29803c2003
the countdown register. this should not be necessary but there are broken laptops that do not restore the countdown register on resume. when it happnes, it messes up the hardclock interval and system clock, which leads to the infamous "calcru: negative time" problem. Submitted by: kjc, iwasaki Reviewed by: Steve O'Hara-Smith <steveo@eircom.net> and committers. Obtained from: PAO3
1377 lines
31 KiB
C
1377 lines
31 KiB
C
/*
|
|
* APM (Advanced Power Management) BIOS Device Driver
|
|
*
|
|
* Copyright (c) 1994 UKAI, Fumitoshi.
|
|
* Copyright (c) 1994-1995 by HOSOKAWA, Tatsumi <hosokawa@jp.FreeBSD.org>
|
|
* Copyright (c) 1996 Nate Williams <nate@FreeBSD.org>
|
|
* Copyright (c) 1997 Poul-Henning Kamp <phk@FreeBSD.org>
|
|
*
|
|
* This software may be used, modified, copied, and distributed, in
|
|
* both source and binary form provided that the above copyright and
|
|
* these terms are retained. Under no circumstances is the author
|
|
* responsible for the proper functioning of this software, nor does
|
|
* the author assume any responsibility for damages incurred with its
|
|
* use.
|
|
*
|
|
* Sep, 1994 Implemented on FreeBSD 1.1.5.1R (Toshiba AVS001WD)
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/time.h>
|
|
#include <sys/reboot.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/select.h>
|
|
#include <sys/poll.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <machine/apm_bios.h>
|
|
#include <machine/segments.h>
|
|
#include <machine/clock.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <machine/pc/bios.h>
|
|
#include <machine/vm86.h>
|
|
|
|
#include <i386/apm/apm.h>
|
|
|
|
/* Used by the apm_saver screen saver module */
|
|
int apm_display __P((int newstate));
|
|
struct apm_softc apm_softc;
|
|
|
|
static void apm_resume __P((void));
|
|
static int apm_bioscall(void);
|
|
static int apm_check_function_supported __P((u_int version, u_int func));
|
|
|
|
static u_long apm_version;
|
|
|
|
int apm_evindex;
|
|
|
|
#define SCFLAG_ONORMAL 0x0000001
|
|
#define SCFLAG_OCTL 0x0000002
|
|
#define SCFLAG_OPEN (SCFLAG_ONORMAL|SCFLAG_OCTL)
|
|
|
|
#define APMDEV(dev) (minor(dev)&0x0f)
|
|
#define APMDEV_NORMAL 0
|
|
#define APMDEV_CTL 8
|
|
|
|
static struct apmhook *hook[NAPM_HOOK]; /* XXX */
|
|
|
|
#define is_enabled(foo) ((foo) ? "enabled" : "disabled")
|
|
|
|
/* Map version number to integer (keeps ordering of version numbers) */
|
|
#define INTVERSION(major, minor) ((major)*100 + (minor))
|
|
|
|
static struct callout_handle apm_timeout_ch =
|
|
CALLOUT_HANDLE_INITIALIZER(&apm_timeout_ch);
|
|
|
|
static timeout_t apm_timeout;
|
|
static d_open_t apmopen;
|
|
static d_close_t apmclose;
|
|
static d_write_t apmwrite;
|
|
static d_ioctl_t apmioctl;
|
|
static d_poll_t apmpoll;
|
|
|
|
#define CDEV_MAJOR 39
|
|
static struct cdevsw apm_cdevsw = {
|
|
/* open */ apmopen,
|
|
/* close */ apmclose,
|
|
/* read */ noread,
|
|
/* write */ apmwrite,
|
|
/* ioctl */ apmioctl,
|
|
/* poll */ apmpoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "apm",
|
|
/* maj */ CDEV_MAJOR,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ 0,
|
|
/* bmaj */ -1
|
|
};
|
|
|
|
static int apm_suspend_delay = 1;
|
|
static int apm_standby_delay = 1;
|
|
|
|
SYSCTL_INT(_machdep, OID_AUTO, apm_suspend_delay, CTLFLAG_RW, &apm_suspend_delay, 1, "");
|
|
SYSCTL_INT(_machdep, OID_AUTO, apm_standby_delay, CTLFLAG_RW, &apm_standby_delay, 1, "");
|
|
|
|
/*
|
|
* return 0 if the function successfull,
|
|
* return 1 if the function unsuccessfull,
|
|
* return -1 if the function unsupported.
