freebsd-dev/sys/dev/ata/atapi-fd.h
Søren Schmidt 8ca4df3299 This is the much rumoured ATA mkIII update that I've been working on.
o       ATA is now fully newbus'd and split into modules.
        This means that on a modern system you just load "atapci and ata"
        to get the base support, and then one or more of the device
        subdrivers "atadisk atapicd atapifd atapist ataraid".
        All can be loaded/unloaded anytime, but for obvious reasons you
        dont want to unload atadisk when you have mounted filesystems.

o       The device identify part of the probe has been rewritten to fix
        the problems with odd devices the old had, and to try to remove
        so of the long delays some HW could provoke. Also probing is done
	without the need for interrupts, making earlier probing possible.

o       SATA devices can be hot inserted/removed and devices will be created/
        removed in /dev accordingly.
	NOTE: only supported on controllers that has this feature:
	Promise and Silicon Image for now.
	On other controllers the usual atacontrol detach/attach dance is
	still needed.

o	Support for "atomic" composite ATA requests used for RAID.

o       ATA RAID support has been rewritten and and now supports these
        metadata formats:
                 "Adaptec HostRAID"
                 "Highpoint V2 RocketRAID"
                 "Highpoint V3 RocketRAID"
                 "Intel MatrixRAID"
                 "Integrated Technology Express"
                 "LSILogic V2 MegaRAID"
                 "LSILogic V3 MegaRAID"
                 "Promise FastTrak"
                 "Silicon Image Medley"
		 "FreeBSD PseudoRAID"

o       Update the ioctl API to match new RAID levels etc.

o       Update atacontrol to know about the new RAID levels etc
        NOTE: you need to recompile atacontrol with the new sys/ata.h,
        make world will take care of that.
	NOTE2: that rebuild is done differently from the old system as
	the rebuild is now done piggybacked on read requests to the
	array, so atacontrol simply starts a background "dd" to rebuild
	the array.

o       The reinit code has been worked over to be much more robust.

o       The timeout code has been overhauled for races.

o	Support of new chipsets.

o       Lots of fixes for bugs found while doing the modulerization and
        reviewing the old code.

Missing or changed features from current ATA:

o       atapi-cd no longer has support for ATAPI changers. Todays its
        much cheaper and alot faster to copy those CD images to disk
        and serve them from there. Besides they dont seem to be made
        anymore, maybe for that exact reason.

o       ATA RAID can only read metadata from all the above metadata formats,
	not write all of them (Promise and Highpoint V2 so far). This means
	that arrays can be picked up from the BIOS, but they cannot be
	created from FreeBSD. There is more to it than just the missing
	write metadata support, those formats are not unique to a given
	controller like Promise and Highpoint formats, instead they exist
	for several types, and even worse, some controllers can have
	different formats and its impossible to tell which one.
	The outcome is that we cannot reliably create the metadata of those
	formats and be sure the controller BIOS will understand it.
	However write support is needed to update/fail/rebuild the arrays
	properly so it sits fairly high on the TODO list.

o       So far atapicam is not supported with these changes. When/if this
	will change is up to the maintainer of atapi-cam so go there for
	questions.

HW donated by:  Webveveriet AS
HW donated by:  Frode Nordahl
HW donated by:  Yahoo!
HW donated by:  Sentex
Patience by:	Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00

76 lines
3.3 KiB
C

/*-
* Copyright (c) 1998 - 2005 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/* ATAPI Rewriteable drive Capabilities and Mechanical Status Page */
struct afd_cappage {
u_int16_t data_length;
u_int8_t medium_type;
#define MFD_2DD_UN 0x10
#define MFD_2DD 0x11
#define MFD_HD_UN 0x20
#define MFD_HD_12_98 0x22
#define MFD_HD_12 0x23
#define MFD_HD_144 0x24
#define MFD_UHD 0x31
#define MFD_UNKNOWN 0x00
#define MFD_NO_DISC 0x70
#define MFD_DOOR_OPEN 0x71
#define MFD_FMT_ERROR 0x72
u_int8_t reserved0 :7;
u_int8_t wp :1; /* write protect */
u_int8_t unused[4];
/* capabilities page */
u_int8_t page_code :6;
#define ATAPI_REWRITEABLE_CAP_PAGE 0x05
u_int8_t reserved1_6 :1;
u_int8_t ps :1; /* page save supported */
u_int8_t page_length; /* page length */
u_int16_t transfer_rate; /* in kilobits per second */
u_int8_t heads; /* number of heads */
u_int8_t sectors; /* number of sectors pr track */
u_int16_t sector_size; /* number of bytes per sector */
u_int16_t cylinders; /* number of cylinders */
u_int8_t reserved10[10];
u_int8_t motor_delay; /* motor off delay */
u_int8_t reserved21[7];
u_int16_t rpm; /* rotations per minute */
u_int8_t reserved30[2];
};
struct afd_softc {
struct afd_cappage cap; /* capabilities page info */
struct disk *disk; /* virtual drives */
};