d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a43680e9f
freebsd-dev/sys/dev/sio/sio.c
Paolo Pisati ef544f6312 o break newbus api: add a new argument of type driver_filter_t to 
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00

2613 lines
68 KiB
C
Raw Blame History

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
* from: i386/isa sio.c,v 1.234
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_comconsole.h"
#include "opt_compat.h"
#include "opt_gdb.h"
#include "opt_kdb.h"
#include "opt_sio.h"
/*
* Serial driver, based on 386BSD-0.1 com driver.
* Mostly rewritten to use pseudo-DMA.
* Works for National Semiconductor NS8250-NS16550AF UARTs.
* COM driver, based on HP dca driver.
*
* Changes for PC Card integration:
* - Added PC Card driver table and handlers
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/interrupt.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/reboot.h>
#include <sys/serial.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/tty.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/timepps.h>
#include <sys/uio.h>
#include <sys/cons.h>
#include <isa/isavar.h>
#include <machine/resource.h>
#include <dev/sio/sioreg.h>
#include <dev/sio/siovar.h>
#ifdef COM_ESP
#include <dev/ic/esp.h>
#endif
#include <dev/ic/ns16550.h>
#define LOTS_OF_EVENTS 64 /* helps separate urgent events from input */
#ifdef COM_MULTIPORT
/* checks in flags for multiport and which is multiport "master chip"
* for a given card
*/
#define COM_ISMULTIPORT(flags) ((flags) & 0x01)
#define COM_MPMASTER(flags) (((flags) >> 8) & 0x0ff)
#define COM_NOTAST4(flags) ((flags) & 0x04)
#else
#define COM_ISMULTIPORT(flags) (0)
#endif /* COM_MULTIPORT */
#define COM_C_IIR_TXRDYBUG 0x80000
#define COM_CONSOLE(flags) ((flags) & 0x10)
#define COM_DEBUGGER(flags) ((flags) & 0x80)
#define COM_FIFOSIZE(flags) (((flags) & 0xff000000) >> 24)
#define COM_FORCECONSOLE(flags) ((flags) & 0x20)
#define COM_IIR_TXRDYBUG(flags) ((flags) & COM_C_IIR_TXRDYBUG)
#define COM_LLCONSOLE(flags) ((flags) & 0x40)
#define COM_LOSESOUTINTS(flags) ((flags) & 0x08)
#define COM_NOFIFO(flags) ((flags) & 0x02)
#define COM_NOPROBE(flags) ((flags) & 0x40000)
#define COM_NOSCR(flags) ((flags) & 0x100000)
#define COM_PPSCTS(flags) ((flags) & 0x10000)
#define COM_ST16650A(flags) ((flags) & 0x20000)
#define COM_TI16754(flags) ((flags) & 0x200000)
#define sio_getreg(com, off) \
(bus_space_read_1((com)->bst, (com)->bsh, (off)))
#define sio_setreg(com, off, value) \
(bus_space_write_1((com)->bst, (com)->bsh, (off), (value)))
/*
* com state bits.
* (CS_BUSY | CS_TTGO) and (CS_BUSY | CS_TTGO | CS_ODEVREADY) must be higher
* than the other bits so that they can be tested as a group without masking
* off the low bits.
*
* The following com and tty flags correspond closely:
* CS_BUSY = TS_BUSY (maintained by comstart(), siopoll() and
* comstop())
* CS_TTGO = ~TS_TTSTOP (maintained by comparam() and comstart())
* CS_CTS_OFLOW = CCTS_OFLOW (maintained by comparam())
* CS_RTS_IFLOW = CRTS_IFLOW (maintained by comparam())
* TS_FLUSH is not used.
* XXX I think TIOCSETA doesn't clear TS_TTSTOP when it clears IXON.
* XXX CS_*FLOW should be CF_*FLOW in com->flags (control flags not state).
*/
#define CS_BUSY 0x80 /* output in progress */
#define CS_TTGO 0x40 /* output not stopped by XOFF */
#define CS_ODEVREADY 0x20 /* external device h/w ready (CTS) */
#define CS_CHECKMSR 1 /* check of MSR scheduled */
#define CS_CTS_OFLOW 2 /* use CTS output flow control */
#define CS_ODONE 4 /* output completed */
#define CS_RTS_IFLOW 8 /* use RTS input flow control */
#define CSE_BUSYCHECK 1 /* siobusycheck() scheduled */
static char const * const error_desc[] = {
#define CE_OVERRUN 0
"silo overflow",
#define CE_INTERRUPT_BUF_OVERFLOW 1
"interrupt-level buffer overflow",
#define CE_TTY_BUF_OVERFLOW 2
"tty-level buffer overflow",
};
#define CE_NTYPES 3
#define CE_RECORD(com, errnum) (++(com)->delta_error_counts[errnum])
/* types. XXX - should be elsewhere */
typedef u_int Port_t; /* hardware port */
typedef u_char bool_t; /* boolean */
/* queue of linear buffers */
struct lbq {
u_char *l_head; /* next char to process */
u_char *l_tail; /* one past the last char to process */
struct lbq *l_next; /* next in queue */
bool_t l_queued; /* nonzero if queued */
};
/* com device structure */
struct com_s {
u_char state; /* miscellaneous flag bits */
u_char cfcr_image; /* copy of value written to CFCR */
#ifdef COM_ESP
bool_t esp; /* is this unit a hayes esp board? */
#endif
u_char extra_state; /* more flag bits, separate for order trick */
u_char fifo_image; /* copy of value written to FIFO */
bool_t hasfifo; /* nonzero for 16550 UARTs */
bool_t loses_outints; /* nonzero if device loses output interrupts */
u_char mcr_image; /* copy of value written to MCR */
#ifdef COM_MULTIPORT
bool_t multiport; /* is this unit part of a multiport device? */
#endif /* COM_MULTIPORT */
bool_t no_irq; /* nonzero if irq is not attached */
bool_t gone; /* hardware disappeared */
bool_t poll; /* nonzero if polling is required */
bool_t poll_output; /* nonzero if polling for output is required */
bool_t st16650a; /* nonzero if Startech 16650A compatible */
int unit; /* unit number */
u_int flags; /* copy of device flags */
u_int tx_fifo_size;
/*
* The high level of the driver never reads status registers directly
* because there would be too many side effects to handle conveniently.
* Instead, it reads copies of the registers stored here by the
* interrupt handler.
*/
u_char last_modem_status; /* last MSR read by intr handler */
u_char prev_modem_status; /* last MSR handled by high level */
u_char *ibuf; /* start of input buffer */
u_char *ibufend; /* end of input buffer */
u_char *ibufold; /* old input buffer, to be freed */
u_char *ihighwater; /* threshold in input buffer */
u_char *iptr; /* next free spot in input buffer */
int ibufsize; /* size of ibuf (not include error bytes) */
int ierroff; /* offset of error bytes in ibuf */
struct lbq obufq; /* head of queue of output buffers */
struct lbq obufs[2]; /* output buffers */
bus_space_tag_t bst;
bus_space_handle_t bsh;
Port_t data_port; /* i/o ports */
#ifdef COM_ESP
Port_t esp_port;
#endif
Port_t int_ctl_port;
Port_t int_id_port;
Port_t modem_ctl_port;
Port_t line_status_port;
Port_t modem_status_port;
struct tty *tp; /* cross reference */
struct pps_state pps;
int pps_bit;
#ifdef ALT_BREAK_TO_DEBUGGER
int alt_brk_state;
#endif
u_long bytes_in; /* statistics */
u_long bytes_out;
u_int delta_error_counts[CE_NTYPES];
u_long error_counts[CE_NTYPES];
u_long rclk;
struct resource *irqres;
struct resource *ioportres;
int ioportrid;
void *cookie;
/*
* Data area for output buffers. Someday we should build the output
* buffer queue without copying data.
*/
u_char obuf1[256];
u_char obuf2[256];
};
#ifdef COM_ESP
static int espattach(struct com_s *com, Port_t esp_port);
#endif
static void combreak(struct tty *tp, int sig);
static timeout_t siobusycheck;
static u_int siodivisor(u_long rclk, speed_t speed);
static void comclose(struct tty *tp);
static int comopen(struct tty *tp, struct cdev *dev);
static void sioinput(struct com_s *com);
static void siointr1(struct com_s *com);
static int siointr(void *arg);
static int commodem(struct tty *tp, int sigon, int sigoff);
static int comparam(struct tty *tp, struct termios *t);
static void siopoll(void *);
static void siosettimeout(void);
static int siosetwater(struct com_s *com, speed_t speed);
static void comstart(struct tty *tp);
static void comstop(struct tty *tp, int rw);
static timeout_t comwakeup;
char sio_driver_name[] = "sio";
static struct mtx sio_lock;
static int sio_inited;
/* table and macro for fast conversion from a unit number to its com struct */
devclass_t sio_devclass;
#define com_addr(unit) ((struct com_s *) \
devclass_get_softc(sio_devclass, unit)) /* XXX */
int comconsole = -1;
static volatile speed_t comdefaultrate = CONSPEED;
static u_long comdefaultrclk = DEFAULT_RCLK;
SYSCTL_ULONG(_machdep, OID_AUTO, conrclk, CTLFLAG_RW, &comdefaultrclk, 0, "");
static speed_t gdbdefaultrate = GDBSPEED;
SYSCTL_UINT(_machdep, OID_AUTO, gdbspeed, CTLFLAG_RW,
&gdbdefaultrate, GDBSPEED, "");
static u_int com_events; /* input chars + weighted output completions */
static Port_t siocniobase;
static int siocnunit = -1;
static void *sio_slow_ih;
static void *sio_fast_ih;
static int sio_timeout;
static int sio_timeouts_until_log;
static struct callout_handle sio_timeout_handle
= CALLOUT_HANDLE_INITIALIZER(&sio_timeout_handle);
static int sio_numunits;
#ifdef GDB
static Port_t siogdbiobase = 0;
#endif
#ifdef COM_ESP
/* XXX configure this properly. */
/* XXX quite broken for new-bus. */
static Port_t likely_com_ports[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, };
static Port_t likely_esp_ports[] = { 0x140, 0x180, 0x280, 0 };
#endif
/*
* handle sysctl read/write requests for console speed
*
* In addition to setting comdefaultrate for I/O through /dev/console,
* also set the initial and lock values for the /dev/ttyXX device
* if there is one associated with the console. Finally, if the /dev/tty
* device has already been open, change the speed on the open running port
* itself.
