];
len = ccb->csio.dxfer_len;
v = ccb->csio.data_ptr;
ASSERT (ccb->csio.dxfer_len >= 0);
MessageSize = I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, len);
while ((len > 0) && (sg < &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
Message_Ptr)->SGL.u.Simple[SG_SIZE])) {
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
/* How far can we go contiguously */
while ((len > 0) && (base == next)) {
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
if (len == 0) {
rw |= I2O_SGL_FLAGS_LAST_ELEMENT;
}
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount),
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | rw);
++sg;
MessageSize += sizeof(*sg) / sizeof(U32);
}
/* We always do the request sense ... */
if ((span = ccb->csio.sense_len) == 0) {
span = sizeof(ccb->csio.sense_data);
}
SG(sg, 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
&(ccb->csio.sense_data), span);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
MessageSize + (sizeof(*sg) / sizeof(U32)));
return (Message_Ptr);
} /* ASR_init_message */
/*
* Reset the adapter.
*/
STATIC INLINE U32
ASR_initOutBound (
INOUT Asr_softc_t * sc)
{
struct initOutBoundMessage {
I2O_EXEC_OUTBOUND_INIT_MESSAGE M;
U32 R;
};
defAlignLong(struct initOutBoundMessage,Message);
PI2O_EXEC_OUTBOUND_INIT_MESSAGE Message_Ptr;
OUT U32 * volatile Reply_Ptr;
U32 Old;
/*
* Build up our copy of the Message.
*/
Message_Ptr = (PI2O_EXEC_OUTBOUND_INIT_MESSAGE)ASR_fillMessage(Message,
sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_OUTBOUND_INIT);
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setHostPageFrameSize(Message_Ptr, PAGE_SIZE);
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setOutboundMFrameSize(Message_Ptr,
sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME));
/*
* Reset the Reply Status
*/
*(Reply_Ptr = (U32 *)((char *)Message_Ptr
+ sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE))) = 0;
SG (&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT, Reply_Ptr,
sizeof(U32));
/*
* Send the Message out
*/
if ((Old = ASR_initiateCp (sc->ha_Virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
u_long size, addr;
/*
* Wait for a response (Poll).
*/
while (*Reply_Ptr < I2O_EXEC_OUTBOUND_INIT_REJECTED);
/*
* Re-enable the interrupts.
*/
sc->ha_Virt->Mask = Old;
/*
* Populate the outbound table.
*/
if (sc->ha_Msgs == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
/* Allocate the reply frames */
size = sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
* sc->ha_Msgs_Count;
/*
* contigmalloc only works reliably at
* initialization time.
*/
if ((sc->ha_Msgs = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
contigmalloc (size, M_DEVBUF, M_WAITOK, 0ul,
0xFFFFFFFFul, (u_long)sizeof(U32), 0ul))
!= (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
(void)bzero ((char *)sc->ha_Msgs, size);
sc->ha_Msgs_Phys = KVTOPHYS(sc->ha_Msgs);
}
}
/* Initialize the outbound FIFO */
if (sc->ha_Msgs != (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL)
for (size = sc->ha_Msgs_Count, addr = sc->ha_Msgs_Phys;
size; --size) {
sc->ha_Virt->FromFIFO = addr;
addr += sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME);
}
return (*Reply_Ptr);
}
return (0);
} /* ASR_initOutBound */
/*
* Set the system table
*/
STATIC INLINE int
ASR_setSysTab(
IN Asr_softc_t * sc)
{
PI2O_EXEC_SYS_TAB_SET_MESSAGE Message_Ptr;
PI2O_SET_SYSTAB_HEADER SystemTable;
Asr_softc_t * ha;
PI2O_SGE_SIMPLE_ELEMENT sg;
int retVal;
if ((SystemTable = (PI2O_SET_SYSTAB_HEADER)malloc (
sizeof(I2O_SET_SYSTAB_HEADER), M_TEMP, M_WAITOK | M_ZERO))
== (PI2O_SET_SYSTAB_HEADER)NULL) {
return (ENOMEM);
}
for (ha = Asr_softc; ha; ha = ha->ha_next) {
++SystemTable->NumberEntries;
}
if ((Message_Ptr = (PI2O_EXEC_SYS_TAB_SET_MESSAGE)malloc (
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)),
M_TEMP, M_WAITOK)) == (PI2O_EXEC_SYS_TAB_SET_MESSAGE)NULL) {
free (SystemTable, M_TEMP);
return (ENOMEM);
}
(void)ASR_fillMessage((char *)Message_Ptr,
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)));
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11 +
(((sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_SYS_TAB_SET);
/*
* Call the LCT table to determine the number of device entries
* to reserve space for.
* since this code is reused in several systems, code efficiency
* is greater by using a shift operation rather than a divide by
* sizeof(u_int32_t).
*/
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
&(Message_Ptr->StdMessageFrame)) & 0xF0) >> 2));
SG(sg, 0, I2O_SGL_FLAGS_DIR, SystemTable, sizeof(I2O_SET_SYSTAB_HEADER));
++sg;
for (ha = Asr_softc; ha; ha = ha->ha_next) {
SG(sg, 0,
((ha->ha_next)
? (I2O_SGL_FLAGS_DIR)
: (I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER)),
&(ha->ha_SystemTable), sizeof(ha->ha_SystemTable));
++sg;
}
SG(sg, 0, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
SG(sg, 1, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_LAST_ELEMENT
| I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
retVal = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free (Message_Ptr, M_TEMP);
free (SystemTable, M_TEMP);
return (retVal);
} /* ASR_setSysTab */
STATIC INLINE int
ASR_acquireHrt (
INOUT Asr_softc_t * sc)
{
defAlignLong(I2O_EXEC_HRT_GET_MESSAGE,Message);
I2O_EXEC_HRT_GET_MESSAGE * Message_Ptr;
struct {
I2O_HRT Header;
I2O_HRT_ENTRY Entry[MAX_CHANNEL];
} Hrt;
u_int8_t NumberOfEntries;
PI2O_HRT_ENTRY Entry;
bzero ((void *)&Hrt, sizeof (Hrt));
Message_Ptr = (I2O_EXEC_HRT_GET_MESSAGE *)ASR_fillMessage(Message,
sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
+ sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
(I2O_VERSION_11
+ (((sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4)));
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
I2O_EXEC_HRT_GET);
/*
* Set up the buffers as scatter gather elements.
*/
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
&Hrt, sizeof(Hrt));
if (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != CAM_REQ_CMP) {
return (ENODEV);
}
if ((NumberOfEntries = I2O_HRT_getNumberEntries(&Hrt.Header))
> (MAX_CHANNEL + 1)) {
NumberOfEntries = MAX_CHANNEL + 1;
}
for (Entry = Hrt.Header.HRTEntry;
NumberOfEntries != 0;
++Entry, --NumberOfEntries) {
PI2O_LCT_ENTRY Device;
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if (I2O_LCT_ENTRY_getLocalTID(Device)
== (I2O_HRT_ENTRY_getAdapterID(Entry) & 0xFFF)) {
Device->le_bus = I2O_HRT_ENTRY_getAdapterID(
Entry) >> 16;
if ((Device->le_bus > sc->ha_MaxBus)
&& (Device->le_bus <= MAX_CHANNEL)) {
sc->ha_MaxBus = Device->le_bus;
}
}
}
}
return (0);
} /* ASR_acquireHrt */
/*
* Enable the adapter.
*/
STATIC INLINE int
ASR_enableSys (
IN Asr_softc_t * sc)
{
defAlignLong(I2O_EXEC_SYS_ENABLE_MESSAGE,Message);
PI2O_EXEC_SYS_ENABLE_MESSAGE Message_Ptr;
Message_Ptr = (PI2O_EXEC_SYS_ENABLE_MESSAGE)ASR_fillMessage(Message,
sizeof(I2O_EXEC_SYS_ENABLE_MESSAGE));
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
I2O_EXEC_SYS_ENABLE);
return (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != 0);
} /* ASR_enableSys */
/*
* Perform the stages necessary to initialize the adapter
*/
STATIC int
ASR_init(
IN Asr_softc_t * sc)
{
return ((ASR_initOutBound(sc) == 0)
|| (ASR_setSysTab(sc) != CAM_REQ_CMP)
|| (ASR_enableSys(sc) != CAM_REQ_CMP));
} /* ASR_init */
/*
* Send a Synchronize Cache command to the target device.