|
|
*/
|
|
static int
|
|
apm_bioscall(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int errno = 0;
|
|
u_int apm_func = sc->bios.r.eax & 0xff;
|
|
|
|
if (!apm_check_function_supported(sc->intversion, apm_func)) {
|
|
#ifdef APM_DEBUG
|
|
printf("apm_bioscall: function 0x%x is not supported in v%d.%d\n",
|
|
apm_func, sc->majorversion, sc->minorversion);
|
|
#endif
|
|
return (-1);
|
|
}
|
|
|
|
sc->bios_busy = 1;
|
|
if (sc->connectmode == APM_PROT32CONNECT) {
|
|
set_bios_selectors(&sc->bios.seg,
|
|
BIOSCODE_FLAG | BIOSDATA_FLAG);
|
|
errno = bios32(&sc->bios.r,
|
|
sc->bios.entry, GSEL(GBIOSCODE32_SEL, SEL_KPL));
|
|
} else {
|
|
errno = bios16(&sc->bios, NULL);
|
|
}
|
|
sc->bios_busy = 0;
|
|
return (errno);
|
|
}
|
|
|
|
/* check whether APM function is supported (1) or not (0). */
|
|
static int
|
|
apm_check_function_supported(u_int version, u_int func)
|
|
{
|
|
/* except driver version */
|
|
if (func == APM_DRVVERSION) {
|
|
return (1);
|
|
}
|
|
|
|
switch (version) {
|
|
case INTVERSION(1, 0):
|
|
if (func > APM_GETPMEVENT) {
|
|
return (0); /* not supported */
|
|
}
|
|
break;
|
|
case INTVERSION(1, 1):
|
|
if (func > APM_ENGAGEDISENGAGEPM &&
|
|
func < APM_OEMFUNC) {
|
|
return (0); /* not supported */
|
|
}
|
|
break;
|
|
case INTVERSION(1, 2):
|
|
break;
|
|
}
|
|
|
|
return (1); /* supported */
|
|
}
|
|
|
|
/* enable/disable power management */
|
|
static int
|
|
apm_enable_disable_pm(int enable)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_ENABLEDISABLEPM;
|
|
|
|
if (sc->intversion >= INTVERSION(1, 1))
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
else
|
|
sc->bios.r.ebx = 0xffff; /* APM version 1.0 only */
|
|
sc->bios.r.ecx = enable;
|
|
sc->bios.r.edx = 0;
|
|
return (apm_bioscall());
|
|
}
|
|
|
|
/* register driver version (APM 1.1 or later) */
|
|
static int
|
|
apm_driver_version(int version)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_DRVVERSION;
|
|
sc->bios.r.ebx = 0x0;
|
|
sc->bios.r.ecx = version;
|
|
sc->bios.r.edx = 0;
|
|
|
|
if (apm_bioscall() == 0 && sc->bios.r.eax == version)
|
|
return (0);
|
|
|
|
/* Some old BIOSes don't return the connection version in %ax. */
|
|
if (sc->bios.r.eax == ((APM_BIOS << 8) | APM_DRVVERSION))
|
|
return (0);
|
|
|
|
return (1);
|
|
}
|
|
|
|
/* engage/disengage power management (APM 1.1 or later) */
|
|
static int
|
|
apm_engage_disengage_pm(int engage)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_ENGAGEDISENGAGEPM;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = engage;
|
|
sc->bios.r.edx = 0;
|
|
return (apm_bioscall());
|
|
}
|
|
|
|
/* get PM event */
|
|
static u_int
|
|
apm_getevent(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETPMEVENT;
|
|
|
|
sc->bios.r.ebx = 0;
|
|
sc->bios.r.ecx = 0;
|
|
sc->bios.r.edx = 0;
|
|
if (apm_bioscall())
|
|
return (PMEV_NOEVENT);
|
|
return (sc->bios.r.ebx & 0xffff);
|
|
}
|
|
|
|
/* suspend entire system */
|
|
static int
|
|
apm_suspend_system(int state)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = state;
|
|
sc->bios.r.edx = 0;
|
|
|
|
if (apm_bioscall()) {
|
|
printf("Entire system suspend failure: errcode = %d\n",
|
|
0xff & (sc->bios.r.eax >> 8));
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Display control */
|
|
/*
|
|
* Experimental implementation: My laptop machine can't handle this function
|
|
* If your laptop can control the display via APM, please inform me.
|
|
* HOSOKAWA, Tatsumi <hosokawa@jp.FreeBSD.org>
|
|
*/
|
|
int
|
|
apm_display(int newstate)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
|
|
sc->bios.r.ebx = PMDV_DISP0;
|
|
sc->bios.r.ecx = newstate ? PMST_APMENABLED:PMST_SUSPEND;
|
|
sc->bios.r.edx = 0;
|
|
if (apm_bioscall()) {
|
|
printf("Display off failure: errcode = %d\n",
|
|
0xff & (sc->bios.r.eax >> 8));
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Turn off the entire system.
|
|
*/
|
|
static void
|
|
apm_power_off(void *junk, int howto)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
/* Not halting powering off, or not active */
|
|
if (!(howto & RB_POWEROFF) || !apm_softc.active)
|
|
return;
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = PMST_OFF;
|
|
sc->bios.r.edx = 0;
|
|
(void) apm_bioscall();
|
|
}
|
|
|
|
/* APM Battery low handler */
|
|
static void
|
|
apm_battery_low(void)
|
|
{
|
|
printf("\007\007 * * * BATTERY IS LOW * * * \007\007");
|
|
}
|
|
|
|
/* APM hook manager */
|
|
static struct apmhook *
|
|
apm_add_hook(struct apmhook **list, struct apmhook *ah)
|
|
{
|
|
int s;
|
|
struct apmhook *p, *prev;
|
|
|
|
#ifdef APM_DEBUG
|
|
printf("Add hook \"%s\"\n", ah->ah_name);
|
|
#endif
|
|
|
|
s = splhigh();
|
|
if (ah == NULL)
|
|
panic("illegal apm_hook!");
|
|
prev = NULL;
|
|
for (p = *list; p != NULL; prev = p, p = p->ah_next)
|
|
if (p->ah_order > ah->ah_order)
|
|
break;
|
|
|
|
if (prev == NULL) {
|
|
ah->ah_next = *list;
|
|
*list = ah;
|
|
} else {
|
|
ah->ah_next = prev->ah_next;
|
|
prev->ah_next = ah;
|
|
}
|
|
splx(s);
|
|
return ah;
|
|
}
|
|
|
|
