..
ath_dfs /null
Disable strong signal diversity when enabling radar pulse detection
2012-09-02 05:01:10 +00:00
ath_hal
Add the initial HAL glue for the spectral analysis support.
2012-12-30 06:48:12 +00:00
ath_rate
I've had some feedback that CCK rates are more reliable than MCS 0
2012-10-31 06:35:50 +00:00
ah_osdep.c
Fix the HAL debugging to only use one bit to mark a message as unmaskable.
2012-07-01 02:34:32 +00:00
ah_osdep.h
Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.
2012-08-05 10:12:27 +00:00
if_ath_ahb.c
I give up - introduce a TX lock to serialise TX operations.
2012-10-31 06:27:58 +00:00
if_ath_alq.c
ath(4) ALQ logging improvements.
2012-11-16 19:39:29 +00:00
if_ath_alq.h
Add in specific TDMA logging types.
2012-11-27 02:24:05 +00:00
if_ath_beacon.c
Delete the per-TXQ locks and replace them with a single TX lock.
2012-12-02 06:24:08 +00:00
if_ath_beacon.h
Extend the beacon code slightly to support AP mode beaconing for the
2012-08-11 23:26:19 +00:00
if_ath_debug.c
TX EDMA debugging fixes:
2012-11-05 07:08:45 +00:00
if_ath_debug.h
Add a debug method to dump the EDMA TX status descriptor contents out.
2012-11-03 04:53:44 +00:00
if_ath_keycache.c
Don't allocate or program a key for the AR5210.
2012-11-19 23:54:05 +00:00
if_ath_keycache.h
Add a 'vap' to ath_keyset().
2011-11-08 19:25:52 +00:00
if_ath_led.c
Bring over the initial 802.11n bluetooth coexistence support code.
2012-06-26 22:16:53 +00:00
if_ath_led.h
Refactor out the software LED config code into a common function, called
2011-12-26 05:46:22 +00:00
if_ath_misc.h
I give up - introduce a TX lock to serialise TX operations.
2012-10-31 06:27:58 +00:00
if_ath_pci.c
I give up - introduce a TX lock to serialise TX operations.
2012-10-31 06:27:58 +00:00
if_ath_rx_edma.c
Mechanically substitute flags from historic mbuf allocator with
2012-12-04 09:32:43 +00:00
if_ath_rx_edma.h
Begin abstracting out the RX path in preparation for RX EDMA support.
2012-07-03 06:59:12 +00:00
if_ath_rx.c
Mechanically substitute flags from historic mbuf allocator with
2012-12-04 09:32:43 +00:00
if_ath_rx.h
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.
2012-07-10 00:02:19 +00:00
if_ath_sysctl.c
Place 'dev.ath.X.debug' back under ATH_DEBUG, rather than ATH_DEBUG_ALQ.
2012-11-13 19:45:13 +00:00
if_ath_sysctl.h
Break out most of the HAL related tweaks into a per-HAL instance,
2011-06-23 02:38:36 +00:00
if_ath_tdma.c
Pull out the debugging code from the critical path and make sure it
2012-11-28 01:55:22 +00:00
if_ath_tdma.h
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tsf.h
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].
2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c
Delete the per-TXQ locks and replace them with a single TX lock.
2012-12-02 06:24:08 +00:00
if_ath_tx_edma.h
Begin separating out the TX DMA setup in preparation for TX EDMA support.
2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c
Delete the per-TXQ locks and replace them with a single TX lock.
2012-12-02 06:24:08 +00:00
if_ath_tx_ht.h
Introduce TX aggregation and software TX queue management
2011-11-08 22:43:13 +00:00
if_ath_tx.c
There's no need to use a TXQ pointer here; we specifically need the
2012-12-11 04:19:51 +00:00
if_ath_tx.h
ALQ logging enhancements:
2012-11-16 19:57:16 +00:00
if_ath.c
Fix typo in comment.
2012-12-28 21:59:47 +00:00
if_athdfs.h
Change the ath_dfs_process_phy_err() method to take an mbuf rather than
2012-06-24 08:09:06 +00:00
if_athioctl.h
Implement my first cut at filtered frames in aggregation sessions.
2012-09-18 10:14:17 +00:00
if_athrate.h
Create an ioctl API for fetching the current rate control information.
2012-07-20 01:27:20 +00:00
if_athvar.h
There's no need to use a TXQ pointer here; we specifically need the
2012-12-11 04:19:51 +00:00
29dbc48349