*/
static int
sysctl_machdep_comdefaultrate(SYSCTL_HANDLER_ARGS)
{
int error, s;
speed_t newspeed;
struct com_s *com;
struct tty *tp;
newspeed = comdefaultrate;
error = sysctl_handle_opaque(oidp, &newspeed, sizeof newspeed, req);
if (error || !req->newptr)
return (error);
comdefaultrate = newspeed;
if (comconsole < 0) /* serial console not selected? */
return (0);
com = com_addr(comconsole);
if (com == NULL)
return (ENXIO);
tp = com->tp;
if (tp == NULL)
return (ENXIO);
/*
* set the initial and lock rates for /dev/ttydXX and /dev/cuaXX
* (note, the lock rates really are boolean -- if non-zero, disallow
* speed changes)
*/
tp->t_init_in.c_ispeed = tp->t_init_in.c_ospeed =
tp->t_lock_in.c_ispeed = tp->t_lock_in.c_ospeed =
tp->t_init_out.c_ispeed = tp->t_init_out.c_ospeed =
tp->t_lock_out.c_ispeed = tp->t_lock_out.c_ospeed = comdefaultrate;
if (tp->t_state & TS_ISOPEN) {
tp->t_termios.c_ispeed =
tp->t_termios.c_ospeed = comdefaultrate;
s = spltty();
error = comparam(tp, &tp->t_termios);
splx(s);
}
return error;
}
SYSCTL_PROC(_machdep, OID_AUTO, conspeed, CTLTYPE_INT | CTLFLAG_RW,
0, 0, sysctl_machdep_comdefaultrate, "I", "");
TUNABLE_INT("machdep.conspeed", __DEVOLATILE(int *, &comdefaultrate));
#define SET_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) | (bit))
#define CLR_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) & ~(bit))
/*
* Unload the driver and clear the table.
* XXX this is mostly wrong.
* XXX TODO:
* This is usually called when the card is ejected, but
* can be caused by a kldunload of a controller driver.
* The idea is to reset the driver's view of the device
* and ensure that any driver entry points such as
* read and write do not hang.
*/
int
siodetach(device_t dev)
{
struct com_s *com;
com = (struct com_s *) device_get_softc(dev);
if (com == NULL) {
device_printf(dev, "NULL com in siounload\n");
return (0);
}
com->gone = TRUE;
if (com->tp)
ttyfree(com->tp);
if (com->irqres) {
bus_teardown_intr(dev, com->irqres, com->cookie);
bus_release_resource(dev, SYS_RES_IRQ, 0, com->irqres);
}
if (com->ioportres)
bus_release_resource(dev, SYS_RES_IOPORT, com->ioportrid,
com->ioportres);
if (com->ibuf != NULL)
free(com->ibuf, M_DEVBUF);
device_set_softc(dev, NULL);
free(com, M_DEVBUF);
return (0);
}
int
sioprobe(dev, xrid, rclk, noprobe)
device_t dev;
int xrid;
u_long rclk;
int noprobe;
{
#if 0
static bool_t already_init;
device_t xdev;
#endif
struct com_s *com;
u_int divisor;
bool_t failures[10];
int fn;
device_t idev;
Port_t iobase;
intrmask_t irqmap[4];
intrmask_t irqs;
u_char mcr_image;
int result;
u_long xirq;
u_int flags = device_get_flags(dev);
int rid;
struct resource *port;
rid = xrid;
port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, IO_COMSIZE, RF_ACTIVE);
if (!port)
return (ENXIO);
com = malloc(sizeof(*com), M_DEVBUF, M_NOWAIT | M_ZERO);
if (com == NULL) {
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
return (ENOMEM);
}
device_set_softc(dev, com);
com->bst = rman_get_bustag(port);
com->bsh = rman_get_bushandle(port);
if (rclk == 0)
rclk = DEFAULT_RCLK;
com->rclk = rclk;
while (sio_inited != 2)
if (atomic_cmpset_int(&sio_inited, 0, 1)) {
mtx_init(&sio_lock, sio_driver_name, NULL,
(comconsole != -1) ?
MTX_SPIN | MTX_QUIET : MTX_SPIN);
atomic_store_rel_int(&sio_inited, 2);
}
#if 0
/*
* XXX this is broken - when we are first called, there are no
* previously configured IO ports. We could hard code
* 0x3f8, 0x2f8, 0x3e8, 0x2e8 etc but that's probably worse.
* This code has been doing nothing since the conversion since
* "count" is zero the first time around.
*/
if (!already_init) {
/*
* Turn off MCR_IENABLE for all likely serial ports. An unused
* port with its MCR_IENABLE gate open will inhibit interrupts
* from any used port that shares the interrupt vector.
* XXX the gate enable is elsewhere for some multiports.
*/
device_t *devs;
int count, i, xioport;
devclass_get_devices(sio_devclass, &devs, &count);
for (i = 0; i < count; i++) {
xdev = devs[i];
if (device_is_enabled(xdev) &&
bus_get_resource(xdev, SYS_RES_IOPORT, 0, &xioport,
NULL) == 0)
outb(xioport + com_mcr, 0);
}
free(devs, M_TEMP);
already_init = TRUE;
}
#endif
if (COM_LLCONSOLE(flags)) {
printf("sio%d: reserved for low-level i/o\n",
device_get_unit(dev));
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
device_set_softc(dev, NULL);
free(com, M_DEVBUF);
return (ENXIO);
}
/*
* If the device is on a multiport card and has an AST/4
* compatible interrupt control register, initialize this
* register and prepare to leave MCR_IENABLE clear in the mcr.
* Otherwise, prepare to set MCR_IENABLE in the mcr.
* Point idev to the device struct giving the correct id_irq.
* This is the struct for the master device if there is one.
*/
idev = dev;
mcr_image = MCR_IENABLE;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(flags)) {
Port_t xiobase;
u_long io;
idev = devclass_get_device(sio_devclass, COM_MPMASTER(flags));
if (idev == NULL) {
printf("sio%d: master device %d not configured\n",
device_get_unit(dev), COM_MPMASTER(flags));
idev = dev;
}
if (!COM_NOTAST4(flags)) {
if (bus_get_resource(idev, SYS_RES_IOPORT, 0, &io,
NULL) == 0) {
xiobase = io;
if (bus_get_resource(idev, SYS_RES_IRQ, 0,
NULL, NULL) == 0)
outb(xiobase + com_scr, 0x80);
else
outb(xiobase + com_scr, 0);
}
mcr_image = 0;
}
}
#endif /* COM_MULTIPORT */
if (bus_get_resource(idev, SYS_RES_IRQ, 0, NULL, NULL) != 0)
mcr_image = 0;
bzero(failures, sizeof failures);
iobase = rman_get_start(port);
/*
* We don't want to get actual interrupts, just masked ones.
* Interrupts from this line should already be masked in the ICU,
* but mask them in the processor as well in case there are some
* (misconfigured) shared interrupts.
*/
mtx_lock_spin(&sio_lock);
/* EXTRA DELAY? */
/*
* For the TI16754 chips, set prescaler to 1 (4 is often the
* default after-reset value) as otherwise it's impossible to
* get highest baudrates.
*/
if (COM_TI16754(flags)) {
u_char cfcr, efr;
cfcr = sio_getreg(com, com_cfcr);
sio_setreg(com, com_cfcr, CFCR_EFR_ENABLE);
efr = sio_getreg(com, com_efr);
/* Unlock extended features to turn off prescaler. */
sio_setreg(com, com_efr, efr | EFR_EFE);
/* Disable EFR. */
sio_setreg(com, com_cfcr, (cfcr != CFCR_EFR_ENABLE) ? cfcr : 0);
/* Turn off prescaler. */
sio_setreg(com, com_mcr,
sio_getreg(com, com_mcr) & ~MCR_PRESCALE);
sio_setreg(com, com_cfcr, CFCR_EFR_ENABLE);
sio_setreg(com, com_efr, efr);
sio_setreg(com, com_cfcr, cfcr);
}
/*
* Initialize the speed and the word size and wait long enough to
* drain the maximum of 16 bytes of junk in device output queues.
* The speed is undefined after a master reset and must be set
* before relying on anything related to output. There may be
* junk after a (very fast) soft reboot and (apparently) after
* master reset.
* XXX what about the UART bug avoided by waiting in comparam()?
* We don't want to to wait long enough to drain at 2 bps.
*/
if (iobase == siocniobase)
DELAY((16 + 1) * 1000000 / (comdefaultrate / 10));
else {
sio_setreg(com, com_cfcr, CFCR_DLAB | CFCR_8BITS);
divisor = siodivisor(rclk, SIO_TEST_SPEED);
sio_setreg(com, com_dlbl, divisor & 0xff);
sio_setreg(com, com_dlbh, divisor >> 8);
sio_setreg(com, com_cfcr, CFCR_8BITS);
DELAY((16 + 1) * 1000000 / (SIO_TEST_SPEED / 10));
}
/*
* Enable the interrupt gate and disable device interupts. This
* should leave the device driving the interrupt line low and
* guarantee an edge trigger if an interrupt can be generated.
*/
/* EXTRA DELAY? */
sio_setreg(com, com_mcr, mcr_image);
sio_setreg(com, com_ier, 0);
DELAY(1000); /* XXX */
irqmap[0] = isa_irq_pending();
/*
* Attempt to set loopback mode so that we can send a null byte
* without annoying any external device.