static void
|
|
apm_del_hook(struct apmhook **list, struct apmhook *ah)
|
|
{
|
|
int s;
|
|
struct apmhook *p, *prev;
|
|
|
|
s = splhigh();
|
|
prev = NULL;
|
|
for (p = *list; p != NULL; prev = p, p = p->ah_next)
|
|
if (p == ah)
|
|
goto deleteit;
|
|
panic("Tried to delete unregistered apm_hook.");
|
|
goto nosuchnode;
|
|
deleteit:
|
|
if (prev != NULL)
|
|
prev->ah_next = p->ah_next;
|
|
else
|
|
*list = p->ah_next;
|
|
nosuchnode:
|
|
splx(s);
|
|
}
|
|
|
|
|
|
/* APM driver calls some functions automatically */
|
|
static void
|
|
apm_execute_hook(struct apmhook *list)
|
|
{
|
|
struct apmhook *p;
|
|
|
|
for (p = list; p != NULL; p = p->ah_next) {
|
|
#ifdef APM_DEBUG
|
|
printf("Execute APM hook \"%s.\"\n", p->ah_name);
|
|
#endif
|
|
if ((*(p->ah_fun))(p->ah_arg))
|
|
printf("Warning: APM hook \"%s\" failed", p->ah_name);
|
|
}
|
|
}
|
|
|
|
|
|
/* establish an apm hook */
|
|
struct apmhook *
|
|
apm_hook_establish(int apmh, struct apmhook *ah)
|
|
{
|
|
if (apmh < 0 || apmh >= NAPM_HOOK)
|
|
return NULL;
|
|
|
|
return apm_add_hook(&hook[apmh], ah);
|
|
}
|
|
|
|
/* disestablish an apm hook */
|
|
void
|
|
apm_hook_disestablish(int apmh, struct apmhook *ah)
|
|
{
|
|
if (apmh < 0 || apmh >= NAPM_HOOK)
|
|
return;
|
|
|
|
apm_del_hook(&hook[apmh], ah);
|
|
}
|
|
|
|
|
|
static struct timeval suspend_time;
|
|
static struct timeval diff_time;
|
|
|
|
static int
|
|
apm_default_resume(void *arg)
|
|
{
|
|
int pl;
|
|
u_int second, minute, hour;
|
|
struct timeval resume_time, tmp_time;
|
|
|
|
/* modified for adjkerntz */
|
|
pl = splsoftclock();
|
|
i8254_restore(); /* restore timer_freq and hz */
|
|
inittodr(0); /* adjust time to RTC */
|
|
microtime(&resume_time);
|
|
getmicrotime(&tmp_time);
|
|
timevaladd(&tmp_time, &diff_time);
|
|
|
|
#ifdef FIXME
|
|
/* XXX THIS DOESN'T WORK!!! */
|
|
time = tmp_time;
|
|
#endif
|
|
|
|
#ifdef APM_FIXUP_CALLTODO
|
|
/* Calculate the delta time suspended */
|
|
timevalsub(&resume_time, &suspend_time);
|
|
/* Fixup the calltodo list with the delta time. */
|
|
adjust_timeout_calltodo(&resume_time);
|
|
#endif /* APM_FIXUP_CALLTODOK */
|
|
splx(pl);
|
|
#ifndef APM_FIXUP_CALLTODO
|
|
second = resume_time.tv_sec - suspend_time.tv_sec;
|
|
#else /* APM_FIXUP_CALLTODO */
|
|
/*
|
|
* We've already calculated resume_time to be the delta between
|
|
* the suspend and the resume.
|
|
*/
|
|
second = resume_time.tv_sec;
|
|
#endif /* APM_FIXUP_CALLTODO */
|
|
hour = second / 3600;
|
|
second %= 3600;
|
|
minute = second / 60;
|
|
second %= 60;
|
|
log(LOG_NOTICE, "resumed from suspended mode (slept %02d:%02d:%02d)\n",
|
|
hour, minute, second);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
apm_default_suspend(void *arg)
|
|
{
|
|
int pl;
|
|
|
|
pl = splsoftclock();
|
|
microtime(&diff_time);
|
|
inittodr(0);
|
|
microtime(&suspend_time);
|
|
timevalsub(&diff_time, &suspend_time);
|
|
splx(pl);
|
|
return 0;
|
|
}
|
|
|
|
static int apm_record_event __P((struct apm_softc *, u_int));
|
|
static void apm_processevent(void);
|
|
|
|
static u_int apm_op_inprog = 0;
|
|
|
|
static void
|
|
apm_do_suspend(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int error;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
apm_op_inprog = 0;
|
|
sc->suspends = sc->suspend_countdown = 0;
|
|
|
|
if (sc->initialized) {
|
|
error = DEVICE_SUSPEND(root_bus);
|
|
/*
|
|
* XXX Shouldn't ignore the error like this, but should
|
|
* instead fix the newbus code. Until that happens,
|
|
* I'm doing this to get suspend working again.
|
|
*/
|
|
if (error)
|
|
printf("DEVICE_SUSPEND error %d, ignored\n", error);
|
|
apm_execute_hook(hook[APM_HOOK_SUSPEND]);
|
|
if (apm_suspend_system(PMST_SUSPEND) == 0)
|
|
apm_processevent();
|
|
else
|
|
/* Failure, 'resume' the system again */
|
|
apm_execute_hook(hook[APM_HOOK_RESUME]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
apm_do_standby(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
apm_op_inprog = 0;
|
|
sc->standbys = sc->standby_countdown = 0;
|
|
|
|
if (sc->initialized) {
|
|
/*
|
|
* As far as standby, we don't need to execute
|
|
* all of suspend hooks.
|
|
*/
|
|
apm_default_suspend(&apm_softc);
|
|
if (apm_suspend_system(PMST_STANDBY) == 0)
|
|
apm_processevent();
|
|
}
|
|
}
|
|
|
|
static void
|
|
apm_lastreq_notify(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = PMST_LASTREQNOTIFY;
|
|
sc->bios.r.edx = 0;
|
|
apm_bioscall();
|
|
}
|
|
|
|
static int
|
|
apm_lastreq_rejected(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (apm_op_inprog == 0) {
|
|
return 1; /* no operation in progress */
|
|
}
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = PMST_LASTREQREJECT;
|
|
sc->bios.r.edx = 0;
|
|
|
|
if (apm_bioscall()) {
|
|
#ifdef APM_DEBUG
|
|
printf("apm_lastreq_rejected: failed\n");
|
|
#endif
|
|
return 1;
|
|
}
|
|
apm_op_inprog = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Public interface to the suspend/resume:
|
|
*
|
|
* Execute suspend and resume hook before and after sleep, respectively.
