2a508645b4
Some early PCIe chipsets are explicitly listed in the white-list to enable use of the MMIO config space accesses, perhaps because ACPI tables were not reliable source of the base MCFG address at that time. For that chipsets, MCFG base was read from the known chipset MCFGbase config register. During very early stage of boot, when access to the PCI config space is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of registers because the method used with pre-boot pmap overflows initial kernel page tables. Move fallback to read MCFGbase to the attachment method of the x86/legacy device, which removes code duplication, and results in the use of io accesses until MCFG is parsed or legacy attach called. For amd64, pre-initialize cfgmech with CFGMECH_1, right now we dynamically assign CFGMECH_1 to it anyway, and remove checks for CFGMECH_NONE. There is a mention in the Intel documentation for corresponding chipsets that OS must use either io port or MMIO access method, but we already break this rule by reading MCFGbase register, so one more access seems to be innocent. Reported by: longwitz@incore.de PR: 236838 Reviewed by: avg (other version), jhb Sponsored by: The FreeBSD Foundation MFC after: 1 week Differential revision: https://reviews.freebsd.org/D19833
330 lines
8.6 KiB
C
330 lines
8.6 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
|
|
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
|
|
* Copyright (c) 2000, BSDi
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sysctl.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/pci_cfgreg.h>
|
|
|
|
static uint32_t pci_docfgregread(int bus, int slot, int func, int reg,
|
|
int bytes);
|
|
static int pciereg_cfgread(int bus, unsigned slot, unsigned func,
|
|
unsigned reg, unsigned bytes);
|
|
static void pciereg_cfgwrite(int bus, unsigned slot, unsigned func,
|
|
unsigned reg, int data, unsigned bytes);
|
|
static int pcireg_cfgread(int bus, int slot, int func, int reg, int bytes);
|
|
static void pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes);
|
|
|
|
SYSCTL_DECL(_hw_pci);
|
|
|
|
/*
|
|
* For amd64 we assume that type 1 I/O port-based access always works.
|
|
* If an ACPI MCFG table exists, pcie_cfgregopen() will be called to
|
|
* switch to memory-mapped access.
|
|
*/
|
|
int cfgmech = CFGMECH_1;
|
|
|
|
static vm_offset_t pcie_base;
|
|
static int pcie_minbus, pcie_maxbus;
|
|
static uint32_t pcie_badslots;
|
|
static struct mtx pcicfg_mtx;
|
|
MTX_SYSINIT(pcicfg_mtx, &pcicfg_mtx, "pcicfg_mtx", MTX_SPIN);
|
|
static int mcfg_enable = 1;
|
|
SYSCTL_INT(_hw_pci, OID_AUTO, mcfg, CTLFLAG_RDTUN, &mcfg_enable, 0,
|
|
"Enable support for PCI-e memory mapped config access");
|
|
|
|
int
|
|
pci_cfgregopen(void)
|
|
{
|
|
|
|
return (1);
|
|
}
|
|
|
|
static uint32_t
|
|
pci_docfgregread(int bus, int slot, int func, int reg, int bytes)
|
|
{
|
|
|
|
if (cfgmech == CFGMECH_PCIE &&
|
|
(bus >= pcie_minbus && bus <= pcie_maxbus) &&
|
|
(bus != 0 || !(1 << slot & pcie_badslots)))
|
|
return (pciereg_cfgread(bus, slot, func, reg, bytes));
|
|
else
|
|
return (pcireg_cfgread(bus, slot, func, reg, bytes));
|
|
}
|
|
|
|
/*
|
|
* Read configuration space register
|
|
*/
|
|
u_int32_t
|
|
pci_cfgregread(int bus, int slot, int func, int reg, int bytes)
|
|
{
|
|
uint32_t line;
|
|
|
|
/*
|
|
* Some BIOS writers seem to want to ignore the spec and put
|
|
* 0 in the intline rather than 255 to indicate none. Some use
|
|
* numbers in the range 128-254 to indicate something strange and
|
|
* apparently undocumented anywhere. Assume these are completely bogus
|
|
* and map them to 255, which the rest of the PCI code recognizes as
|
|
* as an invalid IRQ.