*/
/* EXTRA DELAY? */
sio_setreg(com, com_mcr, mcr_image | MCR_LOOPBACK);
/*
* Attempt to generate an output interrupt. On 8250's, setting
* IER_ETXRDY generates an interrupt independent of the current
* setting and independent of whether the THR is empty. On 16450's,
* setting IER_ETXRDY generates an interrupt independent of the
* current setting. On 16550A's, setting IER_ETXRDY only
* generates an interrupt when IER_ETXRDY is not already set.
*/
sio_setreg(com, com_ier, IER_ETXRDY);
/*
* On some 16x50 incompatibles, setting IER_ETXRDY doesn't generate
* an interrupt. They'd better generate one for actually doing
* output. Loopback may be broken on the same incompatibles but
* it's unlikely to do more than allow the null byte out.
*/
sio_setreg(com, com_data, 0);
if (iobase == siocniobase)
DELAY((1 + 2) * 1000000 / (comdefaultrate / 10));
else
DELAY((1 + 2) * 1000000 / (SIO_TEST_SPEED / 10));
/*
* Turn off loopback mode so that the interrupt gate works again
* (MCR_IENABLE was hidden). This should leave the device driving
* an interrupt line high. It doesn't matter if the interrupt
* line oscillates while we are not looking at it, since interrupts
* are disabled.
*/
/* EXTRA DELAY? */
sio_setreg(com, com_mcr, mcr_image);
/*
* It seems my Xircom CBEM56G Cardbus modem wants to be reset
* to 8 bits *again*, or else probe test 0 will fail.
* gwk@sgi.com, 4/19/2001
*/
sio_setreg(com, com_cfcr, CFCR_8BITS);
/*
* Some PCMCIA cards (Palido 321s, DC-1S, ...) have the "TXRDY bug",
* so we probe for a buggy IIR_TXRDY implementation even in the
* noprobe case. We don't probe for it in the !noprobe case because
* noprobe is always set for PCMCIA cards and the problem is not
* known to affect any other cards.
*/
if (noprobe) {
/* Read IIR a few times. */
for (fn = 0; fn < 2; fn ++) {
DELAY(10000);
failures[6] = sio_getreg(com, com_iir);
}
/* IIR_TXRDY should be clear. Is it? */
result = 0;
if (failures[6] & IIR_TXRDY) {
/*
* No. We seem to have the bug. Does our fix for
* it work?
*/
sio_setreg(com, com_ier, 0);
if (sio_getreg(com, com_iir) & IIR_NOPEND) {
/* Yes. We discovered the TXRDY bug! */
SET_FLAG(dev, COM_C_IIR_TXRDYBUG);
} else {
/* No. Just fail. XXX */
result = ENXIO;
sio_setreg(com, com_mcr, 0);
}
} else {
/* Yes. No bug. */
CLR_FLAG(dev, COM_C_IIR_TXRDYBUG);
}
sio_setreg(com, com_ier, 0);
sio_setreg(com, com_cfcr, CFCR_8BITS);
mtx_unlock_spin(&sio_lock);
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
if (iobase == siocniobase)
result = 0;
if (result != 0) {
device_set_softc(dev, NULL);
free(com, M_DEVBUF);
}
return (result == 0 ? BUS_PROBE_DEFAULT + 1 : result);
}
/*
* Check that
* o the CFCR, IER and MCR in UART hold the values written to them
* (the values happen to be all distinct - this is good for
* avoiding false positive tests from bus echoes).
* o an output interrupt is generated and its vector is correct.
* o the interrupt goes away when the IIR in the UART is read.
*/
/* EXTRA DELAY? */
failures[0] = sio_getreg(com, com_cfcr) - CFCR_8BITS;
failures[1] = sio_getreg(com, com_ier) - IER_ETXRDY;
failures[2] = sio_getreg(com, com_mcr) - mcr_image;
DELAY(10000); /* Some internal modems need this time */
irqmap[1] = isa_irq_pending();
failures[4] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_TXRDY;
DELAY(1000); /* XXX */
irqmap[2] = isa_irq_pending();
failures[6] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_NOPEND;
/*
* Turn off all device interrupts and check that they go off properly.
* Leave MCR_IENABLE alone. For ports without a master port, it gates
* the OUT2 output of the UART to
* the ICU input. Closing the gate would give a floating ICU input
* (unless there is another device driving it) and spurious interrupts.
* (On the system that this was first tested on, the input floats high
* and gives a (masked) interrupt as soon as the gate is closed.)
*/
sio_setreg(com, com_ier, 0);
sio_setreg(com, com_cfcr, CFCR_8BITS); /* dummy to avoid bus echo */
failures[7] = sio_getreg(com, com_ier);
DELAY(1000); /* XXX */
irqmap[3] = isa_irq_pending();
failures[9] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_NOPEND;
mtx_unlock_spin(&sio_lock);
irqs = irqmap[1] & ~irqmap[0];
if (bus_get_resource(idev, SYS_RES_IRQ, 0, &xirq, NULL) == 0 &&
((1 << xirq) & irqs) == 0) {
printf(
"sio%d: configured irq %ld not in bitmap of probed irqs %#x\n",
device_get_unit(dev), xirq, irqs);
printf(
"sio%d: port may not be enabled\n",
device_get_unit(dev));
}
if (bootverbose)
printf("sio%d: irq maps: %#x %#x %#x %#x\n",
device_get_unit(dev),
irqmap[0], irqmap[1], irqmap[2], irqmap[3]);
result = 0;
for (fn = 0; fn < sizeof failures; ++fn)
if (failures[fn]) {
sio_setreg(com, com_mcr, 0);
result = ENXIO;
if (bootverbose) {
printf("sio%d: probe failed test(s):",
device_get_unit(dev));
for (fn = 0; fn < sizeof failures; ++fn)
if (failures[fn])
printf(" %d", fn);
printf("\n");
}
break;
}
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
if (iobase == siocniobase)
result = 0;
if (result != 0) {
device_set_softc(dev, NULL);
free(com, M_DEVBUF);
}
return (result == 0 ? BUS_PROBE_DEFAULT + 1 : result);
}
#ifdef COM_ESP
static int
espattach(com, esp_port)
struct com_s *com;
Port_t esp_port;
{
u_char dips;
u_char val;
/*
* Check the ESP-specific I/O port to see if we're an ESP
* card. If not, return failure immediately.
*/
if ((inb(esp_port) & 0xf3) == 0) {
printf(" port 0x%x is not an ESP board?\n", esp_port);
return (0);
}
/*
* We've got something that claims to be a Hayes ESP card.
* Let's hope so.
*/
/* Get the dip-switch configuration */
outb(esp_port + ESP_CMD1, ESP_GETDIPS);
dips = inb(esp_port + ESP_STATUS1);
/*
* Bits 0,1 of dips say which COM port we are.
*/
if (rman_get_start(com->ioportres) == likely_com_ports[dips & 0x03])
printf(" : ESP");
else {
printf(" esp_port has com %d\n", dips & 0x03);
return (0);
}
/*
* Check for ESP version 2.0 or later: bits 4,5,6 = 010.
*/
outb(esp_port + ESP_CMD1, ESP_GETTEST);
val = inb(esp_port + ESP_STATUS1); /* clear reg 1 */
val = inb(esp_port + ESP_STATUS2);
if ((val & 0x70) < 0x20) {
printf("-old (%o)", val & 0x70);
return (0);
}
/*
* Check for ability to emulate 16550: bit 7 == 1
*/
if ((dips & 0x80) == 0) {
printf(" slave");
return (0);
}
/*
* Okay, we seem to be a Hayes ESP card. Whee.
*/
com->esp = TRUE;
com->esp_port = esp_port;
return (1);
}
#endif /* COM_ESP */
int
sioattach(dev, xrid, rclk)
device_t dev;
int xrid;
u_long rclk;
{
struct com_s *com;
#ifdef COM_ESP
Port_t *espp;
#endif
Port_t iobase;
int unit;
u_int flags;
int rid;
struct resource *port;
int ret;
int error;
struct tty *tp;
rid = xrid;
port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, IO_COMSIZE, RF_ACTIVE);
if (!port)
return (ENXIO);
iobase = rman_get_start(port);
unit = device_get_unit(dev);
com = device_get_softc(dev);
flags = device_get_flags(dev);
if (unit >= sio_numunits)
sio_numunits = unit + 1;
/*
* sioprobe() has initialized the device registers as follows:
* o cfcr = CFCR_8BITS.
* It is most important that CFCR_DLAB is off, so that the
* data port is not hidden when we enable interrupts.
* o ier = 0.
* Interrupts are only enabled when the line is open.
* o mcr = MCR_IENABLE, or 0 if the port has AST/4 compatible
* interrupt control register or the config specifies no irq.
* Keeping MCR_DTR and MCR_RTS off might stop the external
* device from sending before we are ready.
*/
bzero(com, sizeof *com);
com->unit = unit;
com->ioportres = port;
com->ioportrid = rid;
com->bst = rman_get_bustag(port);
com->bsh = rman_get_bushandle(port);
com->cfcr_image = CFCR_8BITS;
com->loses_outints = COM_LOSESOUTINTS(flags) != 0;
com->no_irq = bus_get_resource(dev, SYS_RES_IRQ, 0, NULL, NULL) != 0;
com->tx_fifo_size = 1;
com->obufs[0].l_head = com->obuf1;
com->obufs[1].l_head = com->obuf2;
com->data_port = iobase + com_data;
com->int_ctl_port = iobase + com_ier;
com->int_id_port = iobase + com_iir;
com->modem_ctl_port = iobase + com_mcr;
com->mcr_image = inb(com->modem_ctl_port);
com->line_status_port = iobase + com_lsr;
com->modem_status_port = iobase + com_msr;
tp = com->tp = ttyalloc();
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_stop = comstop;
tp->t_modem = commodem;
tp->t_break = combreak;
tp->t_close = comclose;
tp->t_open = comopen;
tp->t_sc = com;
if (rclk == 0)
rclk = DEFAULT_RCLK;
com->rclk = rclk;
if (unit == comconsole)
ttyconsolemode(tp, comdefaultrate);
error = siosetwater(com, tp->t_init_in.c_ispeed);
mtx_unlock_spin(&sio_lock);
if (error) {
/*
* Leave i/o resources allocated if this is a `cn'-level
* console, so that other devices can't snarf them.