*/
STATIC INLINE void
ASR_sync (
IN Asr_softc_t * sc,
IN int bus,
IN int target,
IN int lun)
{
tid_t TID;
/*
* We will not synchronize the device when there are outstanding
* commands issued by the OS (this is due to a locked up device,
* as the OS normally would flush all outstanding commands before
* issuing a shutdown or an adapter reset).
*/
if ((sc != (Asr_softc_t *)NULL)
&& (LIST_FIRST(&sc->ha_ccb) != (struct ccb_hdr *)NULL)
&& ((TID = ASR_getTid (sc, bus, target, lun)) != (tid_t)-1)
&& (TID != (tid_t)0)) {
defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message);
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
bzero (Message_Ptr
= getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message),
sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(
(PI2O_MESSAGE_FRAME)Message_Ptr,
I2O_VERSION_11
| (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(
(PI2O_MESSAGE_FRAME)Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT))
/ sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress (
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_MESSAGE_FRAME_setTargetAddress(
(PI2O_MESSAGE_FRAME)Message_Ptr, TID);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(Message_Ptr, TID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
DPT_ORGANIZATION_ID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
Message_Ptr->CDB[0] = SYNCHRONIZE_CACHE;
Message_Ptr->CDB[1] = (lun << 5);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
(I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
}
}
STATIC INLINE void
ASR_synchronize (
IN Asr_softc_t * sc)
{
int bus, target, lun;
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
for (target = 0; target <= sc->ha_MaxId; ++target) {
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
ASR_sync(sc,bus,target,lun);
}
}
}
}
/*
* Reset the HBA, targets and BUS.
* Currently this resets *all* the SCSI busses.
*/
STATIC INLINE void
asr_hbareset(
IN Asr_softc_t * sc)
{
ASR_synchronize (sc);
ASR_reset (sc);
} /* asr_hbareset */
/*
* A reduced copy of the real pci_map_mem, incorporating the MAX_MAP
* limit and a reduction in error checking (in the pre 4.0 case).
*/
STATIC int
asr_pci_map_mem (
#if __FreeBSD_version >= 400000
IN device_t tag,
#else
IN pcici_t tag,
#endif
IN Asr_softc_t * sc)
{
int rid;
u_int32_t p, l;
#if __FreeBSD_version >= 400000
/*
* I2O specification says we must find first *memory* mapped BAR
*/
for (rid = PCIR_MAPS;
rid < (PCIR_MAPS + 4 * sizeof(u_int32_t));
++rid) {
p = pci_read_config(tag, rid, sizeof(p));
if ((p & 1) == 0) {
break;
}
}
/*
* Give up?
*/
if (rid >= (PCIR_MAPS + 4 * sizeof(u_int32_t))) {
rid = PCIR_MAPS;
}
p = pci_read_config(tag, rid, sizeof(p));
pci_write_config(tag, rid, -1, sizeof(p));
l = 0 - (pci_read_config(tag, rid, sizeof(l)) & ~15);
pci_write_config(tag, rid, p, sizeof(p));
if (l > MAX_MAP) {
l = MAX_MAP;
}
p &= ~15;
sc->ha_mem_res = bus_alloc_resource(tag, SYS_RES_MEMORY, &rid,
p, p + l, l, RF_ACTIVE);
if (sc->ha_mem_res == (struct resource *)NULL) {
return (0);
}
sc->ha_Base = (void *)rman_get_start(sc->ha_mem_res);
if (sc->ha_Base == (void *)NULL) {
return (0);
}
sc->ha_Virt = (i2oRegs_t *) rman_get_virtual(sc->ha_mem_res);
#else
vm_size_t psize, poffs;
/*
* I2O specification says we must find first *memory* mapped BAR
*/
for (rid = PCI_MAP_REG_START;
rid < (PCI_MAP_REG_START + 4 * sizeof(u_int32_t));
++rid) {
p = pci_conf_read (tag, rid);
if ((p & 1) == 0) {
break;
}
}
if (rid >= (PCI_MAP_REG_START + 4 * sizeof(u_int32_t))) {
rid = PCI_MAP_REG_START;
}
/*
** save old mapping, get size and type of memory
**
** type is in the lowest four bits.
** If device requires 2^n bytes, the next
** n-4 bits are read as 0.
*/
sc->ha_Base = (void *)((p = pci_conf_read (tag, rid))
& PCI_MAP_MEMORY_ADDRESS_MASK);
pci_conf_write (tag, rid, 0xfffffffful);
l = pci_conf_read (tag, rid);
pci_conf_write (tag, rid, p);
/*
** check the type
*/
if (!((l & PCI_MAP_MEMORY_TYPE_MASK) == PCI_MAP_MEMORY_TYPE_32BIT_1M
&& ((u_long)sc->ha_Base & ~0xfffff) == 0)
&& ((l & PCI_MAP_MEMORY_TYPE_MASK) != PCI_MAP_MEMORY_TYPE_32BIT)) {
debug_asr_printf (
"asr_pci_map_mem failed: bad memory type=0x%x\n",
(unsigned) l);
return (0);
};
/*
** get the size.
*/
psize = -(l & PCI_MAP_MEMORY_ADDRESS_MASK);
if (psize > MAX_MAP) {
psize = MAX_MAP;
}
if ((sc->ha_Base == (void *)NULL)
|| (sc->ha_Base == (void *)PCI_MAP_MEMORY_ADDRESS_MASK)) {
debug_asr_printf ("asr_pci_map_mem: not configured by bios.\n");
return (0);
};
/*
** Truncate sc->ha_Base to page boundary.
** (Or does pmap_mapdev the job?)
*/
poffs = (u_long)sc->ha_Base - trunc_page ((u_long)sc->ha_Base);
sc->ha_Virt = (i2oRegs_t *)pmap_mapdev ((u_long)sc->ha_Base - poffs,
psize + poffs);
if (sc->ha_Virt == (i2oRegs_t *)NULL) {
return (0);
}
sc->ha_Virt = (i2oRegs_t *)((u_long)sc->ha_Virt + poffs);
#endif
return (1);
} /* asr_pci_map_mem */
/*
* A simplified copy of the real pci_map_int with additional
* registration requirements.
*/
STATIC int
asr_pci_map_int (
#if __FreeBSD_version >= 400000
IN device_t tag,
#else
IN pcici_t tag,
#endif
IN Asr_softc_t * sc)
{
#if __FreeBSD_version >= 400000
int rid = 0;
sc->ha_irq_res = bus_alloc_resource(tag, SYS_RES_IRQ, &rid,
0, ~0, 1, RF_ACTIVE | RF_SHAREABLE);
if (sc->ha_irq_res == (struct resource *)NULL) {
return (0);
}
if (bus_setup_intr(tag, sc->ha_irq_res, INTR_TYPE_CAM,
(driver_intr_t *)asr_intr, (void *)sc, &(sc->ha_intr))) {
return (0);
}
sc->ha_irq = pci_read_config(tag, PCIR_INTLINE, sizeof(char));
#else
if (!pci_map_int(tag, (pci_inthand_t *)asr_intr,
(void *)sc, &cam_imask)) {
return (0);
}
sc->ha_irq = pci_conf_read(tag, PCIR_INTLINE);
#endif
return (1);
} /* asr_pci_map_int */
/*
* Attach the devices, and virtual devices to the driver list.
*/
STATIC ATTACH_RET
asr_attach (ATTACH_ARGS)
{
Asr_softc_t * sc;
struct scsi_inquiry_data * iq;
ATTACH_SET();
if ((sc = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT | M_ZERO)) ==
(Asr_softc_t *)NULL)
{
ATTACH_RETURN(ENOMEM);
}
if (Asr_softc == (Asr_softc_t *)NULL) {
/*
* Fixup the OS revision as saved in the dptsig for the
* engine (dptioctl.h) to pick up.
*/
bcopy (osrelease, &ASR_sig.dsDescription[16], 5);
printf ("asr%d: major=%d\n", unit, asr_cdevsw.d_maj);
}
/*
* Initialize the software structure
*/
LIST_INIT(&sc->ha_ccb);
# ifdef ASR_MEASURE_PERFORMANCE
{
u_int32_t i;
// initialize free list for timeQ
sc->ha_timeQFreeHead = 0;
sc->ha_timeQFreeTail = MAX_TIMEQ_SIZE - 1;
for (i = 0; i < MAX_TIMEQ_SIZE; i++) {
sc->ha_timeQFreeList[i] = i;
}
}
# endif
/* Link us into the HA list */
{
Asr_softc_t **ha;
for (ha = &Asr_softc; *ha; ha = &((*ha)->ha_next));
*(ha) = sc;
}
{
PI2O_EXEC_STATUS_GET_REPLY status;
int size;
/*
* This is the real McCoy!
