freebsd-dev/sys/dev/siba/siba_pcib.c
Warner Losh 767b32095f Use some casting to get the right addresses. This is likely unwise
code, but will be OK until there's a 64-bit siba...

With this change, SENTRY5 kernel now compiles for mips, the last of
the holdouts.
2008-09-26 05:40:56 +00:00

434 lines
12 KiB
C

/*-
* Copyright (c) 2007 Bruce M. Simpson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Child driver for PCI host bridge core.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/malloc.h>
#include <sys/endian.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_extern.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/pcb.h>
#include <machine/pmap.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
#include "pcib_if.h"
#include <dev/siba/sibavar.h>
#include <dev/siba/sibareg.h>
#include <dev/siba/siba_ids.h>
#include <dev/siba/siba_pcibvar.h>
#ifndef MIPS_MEM_RID
#define MIPS_MEM_RID 0x20
#endif
#define SBPCI_SLOTMAX 15
#define SBPCI_READ_4(sc, reg) \
bus_space_write_4((sc)->sc_bt, (sc)->sc_bh, (reg))
#define SBPCI_WRITE_4(sc, reg, val) \
bus_space_write_4((sc)->sc_bt, (sc)->sc_bh, (reg), (val))
/*
* PCI Configuration space window (64MB).
* contained in SBTOPCI1 window.
*/
#define SBPCI_CFGBASE 0x0C000000
#define SBPCI_CFGSIZE 0x01000000
#define SBPCI_SBTOPCI0 0x100
#define SBPCI_SBTOPCI1 0x104
#define SBPCI_SBTOPCI2 0x108
/*
* TODO: implement type 1 config space access (ie beyond bus 0)
* we may need to tweak the windows to do this
* TODO: interrupt routing.
* TODO: fully implement bus allocation.
* TODO: implement resource managers.
* TODO: code cleanup.
*/
static int siba_pcib_activate_resource(device_t, device_t, int,
int, struct resource *);
static struct resource *
siba_pcib_alloc_resource(device_t, device_t, int, int *,
u_long , u_long, u_long, u_int);
static int siba_pcib_attach(device_t);
static int siba_pcib_deactivate_resource(device_t, device_t, int,
int, struct resource *);
static int siba_pcib_maxslots(device_t);
static int siba_pcib_probe(device_t);
static u_int32_t
siba_pcib_read_config(device_t, u_int, u_int, u_int, u_int,
int);
static int siba_pcib_read_ivar(device_t, device_t, int, uintptr_t *);
static int siba_pcib_release_resource(device_t, device_t, int, int,
struct resource *);
static int siba_pcib_route_interrupt(device_t, device_t, int);
static int siba_pcib_setup_intr(device_t, device_t, struct resource *,
int, driver_filter_t *, driver_intr_t *, void *, void **);
static int siba_pcib_teardown_intr(device_t, device_t, struct resource *,
void *);
static void siba_pcib_write_config(device_t, u_int, u_int, u_int, u_int,
u_int32_t, int);
static int siba_pcib_write_ivar(device_t, device_t, int, uintptr_t);
static int
siba_pcib_probe(device_t dev)
{
/* TODO: support earlier cores. */
/* TODO: Check if PCI host mode is enabled in the SPROM. */
if (siba_get_vendor(dev) == SIBA_VID_BROADCOM &&
siba_get_device(dev) == SIBA_DEVID_PCI) {
device_set_desc(dev, "SiBa-to-PCI host bridge");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
//extern int rman_debug;
static int
siba_pcib_attach(device_t dev)
{
struct siba_pcib_softc *sc = device_get_softc(dev);
int rid;
/*
* Allocate the resources which the parent bus has already
* determined for us.