|
|
*
|
|
*/
|
|
|
|
void
|
|
apm_suspend(int state)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (!sc->initialized)
|
|
return;
|
|
|
|
switch (state) {
|
|
case PMST_SUSPEND:
|
|
if (sc->suspends)
|
|
return;
|
|
sc->suspends++;
|
|
sc->suspend_countdown = apm_suspend_delay;
|
|
break;
|
|
case PMST_STANDBY:
|
|
if (sc->standbys)
|
|
return;
|
|
sc->standbys++;
|
|
sc->standby_countdown = apm_standby_delay;
|
|
break;
|
|
default:
|
|
printf("apm_suspend: Unknown Suspend state 0x%x\n", state);
|
|
return;
|
|
}
|
|
|
|
apm_op_inprog++;
|
|
apm_lastreq_notify();
|
|
}
|
|
|
|
void
|
|
apm_resume(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (!sc)
|
|
return;
|
|
|
|
if (sc->initialized) {
|
|
DEVICE_RESUME(root_bus);
|
|
apm_execute_hook(hook[APM_HOOK_RESUME]);
|
|
}
|
|
}
|
|
|
|
|
|
/* get APM information */
|
|
static int
|
|
apm_get_info(apm_info_t aip)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETPWSTATUS;
|
|
sc->bios.r.ebx = PMDV_ALLDEV;
|
|
sc->bios.r.ecx = 0;
|
|
sc->bios.r.edx = 0xffff; /* default to unknown battery time */
|
|
|
|
if (apm_bioscall())
|
|
return 1;
|
|
|
|
aip->ai_infoversion = 1;
|
|
aip->ai_acline = (sc->bios.r.ebx >> 8) & 0xff;
|
|
aip->ai_batt_stat = sc->bios.r.ebx & 0xff;
|
|
aip->ai_batt_life = sc->bios.r.ecx & 0xff;
|
|
aip->ai_major = (u_int)sc->majorversion;
|
|
aip->ai_minor = (u_int)sc->minorversion;
|
|
aip->ai_status = (u_int)sc->active;
|
|
sc->bios.r.edx &= 0xffff;
|
|
if (sc->bios.r.edx == 0xffff) /* Time is unknown */
|
|
aip->ai_batt_time = -1;
|
|
else if (sc->bios.r.edx & 0x8000) /* Time is in minutes */
|
|
aip->ai_batt_time = (sc->bios.r.edx & 0x7fff) * 60;
|
|
else /* Time is in seconds */
|
|
aip->ai_batt_time = sc->bios.r.edx;
|
|
|
|
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETCAPABILITIES;
|
|
sc->bios.r.ebx = 0;
|
|
sc->bios.r.ecx = 0;
|
|
sc->bios.r.edx = 0;
|
|
if (apm_bioscall()) {
|
|
aip->ai_batteries = -1; /* Unknown */
|
|
aip->ai_capabilities = 0xff00; /* Unknown, with no bits set */
|
|
} else {
|
|
aip->ai_batteries = sc->bios.r.ebx & 0xff;
|
|
aip->ai_capabilities = sc->bios.r.ecx & 0xf;
|
|
}
|
|
|
|
bzero(aip->ai_spare, sizeof aip->ai_spare);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* inform APM BIOS that CPU is idle */
|
|
void
|
|
apm_cpu_idle(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (sc->active) {
|
|
|
|
sc->bios.r.eax = (APM_BIOS <<8) | APM_CPUIDLE;
|
|
sc->bios.r.edx = sc->bios.r.ecx = sc->bios.r.ebx = 0;
|
|
(void) apm_bioscall();
|
|
}
|
|
/*
|
|
* Some APM implementation halts CPU in BIOS, whenever
|
|
* "CPU-idle" function are invoked, but swtch() of
|
|
* FreeBSD halts CPU, therefore, CPU is halted twice
|
|
* in the sched loop. It makes the interrupt latency
|
|
* terribly long and be able to cause a serious problem
|
|
* in interrupt processing. We prevent it by removing
|
|
* "hlt" operation from swtch() and managed it under
|
|
* APM driver.
|
|
*/
|
|
if (!sc->active || sc->always_halt_cpu)
|
|
__asm("hlt"); /* wait for interrupt */
|
|
}
|
|
|
|
/* inform APM BIOS that CPU is busy */
|
|
void
|
|
apm_cpu_busy(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
/*
|
|
* The APM specification says this is only necessary if your BIOS
|
|
* slows down the processor in the idle task, otherwise it's not
|
|
* necessary.
|
|
*/
|
|
if (sc->slow_idle_cpu && sc->active) {
|
|
|
|
sc->bios.r.eax = (APM_BIOS <<8) | APM_CPUBUSY;
|
|
sc->bios.r.edx = sc->bios.r.ecx = sc->bios.r.ebx = 0;
|
|
apm_bioscall();
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* APM timeout routine:
|
|
*
|
|
* This routine is automatically called by timer once per second.
