freebsd-dev/sys/dev/sound/pcm/sound.h
2000-09-05 20:56:31 +00:00

181 lines
5.6 KiB
C

/*
* Copyright (c) 1999 Cameron Grant <gandalf@vilnya.demon.co.uk>
* Copyright by Hannu Savolainen 1995
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* first, include kernel header files.
*/
#ifndef _OS_H_
#define _OS_H_
#ifdef _KERNEL
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioccom.h>
#include <sys/filio.h>
#include <sys/sockio.h>
#include <sys/fcntl.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/kernel.h> /* for DATA_SET */
#include <sys/module.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/syslog.h>
#include <sys/errno.h>
#include <sys/malloc.h>
#include <sys/bus.h>
#if __FreeBSD_version > 500000
#include <sys/bio.h>
#endif
#include <sys/buf.h>
#include <machine/clock.h> /* for DELAY */
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/mman.h>
#include <sys/poll.h>
#include <sys/soundcard.h>
#include <isa/isavar.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#else
struct isa_device { int dummy; };
#define d_open_t void
#define d_close_t void
#define d_read_t void
#define d_write_t void
#define d_ioctl_t void
#define d_select_t void
#endif /* _KERNEL */
#endif /* _OS_H_ */
#include <dev/sound/pcm/datatypes.h>
#include <dev/sound/pcm/channel.h>
#include <dev/sound/pcm/feeder.h>
#include <dev/sound/pcm/mixer.h>
#include <dev/sound/pcm/dsp.h>
#ifndef ISADMA_WRITE
#define ISADMA_WRITE B_WRITE
#define ISADMA_READ B_READ
#define ISADMA_RAW B_RAW
#endif
#define PCM_MODVER 1
#define PCM_MINVER 1
#define PCM_PREFVER PCM_MODVER
#define PCM_MAXVER 1
#define MAGIC(unit) (0xa4d10de0 + unit)
#define SD_F_SIMPLEX 0x00000001
#define SD_F_PRIO_RD 0x10000000
#define SD_F_PRIO_WR 0x20000000
#define SD_F_PRIO_SET (SD_F_PRIO_RD | SD_F_PRIO_WR)
#define SD_F_DIR_SET 0x40000000
#define SD_F_TRANSIENT 0xf0000000
/* many variables should be reduced to a range. Here define a macro */
#define RANGE(var, low, high) (var) = \
(((var)<(low))? (low) : ((var)>(high))? (high) : (var))
#define DSP_BUFFSIZE (8192)
/* make figuring out what a format is easier. got AFMT_STEREO already */
#define AFMT_32BIT (AFMT_S32_LE | AFMT_S32_BE | AFMT_U32_LE | AFMT_U32_BE)
#define AFMT_16BIT (AFMT_S16_LE | AFMT_S16_BE | AFMT_U16_LE | AFMT_U16_BE)
#define AFMT_SIGNED (AFMT_S16_LE | AFMT_S16_BE | AFMT_S8)
#define AFMT_BIGENDIAN (AFMT_S16_BE | AFMT_U16_BE)
int fkchan_setup(pcm_channel *c);
/*
* Minor numbers for the sound driver.
*
* Unfortunately Creative called the codec chip of SB as a DSP. For this
* reason the /dev/dsp is reserved for digitized audio use. There is a
* device for true DSP processors but it will be called something else.
* In v3.0 it's /dev/sndproc but this could be a temporary solution.
*/
#define SND_DEV_CTL 0 /* Control port /dev/mixer */
#define SND_DEV_SEQ 1 /* Sequencer /dev/sequencer */
#define SND_DEV_MIDIN 2 /* Raw midi access */
#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
#define SND_DEV_STATUS 6 /* /dev/sndstat */
/* #7 not in use now. */
#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
#define SND_DEV_PSS SND_DEV_SNDPROC /* ? */
#define SND_DEV_NORESET 10
#define DSP_DEFAULT_SPEED 8000
#define ON 1
#define OFF 0
#ifdef _KERNEL
/*
* some macros for debugging purposes
* DDB/DEB to enable/disable debugging stuff
* BVDDB to enable debugging when bootverbose
*/
#define DDB(x) x /* XXX */
#define BVDDB(x) if (bootverbose) x
#ifndef DEB
#define DEB(x)
#endif
int pcm_addchan(device_t dev, int dir, pcm_channel *templ, void *devinfo);
int pcm_register(device_t dev, void *devinfo, int numplay, int numrec);
int pcm_unregister(device_t dev);
int pcm_setstatus(device_t dev, char *str);
u_int32_t pcm_getflags(device_t dev);
void pcm_setflags(device_t dev, u_int32_t val);
void *pcm_getdevinfo(device_t dev);
void pcm_setswap(device_t dev, pcm_swap_t *swap);
#endif /* _KERNEL */
/* usage of flags in device config entry (config file) */
#define DV_F_DRQ_MASK 0x00000007 /* mask for secondary drq */
#define DV_F_DUAL_DMA 0x00000010 /* set to use secondary dma channel */
/* ought to be made obsolete */
#define DV_F_DEV_MASK 0x0000ff00 /* force device type/class */
#define DV_F_DEV_SHIFT 8 /* force device type/class */