*/
if (iobase != siocniobase)
bus_release_resource(dev, SYS_RES_IOPORT, rid, port);
return (ENOMEM);
}
/* attempt to determine UART type */
printf("sio%d: type", unit);
if (!COM_ISMULTIPORT(flags) &&
!COM_IIR_TXRDYBUG(flags) && !COM_NOSCR(flags)) {
u_char scr;
u_char scr1;
u_char scr2;
scr = sio_getreg(com, com_scr);
sio_setreg(com, com_scr, 0xa5);
scr1 = sio_getreg(com, com_scr);
sio_setreg(com, com_scr, 0x5a);
scr2 = sio_getreg(com, com_scr);
sio_setreg(com, com_scr, scr);
if (scr1 != 0xa5 || scr2 != 0x5a) {
printf(" 8250 or not responding");
goto determined_type;
}
}
sio_setreg(com, com_fifo, FIFO_ENABLE | FIFO_RX_HIGH);
DELAY(100);
switch (inb(com->int_id_port) & IIR_FIFO_MASK) {
case FIFO_RX_LOW:
printf(" 16450");
break;
case FIFO_RX_MEDL:
printf(" 16450?");
break;
case FIFO_RX_MEDH:
printf(" 16550?");
break;
case FIFO_RX_HIGH:
if (COM_NOFIFO(flags)) {
printf(" 16550A fifo disabled");
break;
}
com->hasfifo = TRUE;
if (COM_ST16650A(flags)) {
printf(" ST16650A");
com->st16650a = TRUE;
com->tx_fifo_size = 32;
break;
}
if (COM_TI16754(flags)) {
printf(" TI16754");
com->tx_fifo_size = 64;
break;
}
printf(" 16550A");
#ifdef COM_ESP
for (espp = likely_esp_ports; *espp != 0; espp++)
if (espattach(com, *espp)) {
com->tx_fifo_size = 1024;
break;
}
if (com->esp)
break;
#endif
com->tx_fifo_size = COM_FIFOSIZE(flags);
if (com->tx_fifo_size == 0)
com->tx_fifo_size = 16;
else
printf(" lookalike with %u bytes FIFO",
com->tx_fifo_size);
break;
}
#ifdef COM_ESP
if (com->esp) {
/*
* Set 16550 compatibility mode.
* We don't use the ESP_MODE_SCALE bit to increase the
* fifo trigger levels because we can't handle large
* bursts of input.
* XXX flow control should be set in comparam(), not here.
*/
outb(com->esp_port + ESP_CMD1, ESP_SETMODE);
outb(com->esp_port + ESP_CMD2, ESP_MODE_RTS | ESP_MODE_FIFO);
/* Set RTS/CTS flow control. */
outb(com->esp_port + ESP_CMD1, ESP_SETFLOWTYPE);
outb(com->esp_port + ESP_CMD2, ESP_FLOW_RTS);
outb(com->esp_port + ESP_CMD2, ESP_FLOW_CTS);
/* Set flow-control levels. */
outb(com->esp_port + ESP_CMD1, ESP_SETRXFLOW);
outb(com->esp_port + ESP_CMD2, HIBYTE(768));
outb(com->esp_port + ESP_CMD2, LOBYTE(768));
outb(com->esp_port + ESP_CMD2, HIBYTE(512));
outb(com->esp_port + ESP_CMD2, LOBYTE(512));
}
#endif /* COM_ESP */
sio_setreg(com, com_fifo, 0);
determined_type: ;
#ifdef COM_MULTIPORT
if (COM_ISMULTIPORT(flags)) {
device_t masterdev;
com->multiport = TRUE;
printf(" (multiport");
if (unit == COM_MPMASTER(flags))
printf(" master");
printf(")");
masterdev = devclass_get_device(sio_devclass,
COM_MPMASTER(flags));
com->no_irq = (masterdev == NULL || bus_get_resource(masterdev,
SYS_RES_IRQ, 0, NULL, NULL) != 0);
}
#endif /* COM_MULTIPORT */
if (unit == comconsole)
printf(", console");
if (COM_IIR_TXRDYBUG(flags))
printf(" with a buggy IIR_TXRDY implementation");
printf("\n");
if (sio_fast_ih == NULL) {
swi_add(&tty_intr_event, "sio", siopoll, NULL, SWI_TTY, 0,
&sio_fast_ih);
swi_add(&clk_intr_event, "sio", siopoll, NULL, SWI_CLOCK, 0,
&sio_slow_ih);
}
com->flags = flags;
com->pps.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
tp->t_pps = &com->pps;
if (COM_PPSCTS(flags))
com->pps_bit = MSR_CTS;
else
com->pps_bit = MSR_DCD;
pps_init(&com->pps);
rid = 0;
com->irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (com->irqres) {
ret = bus_setup_intr(dev, com->irqres,
INTR_TYPE_TTY,
siointr, NULL, com,
&com->cookie);
if (ret) {
ret = bus_setup_intr(dev,
com->irqres, INTR_TYPE_TTY,
NULL, (driver_intr_t *)siointr, com, &com->cookie);
if (ret == 0)
device_printf(dev, "unable to activate interrupt in fast mode - using normal mode\n");
}
if (ret)
device_printf(dev, "could not activate interrupt\n");
#if defined(KDB) && (defined(BREAK_TO_DEBUGGER) || \
defined(ALT_BREAK_TO_DEBUGGER))
/*
* Enable interrupts for early break-to-debugger support
* on the console.
*/
if (ret == 0 && unit == comconsole)
outb(siocniobase + com_ier, IER_ERXRDY | IER_ERLS |
IER_EMSC);
#endif
}
/* We're ready, open the doors... */
ttycreate(tp, TS_CALLOUT, "d%r", unit);
return (0);
}
static int
comopen(struct tty *tp, struct cdev *dev)
{
struct com_s *com;
int i;
com = tp->t_sc;
com->poll = com->no_irq;
com->poll_output = com->loses_outints;
if (com->hasfifo) {
/*
* (Re)enable and drain fifos.
*
* Certain SMC chips cause problems if the fifos
* are enabled while input is ready. Turn off the
* fifo if necessary to clear the input. We test
* the input ready bit after enabling the fifos
* since we've already enabled them in comparam()
* and to handle races between enabling and fresh
* input.
*/
for (i = 0; i < 500; i++) {
sio_setreg(com, com_fifo,
FIFO_RCV_RST | FIFO_XMT_RST
| com->fifo_image);
/*
* XXX the delays are for superstitious
* historical reasons. It must be less than
* the character time at the maximum
* supported speed (87 usec at 115200 bps
* 8N1). Otherwise we might loop endlessly
* if data is streaming in. We used to use
* delays of 100. That usually worked
* because DELAY(100) used to usually delay
* for about 85 usec instead of 100.
*/
DELAY(50);
if (!(inb(com->line_status_port) & LSR_RXRDY))
break;
sio_setreg(com, com_fifo, 0);
DELAY(50);
(void) inb(com->data_port);
}
if (i == 500)
return (EIO);
}
mtx_lock_spin(&sio_lock);
(void) inb(com->line_status_port);
(void) inb(com->data_port);
com->prev_modem_status = com->last_modem_status
= inb(com->modem_status_port);
outb(com->int_ctl_port,
IER_ERXRDY | IER_ERLS | IER_EMSC
| (COM_IIR_TXRDYBUG(com->flags) ? 0 : IER_ETXRDY));
mtx_unlock_spin(&sio_lock);
siosettimeout();
/* XXX: should be generic ? */
if (com->prev_modem_status & MSR_DCD || ISCALLOUT(dev))
ttyld_modem(tp, 1);
return (0);
}
static void
comclose(tp)
struct tty *tp;
{
int s;
struct com_s *com;
s = spltty();
com = tp->t_sc;
com->poll = FALSE;
com->poll_output = FALSE;
sio_setreg(com, com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
#if defined(KDB) && (defined(BREAK_TO_DEBUGGER) || \
defined(ALT_BREAK_TO_DEBUGGER))
/*
* Leave interrupts enabled and don't clear DTR if this is the
* console. This allows us to detect break-to-debugger events
* while the console device is closed.
*/
if (com->unit != comconsole)
#endif
{
sio_setreg(com, com_ier, 0);
if (tp->t_cflag & HUPCL
/*
* XXX we will miss any carrier drop between here and the
* next open. Perhaps we should watch DCD even when the
* port is closed; it is not sufficient to check it at
* the next open because it might go up and down while
* we're not watching.
*/
|| (!tp->t_actout
&& !(com->prev_modem_status & MSR_DCD)
&& !(tp->t_init_in.c_cflag & CLOCAL))
|| !(tp->t_state & TS_ISOPEN)) {
(void)commodem(tp, 0, SER_DTR);
ttydtrwaitstart(tp);
}
}
if (com->hasfifo) {
/*
* Disable fifos so that they are off after controlled
* reboots. Some BIOSes fail to detect 16550s when the
* fifos are enabled.
*/
sio_setreg(com, com_fifo, 0);
}
tp->t_actout = FALSE;
wakeup(&tp->t_actout);
wakeup(TSA_CARR_ON(tp)); /* restart any wopeners */
siosettimeout();
splx(s);
}
static void
siobusycheck(chan)
void *chan;
{
struct com_s *com;
int s;
com = (struct com_s *)chan;
/*
* Clear TS_BUSY if low-level output is complete.
* spl locking is sufficient because siointr1() does not set CS_BUSY.
* If siointr1() clears CS_BUSY after we look at it, then we'll get
* called again. Reading the line status port outside of siointr1()
* is safe because CS_BUSY is clear so there are no output interrupts
* to lose.