*/
rid = MIPS_MEM_RID; /* XXX */
//rman_debug = 1;
sc->sc_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->sc_mem == NULL) {
device_printf(dev, "unable to allocate memory\n");
return (ENXIO);
}
sc->sc_bt = rman_get_bustag(sc->sc_mem);
sc->sc_bh = rman_get_bushandle(sc->sc_mem);
device_printf(dev, "bridge registers addr 0x%08x vaddr %p\n",
(uint32_t)sc->sc_bh, rman_get_virtual(sc->sc_mem));
SBPCI_WRITE_4(sc, 0x0000, 0x05);
SBPCI_WRITE_4(sc, 0x0000, 0x0D);
DELAY(150);
SBPCI_WRITE_4(sc, 0x0000, 0x0F);
SBPCI_WRITE_4(sc, 0x0010, 0x01);
DELAY(1);
bus_space_handle_t sc_cfg_hand;
int error;
/*
* XXX this doesn't actually do anything on mips; however... should
* we not be mapping to KSEG1? we need to wire down the range.
*/
error = bus_space_map(sc->sc_bt, SBPCI_CFGBASE, SBPCI_CFGSIZE,
0, &sc_cfg_hand);
if (error) {
device_printf(dev, "cannot map PCI configuration space\n");
return (ENXIO);
}
device_printf(dev, "mapped pci config space at 0x%08x\n",
(uint32_t)sc_cfg_hand);
/*
* Setup configuration, io, and dma space windows.
* XXX we need to be able to do type 1 too.
* we probably don't need to be able to do i/o cycles.
*/
SBPCI_WRITE_4(sc, SBPCI_SBTOPCI0, 1); /* I/O read/write window */
SBPCI_WRITE_4(sc, SBPCI_SBTOPCI1, 2); /* type 0 configuration only */
SBPCI_WRITE_4(sc, SBPCI_SBTOPCI2, 1 << 30); /* memory only */
DELAY(500);
/* XXX resource managers */
device_add_child(dev, "pci", -1);
return (bus_generic_attach(dev));
}
/* bus functions */
static int
siba_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct siba_pcib_softc *sc;
sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
*result = sc->sc_bus;
return (0);
}
return (ENOENT);
}
static int
siba_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct siba_pcib_softc *sc;
sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
sc->sc_bus = value;
return (0);
}
return (ENOENT);
}
static int
siba_pcib_setup_intr(device_t dev, device_t child, struct resource *ires,
int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg,
void **cookiep)
{
return (BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
filt, intr, arg, cookiep));
}
static int
siba_pcib_teardown_intr(device_t dev, device_t child, struct resource *vec,
void *cookie)
{
return (BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec, cookie));
}
static struct resource *
siba_pcib_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
#if 1
//device_printf(bus, "%s: not yet implemented\n", __func__);
return (NULL);
#else
bus_space_tag_t tag;
struct siba_pcib_softc *sc = device_get_softc(bus);
struct rman *rmanp;
struct resource *rv;
tag = 0;
rv = NULL;
switch (type) {
case SYS_RES_IRQ:
rmanp = &sc->sc_irq_rman;
break;
case SYS_RES_MEMORY:
rmanp = &sc->sc_mem_rman;
tag = &sc->sc_pci_memt;
break;
default:
return (rv);
}
rv = rman_reserve_resource(rmanp, start, end, count, flags, child);
if (rv != NULL) {
rman_set_rid(rv, *rid);
if (type == SYS_RES_MEMORY) {
#if 0
rman_set_bustag(rv, tag);
rman_set_bushandle(rv, rman_get_bushandle(sc->sc_mem) +
(rman_get_start(rv) - IXP425_PCI_MEM_HWBASE));
#endif
}
}
return (rv);
#endif
}
static int
siba_pcib_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
device_printf(bus, "%s: not yet implemented\n", __func__);
device_printf(bus, "%s called activate_resource\n",
device_get_nameunit(child));
return (ENXIO);
}
static int
siba_pcib_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
device_printf(bus, "%s: not yet implemented\n", __func__);
device_printf(bus, "%s called deactivate_resource\n",
device_get_nameunit(child));
return (ENXIO);
}
static int
siba_pcib_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
device_printf(bus, "%s: not yet implemented\n", __func__);
device_printf(bus, "%s called release_resource\n",
device_get_nameunit(child));
return (ENXIO);
}
/* pcib interface functions */
static int
siba_pcib_maxslots(device_t dev)
{
return (SBPCI_SLOTMAX);
}
/*
* This needs hacking and fixery. It is currently broke and hangs.