|
|
*/
|
|
|
|
static void
|
|
apm_timeout(void *dummy)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (apm_op_inprog)
|
|
apm_lastreq_notify();
|
|
|
|
if (sc->standbys && sc->standby_countdown-- <= 0)
|
|
apm_do_standby();
|
|
|
|
if (sc->suspends && sc->suspend_countdown-- <= 0)
|
|
apm_do_suspend();
|
|
|
|
if (!sc->bios_busy)
|
|
apm_processevent();
|
|
|
|
if (sc->active == 1)
|
|
/* Run slightly more oftan than 1 Hz */
|
|
apm_timeout_ch = timeout(apm_timeout, NULL, hz - 1 );
|
|
}
|
|
|
|
/* enable APM BIOS */
|
|
static void
|
|
apm_event_enable(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
#ifdef APM_DEBUG
|
|
printf("called apm_event_enable()\n");
|
|
#endif
|
|
if (sc->initialized) {
|
|
sc->active = 1;
|
|
apm_timeout(sc);
|
|
}
|
|
}
|
|
|
|
/* disable APM BIOS */
|
|
static void
|
|
apm_event_disable(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
#ifdef APM_DEBUG
|
|
printf("called apm_event_disable()\n");
|
|
#endif
|
|
if (sc->initialized) {
|
|
untimeout(apm_timeout, NULL, apm_timeout_ch);
|
|
sc->active = 0;
|
|
}
|
|
}
|
|
|
|
/* halt CPU in scheduling loop */
|
|
static void
|
|
apm_halt_cpu(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (sc->initialized)
|
|
sc->always_halt_cpu = 1;
|
|
}
|
|
|
|
/* don't halt CPU in scheduling loop */
|
|
static void
|
|
apm_not_halt_cpu(void)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
if (sc->initialized)
|
|
sc->always_halt_cpu = 0;
|
|
}
|
|
|
|
/* device driver definitions */
|
|
|
|
/*
|
|
* Create "connection point"
|
|
*/
|
|
static void
|
|
apm_identify(driver_t *driver, device_t parent)
|
|
{
|
|
device_t child;
|
|
|
|
child = BUS_ADD_CHILD(parent, 0, "apm", 0);
|
|
if (child == NULL)
|
|
panic("apm_identify");
|
|
}
|
|
|
|
/*
|
|
* probe for APM BIOS
|
|
*/
|
|
static int
|
|
apm_probe(device_t dev)
|
|
{
|
|
#define APM_KERNBASE KERNBASE
|
|
struct vm86frame vmf;
|
|
struct apm_softc *sc = &apm_softc;
|
|
int disabled, flags;
|
|
|
|
if (resource_int_value("apm", 0, "disabled", &disabled) == 0
|
|
&& disabled != 0)
|
|
return ENXIO;
|
|
|
|
device_set_desc(dev, "APM BIOS");
|
|
|
|
if ( device_get_unit(dev) > 0 ) {
|
|
printf("apm: Only one APM driver supported.\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
if (resource_int_value("apm", 0, "flags", &flags) != 0)
|
|
flags = 0;
|
|
|
|
bzero(&vmf, sizeof(struct vm86frame)); /* safety */
|
|
bzero(&apm_softc, sizeof(apm_softc));
|
|
vmf.vmf_ah = APM_BIOS;
|
|
vmf.vmf_al = APM_INSTCHECK;
|
|
vmf.vmf_bx = 0;
|
|
if (vm86_intcall(APM_INT, &vmf))
|
|
return ENXIO; /* APM not found */
|
|
if (vmf.vmf_bx != 0x504d) {
|
|
printf("apm: incorrect signature (0x%x)\n", vmf.vmf_bx);
|
|
return ENXIO;
|
|
}
|
|
if ((vmf.vmf_cx & (APM_32BIT_SUPPORT | APM_16BIT_SUPPORT)) == 0) {
|
|
printf("apm: protected mode connections are not supported\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
apm_version = vmf.vmf_ax;
|
|
sc->slow_idle_cpu = ((vmf.vmf_cx & APM_CPUIDLE_SLOW) != 0);
|
|
sc->disabled = ((vmf.vmf_cx & APM_DISABLED) != 0);
|
|
sc->disengaged = ((vmf.vmf_cx & APM_DISENGAGED) != 0);
|
|
|
|
vmf.vmf_ah = APM_BIOS;
|
|
vmf.vmf_al = APM_DISCONNECT;
|
|
vmf.vmf_bx = 0;
|
|
vm86_intcall(APM_INT, &vmf); /* disconnect, just in case */
|
|
|
|
if ((vmf.vmf_cx & APM_32BIT_SUPPORT) != 0) {
|
|
vmf.vmf_ah = APM_BIOS;
|
|
vmf.vmf_al = APM_PROT32CONNECT;
|
|
vmf.vmf_bx = 0;
|
|
if (vm86_intcall(APM_INT, &vmf)) {
|
|
printf("apm: 32-bit connection error.\n");
|
|
return (ENXIO);
|
|
}
|
|
sc->bios.seg.code32.base = (vmf.vmf_ax << 4) + APM_KERNBASE;
|
|
sc->bios.seg.code32.limit = 0xffff;
|
|
sc->bios.seg.code16.base = (vmf.vmf_cx << 4) + APM_KERNBASE;
|
|
sc->bios.seg.code16.limit = 0xffff;
|
|
sc->bios.seg.data.base = (vmf.vmf_dx << 4) + APM_KERNBASE;
|
|
sc->bios.seg.data.limit = 0xffff;
|
|
sc->bios.entry = vmf.vmf_ebx;
|
|
sc->connectmode = APM_PROT32CONNECT;
|
|
} else {
|
|
/* use 16-bit connection */
|
|
vmf.vmf_ah = APM_BIOS;
|
|
vmf.vmf_al = APM_PROT16CONNECT;
|
|
vmf.vmf_bx = 0;
|
|
if (vm86_intcall(APM_INT, &vmf)) {
|
|
printf("apm: 16-bit connection error.\n");
|
|
return (ENXIO);
|
|
}
|
|
sc->bios.seg.code16.base = (vmf.vmf_ax << 4) + APM_KERNBASE;
|
|
sc->bios.seg.code16.limit = 0xffff;
|
|
sc->bios.seg.data.base = (vmf.vmf_cx << 4) + APM_KERNBASE;
|
|
sc->bios.seg.data.limit = 0xffff;
|
|
sc->bios.entry = vmf.vmf_bx;
|
|
sc->connectmode = APM_PROT16CONNECT;
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* return 0 if the user will notice and handle the event,
|
|
* return 1 if the kernel driver should do so.