*/
s = spltty();
if (com->state & CS_BUSY)
com->extra_state &= ~CSE_BUSYCHECK; /* False alarm. */
else if ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
== (LSR_TSRE | LSR_TXRDY)) {
com->tp->t_state &= ~TS_BUSY;
ttwwakeup(com->tp);
com->extra_state &= ~CSE_BUSYCHECK;
} else
timeout(siobusycheck, com, hz / 100);
splx(s);
}
static u_int
siodivisor(rclk, speed)
u_long rclk;
speed_t speed;
{
long actual_speed;
u_int divisor;
int error;
if (speed == 0)
return (0);
#if UINT_MAX > (ULONG_MAX - 1) / 8
if (speed > (ULONG_MAX - 1) / 8)
return (0);
#endif
divisor = (rclk / (8UL * speed) + 1) / 2;
if (divisor == 0 || divisor >= 65536)
return (0);
actual_speed = rclk / (16UL * divisor);
/* 10 times error in percent: */
error = ((actual_speed - (long)speed) * 2000 / (long)speed + 1) / 2;
/* 3.0% maximum error tolerance: */
if (error < -30 || error > 30)
return (0);
return (divisor);
}
/*
* Call this function with the sio_lock mutex held. It will return with the
* lock still held.
*/
static void
sioinput(com)
struct com_s *com;
{
u_char *buf;
int incc;
u_char line_status;
int recv_data;
struct tty *tp;
buf = com->ibuf;
tp = com->tp;
if (!(tp->t_state & TS_ISOPEN) || !(tp->t_cflag & CREAD)) {
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
return;
}
if (tp->t_state & TS_CAN_BYPASS_L_RINT) {
/*
* Avoid the grotesquely inefficient lineswitch routine
* (ttyinput) in "raw" mode. It usually takes about 450
* instructions (that's without canonical processing or echo!).
* slinput is reasonably fast (usually 40 instructions plus
* call overhead).
*/
do {
/*
* This may look odd, but it is using save-and-enable
* semantics instead of the save-and-disable semantics
* that are used everywhere else.
*/
mtx_unlock_spin(&sio_lock);
incc = com->iptr - buf;
if (tp->t_rawq.c_cc + incc > tp->t_ihiwat
&& (com->state & CS_RTS_IFLOW
|| tp->t_iflag & IXOFF)
&& !(tp->t_state & TS_TBLOCK))
ttyblock(tp);
com->delta_error_counts[CE_TTY_BUF_OVERFLOW]
+= b_to_q((char *)buf, incc, &tp->t_rawq);
buf += incc;
tk_nin += incc;
tk_rawcc += incc;
tp->t_rawcc += incc;
ttwakeup(tp);
if (tp->t_state & TS_TTSTOP
&& (tp->t_iflag & IXANY
|| tp->t_cc[VSTART] == tp->t_cc[VSTOP])) {
tp->t_state &= ~TS_TTSTOP;
tp->t_lflag &= ~FLUSHO;
comstart(tp);
}
mtx_lock_spin(&sio_lock);
} while (buf < com->iptr);
} else {
do {
/*
* This may look odd, but it is using save-and-enable
* semantics instead of the save-and-disable semantics
* that are used everywhere else.
*/
mtx_unlock_spin(&sio_lock);
line_status = buf[com->ierroff];
recv_data = *buf++;
if (line_status
& (LSR_BI | LSR_FE | LSR_OE | LSR_PE)) {
if (line_status & LSR_BI)
recv_data |= TTY_BI;
if (line_status & LSR_FE)
recv_data |= TTY_FE;
if (line_status & LSR_OE)
recv_data |= TTY_OE;
if (line_status & LSR_PE)
recv_data |= TTY_PE;
}
ttyld_rint(tp, recv_data);
mtx_lock_spin(&sio_lock);
} while (buf < com->iptr);
}
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
/*
* There is now room for another low-level buffer full of input,
* so enable RTS if it is now disabled and there is room in the
* high-level buffer.
*/
if ((com->state & CS_RTS_IFLOW) && !(com->mcr_image & MCR_RTS) &&
!(tp->t_state & TS_TBLOCK))
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
static int
siointr(arg)
void *arg;
{
struct com_s *com;
#ifndef COM_MULTIPORT
com = (struct com_s *)arg;
mtx_lock_spin(&sio_lock);
siointr1(com);
mtx_unlock_spin(&sio_lock);
#else /* COM_MULTIPORT */
bool_t possibly_more_intrs;
int unit;
/*
* Loop until there is no activity on any port. This is necessary
* to get an interrupt edge more than to avoid another interrupt.
* If the IRQ signal is just an OR of the IRQ signals from several
* devices, then the edge from one may be lost because another is
* on.
*/
mtx_lock_spin(&sio_lock);
do {
possibly_more_intrs = FALSE;
for (unit = 0; unit < sio_numunits; ++unit) {
com = com_addr(unit);
/*
* XXX COM_LOCK();
* would it work here, or be counter-productive?
*/
if (com != NULL
&& !com->gone
&& (inb(com->int_id_port) & IIR_IMASK)
!= IIR_NOPEND) {
siointr1(com);
possibly_more_intrs = TRUE;
}
/* XXX COM_UNLOCK(); */
}
} while (possibly_more_intrs);
mtx_unlock_spin(&sio_lock);
#endif /* COM_MULTIPORT */
return(FILTER_HANDLED);
}
static struct timespec siots[8];
static int siotso;
static int volatile siotsunit = -1;
static int
sysctl_siots(SYSCTL_HANDLER_ARGS)
{
char buf[128];
long long delta;
size_t len;
int error, i, tso;
for (i = 1, tso = siotso; i < tso; i++) {
delta = (long long)(siots[i].tv_sec - siots[i - 1].tv_sec) *
1000000000 +
(siots[i].tv_nsec - siots[i - 1].tv_nsec);
len = sprintf(buf, "%lld\n", delta);
if (delta >= 110000)
len += sprintf(buf + len - 1, ": *** %ld.%09ld\n",
(long)siots[i].tv_sec, siots[i].tv_nsec) - 1;
if (i == tso - 1)
buf[len - 1] = '\0';
error = SYSCTL_OUT(req, buf, len);
if (error != 0)
return (error);
uio_yield();
}
return (0);
}
SYSCTL_PROC(_machdep, OID_AUTO, siots, CTLTYPE_STRING | CTLFLAG_RD,
0, 0, sysctl_siots, "A", "sio timestamps");
static void
siointr1(com)
struct com_s *com;
{
u_char int_ctl;
u_char int_ctl_new;
u_char line_status;
u_char modem_status;
u_char *ioptr;
u_char recv_data;
if (COM_IIR_TXRDYBUG(com->flags)) {
int_ctl = inb(com->int_ctl_port);
int_ctl_new = int_ctl;
} else {
int_ctl = 0;
int_ctl_new = 0;
}
while (!com->gone) {
if (com->pps.ppsparam.mode & PPS_CAPTUREBOTH) {
modem_status = inb(com->modem_status_port);
if ((modem_status ^ com->last_modem_status) &
com->pps_bit) {
pps_capture(&com->pps);
pps_event(&com->pps,
(modem_status & com->pps_bit) ?
PPS_CAPTUREASSERT : PPS_CAPTURECLEAR);
}
}
line_status = inb(com->line_status_port);
/* input event? (check first to help avoid overruns) */
while (line_status & LSR_RCV_MASK) {
/* break/unnattached error bits or real input? */
if (!(line_status & LSR_RXRDY))
recv_data = 0;
else
recv_data = inb(com->data_port);
#ifdef KDB
#ifdef ALT_BREAK_TO_DEBUGGER
if (com->unit == comconsole &&
kdb_alt_break(recv_data, &com->alt_brk_state) != 0)
kdb_enter("Break sequence on console");
#endif /* ALT_BREAK_TO_DEBUGGER */
#endif /* KDB */
if (line_status & (LSR_BI | LSR_FE | LSR_PE)) {
/*
* Don't store BI if IGNBRK or FE/PE if IGNPAR.
* Otherwise, push the work to a higher level
* (to handle PARMRK) if we're bypassing.
* Otherwise, convert BI/FE and PE+INPCK to 0.
*
* This makes bypassing work right in the
* usual "raw" case (IGNBRK set, and IGNPAR
* and INPCK clear).
*
* Note: BI together with FE/PE means just BI.
*/
if (line_status & LSR_BI) {
#if defined(KDB) && defined(BREAK_TO_DEBUGGER)
if (com->unit == comconsole) {
kdb_enter("Line break on console");
goto cont;
}
#endif
if (com->tp == NULL
|| com->tp->t_iflag & IGNBRK)
goto cont;
} else {
if (com->tp == NULL
|| com->tp->t_iflag & IGNPAR)
goto cont;
}
if (com->tp->t_state & TS_CAN_BYPASS_L_RINT
&& (line_status & (LSR_BI | LSR_FE)
|| com->tp->t_iflag & INPCK))
recv_data = 0;
}
++com->bytes_in;
if (com->tp != NULL &&
com->tp->t_hotchar != 0 && recv_data == com->tp->t_hotchar)
swi_sched(sio_fast_ih, 0);
ioptr = com->iptr;
if (ioptr >= com->ibufend)
CE_RECORD(com, CE_INTERRUPT_BUF_OVERFLOW);
else {
if (com->tp != NULL && com->tp->t_do_timestamp)
microtime(&com->tp->t_timestamp);
++com_events;
swi_sched(sio_slow_ih, SWI_DELAY);
#if 0 /* for testing input latency vs efficiency */
if (com->iptr - com->ibuf == 8)
swi_sched(sio_fast_ih, 0);
#endif
ioptr[0] = recv_data;
ioptr[com->ierroff] = line_status;
com->iptr = ++ioptr;
if (ioptr == com->ihighwater
&& com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port,
com->mcr_image &= ~MCR_RTS);
if (line_status & LSR_OE)
CE_RECORD(com, CE_OVERRUN);
}
cont:
if (line_status & LSR_TXRDY
&& com->state >= (CS_BUSY | CS_TTGO | CS_ODEVREADY))
goto txrdy;
/*
* "& 0x7F" is to avoid the gcc-1.40 generating a slow
* jump from the top of the loop to here
*/
line_status = inb(com->line_status_port) & 0x7F;
}
/* modem status change? (always check before doing output) */
modem_status = inb(com->modem_status_port);
if (modem_status != com->last_modem_status) {
/*
* Schedule high level to handle DCD changes. Note
* that we don't use the delta bits anywhere. Some
* UARTs mess them up, and it's easy to remember the
* previous bits and calculate the delta.