*/
if (!asr_pci_map_mem(tag, sc)) {
printf ("asr%d: could not map memory\n", unit);
ATTACH_RETURN(ENXIO);
}
/* Enable if not formerly enabled */
#if __FreeBSD_version >= 400000
pci_write_config (tag, PCIR_COMMAND,
pci_read_config (tag, PCIR_COMMAND, sizeof(char))
| PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, sizeof(char));
/* Knowledge is power, responsibility is direct */
{
struct pci_devinfo {
STAILQ_ENTRY(pci_devinfo) pci_links;
struct resource_list resources;
pcicfgregs cfg;
} * dinfo = device_get_ivars(tag);
sc->ha_pciBusNum = dinfo->cfg.bus;
sc->ha_pciDeviceNum = (dinfo->cfg.slot << 3)
| dinfo->cfg.func;
}
#else
pci_conf_write (tag, PCIR_COMMAND,
pci_conf_read (tag, PCIR_COMMAND)
| PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
/* Knowledge is power, responsibility is direct */
switch (pci_mechanism) {
case 1:
sc->ha_pciBusNum = tag.cfg1 >> 16;
sc->ha_pciDeviceNum = tag.cfg1 >> 8;
case 2:
sc->ha_pciBusNum = tag.cfg2.forward;
sc->ha_pciDeviceNum = ((tag.cfg2.enable >> 1) & 7)
| (tag.cfg2.port >> 5);
}
#endif
/* Check if the device is there? */
if ((ASR_resetIOP(sc->ha_Virt) == 0)
|| ((status = (PI2O_EXEC_STATUS_GET_REPLY)malloc (
sizeof(I2O_EXEC_STATUS_GET_REPLY), M_TEMP, M_WAITOK))
== (PI2O_EXEC_STATUS_GET_REPLY)NULL)
|| (ASR_getStatus(sc->ha_Virt, status) == NULL)) {
printf ("asr%d: could not initialize hardware\n", unit);
ATTACH_RETURN(ENODEV); /* Get next, maybe better luck */
}
sc->ha_SystemTable.OrganizationID = status->OrganizationID;
sc->ha_SystemTable.IOP_ID = status->IOP_ID;
sc->ha_SystemTable.I2oVersion = status->I2oVersion;
sc->ha_SystemTable.IopState = status->IopState;
sc->ha_SystemTable.MessengerType = status->MessengerType;
sc->ha_SystemTable.InboundMessageFrameSize
= status->InboundMFrameSize;
sc->ha_SystemTable.MessengerInfo.InboundMessagePortAddressLow
= (U32)(sc->ha_Base) + (U32)(&(((i2oRegs_t *)NULL)->ToFIFO));
if (!asr_pci_map_int(tag, (void *)sc)) {
printf ("asr%d: could not map interrupt\n", unit);
ATTACH_RETURN(ENXIO);
}
/* Adjust the maximim inbound count */
if (((sc->ha_QueueSize
= I2O_EXEC_STATUS_GET_REPLY_getMaxInboundMFrames(status))
> MAX_INBOUND)
|| (sc->ha_QueueSize == 0)) {
sc->ha_QueueSize = MAX_INBOUND;
}
/* Adjust the maximum outbound count */
if (((sc->ha_Msgs_Count
= I2O_EXEC_STATUS_GET_REPLY_getMaxOutboundMFrames(status))
> MAX_OUTBOUND)
|| (sc->ha_Msgs_Count == 0)) {
sc->ha_Msgs_Count = MAX_OUTBOUND;
}
if (sc->ha_Msgs_Count > sc->ha_QueueSize) {
sc->ha_Msgs_Count = sc->ha_QueueSize;
}
/* Adjust the maximum SG size to adapter */
if ((size = (I2O_EXEC_STATUS_GET_REPLY_getInboundMFrameSize(
status) << 2)) > MAX_INBOUND_SIZE) {
size = MAX_INBOUND_SIZE;
}
free (status, M_TEMP);
sc->ha_SgSize = (size - sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
+ sizeof(I2O_SG_ELEMENT)) / sizeof(I2O_SGE_SIMPLE_ELEMENT);
}
/*
* Only do a bus/HBA reset on the first time through. On this
* first time through, we do not send a flush to the devices.
*/
if (ASR_init(sc) == 0) {
struct BufferInfo {
I2O_PARAM_RESULTS_LIST_HEADER Header;
I2O_PARAM_READ_OPERATION_RESULT Read;
I2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
};
defAlignLong (struct BufferInfo, Buffer);
PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
# define FW_DEBUG_BLED_OFFSET 8
if ((Info = (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)
ASR_getParams(sc, 0,
I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO,
Buffer, sizeof(struct BufferInfo)))
!= (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)NULL) {
sc->ha_blinkLED = sc->ha_Virt->Address
+ I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputOffset(Info)
+ FW_DEBUG_BLED_OFFSET;
}
if (ASR_acquireLct(sc) == 0) {
(void)ASR_acquireHrt(sc);
}
} else {
printf ("asr%d: failed to initialize\n", unit);
ATTACH_RETURN(ENXIO);
}
/*
* Add in additional probe responses for more channels. We
* are reusing the variable `target' for a channel loop counter.
* Done here because of we need both the acquireLct and
* acquireHrt data.
*/
{ PI2O_LCT_ENTRY Device;
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
++Device) {
if (Device->le_type == I2O_UNKNOWN) {
continue;
}
if (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF) {
if (Device->le_target > sc->ha_MaxId) {
sc->ha_MaxId = Device->le_target;
}
if (Device->le_lun > sc->ha_MaxLun) {
sc->ha_MaxLun = Device->le_lun;
}
}
if (((Device->le_type & I2O_PORT) != 0)
&& (Device->le_bus <= MAX_CHANNEL)) {
/* Do not increase MaxId for efficiency */
sc->ha_adapter_target[Device->le_bus]
= Device->le_target;
}
}
}
/*
* Print the HBA model number as inquired from the card.
*/
printf ("asr%d:", unit);
if ((iq = (struct scsi_inquiry_data *)malloc (
sizeof(struct scsi_inquiry_data), M_TEMP, M_WAITOK | M_ZERO))
!= (struct scsi_inquiry_data *)NULL) {
defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message);
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
int posted = 0;
bzero (Message_Ptr
= getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message),
sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
I2O_MESSAGE_FRAME_setVersionOffset(
(PI2O_MESSAGE_FRAME)Message_Ptr,
I2O_VERSION_11
| (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT))
/ sizeof(U32)) << 4));
I2O_MESSAGE_FRAME_setMessageSize(
(PI2O_MESSAGE_FRAME)Message_Ptr,
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT))
/ sizeof(U32));
I2O_MESSAGE_FRAME_setInitiatorAddress (
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
I2O_MESSAGE_FRAME_setFunction(
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
I2O_SCSI_SCB_EXEC);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setInterpret(Message_Ptr, 1);
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
DPT_ORGANIZATION_ID);
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
Message_Ptr->CDB[0] = INQUIRY;
Message_Ptr->CDB[4] = (unsigned char)sizeof(struct scsi_inquiry_data);
if (Message_Ptr->CDB[4] == 0) {
Message_Ptr->CDB[4] = 255;
}
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
(I2O_SCB_FLAG_XFER_FROM_DEVICE
| I2O_SCB_FLAG_ENABLE_DISCONNECT
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
sizeof(struct scsi_inquiry_data));
SG(&(Message_Ptr->SGL), 0,
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
iq, sizeof(struct scsi_inquiry_data));
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
if (iq->vendor[0] && (iq->vendor[0] != ' ')) {
printf (" ");
ASR_prstring (iq->vendor, 8);
++posted;
}
if (iq->product[0] && (iq->product[0] != ' ')) {
printf (" ");
ASR_prstring (iq->product, 16);
++posted;
}
if (iq->revision[0] && (iq->revision[0] != ' ')) {
printf (" FW Rev. ");
ASR_prstring (iq->revision, 4);
++posted;
}
free ((caddr_t)iq, M_TEMP);
if (posted) {
printf (",");
}
}
printf (" %d channel, %d CCBs, Protocol I2O\n", sc->ha_MaxBus + 1,
(sc->ha_QueueSize > MAX_INBOUND) ? MAX_INBOUND : sc->ha_QueueSize);
/*
* fill in the prototype cam_path.
