freebsd-dev/sys/pci
Bill Paul 0a75b55602 Pacify users who get all bent out of shape when they see the "xl%d: command
never completed" message. The RX reset takes longer complete than it
used to, a lot longer in fact than xl_wait() is prepared to wait.
When we do the RX reset in xl_reset(), this cases xl_wait() to time out
and whine. We wait a little extra time now after the RX reset, which
should silence the warning.

Thanks to obrien for finally getting me a box with a NIC that
causes this problem for me to tinker with.
2001-07-27 20:55:45 +00:00
..
agp_ali.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp_amd.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp_i810.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp_if.m A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
agp_intel.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp_sis.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp_via.c Make these compile again by adding proc.h include for GIANT_REQUIRED 2001-07-05 21:28:47 +00:00
agp.c Introduce a global lock for the vm subsystem (vm_mtx). 2001-05-19 01:28:09 +00:00
agppriv.h Add support for Intel's i810 chipset with integrated graphics. An 2000-07-12 10:13:07 +00:00
agpreg.h Add support for Intel's i810 chipset with integrated graphics. An 2000-07-12 10:13:07 +00:00
agpvar.h A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
alpm.c Remove unneeded (and compile-breaking) #include "alpm.h" 2001-01-17 00:38:06 +00:00
amd.c Move unused functions into #if 0 ... #endif. 2001-05-06 08:07:10 +00:00
amd.h Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
cy_pci.c Converted to new-bus. 2001-02-01 09:49:57 +00:00
cy_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
dc21040reg.h Remove some unused stuff 2001-03-25 07:21:04 +00:00
ide_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_dc.c Deal with the condition where we lose link in the middle of transmitting 2001-07-12 22:51:59 +00:00
if_dcreg.h Apply patch to allow TX underrun handling without issuing a complete 2001-02-22 19:26:55 +00:00
if_de.c Convert if_multiaddrs from LIST to TAILQ so that it can be traversed 2001-02-06 10:12:15 +00:00
if_devar.h Use bus_space for all register accesses. 2000-05-13 18:47:24 +00:00
if_en_pci.c newbusify the en atm driver. 2000-11-07 09:31:28 +00:00
if_fxp.c A better mousetrap: use device hints, as in: 2001-02-27 22:57:32 +00:00
if_fxpreg.h Add the PCI device ID for the on-board ethernet controllers on the 2000-09-21 20:01:57 +00:00
if_fxpvar.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_mn.c Fix warnings: 2001-06-15 07:39:12 +00:00
if_pcn.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_pcnreg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_rl.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_rlreg.h Big round of minor updates: 2001-02-21 20:54:22 +00:00
if_sf.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_sfreg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_sis.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_sisreg.h Big round of minor updates: 2001-02-21 20:54:22 +00:00
if_sk.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_skreg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_ste.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_stereg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_ti.c IFT_8021_VLAN -> IFT_L2VLAN per if_vlan_var.h rev 1.9. With this change 2001-07-25 00:19:59 +00:00
if_tireg.h Fix the definitions for memory bank sizes, which I somehow got wrong. 2001-04-26 16:40:45 +00:00
if_tl.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_tlreg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_tx.c Add initializetion of NVCTL register with EEPROM stored value. 2001-06-23 19:30:26 +00:00
if_txvar.h Add initializetion of NVCTL register with EEPROM stored value. 2001-06-23 19:30:26 +00:00
if_vr.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_vrreg.h Close PR 22208: bring chip out of suspend mode, because Windows might 2001-05-14 19:13:02 +00:00
if_wb.c Apply patch supplied by Jonathan Chen: use the correct arguments to 2001-07-09 17:58:42 +00:00
if_wbreg.h Change and clean the mutex lock interface. 2001-02-09 06:11:45 +00:00
if_wx.c Several things: 2001-04-09 21:54:15 +00:00
if_wxreg.h Pick up changes from Parag Patel and Kachun Lee, and self: 2001-04-09 21:47:11 +00:00
if_wxvar.h Add in MII support for LICENGOOD copper part (10/100/1000). Add in some 2001-04-09 21:48:50 +00:00
if_xl.c Pacify users who get all bent out of shape when they see the "xl%d: command 2001-07-27 20:55:45 +00:00
if_xlreg.h Close PR #27742: allow the xl driver to receive VLAN tagged frames by 2001-05-31 22:08:45 +00:00
intpm.c Fix warning: 2001-06-15 07:42:58 +00:00
intpmreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
locate.pl use warnings 2000-06-27 22:41:12 +00:00
meteor_reg.h Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
meteor.c Send the remains (such as I have located) of "block major numbers" to 2001-03-26 12:41:29 +00:00
ncr.c s/adress/address/ 2001-07-23 12:05:27 +00:00
ncrreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ohci_pci.c Set vendor string correctly for the Apple KeyLargo. 2001-07-05 12:04:19 +00:00
scsiiom.c Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
simos.c Convert more malloc+bzero to malloc+M_ZERO. 2000-12-08 21:51:06 +00:00
simos.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ti_fw2.h Use a custom Tigon 2 firmware image, hopefully temporarily. This is 2000-07-26 23:55:34 +00:00
ti_fw.h Update the Tigon driver to support 1000baseTX gigE over copper AceNIC 2000-07-20 22:24:43 +00:00
uhci_pci.c Add description for 82801BA controller. 2001-05-21 01:24:14 +00:00
xmaciireg.h Reoganize/update the SysKonnect driver: 2000-04-22 02:16:41 +00:00
xrpu.c Send the remains (such as I have located) of "block major numbers" to 2001-03-26 12:41:29 +00:00