*/
com->last_modem_status = modem_status;
if (!(com->state & CS_CHECKMSR)) {
com_events += LOTS_OF_EVENTS;
com->state |= CS_CHECKMSR;
swi_sched(sio_fast_ih, 0);
}
/* handle CTS change immediately for crisp flow ctl */
if (com->state & CS_CTS_OFLOW) {
if (modem_status & MSR_CTS)
com->state |= CS_ODEVREADY;
else
com->state &= ~CS_ODEVREADY;
}
}
txrdy:
/* output queued and everything ready? */
if (line_status & LSR_TXRDY
&& com->state >= (CS_BUSY | CS_TTGO | CS_ODEVREADY)) {
ioptr = com->obufq.l_head;
if (com->tx_fifo_size > 1 && com->unit != siotsunit) {
u_int ocount;
ocount = com->obufq.l_tail - ioptr;
if (ocount > com->tx_fifo_size)
ocount = com->tx_fifo_size;
com->bytes_out += ocount;
do
outb(com->data_port, *ioptr++);
while (--ocount != 0);
} else {
outb(com->data_port, *ioptr++);
++com->bytes_out;
if (com->unit == siotsunit
&& siotso < sizeof siots / sizeof siots[0])
nanouptime(&siots[siotso++]);
}
com->obufq.l_head = ioptr;
if (COM_IIR_TXRDYBUG(com->flags))
int_ctl_new = int_ctl | IER_ETXRDY;
if (ioptr >= com->obufq.l_tail) {
struct lbq *qp;
qp = com->obufq.l_next;
qp->l_queued = FALSE;
qp = qp->l_next;
if (qp != NULL) {
com->obufq.l_head = qp->l_head;
com->obufq.l_tail = qp->l_tail;
com->obufq.l_next = qp;
} else {
/* output just completed */
if (COM_IIR_TXRDYBUG(com->flags))
int_ctl_new = int_ctl
& ~IER_ETXRDY;
com->state &= ~CS_BUSY;
}
if (!(com->state & CS_ODONE)) {
com_events += LOTS_OF_EVENTS;
com->state |= CS_ODONE;
/* handle at high level ASAP */
swi_sched(sio_fast_ih, 0);
}
}
if (COM_IIR_TXRDYBUG(com->flags)
&& int_ctl != int_ctl_new)
outb(com->int_ctl_port, int_ctl_new);
}
/* finished? */
#ifndef COM_MULTIPORT
if ((inb(com->int_id_port) & IIR_IMASK) == IIR_NOPEND)
#endif /* COM_MULTIPORT */
return;
}
}
/* software interrupt handler for SWI_TTY */
static void
siopoll(void *dummy)
{
int unit;
if (com_events == 0)
return;
repeat:
for (unit = 0; unit < sio_numunits; ++unit) {
struct com_s *com;
int incc;
struct tty *tp;
com = com_addr(unit);
if (com == NULL)
continue;
tp = com->tp;
if (tp == NULL || com->gone) {
/*
* Discard any events related to never-opened or
* going-away devices.
*/
mtx_lock_spin(&sio_lock);
incc = com->iptr - com->ibuf;
com->iptr = com->ibuf;
if (com->state & CS_CHECKMSR) {
incc += LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
}
com_events -= incc;
mtx_unlock_spin(&sio_lock);
continue;
}
if (com->iptr != com->ibuf) {
mtx_lock_spin(&sio_lock);
sioinput(com);
mtx_unlock_spin(&sio_lock);
}
if (com->state & CS_CHECKMSR) {
u_char delta_modem_status;
mtx_lock_spin(&sio_lock);
delta_modem_status = com->last_modem_status
^ com->prev_modem_status;
com->prev_modem_status = com->last_modem_status;
com_events -= LOTS_OF_EVENTS;
com->state &= ~CS_CHECKMSR;
mtx_unlock_spin(&sio_lock);
if (delta_modem_status & MSR_DCD)
ttyld_modem(tp,
com->prev_modem_status & MSR_DCD);
}
if (com->state & CS_ODONE) {
mtx_lock_spin(&sio_lock);
com_events -= LOTS_OF_EVENTS;
com->state &= ~CS_ODONE;
mtx_unlock_spin(&sio_lock);
if (!(com->state & CS_BUSY)
&& !(com->extra_state & CSE_BUSYCHECK)) {
timeout(siobusycheck, com, hz / 100);
com->extra_state |= CSE_BUSYCHECK;
}
ttyld_start(tp);
}
if (com_events == 0)
break;
}
if (com_events >= LOTS_OF_EVENTS)
goto repeat;
}
static void
combreak(tp, sig)
struct tty *tp;
int sig;
{
struct com_s *com;
com = tp->t_sc;
if (sig)
sio_setreg(com, com_cfcr, com->cfcr_image |= CFCR_SBREAK);
else
sio_setreg(com, com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
}
static int
comparam(tp, t)
struct tty *tp;
struct termios *t;
{
u_int cfcr;
int cflag;
struct com_s *com;
u_int divisor;
u_char dlbh;
u_char dlbl;
u_char efr_flowbits;
int s;
com = tp->t_sc;
if (com == NULL)
return (ENODEV);
/* check requested parameters */
if (t->c_ispeed != (t->c_ospeed != 0 ? t->c_ospeed : tp->t_ospeed))
return (EINVAL);
divisor = siodivisor(com->rclk, t->c_ispeed);
if (divisor == 0)
return (EINVAL);
/* parameters are OK, convert them to the com struct and the device */
s = spltty();
if (t->c_ospeed == 0)
(void)commodem(tp, 0, SER_DTR); /* hang up line */
else
(void)commodem(tp, SER_DTR, 0);
cflag = t->c_cflag;
switch (cflag & CSIZE) {
case CS5:
cfcr = CFCR_5BITS;
break;
case CS6:
cfcr = CFCR_6BITS;
break;
case CS7:
cfcr = CFCR_7BITS;
break;
default:
cfcr = CFCR_8BITS;
break;
}
if (cflag & PARENB) {
cfcr |= CFCR_PENAB;
if (!(cflag & PARODD))
cfcr |= CFCR_PEVEN;
}
if (cflag & CSTOPB)
cfcr |= CFCR_STOPB;
if (com->hasfifo) {
/*
* Use a fifo trigger level low enough so that the input
* latency from the fifo is less than about 16 msec and
* the total latency is less than about 30 msec. These
* latencies are reasonable for humans. Serial comms
* protocols shouldn't expect anything better since modem
* latencies are larger.
*
* The fifo trigger level cannot be set at RX_HIGH for high
* speed connections without further work on reducing
* interrupt disablement times in other parts of the system,
* without producing silo overflow errors.
*/
com->fifo_image = com->unit == siotsunit ? 0
: t->c_ispeed <= 4800
? FIFO_ENABLE : FIFO_ENABLE | FIFO_RX_MEDH;
#ifdef COM_ESP
/*
* The Hayes ESP card needs the fifo DMA mode bit set
* in compatibility mode. If not, it will interrupt
* for each character received.
*/
if (com->esp)
com->fifo_image |= FIFO_DMA_MODE;
#endif
sio_setreg(com, com_fifo, com->fifo_image);
}
/*
* This returns with interrupts disabled so that we can complete
* the speed change atomically. Keeping interrupts disabled is
* especially important while com_data is hidden.
*/
(void) siosetwater(com, t->c_ispeed);
sio_setreg(com, com_cfcr, cfcr | CFCR_DLAB);
/*
* Only set the divisor registers if they would change, since on
* some 16550 incompatibles (UMC8669F), setting them while input
* is arriving loses sync until data stops arriving.
*/
dlbl = divisor & 0xFF;
if (sio_getreg(com, com_dlbl) != dlbl)
sio_setreg(com, com_dlbl, dlbl);
dlbh = divisor >> 8;
if (sio_getreg(com, com_dlbh) != dlbh)
sio_setreg(com, com_dlbh, dlbh);
efr_flowbits = 0;
if (cflag & CRTS_IFLOW) {
com->state |= CS_RTS_IFLOW;
efr_flowbits |= EFR_AUTORTS;
/*
* If CS_RTS_IFLOW just changed from off to on, the change
* needs to be propagated to MCR_RTS. This isn't urgent,
* so do it later by calling comstart() instead of repeating
* a lot of code from comstart() here.
*/
} else if (com->state & CS_RTS_IFLOW) {
com->state &= ~CS_RTS_IFLOW;
/*
* CS_RTS_IFLOW just changed from on to off. Force MCR_RTS
* on here, since comstart() won't do it later.
*/
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
/*
* Set up state to handle output flow control.
* XXX - worth handling MDMBUF (DCD) flow control at the lowest level?
* Now has 10+ msec latency, while CTS flow has 50- usec latency.