*/
{
int bus;
union asr_ccb * ccb;
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
printf ("asr%d: CAM could not be notified of asynchronous callback parameters\n", unit);
ATTACH_RETURN(ENOMEM);
}
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
struct cam_devq * devq;
int QueueSize = sc->ha_QueueSize;
if (QueueSize > MAX_INBOUND) {
QueueSize = MAX_INBOUND;
}
/*
* Create the device queue for our SIM(s).
*/
if ((devq = cam_simq_alloc(QueueSize)) == NULL) {
continue;
}
/*
* Construct our first channel SIM entry
*/
sc->ha_sim[bus] = cam_sim_alloc(
asr_action, asr_poll, "asr", sc,
unit, 1, QueueSize, devq);
if (sc->ha_sim[bus] == NULL) {
continue;
}
if (xpt_bus_register(sc->ha_sim[bus], bus)
!= CAM_SUCCESS) {
cam_sim_free(sc->ha_sim[bus],
/*free_devq*/TRUE);
sc->ha_sim[bus] = NULL;
continue;
}
if (xpt_create_path(&(sc->ha_path[bus]), /*periph*/NULL,
cam_sim_path(sc->ha_sim[bus]), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(
cam_sim_path(sc->ha_sim[bus]));
cam_sim_free(sc->ha_sim[bus],
/*free_devq*/TRUE);
sc->ha_sim[bus] = NULL;
continue;
}
xpt_setup_ccb(&(ccb->ccb_h),
sc->ha_path[bus], /*priority*/5);
ccb->ccb_h.func_code = XPT_SASYNC_CB;
ccb->csa.event_enable = AC_LOST_DEVICE;
ccb->csa.callback = asr_async;
ccb->csa.callback_arg = sc->ha_sim[bus];
xpt_action((union ccb *)ccb);
}
asr_free_ccb (ccb);
}
/*
* Generate the device node information
*/
(void)make_dev(&asr_cdevsw, unit, 0, 0, S_IRWXU, "rasr%d", unit);
destroy_dev(makedev(asr_cdevsw.d_maj,unit+1));
ATTACH_RETURN(0);
} /* asr_attach */
#if (!defined(UNREFERENCED_PARAMETER))
# define UNREFERENCED_PARAMETER(x) (void)(x)
#endif
STATIC void
asr_async(
void * callback_arg,
u_int32_t code,
struct cam_path * path,
void * arg)
{
UNREFERENCED_PARAMETER(callback_arg);
UNREFERENCED_PARAMETER(code);
UNREFERENCED_PARAMETER(path);
UNREFERENCED_PARAMETER(arg);
} /* asr_async */
STATIC void
asr_poll(
IN struct cam_sim *sim)
{
asr_intr(cam_sim_softc(sim));
} /* asr_poll */
STATIC void
asr_action(
IN struct cam_sim * sim,
IN union ccb * ccb)
{
struct Asr_softc * sc;
debug_asr_printf ("asr_action(%lx,%lx{%x})\n",
(u_long)sim, (u_long)ccb, ccb->ccb_h.func_code);
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("asr_action\n"));
ccb->ccb_h.spriv_ptr0 = sc = (struct Asr_softc *)cam_sim_softc(sim);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_SCSI_IO: /* Execute the requested I/O operation */
{
struct Message {
char M[MAX_INBOUND_SIZE];
};
defAlignLong(struct Message,Message);
PI2O_MESSAGE_FRAME Message_Ptr;
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
printf(
"asr%d WARNING: scsi_cmd(%x) already done on b%dt%du%d\n",
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
ccb->csio.cdb_io.cdb_bytes[0],
cam_sim_bus(sim),
ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
}
debug_asr_cmd_printf ("(%d,%d,%d,%d)",
cam_sim_unit(sim),
cam_sim_bus(sim),
ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
debug_asr_cmd_dump_ccb(ccb);
if ((Message_Ptr = ASR_init_message ((union asr_ccb *)ccb,
(PI2O_MESSAGE_FRAME)Message)) != (PI2O_MESSAGE_FRAME)NULL) {
debug_asr_cmd2_printf ("TID=%x:\n",
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getTID(
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr));
debug_asr_cmd2_dump_message(Message_Ptr);
debug_asr_cmd1_printf (" q");
if (ASR_queue (sc, Message_Ptr) == EMPTY_QUEUE) {
#ifdef ASR_MEASURE_PERFORMANCE
++sc->ha_performance.command_too_busy;
#endif
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
debug_asr_cmd_printf (" E\n");
xpt_done(ccb);
}
debug_asr_cmd_printf (" Q\n");
break;
}
/*
* We will get here if there is no valid TID for the device
* referenced in the scsi command packet.
*/
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
debug_asr_cmd_printf (" B\n");
xpt_done(ccb);
break;
}
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
/* Rese HBA device ... */
asr_hbareset (sc);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
# if (defined(REPORT_LUNS))
case REPORT_LUNS:
# endif
case XPT_ABORT: /* Abort the specified CCB */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS:
/* XXX Implement */
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
struct ccb_trans_settings *cts;
u_int target_mask;
cts = &ccb->cts;
target_mask = 0x01 << ccb->ccb_h.target_id;
if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) {
cts->flags = CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB;
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
cts->sync_period = 6; /* 40MHz */
cts->sync_offset = 15;
cts->valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID
| CCB_TRANS_BUS_WIDTH_VALID
| CCB_TRANS_DISC_VALID
| CCB_TRANS_TQ_VALID;
ccb->ccb_h.status = CAM_REQ_CMP;
} else {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
}
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
if (size_mb > 4096) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else if (size_mb > 2048) {
ccg->heads = 128;
ccg->secs_per_track = 63;
} else if (size_mb > 1024) {
ccg->heads = 65;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
ASR_resetBus (sc, cam_sim_bus(sim));
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
/* Not necessary to reset bus, done by HDM initialization */
cpi->hba_misc = PIM_NOBUSRESET;
cpi->hba_eng_cnt = 0;
cpi->max_target = sc->ha_MaxId;
cpi->max_lun = sc->ha_MaxLun;
cpi->initiator_id = sc->ha_adapter_target[cam_sim_bus(sim)];
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
} /* asr_action */
#ifdef ASR_MEASURE_PERFORMANCE
#define WRITE_OP 1
#define READ_OP 2
#define min_submitR sc->ha_performance.read_by_size_min_time[index]
#define max_submitR sc->ha_performance.read_by_size_max_time[index]
#define min_submitW sc->ha_performance.write_by_size_min_time[index]
#define max_submitW sc->ha_performance.write_by_size_max_time[index]
STATIC INLINE void
asr_IObySize(
IN Asr_softc_t * sc,
IN u_int32_t submitted_time,
IN int op,
IN int index)
{
struct timeval submitted_timeval;
submitted_timeval.tv_sec = 0;
submitted_timeval.tv_usec = submitted_time;
if ( op == READ_OP ) {
++sc->ha_performance.read_by_size_count[index];
if ( submitted_time != 0xffffffff ) {
timevaladd(
&sc->ha_performance.read_by_size_total_time[index],
&submitted_timeval);
if ( (min_submitR == 0)
|| (submitted_time < min_submitR) ) {
min_submitR = submitted_time;
}
if ( submitted_time > max_submitR ) {
max_submitR = submitted_time;
}
}
} else {
++sc->ha_performance.write_by_size_count[index];
if ( submitted_time != 0xffffffff ) {
timevaladd(
&sc->ha_performance.write_by_size_total_time[index],
&submitted_timeval);
if ( (submitted_time < min_submitW)
|| (min_submitW == 0) ) {
min_submitW = submitted_time;
}
if ( submitted_time > max_submitW ) {
max_submitW = submitted_time;
}
}
}
} /* asr_IObySize */
#endif
/*
* Handle processing of current CCB as pointed to by the Status.
*/
STATIC int
asr_intr (
IN Asr_softc_t * sc)
{
OUT int processed;
#ifdef ASR_MEASURE_PERFORMANCE
struct timeval junk;
microtime(&junk);
sc->ha_performance.intr_started = junk;
#endif
for (processed = 0;
sc->ha_Virt->Status & Mask_InterruptsDisabled;
processed = 1) {
union asr_ccb * ccb;
U32 ReplyOffset;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
if (((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE)
&& ((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE)) {
break;
}
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)(ReplyOffset
- sc->ha_Msgs_Phys + (char *)(sc->ha_Msgs));
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(
&(Reply->StdReplyFrame.StdMessageFrame));
if (I2O_MESSAGE_FRAME_getMsgFlags(
&(Reply->StdReplyFrame.StdMessageFrame))
& I2O_MESSAGE_FLAGS_FAIL) {
defAlignLong(I2O_UTIL_NOP_MESSAGE,Message);
PI2O_UTIL_NOP_MESSAGE Message_Ptr;
U32 MessageOffset;
MessageOffset = (u_long)
I2O_FAILURE_REPLY_MESSAGE_FRAME_getPreservedMFA(
(PI2O_FAILURE_REPLY_MESSAGE_FRAME)Reply);
/*
* Get the Original Message Frame's address, and get
* it's Transaction Context into our space. (Currently
* unused at original authorship, but better to be
* safe than sorry). Straight copy means that we
* need not concern ourselves with the (optional
* byteswapping) method access.