|
|
*/
|
|
static int
|
|
apm_record_event(struct apm_softc *sc, u_int event_type)
|
|
{
|
|
struct apm_event_info *evp;
|
|
|
|
if ((sc->sc_flags & SCFLAG_OPEN) == 0)
|
|
return 1; /* no user waiting */
|
|
if (sc->event_count == APM_NEVENTS)
|
|
return 1; /* overflow */
|
|
if (sc->event_filter[event_type] == 0)
|
|
return 1; /* not registered */
|
|
evp = &sc->event_list[sc->event_ptr];
|
|
sc->event_count++;
|
|
sc->event_ptr++;
|
|
sc->event_ptr %= APM_NEVENTS;
|
|
evp->type = event_type;
|
|
evp->index = ++apm_evindex;
|
|
selwakeup(&sc->sc_rsel);
|
|
return (sc->sc_flags & SCFLAG_OCTL) ? 0 : 1; /* user may handle */
|
|
}
|
|
|
|
/* Process APM event */
|
|
static void
|
|
apm_processevent(void)
|
|
{
|
|
int apm_event;
|
|
struct apm_softc *sc = &apm_softc;
|
|
|
|
#ifdef APM_DEBUG
|
|
# define OPMEV_DEBUGMESSAGE(symbol) case symbol: \
|
|
printf("Received APM Event: " #symbol "\n");
|
|
#else
|
|
# define OPMEV_DEBUGMESSAGE(symbol) case symbol:
|
|
#endif
|
|
do {
|
|
apm_event = apm_getevent();
|
|
switch (apm_event) {
|
|
OPMEV_DEBUGMESSAGE(PMEV_STANDBYREQ);
|
|
if (apm_op_inprog == 0) {
|
|
apm_op_inprog++;
|
|
if (apm_record_event(sc, apm_event)) {
|
|
apm_suspend(PMST_STANDBY);
|
|
}
|
|
}
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_USERSTANDBYREQ);
|
|
if (apm_op_inprog == 0) {
|
|
apm_op_inprog++;
|
|
if (apm_record_event(sc, apm_event)) {
|
|
apm_suspend(PMST_STANDBY);
|
|
}
|
|
}
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_SUSPENDREQ);
|
|
apm_lastreq_notify();
|
|
if (apm_op_inprog == 0) {
|
|
apm_op_inprog++;
|
|
if (apm_record_event(sc, apm_event)) {
|
|
apm_do_suspend();
|
|
}
|
|
}
|
|
return; /* XXX skip the rest */
|
|
OPMEV_DEBUGMESSAGE(PMEV_USERSUSPENDREQ);
|
|
apm_lastreq_notify();
|
|
if (apm_op_inprog == 0) {
|
|
apm_op_inprog++;
|
|
if (apm_record_event(sc, apm_event)) {
|
|
apm_do_suspend();
|
|
}
|
|
}
|
|
return; /* XXX skip the rest */
|
|
OPMEV_DEBUGMESSAGE(PMEV_CRITSUSPEND);
|
|
apm_do_suspend();
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_NORMRESUME);
|
|
apm_record_event(sc, apm_event);
|
|
apm_resume();
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_CRITRESUME);
|
|
apm_record_event(sc, apm_event);
|
|
apm_resume();
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_STANDBYRESUME);
|
|
apm_record_event(sc, apm_event);
|
|
apm_resume();
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_BATTERYLOW);
|
|
if (apm_record_event(sc, apm_event)) {
|
|
apm_battery_low();
|
|
apm_suspend(PMST_SUSPEND);
|
|
}
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_POWERSTATECHANGE);
|
|
apm_record_event(sc, apm_event);
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_UPDATETIME);
|
|
apm_record_event(sc, apm_event);
|
|
inittodr(0); /* adjust time to RTC */
|
|
break;
|
|
OPMEV_DEBUGMESSAGE(PMEV_CAPABILITIESCHANGE);
|
|
apm_record_event(sc, apm_event);
|
|
break;
|
|
case PMEV_NOEVENT:
|
|
break;
|
|
default:
|
|
printf("Unknown Original APM Event 0x%x\n", apm_event);
|
|
break;
|
|
}
|
|
} while (apm_event != PMEV_NOEVENT);
|
|
}
|
|
|
|
/*
|
|
* Attach APM:
|
|
*
|
|
* Initialize APM driver
|
|
*/
|
|
|
|
static int
|
|
apm_attach(device_t dev)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int flags;
|
|
int drv_version;
|
|
|
|
if (resource_int_value("apm", 0, "flags", &flags) != 0)
|
|
flags = 0;
|
|
|
|
if (flags & 0x20)
|
|
statclock_disable = 1;
|
|
|
|
sc->initialized = 0;
|
|
|
|
/* Must be externally enabled */
|
|
sc->active = 0;
|
|
|
|
/* Always call HLT in idle loop */
|
|
sc->always_halt_cpu = 1;
|
|
|
|
/* print bootstrap messages */
|
|
#ifdef APM_DEBUG
|
|
printf("apm: APM BIOS version %04x\n", apm_version);
|
|
printf("apm: Code16 0x%08x, Data 0x%08x\n",
|
|
sc->bios.seg.code16.base, sc->bios.seg.data.base);
|
|
printf("apm: Code entry 0x%08x, Idling CPU %s, Management %s\n",
|
|
sc->bios.entry, is_enabled(sc->slow_idle_cpu),
|
|
is_enabled(!sc->disabled));
|
|
printf("apm: CS_limit=0x%x, DS_limit=0x%x\n",
|
|
sc->bios.seg.code16.limit, sc->bios.seg.data.limit);
|
|
#endif /* APM_DEBUG */
|
|
|
|
#if 0
|
|
/*
|
|
* XXX this may not be needed anymore
|
|
*/
|
|
if ((flags & 0x10)) {
|
|
if ((flags & 0xf) >= 0x2) {
|
|
apm_driver_version(0x102);
|
|
}
|
|
if (!apm_version && (flags & 0xf) >= 0x1) {
|
|
apm_driver_version(0x101);
|
|
}
|
|
} else {
|
|
apm_driver_version(0x102);
|
|
if (!apm_version)
|
|
apm_driver_version(0x101);
|
|
}
|
|
#endif
|
|
/*
|
|
* In one test, apm bios version was 1.02; an attempt to register
|
|
* a 1.04 driver resulted in a 1.00 connection! Registering a
|
|
* 1.02 driver resulted in a 1.02 connection.