|
|
*/
|
|
if (reg == PCIR_INTLINE && bytes == 1) {
|
|
line = pci_docfgregread(bus, slot, func, PCIR_INTLINE, 1);
|
|
if (line == 0 || line >= 128)
|
|
line = PCI_INVALID_IRQ;
|
|
return (line);
|
|
}
|
|
return (pci_docfgregread(bus, slot, func, reg, bytes));
|
|
}
|
|
|
|
/*
|
|
* Write configuration space register
|
|
*/
|
|
void
|
|
pci_cfgregwrite(int bus, int slot, int func, int reg, u_int32_t data, int bytes)
|
|
{
|
|
|
|
if (cfgmech == CFGMECH_PCIE &&
|
|
(bus >= pcie_minbus && bus <= pcie_maxbus) &&
|
|
(bus != 0 || !(1 << slot & pcie_badslots)))
|
|
pciereg_cfgwrite(bus, slot, func, reg, data, bytes);
|
|
else
|
|
pcireg_cfgwrite(bus, slot, func, reg, data, bytes);
|
|
}
|
|
|
|
/*
|
|
* Configuration space access using direct register operations
|
|
*/
|
|
|
|
/* enable configuration space accesses and return data port address */
|
|
static int
|
|
pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
|
|
{
|
|
int dataport = 0;
|
|
|
|
if (bus <= PCI_BUSMAX && slot <= PCI_SLOTMAX && func <= PCI_FUNCMAX &&
|
|
(unsigned)reg <= PCI_REGMAX && bytes != 3 &&
|
|
(unsigned)bytes <= 4 && (reg & (bytes - 1)) == 0) {
|
|
outl(CONF1_ADDR_PORT, (1U << 31) | (bus << 16) | (slot << 11)
|
|
| (func << 8) | (reg & ~0x03));
|
|
dataport = CONF1_DATA_PORT + (reg & 0x03);
|
|
}
|
|
return (dataport);
|
|
}
|
|
|
|
/* disable configuration space accesses */
|
|
static void
|
|
pci_cfgdisable(void)
|
|
{
|
|
|
|
/*
|
|
* Do nothing. Writing a 0 to the address port can apparently
|
|
* confuse some bridges and cause spurious access failures.
|
|
*/
|
|
}
|
|
|
|
static int
|
|
pcireg_cfgread(int bus, int slot, int func, int reg, int bytes)
|
|
{
|
|
int data = -1;
|
|
int port;
|
|
|
|
mtx_lock_spin(&pcicfg_mtx);
|
|
port = pci_cfgenable(bus, slot, func, reg, bytes);
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
data = inb(port);
|
|
break;
|
|
case 2:
|
|
data = inw(port);
|
|
break;
|
|
case 4:
|
|
data = inl(port);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
mtx_unlock_spin(&pcicfg_mtx);
|
|
return (data);
|
|
}
|
|
|
|
static void
|
|
pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes)
|
|
{
|
|
int port;
|
|
|
|
mtx_lock_spin(&pcicfg_mtx);
|
|
port = pci_cfgenable(bus, slot, func, reg, bytes);
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
outb(port, data);
|
|
break;
|
|
case 2:
|
|
outw(port, data);
|
|
break;
|
|
case 4:
|
|
outl(port, data);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
mtx_unlock_spin(&pcicfg_mtx);
|
|
}
|
|
|
|
int
|
|
pcie_cfgregopen(uint64_t base, uint8_t minbus, uint8_t maxbus)
|
|
{
|
|
uint32_t val1, val2;
|
|
int slot;
|
|
|
|
if (!mcfg_enable)
|
|
return (0);
|
|
|
|
if (minbus != 0)
|
|
return (0);
|
|
|
|
if (bootverbose)
|
|
printf("PCIe: Memory Mapped configuration base @ 0x%lx\n",
|
|
base);
|
|
|
|
/* XXX: We should make sure this really fits into the direct map. */
|
|
pcie_base = (vm_offset_t)pmap_mapdev_pciecfg(base, (maxbus + 1) << 20);
|
|
pcie_minbus = minbus;
|
|
pcie_maxbus = maxbus;
|
|
cfgmech = CFGMECH_PCIE;
|
|
|
|
/*
|
|
* On some AMD systems, some of the devices on bus 0 are
|
|
* inaccessible using memory-mapped PCI config access. Walk
|
|
* bus 0 looking for such devices. For these devices, we will
|
|
* fall back to using type 1 config access instead.