*/
Reply->StdReplyFrame.TransactionContext
= ((PI2O_SINGLE_REPLY_MESSAGE_FRAME)
(sc->ha_Virt->Address + MessageOffset))
->TransactionContext;
/*
* For 64 bit machines, we need to reconstruct the
* 64 bit context.
*/
ccb = (union asr_ccb *)(long)
I2O_MESSAGE_FRAME_getInitiatorContext64(
&(Reply->StdReplyFrame.StdMessageFrame));
/*
* Unique error code for command failure.
*/
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply->StdReplyFrame), (u_int16_t)-2);
/*
* Modify the message frame to contain a NOP and
* re-issue it to the controller.
*/
Message_Ptr = (PI2O_UTIL_NOP_MESSAGE)ASR_fillMessage(
Message, sizeof(I2O_UTIL_NOP_MESSAGE));
# if (I2O_UTIL_NOP != 0)
I2O_MESSAGE_FRAME_setFunction (
&(Message_Ptr->StdMessageFrame),
I2O_UTIL_NOP);
# endif
/*
* Copy the packet out to the Original Message
*/
bcopy ((caddr_t)Message_Ptr,
sc->ha_Virt->Address + MessageOffset,
sizeof(I2O_UTIL_NOP_MESSAGE));
/*
* Issue the NOP
*/
sc->ha_Virt->ToFIFO = MessageOffset;
}
/*
* Asynchronous command with no return requirements,
* and a generic handler for immunity against odd error
* returns from the adapter.
*/
if (ccb == (union asr_ccb *)NULL) {
/*
* Return Reply so that it can be used for the
* next command
*/
sc->ha_Virt->FromFIFO = ReplyOffset;
continue;
}
/* Welease Wadjah! (and stop timeouts) */
ASR_ccbRemove (sc, ccb);
switch (
I2O_SINGLE_REPLY_MESSAGE_FRAME_getDetailedStatusCode(
&(Reply->StdReplyFrame))) {
case I2O_SCSI_DSC_SUCCESS:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP;
break;
case I2O_SCSI_DSC_CHECK_CONDITION:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP|CAM_AUTOSNS_VALID;
break;
case I2O_SCSI_DSC_BUSY:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_ADAPTER_BUSY:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_SCSI_BUS_RESET:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_BUS_BUSY:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_SCSI_BUSY;
break;
case I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
break;
case I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_LUN_INVALID:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_SCSI_TID_INVALID:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
break;
case I2O_SCSI_HBA_DSC_DATA_OVERRUN:
/* FALLTHRU */
case I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_DATA_RUN_ERR;
break;
default:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
break;
}
if ((ccb->csio.resid = ccb->csio.dxfer_len) != 0) {
ccb->csio.resid -=
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getTransferCount(
Reply);
}
#ifdef ASR_MEASURE_PERFORMANCE
{
struct timeval endTime;
u_int32_t submitted_time;
u_int32_t size;
int op_type;
int startTimeIndex;
--sc->ha_submitted_ccbs_count;
startTimeIndex
= (int)Reply->StdReplyFrame.TransactionContext;
if (-1 != startTimeIndex) {
/* Compute the time spent in device/adapter */
microtime(&endTime);
submitted_time = asr_time_delta(sc->ha_timeQ[
startTimeIndex], endTime);
/* put the startTimeIndex back on free list */
ENQ_TIMEQ_FREE_LIST(startTimeIndex,
sc->ha_timeQFreeList,
sc->ha_timeQFreeHead,
sc->ha_timeQFreeTail);
} else {
submitted_time = 0xffffffff;
}
#define maxctime sc->ha_performance.max_command_time[ccb->csio.cdb_io.cdb_bytes[0]]
#define minctime sc->ha_performance.min_command_time[ccb->csio.cdb_io.cdb_bytes[0]]
if (submitted_time != 0xffffffff) {
if ( maxctime < submitted_time ) {
maxctime = submitted_time;
}
if ( (minctime == 0)
|| (minctime > submitted_time) ) {
minctime = submitted_time;
}
if ( sc->ha_performance.max_submit_time
< submitted_time ) {
sc->ha_performance.max_submit_time
= submitted_time;
}
if ( sc->ha_performance.min_submit_time == 0
|| sc->ha_performance.min_submit_time
> submitted_time) {
sc->ha_performance.min_submit_time
= submitted_time;
}
switch ( ccb->csio.cdb_io.cdb_bytes[0] ) {
case 0xa8: /* 12-byte READ */
/* FALLTHRU */
case 0x08: /* 6-byte READ */
/* FALLTHRU */
case 0x28: /* 10-byte READ */
op_type = READ_OP;
break;
case 0x0a: /* 6-byte WRITE */
/* FALLTHRU */
case 0xaa: /* 12-byte WRITE */
/* FALLTHRU */
case 0x2a: /* 10-byte WRITE */
op_type = WRITE_OP;
break;
default:
op_type = 0;
break;
}
if ( op_type != 0 ) {
struct scsi_rw_big * cmd;
cmd = (struct scsi_rw_big *)
&(ccb->csio.cdb_io);
size = (((u_int32_t) cmd->length2 << 8)
| ((u_int32_t) cmd->length1)) << 9;
switch ( size ) {
case 512:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_512);
break;
case 1024:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_1K);
break;
case 2048:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_2K);
break;
case 4096:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_4K);
break;
case 8192:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_8K);
break;
case 16384:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_16K);
break;
case 32768:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_32K);
break;
case 65536:
asr_IObySize(sc,
submitted_time, op_type,
SIZE_64K);
break;
default:
if ( size > (1 << 16) ) {
asr_IObySize(sc,
submitted_time,
op_type,
SIZE_BIGGER);
} else {
asr_IObySize(sc,
submitted_time,
op_type,
SIZE_OTHER);
}
break;
}
}
}
}
#endif
/* Sense data in reply packet */
if (ccb->ccb_h.status & CAM_AUTOSNS_VALID) {
u_int16_t size = I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getAutoSenseTransferCount(Reply);
if (size) {
if (size > sizeof(ccb->csio.sense_data)) {
size = sizeof(ccb->csio.sense_data);
}
if (size > I2O_SCSI_SENSE_DATA_SZ) {
size = I2O_SCSI_SENSE_DATA_SZ;
}
if ((ccb->csio.sense_len)
&& (size > ccb->csio.sense_len)) {
size = ccb->csio.sense_len;
}
bcopy ((caddr_t)Reply->SenseData,
(caddr_t)&(ccb->csio.sense_data), size);
}
}
/*
* Return Reply so that it can be used for the next command
* since we have no more need for it now
*/
sc->ha_Virt->FromFIFO = ReplyOffset;
if (ccb->ccb_h.path) {
xpt_done ((union ccb *)ccb);
} else {
wakeup ((caddr_t)ccb);
}
}
#ifdef ASR_MEASURE_PERFORMANCE
{
u_int32_t result;
microtime(&junk);
result = asr_time_delta(sc->ha_performance.intr_started, junk);
if (result != 0xffffffff) {
if ( sc->ha_performance.max_intr_time < result ) {
sc->ha_performance.max_intr_time = result;
}
if ( (sc->ha_performance.min_intr_time == 0)
|| (sc->ha_performance.min_intr_time > result) ) {
sc->ha_performance.min_intr_time = result;
}
}
}
#endif
return (processed);
} /* asr_intr */
#undef QueueSize /* Grrrr */
#undef SG_Size /* Grrrr */
/*
* Meant to be included at the bottom of asr.c !!!
*/
/*
* Included here as hard coded. Done because other necessary include
* files utilize C++ comment structures which make them a nuisance to
* included here just to pick up these three typedefs.