|
|
*/
|
|
drv_version = apm_version > 0x102 ? 0x102 : apm_version;
|
|
for (; drv_version > 0x100; drv_version--)
|
|
if (apm_driver_version(drv_version) == 0)
|
|
break;
|
|
sc->minorversion = ((drv_version & 0x00f0) >> 4) * 10 +
|
|
((drv_version & 0x000f) >> 0);
|
|
sc->majorversion = ((drv_version & 0xf000) >> 12) * 10 +
|
|
((apm_version & 0x0f00) >> 8);
|
|
|
|
sc->intversion = INTVERSION(sc->majorversion, sc->minorversion);
|
|
|
|
#ifdef APM_DEBUG
|
|
if (sc->intversion >= INTVERSION(1, 1))
|
|
printf("apm: Engaged control %s\n", is_enabled(!sc->disengaged));
|
|
#endif
|
|
|
|
printf("apm: found APM BIOS v%ld.%ld, connected at v%d.%d\n",
|
|
((apm_version & 0xf000) >> 12) * 10 + ((apm_version & 0x0f00) >> 8),
|
|
((apm_version & 0x00f0) >> 4) * 10 + ((apm_version & 0x000f) >> 0),
|
|
sc->majorversion, sc->minorversion);
|
|
|
|
#ifdef APM_DEBUG
|
|
printf("apm: Slow Idling CPU %s\n", is_enabled(sc->slow_idle_cpu));
|
|
#endif
|
|
|
|
/* enable power management */
|
|
if (sc->disabled) {
|
|
if (apm_enable_disable_pm(1)) {
|
|
#ifdef APM_DEBUG
|
|
printf("apm: *Warning* enable function failed! [%x]\n",
|
|
(sc->bios.r.eax >> 8) & 0xff);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/* engage power managment (APM 1.1 or later) */
|
|
if (sc->intversion >= INTVERSION(1, 1) && sc->disengaged) {
|
|
if (apm_engage_disengage_pm(1)) {
|
|
#ifdef APM_DEBUG
|
|
printf("apm: *Warning* engage function failed err=[%x]",
|
|
(sc->bios.r.eax >> 8) & 0xff);
|
|
printf(" (Docked or using external power?).\n");
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/* default suspend hook */
|
|
sc->sc_suspend.ah_fun = apm_default_suspend;
|
|
sc->sc_suspend.ah_arg = sc;
|
|
sc->sc_suspend.ah_name = "default suspend";
|
|
sc->sc_suspend.ah_order = APM_MAX_ORDER;
|
|
|
|
/* default resume hook */
|
|
sc->sc_resume.ah_fun = apm_default_resume;
|
|
sc->sc_resume.ah_arg = sc;
|
|
sc->sc_resume.ah_name = "default resume";
|
|
sc->sc_resume.ah_order = APM_MIN_ORDER;
|
|
|
|
apm_hook_establish(APM_HOOK_SUSPEND, &sc->sc_suspend);
|
|
apm_hook_establish(APM_HOOK_RESUME , &sc->sc_resume);
|
|
|
|
/* Power the system off using APM */
|
|
EVENTHANDLER_REGISTER(shutdown_final, apm_power_off, NULL,
|
|
SHUTDOWN_PRI_LAST);
|
|
|
|
sc->initialized = 1;
|
|
|
|
make_dev(&apm_cdevsw, 0, 0, 5, 0660, "apm");
|
|
make_dev(&apm_cdevsw, 8, 0, 5, 0660, "apmctl");
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
apmopen(dev_t dev, int flag, int fmt, struct proc *p)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int ctl = APMDEV(dev);
|
|
|
|
if (!sc->initialized)
|
|
return (ENXIO);
|
|
|
|
switch (ctl) {
|
|
case APMDEV_CTL:
|
|
if (!(flag & FWRITE))
|
|
return EINVAL;
|
|
if (sc->sc_flags & SCFLAG_OCTL)
|
|
return EBUSY;
|
|
sc->sc_flags |= SCFLAG_OCTL;
|
|
bzero(sc->event_filter, sizeof sc->event_filter);
|
|
break;
|
|
case APMDEV_NORMAL:
|
|
sc->sc_flags |= SCFLAG_ONORMAL;
|
|
break;
|
|
default:
|
|
return ENXIO;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
apmclose(dev_t dev, int flag, int fmt, struct proc *p)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int ctl = APMDEV(dev);
|
|
|
|
switch (ctl) {
|
|
case APMDEV_CTL:
|
|
apm_lastreq_rejected();
|
|
sc->sc_flags &= ~SCFLAG_OCTL;
|
|
bzero(sc->event_filter, sizeof sc->event_filter);
|
|
break;
|
|
case APMDEV_NORMAL:
|
|
sc->sc_flags &= ~SCFLAG_ONORMAL;
|
|
break;
|
|
}
|
|
if ((sc->sc_flags & SCFLAG_OPEN) == 0) {
|
|
sc->event_count = 0;
|
|
sc->event_ptr = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
apmioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
struct apm_bios_arg *args;
|
|
int error = 0;
|
|
int ret;
|
|
int newstate;
|
|
|
|
if (!sc->initialized)
|
|
return (ENXIO);
|
|
#ifdef APM_DEBUG
|
|
printf("APM ioctl: cmd = 0x%x\n", cmd);
|
|
#endif
|
|
switch (cmd) {
|
|
case APMIO_SUSPEND:
|
|
if (sc->active)
|
|
apm_suspend(PMST_SUSPEND);
|
|
else
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case APMIO_STANDBY:
|
|