*/
com->state |= CS_ODEVREADY;
com->state &= ~CS_CTS_OFLOW;
if (cflag & CCTS_OFLOW) {
com->state |= CS_CTS_OFLOW;
efr_flowbits |= EFR_AUTOCTS;
if (!(com->last_modem_status & MSR_CTS))
com->state &= ~CS_ODEVREADY;
}
if (com->st16650a) {
sio_setreg(com, com_lcr, LCR_EFR_ENABLE);
sio_setreg(com, com_efr,
(sio_getreg(com, com_efr)
& ~(EFR_AUTOCTS | EFR_AUTORTS)) | efr_flowbits);
}
sio_setreg(com, com_cfcr, com->cfcr_image = cfcr);
/* XXX shouldn't call functions while intrs are disabled. */
ttyldoptim(tp);
mtx_unlock_spin(&sio_lock);
splx(s);
comstart(tp);
if (com->ibufold != NULL) {
free(com->ibufold, M_DEVBUF);
com->ibufold = NULL;
}
return (0);
}
/*
* This function must be called with the sio_lock mutex released and will
* return with it obtained.
*/
static int
siosetwater(com, speed)
struct com_s *com;
speed_t speed;
{
int cp4ticks;
u_char *ibuf;
int ibufsize;
struct tty *tp;
/*
* Make the buffer size large enough to handle a softtty interrupt
* latency of about 2 ticks without loss of throughput or data
* (about 3 ticks if input flow control is not used or not honoured,
* but a bit less for CS5-CS7 modes).
*/
cp4ticks = speed / 10 / hz * 4;
for (ibufsize = 128; ibufsize < cp4ticks;)
ibufsize <<= 1;
if (ibufsize == com->ibufsize) {
mtx_lock_spin(&sio_lock);
return (0);
}
/*
* Allocate input buffer. The extra factor of 2 in the size is
* to allow for an error byte for each input byte.
*/
ibuf = malloc(2 * ibufsize, M_DEVBUF, M_NOWAIT);
if (ibuf == NULL) {
mtx_lock_spin(&sio_lock);
return (ENOMEM);
}
/* Initialize non-critical variables. */
com->ibufold = com->ibuf;
com->ibufsize = ibufsize;
tp = com->tp;
if (tp != NULL) {
tp->t_ififosize = 2 * ibufsize;
tp->t_ispeedwat = (speed_t)-1;
tp->t_ospeedwat = (speed_t)-1;
}
/*
* Read current input buffer, if any. Continue with interrupts
* disabled.
*/
mtx_lock_spin(&sio_lock);
if (com->iptr != com->ibuf)
sioinput(com);
/*-
* Initialize critical variables, including input buffer watermarks.
* The external device is asked to stop sending when the buffer
* exactly reaches high water, or when the high level requests it.
* The high level is notified immediately (rather than at a later
* clock tick) when this watermark is reached.
* The buffer size is chosen so the watermark should almost never
* be reached.
* The low watermark is invisibly 0 since the buffer is always
* emptied all at once.
*/
com->iptr = com->ibuf = ibuf;
com->ibufend = ibuf + ibufsize;
com->ierroff = ibufsize;
com->ihighwater = ibuf + 3 * ibufsize / 4;
return (0);
}
static void
comstart(tp)
struct tty *tp;
{
struct com_s *com;
int s;
com = tp->t_sc;
if (com == NULL)
return;
s = spltty();
mtx_lock_spin(&sio_lock);
if (tp->t_state & TS_TTSTOP)
com->state &= ~CS_TTGO;
else
com->state |= CS_TTGO;
if (tp->t_state & TS_TBLOCK) {
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
} else {
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater
&& com->state & CS_RTS_IFLOW)
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
}
mtx_unlock_spin(&sio_lock);
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) {
ttwwakeup(tp);
splx(s);
return;
}
if (tp->t_outq.c_cc != 0) {
struct lbq *qp;
struct lbq *next;
if (!com->obufs[0].l_queued) {
com->obufs[0].l_tail
= com->obuf1 + q_to_b(&tp->t_outq, com->obuf1,
sizeof com->obuf1);
com->obufs[0].l_next = NULL;
com->obufs[0].l_queued = TRUE;
mtx_lock_spin(&sio_lock);
if (com->state & CS_BUSY) {
qp = com->obufq.l_next;
while ((next = qp->l_next) != NULL)
qp = next;
qp->l_next = &com->obufs[0];
} else {
com->obufq.l_head = com->obufs[0].l_head;
com->obufq.l_tail = com->obufs[0].l_tail;
com->obufq.l_next = &com->obufs[0];
com->state |= CS_BUSY;
}
mtx_unlock_spin(&sio_lock);
}
if (tp->t_outq.c_cc != 0 && !com->obufs[1].l_queued) {
com->obufs[1].l_tail
= com->obuf2 + q_to_b(&tp->t_outq, com->obuf2,
sizeof com->obuf2);
com->obufs[1].l_next = NULL;
com->obufs[1].l_queued = TRUE;
mtx_lock_spin(&sio_lock);
if (com->state & CS_BUSY) {
qp = com->obufq.l_next;
while ((next = qp->l_next) != NULL)
qp = next;
qp->l_next = &com->obufs[1];
} else {
com->obufq.l_head = com->obufs[1].l_head;
com->obufq.l_tail = com->obufs[1].l_tail;
com->obufq.l_next = &com->obufs[1];
com->state |= CS_BUSY;
}
mtx_unlock_spin(&sio_lock);
}
tp->t_state |= TS_BUSY;
}
mtx_lock_spin(&sio_lock);
if (com->state >= (CS_BUSY | CS_TTGO))
siointr1(com); /* fake interrupt to start output */
mtx_unlock_spin(&sio_lock);
ttwwakeup(tp);
splx(s);
}
static void
comstop(tp, rw)
struct tty *tp;
int rw;
{
struct com_s *com;
com = tp->t_sc;
if (com == NULL || com->gone)
return;
mtx_lock_spin(&sio_lock);
if (rw & FWRITE) {
if (com->hasfifo)
#ifdef COM_ESP
/* XXX avoid h/w bug. */
if (!com->esp)
#endif
sio_setreg(com, com_fifo,
FIFO_XMT_RST | com->fifo_image);
com->obufs[0].l_queued = FALSE;
com->obufs[1].l_queued = FALSE;
if (com->state & CS_ODONE)
com_events -= LOTS_OF_EVENTS;
com->state &= ~(CS_ODONE | CS_BUSY);
com->tp->t_state &= ~TS_BUSY;
}
if (rw & FREAD) {
if (com->hasfifo)
#ifdef COM_ESP
/* XXX avoid h/w bug. */
if (!com->esp)
#endif
sio_setreg(com, com_fifo,
FIFO_RCV_RST | com->fifo_image);
com_events -= (com->iptr - com->ibuf);
com->iptr = com->ibuf;
}
mtx_unlock_spin(&sio_lock);
comstart(tp);
}
static int
commodem(struct tty *tp, int sigon, int sigoff)
{
struct com_s *com;
int bitand, bitor, msr;
com = tp->t_sc;
if (com->gone)
return(0);
if (sigon != 0 || sigoff != 0) {
bitand = bitor = 0;
if (sigoff & SER_DTR)
bitand |= MCR_DTR;
if (sigoff & SER_RTS)
bitand |= MCR_RTS;
if (sigon & SER_DTR)
bitor |= MCR_DTR;
if (sigon & SER_RTS)
bitor |= MCR_RTS;
bitand = ~bitand;
mtx_lock_spin(&sio_lock);
com->mcr_image &= bitand;
com->mcr_image |= bitor;
outb(com->modem_ctl_port, com->mcr_image);
mtx_unlock_spin(&sio_lock);
return (0);
} else {
bitor = 0;
if (com->mcr_image & MCR_DTR)
bitor |= SER_DTR;
if (com->mcr_image & MCR_RTS)
bitor |= SER_RTS;
msr = com->prev_modem_status;
if (msr & MSR_CTS)
bitor |= SER_CTS;
if (msr & MSR_DCD)
bitor |= SER_DCD;
if (msr & MSR_DSR)
bitor |= SER_DSR;
if (msr & MSR_DSR)
bitor |= SER_DSR;
if (msr & (MSR_RI | MSR_TERI))
bitor |= SER_RI;
return (bitor);
}
}
static void
siosettimeout()
{
struct com_s *com;
bool_t someopen;
int unit;
/*
* Set our timeout period to 1 second if no polled devices are open.
* Otherwise set it to max(1/200, 1/hz).
* Enable timeouts iff some device is open.
*/
untimeout(comwakeup, (void *)NULL, sio_timeout_handle);
sio_timeout = hz;
someopen = FALSE;
for (unit = 0; unit < sio_numunits; ++unit) {
com = com_addr(unit);
if (com != NULL && com->tp != NULL
&& com->tp->t_state & TS_ISOPEN && !com->gone) {
someopen = TRUE;
if (com->poll || com->poll_output) {
sio_timeout = hz > 200 ? hz / 200 : 1;
break;
}
}
}
if (someopen) {
sio_timeouts_until_log = hz / sio_timeout;
sio_timeout_handle = timeout(comwakeup, (void *)NULL,
sio_timeout);
} else {
/* Flush error messages, if any. */
sio_timeouts_until_log = 1;
comwakeup((void *)NULL);
untimeout(comwakeup, (void *)NULL, sio_timeout_handle);
}
}
static void
comwakeup(chan)
void *chan;
{
struct com_s *com;
int unit;
sio_timeout_handle = timeout(comwakeup, (void *)NULL, sio_timeout);
/*
* Recover from lost output interrupts.
* Poll any lines that don't use interrupts.
*/
for (unit = 0; unit < sio_numunits; ++unit) {
com = com_addr(unit);
if (com != NULL && !com->gone
&& (com->state >= (CS_BUSY | CS_TTGO) || com->poll)) {
mtx_lock_spin(&sio_lock);
siointr1(com);
mtx_unlock_spin(&sio_lock);
}
}
/*
* Check for and log errors, but not too often.