*/
typedef U32 DPT_TAG_T;
typedef U32 DPT_MSG_T;
typedef U32 DPT_RTN_T;
#undef SCSI_RESET /* Conflicts with "scsi/scsiconf.h" defintion */
#include "dev/asr/osd_unix.h"
#define asr_unit(dev) minor(dev)
STATIC INLINE Asr_softc_t *
ASR_get_sc (
IN dev_t dev)
{
int unit = asr_unit(dev);
OUT Asr_softc_t * sc = Asr_softc;
while (sc && sc->ha_sim[0] && (cam_sim_unit(sc->ha_sim[0]) != unit)) {
sc = sc->ha_next;
}
return (sc);
} /* ASR_get_sc */
STATIC u_int8_t ASR_ctlr_held;
STATIC int
asr_open(
IN dev_t dev,
int32_t flags,
int32_t ifmt,
IN struct proc * proc)
{
int s;
OUT int error;
UNREFERENCED_PARAMETER(flags);
UNREFERENCED_PARAMETER(ifmt);
if (ASR_get_sc (dev) == (Asr_softc_t *)NULL) {
return (ENODEV);
}
s = splcam ();
if (ASR_ctlr_held) {
error = EBUSY;
} else if ((error = suser(proc)) == 0) {
++ASR_ctlr_held;
}
splx(s);
return (error);
} /* asr_open */
STATIC int
asr_close(
dev_t dev,
int flags,
int ifmt,
struct proc * proc)
{
UNREFERENCED_PARAMETER(dev);
UNREFERENCED_PARAMETER(flags);
UNREFERENCED_PARAMETER(ifmt);
UNREFERENCED_PARAMETER(proc);
ASR_ctlr_held = 0;
return (0);
} /* asr_close */
/*-------------------------------------------------------------------------*/
/* Function ASR_queue_i */
/*-------------------------------------------------------------------------*/
/* The Parameters Passed To This Function Are : */
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
/* PI2O_MESSAGE_FRAME : Msg Structure Pointer For This Command */
/* I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME following the Msg Structure */
/* */
/* This Function Will Take The User Request Packet And Convert It To An */
/* I2O MSG And Send It Off To The Adapter. */
/* */
/* Return : 0 For OK, Error Code Otherwise */
/*-------------------------------------------------------------------------*/
STATIC INLINE int
ASR_queue_i(
IN Asr_softc_t * sc,
INOUT PI2O_MESSAGE_FRAME Packet)
{
union asr_ccb * ccb;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
PI2O_MESSAGE_FRAME Message_Ptr;
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply_Ptr;
int MessageSizeInBytes;
int ReplySizeInBytes;
int error;
int s;
/* Scatter Gather buffer list */
struct ioctlSgList_S {
SLIST_ENTRY(ioctlSgList_S) link;
caddr_t UserSpace;
I2O_FLAGS_COUNT FlagsCount;
char KernelSpace[sizeof(long)];
} * elm;
/* Generates a `first' entry */
SLIST_HEAD(ioctlSgListHead_S, ioctlSgList_S) sgList;
if (ASR_getBlinkLedCode(sc)) {
debug_usr_cmd_printf ("Adapter currently in BlinkLed %x\n",
ASR_getBlinkLedCode(sc));
return (EIO);
}
/* Copy in the message into a local allocation */
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK))
== (PI2O_MESSAGE_FRAME)NULL) {
debug_usr_cmd_printf (
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
sizeof(I2O_MESSAGE_FRAME))) != 0) {
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Can't copy in packet errno=%d\n", error);
return (error);
}
/* Acquire information to determine type of packet */
MessageSizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)<<2);
/* The offset of the reply information within the user packet */
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)((char *)Packet
+ MessageSizeInBytes);
/* Check if the message is a synchronous initialization command */
s = I2O_MESSAGE_FRAME_getFunction(Message_Ptr);
free (Message_Ptr, M_TEMP);
switch (s) {
case I2O_EXEC_IOP_RESET:
{ U32 status;
status = ASR_resetIOP(sc->ha_Virt);
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("resetIOP done\n");
return (copyout ((caddr_t)&status, (caddr_t)Reply,
ReplySizeInBytes));
}
case I2O_EXEC_STATUS_GET:
{ I2O_EXEC_STATUS_GET_REPLY status;
if (ASR_getStatus (sc->ha_Virt, &status)
== (PI2O_EXEC_STATUS_GET_REPLY)NULL) {
debug_usr_cmd_printf ("getStatus failed\n");
return (ENXIO);
}
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("getStatus done\n");
return (copyout ((caddr_t)&status, (caddr_t)Reply,
ReplySizeInBytes));
}
case I2O_EXEC_OUTBOUND_INIT:
{ U32 status;
status = ASR_initOutBound(sc);
ReplySizeInBytes = sizeof(status);
debug_usr_cmd_printf ("intOutBound done\n");
return (copyout ((caddr_t)&status, (caddr_t)Reply,
ReplySizeInBytes));
}
}
/* Determine if the message size is valid */
if ((MessageSizeInBytes < sizeof(I2O_MESSAGE_FRAME))
|| (MAX_INBOUND_SIZE < MessageSizeInBytes)) {
debug_usr_cmd_printf ("Packet size %d incorrect\n",
MessageSizeInBytes);
return (EINVAL);
}
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (MessageSizeInBytes,
M_TEMP, M_WAITOK)) == (PI2O_MESSAGE_FRAME)NULL) {
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
MessageSizeInBytes);
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
MessageSizeInBytes)) != 0) {
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Can't copy in packet[%d] errno=%d\n",
MessageSizeInBytes, error);
return (error);
}
/* Check the size of the reply frame, and start constructing */
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK))
== (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
return (ENOMEM);
}
if ((error = copyin ((caddr_t)Reply, (caddr_t)Reply_Ptr,
sizeof(I2O_MESSAGE_FRAME))) != 0) {
free (Reply_Ptr, M_TEMP);
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to copy in reply frame, errno=%d\n",
error);
return (error);
}
ReplySizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame)) << 2);
free (Reply_Ptr, M_TEMP);
if (ReplySizeInBytes < sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME)) {
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf (
"Failed to copy in reply frame[%d], errno=%d\n",
ReplySizeInBytes, error);
return (EINVAL);
}
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
((ReplySizeInBytes > sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME))
? ReplySizeInBytes
: sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)),
M_TEMP, M_WAITOK)) == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
free (Message_Ptr, M_TEMP);
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
ReplySizeInBytes);
return (ENOMEM);
}
(void)ASR_fillMessage ((char *)Reply_Ptr, ReplySizeInBytes);
Reply_Ptr->StdReplyFrame.StdMessageFrame.InitiatorContext
= Message_Ptr->InitiatorContext;
Reply_Ptr->StdReplyFrame.TransactionContext
= ((PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr)->TransactionContext;
I2O_MESSAGE_FRAME_setMsgFlags(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
I2O_MESSAGE_FRAME_getMsgFlags(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame))
| I2O_MESSAGE_FLAGS_REPLY);
/* Check if the message is a special case command */
switch (I2O_MESSAGE_FRAME_getFunction(Message_Ptr)) {
case I2O_EXEC_SYS_TAB_SET: /* Special Case of empty Scatter Gather */
if (MessageSizeInBytes == ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)) {
free (Message_Ptr, M_TEMP);
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply_Ptr->StdReplyFrame), (ASR_setSysTab(sc) != CAM_REQ_CMP));
I2O_MESSAGE_FRAME_setMessageSize(
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME));
error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply,
ReplySizeInBytes);
free (Reply_Ptr, M_TEMP);
return (error);
}
}
/* Deal in the general case */
/* First allocate and optionally copy in each scatter gather element */
SLIST_INIT(&sgList);
if ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0) != 0) {
PI2O_SGE_SIMPLE_ELEMENT sg;
/*
* since this code is reused in several systems, code
* efficiency is greater by using a shift operation rather
* than a divide by sizeof(u_int32_t).
*/
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0)
>> 2));
while (sg < (PI2O_SGE_SIMPLE_ELEMENT)(((caddr_t)Message_Ptr)
+ MessageSizeInBytes)) {
caddr_t v;
int len;
if ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
& I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT) == 0) {
error = EINVAL;
break;
}
len = I2O_FLAGS_COUNT_getCount(&(sg->FlagsCount));
debug_usr_cmd_printf ("SG[%d] = %x[%d]\n",
sg - (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)),
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg), len);
if ((elm = (struct ioctlSgList_S *)malloc (
sizeof(*elm) - sizeof(elm->KernelSpace) + len,
M_TEMP, M_WAITOK))
== (struct ioctlSgList_S *)NULL) {
debug_usr_cmd_printf (
"Failed to allocate SG[%d]\n", len);
error = ENOMEM;
break;
}
SLIST_INSERT_HEAD(&sgList, elm, link);
elm->FlagsCount = sg->FlagsCount;
elm->UserSpace = (caddr_t)
(I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg));
v = elm->KernelSpace;
/* Copy in outgoing data (DIR bit could be invalid) */
if ((error = copyin (elm->UserSpace, (caddr_t)v, len))
!= 0) {
break;
}
/*
* If the buffer is not contiguous, lets
* break up the scatter/gather entries.