if (sc->active)
|
|
apm_suspend(PMST_STANDBY);
|
|
else
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case APMIO_GETINFO_OLD:
|
|
{
|
|
struct apm_info info;
|
|
apm_info_old_t aiop;
|
|
|
|
if (apm_get_info(&info))
|
|
error = ENXIO;
|
|
aiop = (apm_info_old_t)addr;
|
|
aiop->ai_major = info.ai_major;
|
|
aiop->ai_minor = info.ai_minor;
|
|
aiop->ai_acline = info.ai_acline;
|
|
aiop->ai_batt_stat = info.ai_batt_stat;
|
|
aiop->ai_batt_life = info.ai_batt_life;
|
|
aiop->ai_status = info.ai_status;
|
|
}
|
|
break;
|
|
case APMIO_GETINFO:
|
|
if (apm_get_info((apm_info_t)addr))
|
|
error = ENXIO;
|
|
break;
|
|
case APMIO_ENABLE:
|
|
apm_event_enable();
|
|
break;
|
|
case APMIO_DISABLE:
|
|
apm_event_disable();
|
|
break;
|
|
case APMIO_HALTCPU:
|
|
apm_halt_cpu();
|
|
break;
|
|
case APMIO_NOTHALTCPU:
|
|
apm_not_halt_cpu();
|
|
break;
|
|
case APMIO_DISPLAY:
|
|
newstate = *(int *)addr;
|
|
if (apm_display(newstate))
|
|
error = ENXIO;
|
|
break;
|
|
case APMIO_BIOS:
|
|
/* XXX compatibility with the old interface */
|
|
args = (struct apm_bios_arg *)addr;
|
|
sc->bios.r.eax = args->eax;
|
|
sc->bios.r.ebx = args->ebx;
|
|
sc->bios.r.ecx = args->ecx;
|
|
sc->bios.r.edx = args->edx;
|
|
sc->bios.r.esi = args->esi;
|
|
sc->bios.r.edi = args->edi;
|
|
if ((ret = apm_bioscall())) {
|
|
/*
|
|
* Return code 1 means bios call was unsuccessful.
|
|
* Error code is stored in %ah.
|
|
* Return code -1 means bios call was unsupported
|
|
* in the APM BIOS version.
|
|
*/
|
|
if (ret == -1) {
|
|
error = EINVAL;
|
|
}
|
|
} else {
|
|
/*
|
|
* Return code 0 means bios call was successful.
|
|
* We need only %al and can discard %ah.
|
|
*/
|
|
sc->bios.r.eax &= 0xff;
|
|
}
|
|
args->eax = sc->bios.r.eax;
|
|
args->ebx = sc->bios.r.ebx;
|
|
args->ecx = sc->bios.r.ecx;
|
|
args->edx = sc->bios.r.edx;
|
|
args->esi = sc->bios.r.esi;
|
|
args->edi = sc->bios.r.edi;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
/* for /dev/apmctl */
|
|
if (APMDEV(dev) == APMDEV_CTL) {
|
|
struct apm_event_info *evp;
|
|
int i;
|
|
|
|
error = 0;
|
|
switch (cmd) {
|
|
case APMIO_NEXTEVENT:
|
|
if (!sc->event_count) {
|
|
error = EAGAIN;
|
|
} else {
|
|
evp = (struct apm_event_info *)addr;
|
|
i = sc->event_ptr + APM_NEVENTS - sc->event_count;
|
|
i %= APM_NEVENTS;
|
|
*evp = sc->event_list[i];
|
|
sc->event_count--;
|
|
}
|
|
break;
|
|
case APMIO_REJECTLASTREQ:
|
|
if (apm_lastreq_rejected()) {
|
|
error = EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
apmwrite(dev_t dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
u_int event_type;
|
|
int error;
|
|
u_char enabled;
|
|
|
|
if (APMDEV(dev) != APMDEV_CTL)
|
|
return(ENODEV);
|
|
if (uio->uio_resid != sizeof(u_int))
|
|
return(E2BIG);
|
|
|
|
if ((error = uiomove((caddr_t)&event_type, sizeof(u_int), uio)))
|
|
return(error);
|
|
|
|
if (event_type < 0 || event_type >= APM_NPMEV)
|
|
return(EINVAL);
|
|
|
|
if (sc->event_filter[event_type] == 0) {
|
|
enabled = 1;
|
|
} else {
|
|
enabled = 0;
|
|
}
|
|
sc->event_filter[event_type] = enabled;
|
|
#ifdef APM_DEBUG
|
|
printf("apmwrite: event 0x%x %s\n", event_type, is_enabled(enabled));
|
|
#endif
|
|
|
|
return uio->uio_resid;
|
|
}
|
|
|
|
static int
|
|
apmpoll(dev_t dev, int events, struct proc *p)
|
|
{
|
|
struct apm_softc *sc = &apm_softc;
|
|
int revents = 0;
|
|
|
|
if (events & (POLLIN | POLLRDNORM)) {
|
|
if (sc->event_count) {
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
} else {
|
|
selrecord(p, &sc->sc_rsel);
|
|
}
|
|
}
|
|
|
|
return (revents);
|
|
}
|
|
|
|
static device_method_t apm_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, apm_identify),
|
|
DEVMETHOD(device_probe, apm_probe),
|
|
DEVMETHOD(device_attach, apm_attach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t apm_driver = {
|
|
"apm",
|
|
apm_methods,
|
|
1, /* no softc (XXX) */
|
|
};
|
|
|
|
static devclass_t apm_devclass;
|
|
|
|
DEV_DRIVER_MODULE(apm, nexus, apm_driver, apm_devclass, apm_cdevsw, 0, 0);
|