freebsd-dev/sys/dev/mmc/mmcvar.h
Marius Strobl 7aa6584632 o Fixes:
- When switching to 4-bit operation, send a SET_CLR_CARD_DETECT command
    to disconnect the card-detect pull-up resistor from the DAT3 line before
    sending the SET_BUS_WIDTH command.
  - Add the missing "reserved" zero entry to the mantissa table used to
    decode various CSD fields. This was causing SD cards to report that they
    could run at 30 MHz instead of the maximum 25 MHz mandated in the spec.
o Enhancements:
  - At the MMC layer, format various info from the CID into a string that
    uniquely identifies the card instance (manufacturer number, serial
    number, product name and revision, etc). Export it as an instance
    variable.
  - At the MMCSD layer, display the formatted card ID string, and also
    report the clock speed of the hardware (not the card's max speed), and
    the number of bits and number of blocks per transfer. It comes out like
    this now:
    mmcsd0: 968MB <SD SD01G 8.0 SN 276886905 MFG 08/2008 by 3 SD> at mmc0
    22.5MHz/4bit/128-block
o Use DEVMETHOD_END.
o Use NULL instead of 0 for pointers.

PR:		156496
Submitted by:	Ian Lepore
MFC after:	1 week
2012-04-21 01:51:16 +00:00

95 lines
4.0 KiB
C

/*-
* Copyright (c) 2006 Bernd Walter. All rights reserved.
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Portions of this software may have been developed with reference to
* the SD Simplified Specification. The following disclaimer may apply:
*
* The following conditions apply to the release of the simplified
* specification ("Simplified Specification") by the SD Card Association and
* the SD Group. The Simplified Specification is a subset of the complete SD
* Specification which is owned by the SD Card Association and the SD
* Group. This Simplified Specification is provided on a non-confidential
* basis subject to the disclaimers below. Any implementation of the
* Simplified Specification may require a license from the SD Card
* Association, SD Group, SD-3C LLC or other third parties.
*
* Disclaimers:
*
* The information contained in the Simplified Specification is presented only
* as a standard specification for SD Cards and SD Host/Ancillary products and
* is provided "AS-IS" without any representations or warranties of any
* kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD
* Card Association for any damages, any infringements of patents or other
* right of the SD Group, SD-3C LLC, the SD Card Association or any third
* parties, which may result from its use. No license is granted by
* implication, estoppel or otherwise under any patent or other rights of the
* SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing
* herein shall be construed as an obligation by the SD Group, the SD-3C LLC
* or the SD Card Association to disclose or distribute any technical
* information, know-how or other confidential information to any third party.
*
* "$FreeBSD$"
*/
#ifndef DEV_MMC_MMCVAR_H
#define DEV_MMC_MMCVAR_H
#include <dev/mmc/bridge.h>
enum mmc_device_ivars {
MMC_IVAR_DSR_IMP,
MMC_IVAR_MEDIA_SIZE,
MMC_IVAR_RCA,
MMC_IVAR_SECTOR_SIZE,
MMC_IVAR_TRAN_SPEED,
MMC_IVAR_READ_ONLY,
MMC_IVAR_HIGH_CAP,
MMC_IVAR_CARD_TYPE,
MMC_IVAR_BUS_WIDTH,
MMC_IVAR_ERASE_SECTOR,
MMC_IVAR_MAX_DATA,
MMC_IVAR_CARD_ID_STRING
};
/*
* Simplified accessors for pci devices
*/
#define MMC_ACCESSOR(var, ivar, type) \
__BUS_ACCESSOR(mmc, var, MMC, ivar, type)
MMC_ACCESSOR(dsr_imp, DSR_IMP, int)
MMC_ACCESSOR(media_size, MEDIA_SIZE, long)
MMC_ACCESSOR(rca, RCA, int)
MMC_ACCESSOR(sector_size, SECTOR_SIZE, int)
MMC_ACCESSOR(tran_speed, TRAN_SPEED, int)
MMC_ACCESSOR(read_only, READ_ONLY, int)
MMC_ACCESSOR(high_cap, HIGH_CAP, int)
MMC_ACCESSOR(card_type, CARD_TYPE, int)
MMC_ACCESSOR(bus_width, BUS_WIDTH, int)
MMC_ACCESSOR(erase_sector, ERASE_SECTOR, int)
MMC_ACCESSOR(max_data, MAX_DATA, int)
MMC_ACCESSOR(card_id_string, CARD_ID_STRING, const char *)
#endif /* DEV_MMC_MMCVAR_H */