*/
while ((len > 0)
&& (sg < (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)Message_Ptr) + MAX_INBOUND_SIZE))) {
int next, base, span;
span = 0;
next = base = KVTOPHYS(v);
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg,
base);
/* How far can we go physically contiguously */
while ((len > 0) && (base == next)) {
int size;
next = trunc_page(base) + PAGE_SIZE;
size = next - base;
if (size > len) {
size = len;
}
span += size;
v += size;
len -= size;
base = KVTOPHYS(v);
}
/* Construct the Flags */
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount),
span);
{
int flags = I2O_FLAGS_COUNT_getFlags(
&(elm->FlagsCount));
/* Any remaining length? */
if (len > 0) {
flags &=
~(I2O_SGL_FLAGS_END_OF_BUFFER
| I2O_SGL_FLAGS_LAST_ELEMENT);
}
I2O_FLAGS_COUNT_setFlags(
&(sg->FlagsCount), flags);
}
debug_usr_cmd_printf ("sg[%d] = %x[%d]\n",
sg - (PI2O_SGE_SIMPLE_ELEMENT)
((char *)Message_Ptr
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
Message_Ptr) & 0xF0) >> 2)),
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg),
span);
if (len <= 0) {
break;
}
/*
* Incrementing requires resizing of the
* packet, and moving up the existing SG
* elements.
*/
++sg;
MessageSizeInBytes += sizeof(*sg);
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)
+ (sizeof(*sg) / sizeof(U32)));
{
PI2O_MESSAGE_FRAME NewMessage_Ptr;
if ((NewMessage_Ptr
= (PI2O_MESSAGE_FRAME)
malloc (MessageSizeInBytes,
M_TEMP, M_WAITOK))
== (PI2O_MESSAGE_FRAME)NULL) {
debug_usr_cmd_printf (
"Failed to acquire frame[%d] memory\n",
MessageSizeInBytes);
error = ENOMEM;
break;
}
span = ((caddr_t)sg)
- (caddr_t)Message_Ptr;
bcopy ((caddr_t)Message_Ptr,
(caddr_t)NewMessage_Ptr, span);
bcopy ((caddr_t)(sg-1),
((caddr_t)NewMessage_Ptr) + span,
MessageSizeInBytes - span);
free (Message_Ptr, M_TEMP);
sg = (PI2O_SGE_SIMPLE_ELEMENT)
(((caddr_t)NewMessage_Ptr) + span);
Message_Ptr = NewMessage_Ptr;
}
}
if ((error)
|| ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
& I2O_SGL_FLAGS_LAST_ELEMENT) != 0)) {
break;
}
++sg;
}
if (error) {
while ((elm = SLIST_FIRST(&sgList))
!= (struct ioctlSgList_S *)NULL) {
SLIST_REMOVE_HEAD(&sgList,link);
free (elm, M_TEMP);
}
free (Reply_Ptr, M_TEMP);
free (Message_Ptr, M_TEMP);
return (error);
}
}
debug_usr_cmd_printf ("Inbound: ");
debug_usr_cmd_dump_message(Message_Ptr);
/* Send the command */
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList))
!= (struct ioctlSgList_S *)NULL) {
SLIST_REMOVE_HEAD(&sgList,link);
free (elm, M_TEMP);
}
free (Reply_Ptr, M_TEMP);
free (Message_Ptr, M_TEMP);
return (ENOMEM);
}
/*
* We do not need any (optional byteswapping) method access to
* the Initiator context field.
*/
I2O_MESSAGE_FRAME_setInitiatorContext64(
(PI2O_MESSAGE_FRAME)Message_Ptr, (long)ccb);
(void)ASR_queue (sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
free (Message_Ptr, M_TEMP);
/*
* Wait for the board to report a finished instruction.
*/
s = splcam();
while (ccb->ccb_h.status == CAM_REQ_INPROG) {
if (ASR_getBlinkLedCode(sc)) {
/* Reset Adapter */
printf ("asr%d: Blink LED 0x%x resetting adapter\n",
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
ASR_getBlinkLedCode(sc));
ASR_reset (sc);
splx(s);
/* Command Cleanup */
ASR_ccbRemove(sc, ccb);
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList))
!= (struct ioctlSgList_S *)NULL) {
SLIST_REMOVE_HEAD(&sgList,link);
free (elm, M_TEMP);
}
free (Reply_Ptr, M_TEMP);
asr_free_ccb(ccb);
return (EIO);
}
/* Check every second for BlinkLed */
/* There is no PRICAM, but outwardly PRIBIO is functional */
tsleep((caddr_t)ccb, PRIBIO, "asr", hz);
}
splx(s);
debug_usr_cmd_printf ("Outbound: ");
debug_usr_cmd_dump_message(Reply_Ptr);
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
&(Reply_Ptr->StdReplyFrame), (ccb->ccb_h.status != CAM_REQ_CMP));
if (ReplySizeInBytes >= (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ - sizeof(U32))) {
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setTransferCount(Reply_Ptr,
ccb->csio.dxfer_len - ccb->csio.resid);
}
if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) && (ReplySizeInBytes
> (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ))) {
int size = ReplySizeInBytes
- sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
- I2O_SCSI_SENSE_DATA_SZ;
if (size > sizeof(ccb->csio.sense_data)) {
size = sizeof(ccb->csio.sense_data);
}
bcopy ((caddr_t)&(ccb->csio.sense_data), (caddr_t)Reply_Ptr->SenseData,
size);
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setAutoSenseTransferCount(
Reply_Ptr, size);
}
/* Free up in-kernel buffers */
while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) {
/* Copy out as necessary */
if ((error == 0)
/* DIR bit considered `valid', error due to ignorance works */
&& ((I2O_FLAGS_COUNT_getFlags(&(elm->FlagsCount))
& I2O_SGL_FLAGS_DIR) == 0)) {
error = copyout ((caddr_t)(elm->KernelSpace),
elm->UserSpace,
I2O_FLAGS_COUNT_getCount(&(elm->FlagsCount)));
}
SLIST_REMOVE_HEAD(&sgList,link);
free (elm, M_TEMP);
}
if (error == 0) {
/* Copy reply frame to user space */
error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply,
ReplySizeInBytes);
}
free (Reply_Ptr, M_TEMP);
asr_free_ccb(ccb);
return (error);
} /* ASR_queue_i */
/*----------------------------------------------------------------------*/
/* Function asr_ioctl */
/*----------------------------------------------------------------------*/
/* The parameters passed to this function are : */
/* dev : Device number. */
/* cmd : Ioctl Command */
/* data : User Argument Passed In. */
/* flag : Mode Parameter */
/* proc : Process Parameter */
/* */
/* This function is the user interface into this adapter driver */
/* */
/* Return : zero if OK, error code if not */
/*----------------------------------------------------------------------*/
STATIC int
asr_ioctl(
IN dev_t dev,
IN u_long cmd,
INOUT caddr_t data,
int flag,
struct proc * proc)
{
int i, j;
OUT int error = 0;
Asr_softc_t * sc = ASR_get_sc (dev);
UNREFERENCED_PARAMETER(flag);
UNREFERENCED_PARAMETER(proc);
if (sc != (Asr_softc_t *)NULL)
switch(cmd) {
case DPT_SIGNATURE:
# if (dsDescription_size != 50)
case DPT_SIGNATURE + ((50 - dsDescription_size) << 16):
# endif
if (cmd & 0xFFFF0000) {
(void)bcopy ((caddr_t)(&ASR_sig), data,
sizeof(dpt_sig_S));
return (0);
}
/* Traditional version of the ioctl interface */
case DPT_SIGNATURE & 0x0000FFFF:
return (copyout ((caddr_t)(&ASR_sig), *((caddr_t *)data),
sizeof(dpt_sig_S)));