*/
if (--sio_timeouts_until_log > 0)
return;
sio_timeouts_until_log = hz / sio_timeout;
for (unit = 0; unit < sio_numunits; ++unit) {
int errnum;
com = com_addr(unit);
if (com == NULL)
continue;
if (com->gone)
continue;
for (errnum = 0; errnum < CE_NTYPES; ++errnum) {
u_int delta;
u_long total;
mtx_lock_spin(&sio_lock);
delta = com->delta_error_counts[errnum];
com->delta_error_counts[errnum] = 0;
mtx_unlock_spin(&sio_lock);
if (delta == 0)
continue;
total = com->error_counts[errnum] += delta;
log(LOG_ERR, "sio%d: %u more %s%s (total %lu)\n",
unit, delta, error_desc[errnum],
delta == 1 ? "" : "s", total);
}
}
}
/*
* Following are all routines needed for SIO to act as console
*/
struct siocnstate {
u_char dlbl;
u_char dlbh;
u_char ier;
u_char cfcr;
u_char mcr;
};
/*
* This is a function in order to not replicate "ttyd%d" more
* places than absolutely necessary.
*/
static void
siocnset(struct consdev *cd, int unit)
{
cd->cn_unit = unit;
sprintf(cd->cn_name, "ttyd%d", unit);
}
static speed_t siocngetspeed(Port_t, u_long rclk);
static void siocnclose(struct siocnstate *sp, Port_t iobase);
static void siocnopen(struct siocnstate *sp, Port_t iobase, int speed);
static void siocntxwait(Port_t iobase);
static cn_probe_t sio_cnprobe;
static cn_init_t sio_cninit;
static cn_term_t sio_cnterm;
static cn_getc_t sio_cngetc;
static cn_putc_t sio_cnputc;
CONSOLE_DRIVER(sio);
static void
siocntxwait(iobase)
Port_t iobase;
{
int timo;
/*
* Wait for any pending transmission to finish. Required to avoid
* the UART lockup bug when the speed is changed, and for normal
* transmits.
*/
timo = 100000;
while ((inb(iobase + com_lsr) & (LSR_TSRE | LSR_TXRDY))
!= (LSR_TSRE | LSR_TXRDY) && --timo != 0)
;
}
/*
* Read the serial port specified and try to figure out what speed
* it's currently running at. We're assuming the serial port has
* been initialized and is basicly idle. This routine is only intended
* to be run at system startup.
*
* If the value read from the serial port doesn't make sense, return 0.
*/
static speed_t
siocngetspeed(iobase, rclk)
Port_t iobase;
u_long rclk;
{
u_int divisor;
u_char dlbh;
u_char dlbl;
u_char cfcr;
cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | cfcr);
dlbl = inb(iobase + com_dlbl);
dlbh = inb(iobase + com_dlbh);
outb(iobase + com_cfcr, cfcr);
divisor = dlbh << 8 | dlbl;
/* XXX there should be more sanity checking. */
if (divisor == 0)
return (CONSPEED);
return (rclk / (16UL * divisor));
}
static void
siocnopen(sp, iobase, speed)
struct siocnstate *sp;
Port_t iobase;
int speed;
{
u_int divisor;
u_char dlbh;
u_char dlbl;
/*
* Save all the device control registers except the fifo register
* and set our default ones (cs8 -parenb speed=comdefaultrate).
* We can't save the fifo register since it is read-only.
*/
sp->ier = inb(iobase + com_ier);
outb(iobase + com_ier, 0); /* spltty() doesn't stop siointr() */
siocntxwait(iobase);
sp->cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS);
sp->dlbl = inb(iobase + com_dlbl);
sp->dlbh = inb(iobase + com_dlbh);
/*
* Only set the divisor registers if they would change, since on
* some 16550 incompatibles (Startech), setting them clears the
* data input register. This also reduces the effects of the
* UMC8669F bug.
*/
divisor = siodivisor(comdefaultrclk, speed);
dlbl = divisor & 0xFF;
if (sp->dlbl != dlbl)
outb(iobase + com_dlbl, dlbl);
dlbh = divisor >> 8;
if (sp->dlbh != dlbh)
outb(iobase + com_dlbh, dlbh);
outb(iobase + com_cfcr, CFCR_8BITS);
sp->mcr = inb(iobase + com_mcr);
/*
* We don't want interrupts, but must be careful not to "disable"
* them by clearing the MCR_IENABLE bit, since that might cause
* an interrupt by floating the IRQ line.
*/
outb(iobase + com_mcr, (sp->mcr & MCR_IENABLE) | MCR_DTR | MCR_RTS);
}
static void
siocnclose(sp, iobase)
struct siocnstate *sp;
Port_t iobase;
{
/*
* Restore the device control registers.
*/
siocntxwait(iobase);
outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS);
if (sp->dlbl != inb(iobase + com_dlbl))
outb(iobase + com_dlbl, sp->dlbl);
if (sp->dlbh != inb(iobase + com_dlbh))
outb(iobase + com_dlbh, sp->dlbh);
outb(iobase + com_cfcr, sp->cfcr);
/*
* XXX damp oscillations of MCR_DTR and MCR_RTS by not restoring them.
*/
outb(iobase + com_mcr, sp->mcr | MCR_DTR | MCR_RTS);
outb(iobase + com_ier, sp->ier);
}
static void
sio_cnprobe(cp)
struct consdev *cp;
{
speed_t boot_speed;
u_char cfcr;
u_int divisor;
int s, unit;
struct siocnstate sp;
/*
* Find our first enabled console, if any. If it is a high-level
* console device, then initialize it and return successfully.
* If it is a low-level console device, then initialize it and
* return unsuccessfully. It must be initialized in both cases
* for early use by console drivers and debuggers. Initializing
* the hardware is not necessary in all cases, since the i/o
* routines initialize it on the fly, but it is necessary if
* input might arrive while the hardware is switched back to an
* uninitialized state. We can't handle multiple console devices
* yet because our low-level routines don't take a device arg.
* We trust the user to set the console flags properly so that we
* don't need to probe.
*/
cp->cn_pri = CN_DEAD;
for (unit = 0; unit < 16; unit++) { /* XXX need to know how many */
int flags;
if (resource_disabled("sio", unit))
continue;
if (resource_int_value("sio", unit, "flags", &flags))
continue;
if (COM_CONSOLE(flags) || COM_DEBUGGER(flags)) {
int port;
Port_t iobase;
if (resource_int_value("sio", unit, "port", &port))
continue;
iobase = port;
s = spltty();
if (boothowto & RB_SERIAL) {
boot_speed =
siocngetspeed(iobase, comdefaultrclk);
if (boot_speed)
comdefaultrate = boot_speed;
}
/*
* Initialize the divisor latch. We can't rely on
* siocnopen() to do this the first time, since it
* avoids writing to the latch if the latch appears
* to have the correct value. Also, if we didn't
* just read the speed from the hardware, then we
* need to set the speed in hardware so that
* switching it later is null.
*/
cfcr = inb(iobase + com_cfcr);
outb(iobase + com_cfcr, CFCR_DLAB | cfcr);
divisor = siodivisor(comdefaultrclk, comdefaultrate);
outb(iobase + com_dlbl, divisor & 0xff);
outb(iobase + com_dlbh, divisor >> 8);
outb(iobase + com_cfcr, cfcr);
siocnopen(&sp, iobase, comdefaultrate);
splx(s);
if (COM_CONSOLE(flags) && !COM_LLCONSOLE(flags)) {
siocnset(cp, unit);
cp->cn_pri = COM_FORCECONSOLE(flags)
|| boothowto & RB_SERIAL
? CN_REMOTE : CN_NORMAL;
siocniobase = iobase;
siocnunit = unit;
}
#ifdef GDB
if (COM_DEBUGGER(flags))
siogdbiobase = iobase;
#endif
}
}
}
static void
sio_cninit(cp)
struct consdev *cp;
{
comconsole = cp->cn_unit;
}
static void
sio_cnterm(cp)
struct consdev *cp;
{
comconsole = -1;
}
static int
sio_cngetc(struct consdev *cd)
{
int c;
Port_t iobase;
int s;
struct siocnstate sp;
speed_t speed;
if (cd != NULL && cd->cn_unit == siocnunit) {
iobase = siocniobase;
speed = comdefaultrate;
} else {
#ifdef GDB
iobase = siogdbiobase;
speed = gdbdefaultrate;
#else
return (-1);
#endif
}
s = spltty();
siocnopen(&sp, iobase, speed);
if (inb(iobase + com_lsr) & LSR_RXRDY)
c = inb(iobase + com_data);
else
c = -1;
siocnclose(&sp, iobase);
splx(s);
return (c);
}
static void
sio_cnputc(struct consdev *cd, int c)
{
int need_unlock;
int s;
struct siocnstate sp;
Port_t iobase;
speed_t speed;
if (cd != NULL && cd->cn_unit == siocnunit) {
iobase = siocniobase;
speed = comdefaultrate;
} else {
#ifdef GDB
iobase = siogdbiobase;
speed = gdbdefaultrate;
#else
return;
#endif
}
s = spltty();
need_unlock = 0;
if (!kdb_active && sio_inited == 2 && !mtx_owned(&sio_lock)) {
mtx_lock_spin(&sio_lock);
need_unlock = 1;
}
siocnopen(&sp, iobase, speed);
siocntxwait(iobase);
outb(iobase + com_data, c);
siocnclose(&sp, iobase);
if (need_unlock)
mtx_unlock_spin(&sio_lock);
splx(s);
}
/*
* Remote gdb(1) support.
*/
#if defined(GDB)
#include <gdb/gdb.h>
static gdb_probe_f siogdbprobe;
static gdb_init_f siogdbinit;
static gdb_term_f siogdbterm;
static gdb_getc_f siogdbgetc;
static gdb_putc_f siogdbputc;
GDB_DBGPORT(sio, siogdbprobe, siogdbinit, siogdbterm, siogdbgetc, siogdbputc);
static int
siogdbprobe(void)
{
return ((siogdbiobase != 0) ? 0 : -1);
}
static void
siogdbinit(void)
{
}
static void
siogdbterm(void)
{
}
static void
siogdbputc(int c)
{
sio_cnputc(NULL, c);
}
static int
siogdbgetc(void)
{
return (sio_cngetc(NULL));
}
#endif
Reference in New Issue View Git Blame Copy Permalink