* Debugging it will be tricky; there seems to be no way to enable
* a target abort which would cause a nice target abort.
* Look at linux again?
*/
static u_int32_t
siba_pcib_read_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, int bytes)
{
struct siba_pcib_softc *sc = device_get_softc(dev);
bus_addr_t cfgaddr;
uint32_t cfgtag;
uint32_t val;
/* XXX anything higher than slot 2 currently seems to hang the bus.
* not sure why this is; look at linux again
*/
if (bus != 0 || slot > 2) {
printf("%s: bad b/s/f %d/%d/%d\n", __func__, bus, slot, func);
return 0xffffffff; // XXX
}
device_printf(dev, "requested %d bytes from b/s/f %d/%d/%d reg %d\n",
bytes, bus, slot, func, reg);
/*
* The configuration tag on the broadcom is weird.
*/
SBPCI_WRITE_4(sc, SBPCI_SBTOPCI1, 2); /* XXX again??? */
cfgtag = ((1 << slot) << 16) | (func << 8);
cfgaddr = SBPCI_CFGBASE | cfgtag | (reg & ~3);
/* cfg space i/o is always 32 bits on this bridge */
printf("reading 4 bytes from %08x\n", cfgaddr);
val = *(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(cfgaddr); /* XXX MIPS */
val = bswap32(val); /* XXX seems to be needed for now */
/* swizzle and return what was asked for */
val &= 0xffffffff >> ((4 - bytes) * 8);
return (val);
}
static void
siba_pcib_write_config(device_t dev, u_int bus, u_int slot,
u_int func, u_int reg, u_int32_t val, int bytes)
{
/* write to pci configuration space */
//device_printf(dev, "%s: not yet implemented\n", __func__);
}
static int
siba_pcib_route_interrupt(device_t bridge, device_t device, int pin)
{
//device_printf(bridge, "%s: not yet implemented\n", __func__);
return (-1);
}
static device_method_t siba_pcib_methods[] = {
/* Device interface */
DEVMETHOD(device_attach, siba_pcib_attach),
DEVMETHOD(device_probe, siba_pcib_probe),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, siba_pcib_read_ivar),
DEVMETHOD(bus_write_ivar, siba_pcib_write_ivar),
DEVMETHOD(bus_setup_intr, siba_pcib_setup_intr),
DEVMETHOD(bus_teardown_intr, siba_pcib_teardown_intr),
DEVMETHOD(bus_alloc_resource, siba_pcib_alloc_resource),
DEVMETHOD(bus_activate_resource, siba_pcib_activate_resource),
DEVMETHOD(bus_deactivate_resource, siba_pcib_deactivate_resource),
DEVMETHOD(bus_release_resource, siba_pcib_release_resource),
/* pcib interface */
DEVMETHOD(pcib_maxslots, siba_pcib_maxslots),
DEVMETHOD(pcib_read_config, siba_pcib_read_config),
DEVMETHOD(pcib_write_config, siba_pcib_write_config),
DEVMETHOD(pcib_route_interrupt, siba_pcib_route_interrupt),
{0, 0},
};
static driver_t siba_pcib_driver = {
"pcib",
siba_pcib_methods,
sizeof(struct siba_softc),
};
static devclass_t siba_pcib_devclass;
DRIVER_MODULE(siba_pcib, siba, siba_pcib_driver, siba_pcib_devclass, 0, 0);