/* Traditional version of the ioctl interface */
case DPT_CTRLINFO & 0x0000FFFF:
case DPT_CTRLINFO: {
struct {
u_int16_t length;
u_int16_t drvrHBAnum;
u_int32_t baseAddr;
u_int16_t blinkState;
u_int8_t pciBusNum;
u_int8_t pciDeviceNum;
u_int16_t hbaFlags;
u_int16_t Interrupt;
u_int32_t reserved1;
u_int32_t reserved2;
u_int32_t reserved3;
} CtlrInfo;
bzero (&CtlrInfo, sizeof(CtlrInfo));
CtlrInfo.length = sizeof(CtlrInfo) - sizeof(u_int16_t);
CtlrInfo.drvrHBAnum = asr_unit(dev);
CtlrInfo.baseAddr = (u_long)sc->ha_Base;
i = ASR_getBlinkLedCode (sc);
if (i == -1) {
i = 0;
}
CtlrInfo.blinkState = i;
CtlrInfo.pciBusNum = sc->ha_pciBusNum;
CtlrInfo.pciDeviceNum = sc->ha_pciDeviceNum;
#define FLG_OSD_PCI_VALID 0x0001
#define FLG_OSD_DMA 0x0002
#define FLG_OSD_I2O 0x0004
CtlrInfo.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
CtlrInfo.Interrupt = sc->ha_irq;
if (cmd & 0xFFFF0000) {
bcopy (&CtlrInfo, data, sizeof(CtlrInfo));
} else {
error = copyout (&CtlrInfo, *(caddr_t *)data, sizeof(CtlrInfo));
}
} return (error);
/* Traditional version of the ioctl interface */
case DPT_SYSINFO & 0x0000FFFF:
case DPT_SYSINFO: {
sysInfo_S Info;
caddr_t c_addr;
/* Kernel Specific ptok `hack' */
# define ptok(a) ((char *)(a) + KERNBASE)
bzero (&Info, sizeof(Info));
outb (0x70, 0x12);
i = inb(0x71);
j = i >> 4;
if (i == 0x0f) {
outb (0x70, 0x19);
j = inb (0x71);
}
Info.drive0CMOS = j;
j = i & 0x0f;
if (i == 0x0f) {
outb (0x70, 0x1a);
j = inb (0x71);
}
Info.drive1CMOS = j;
Info.numDrives = *((char *)ptok(0x475));
Info.processorFamily = ASR_sig.dsProcessorFamily;
switch (cpu) {
case CPU_386SX: case CPU_386:
Info.processorType = PROC_386; break;
case CPU_486SX: case CPU_486:
Info.processorType = PROC_486; break;
case CPU_586:
Info.processorType = PROC_PENTIUM; break;
case CPU_686:
Info.processorType = PROC_SEXIUM; break;
}
Info.osType = OS_BSDI_UNIX;
Info.osMajorVersion = osrelease[0] - '0';
Info.osMinorVersion = osrelease[2] - '0';
/* Info.osRevision = 0; */
/* Info.osSubRevision = 0; */
Info.busType = SI_PCI_BUS;
Info.flags = SI_CMOS_Valid | SI_NumDrivesValid
| SI_OSversionValid |SI_BusTypeValid;
/* Go Out And Look For SmartROM */
for(i = 0; i < 3; ++i) {
int k;
if (i == 0) {
j = 0xC8000;
} else if (i == 1) {
j = 0xD8000;
} else {
j = 0xDC000;
}
c_addr = ptok(j);
if (*((unsigned short *)c_addr) != 0xAA55) {
continue;
}
if (*((u_long *)(c_addr + 6)) != 0x202053) {
continue;
}
if (*((u_long *)(c_addr + 10)) != 0x545044) {
continue;
}
c_addr += 0x24;
for (k = 0; k < 64; ++k) {
if ((*((unsigned char *)(c_addr++)) == ' ')
&& (*((unsigned char *)(c_addr)) == 'v')) {
break;
}
}
if (k < 64) {
Info.smartROMMajorVersion
= *((unsigned char *)(c_addr += 3)) - '0';
Info.smartROMMinorVersion
= *((unsigned char *)(c_addr += 2));
Info.smartROMRevision
= *((unsigned char *)(++c_addr));
Info.flags |= SI_SmartROMverValid;
break;
}
}
if (i >= 3) {
Info.flags |= SI_NO_SmartROM;
}
/* Get The Conventional Memory Size From CMOS */
outb (0x70, 0x16);
j = inb (0x71);
j <<= 8;
outb (0x70, 0x15);
j |= inb(0x71);
Info.conventionalMemSize = j;
/* Get The Extended Memory Found At Power On From CMOS */
outb (0x70, 0x31);
j = inb (0x71);
j <<= 8;
outb (0x70, 0x30);
j |= inb(0x71);
Info.extendedMemSize = j;
Info.flags |= SI_MemorySizeValid;
# if (defined(THIS_IS_BROKEN))
/* If There Is 1 or 2 Drives Found, Set Up Drive Parameters */
if (Info.numDrives > 0) {
/*
* Get The Pointer From Int 41 For The First
* Drive Parameters
*/
j = ((unsigned)(*((unsigned short *)ptok(0x104+2))) << 4)
+ (unsigned)(*((unsigned short *)ptok(0x104+0)));
/*
* It appears that SmartROM's Int41/Int46 pointers
* use memory that gets stepped on by the kernel
* loading. We no longer have access to this
* geometry information but try anyways (!?)
*/
Info.drives[0].cylinders = *((unsigned char *)ptok(j));
++j;
Info.drives[0].cylinders += ((int)*((unsigned char *)
ptok(j))) << 8;
++j;
Info.drives[0].heads = *((unsigned char *)ptok(j));
j += 12;
Info.drives[0].sectors = *((unsigned char *)ptok(j));
Info.flags |= SI_DriveParamsValid;
if ((Info.drives[0].cylinders == 0)
|| (Info.drives[0].heads == 0)
|| (Info.drives[0].sectors == 0)) {
Info.flags &= ~SI_DriveParamsValid;
}
if (Info.numDrives > 1) {
/*
* Get The Pointer From Int 46 For The
* Second Drive Parameters
*/
j = ((unsigned)(*((unsigned short *)ptok(0x118+2))) << 4)
+ (unsigned)(*((unsigned short *)ptok(0x118+0)));
Info.drives[1].cylinders = *((unsigned char *)
ptok(j));
++j;
Info.drives[1].cylinders += ((int)
*((unsigned char *)ptok(j))) << 8;
++j;
Info.drives[1].heads = *((unsigned char *)
ptok(j));
j += 12;
Info.drives[1].sectors = *((unsigned char *)
ptok(j));
if ((Info.drives[1].cylinders == 0)
|| (Info.drives[1].heads == 0)
|| (Info.drives[1].sectors == 0)) {
Info.flags &= ~SI_DriveParamsValid;
}
}
}
# endif
/* Copy Out The Info Structure To The User */
if (cmd & 0xFFFF0000) {
bcopy (&Info, data, sizeof(Info));
} else {
error = copyout (&Info, *(caddr_t *)data, sizeof(Info));
}
return (error); }
/* Get The BlinkLED State */
case DPT_BLINKLED:
i = ASR_getBlinkLedCode (sc);
if (i == -1) {
i = 0;
}
if (cmd & 0xFFFF0000) {
bcopy ((caddr_t)(&i), data, sizeof(i));
} else {
error = copyout (&i, *(caddr_t *)data, sizeof(i));
}
break;
/* Get performance metrics */
#ifdef ASR_MEASURE_PERFORMANCE
case DPT_PERF_INFO:
bcopy((caddr_t) &sc->ha_performance, data,
sizeof(sc->ha_performance));
return (0);
#endif
/* Send an I2O command */
case I2OUSRCMD:
return (ASR_queue_i (sc, *((PI2O_MESSAGE_FRAME *)data)));
/* Reset and re-initialize the adapter */
case I2ORESETCMD:
ASR_reset (sc);
return (0);
/* Rescan the LCT table and resynchronize the information */
case I2ORESCANCMD:
return (ASR_rescan (sc));
}
return (EINVAL);
} /* asr_ioctl */
#ifdef ASR_MEASURE_PERFORMANCE
/*
* This function subtracts one timeval structure from another,
* Returning the result in usec.
* It assumes that less than 4 billion usecs passed form start to end.
* If times are sensless, 0xffffffff is returned.
*/
STATIC u_int32_t
asr_time_delta(
IN struct timeval start,
IN struct timeval end)
{
OUT u_int32_t result;
if (start.tv_sec > end.tv_sec) {
result = 0xffffffff;
}
else {
if (start.tv_sec == end.tv_sec) {
if (start.tv_usec > end.tv_usec) {
result = 0xffffffff;
} else {
return (end.tv_usec - start.tv_usec);
}
} else {
return (end.tv_sec - start.tv_sec) * 1000000 +
end.tv_usec + (1000000 - start.tv_usec);
}
}
return(result);
} /* asr_time_delta */
#endif