|
|
*/
|
|
if (pci_cfgregopen() != 0) {
|
|
for (slot = 0; slot <= PCI_SLOTMAX; slot++) {
|
|
val1 = pcireg_cfgread(0, slot, 0, 0, 4);
|
|
if (val1 == 0xffffffff)
|
|
continue;
|
|
|
|
val2 = pciereg_cfgread(0, slot, 0, 0, 4);
|
|
if (val2 != val1)
|
|
pcie_badslots |= (1 << slot);
|
|
}
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
#define PCIE_VADDR(base, reg, bus, slot, func) \
|
|
((base) + \
|
|
((((bus) & 0xff) << 20) | \
|
|
(((slot) & 0x1f) << 15) | \
|
|
(((func) & 0x7) << 12) | \
|
|
((reg) & 0xfff)))
|
|
|
|
/*
|
|
* AMD BIOS And Kernel Developer's Guides for CPU families starting with 10h
|
|
* have a requirement that all accesses to the memory mapped PCI configuration
|
|
* space are done using AX class of registers.
|
|
* Since other vendors do not currently have any contradicting requirements
|
|
* the AMD access pattern is applied universally.
|
|
*/
|
|
|
|
static int
|
|
pciereg_cfgread(int bus, unsigned slot, unsigned func, unsigned reg,
|
|
unsigned bytes)
|
|
{
|
|
vm_offset_t va;
|
|
int data = -1;
|
|
|
|
if (bus < pcie_minbus || bus > pcie_maxbus || slot > PCI_SLOTMAX ||
|
|
func > PCI_FUNCMAX || reg > PCIE_REGMAX)
|
|
return (-1);
|
|
|
|
va = PCIE_VADDR(pcie_base, reg, bus, slot, func);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
__asm("movl %1, %0" : "=a" (data)
|
|
: "m" (*(volatile uint32_t *)va));
|
|
break;
|
|
case 2:
|
|
__asm("movzwl %1, %0" : "=a" (data)
|
|
: "m" (*(volatile uint16_t *)va));
|
|
break;
|
|
case 1:
|
|
__asm("movzbl %1, %0" : "=a" (data)
|
|
: "m" (*(volatile uint8_t *)va));
|
|
break;
|
|
}
|
|
|
|
return (data);
|
|
}
|
|
|
|
static void
|
|
pciereg_cfgwrite(int bus, unsigned slot, unsigned func, unsigned reg, int data,
|
|
unsigned bytes)
|
|
{
|
|
vm_offset_t va;
|
|
|
|
if (bus < pcie_minbus || bus > pcie_maxbus || slot > PCI_SLOTMAX ||
|
|
func > PCI_FUNCMAX || reg > PCIE_REGMAX)
|
|
return;
|
|
|
|
va = PCIE_VADDR(pcie_base, reg, bus, slot, func);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
__asm("movl %1, %0" : "=m" (*(volatile uint32_t *)va)
|
|
: "a" (data));
|
|
break;
|
|
case 2:
|
|
__asm("movw %1, %0" : "=m" (*(volatile uint16_t *)va)
|
|
: "a" ((uint16_t)data));
|
|
break;
|
|
case 1:
|
|
__asm("movb %1, %0" : "=m" (*(volatile uint8_t *)va)
|
|
: "a" ((uint8_t)data));
|
|
break;
|
|
}
|
|
}
|