freebsd-dev/release/Makefile
Jordan K. Hubbard d50a30076c Multiple changes stacked as one commit since they all depend on one another.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now.  Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later.  This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted.  Now we generate the symbol file in
release.8.

Second, add Poul-Henning's USERCONFIG_BOOT changes.  These have two
effects:

	1. Userconfig is always entered, rather than only after a -c
	   (don't scream yet, it's not as bad as it sounds).

	2. Userconfig reads a message string which can optionally be
	   written just past the boot blocks.  This string "preloads"
	   the userconfig input buffer and is parsed as user input.
	   If the first command is not "USERCONFIG", userconfig will
	   treat this as an implied "quit" (which is why you don't need
	   to scream - you never even know you went through userconfig
	   and back out again if you don't specifically ask for it),
	   otherwise it will read and execute the following commands
	   until a "quit" is seen or the end is reached, in which case
	   the normal userconfig command prompt will then be presented.

  How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):

	% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO


Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched.  The default
boot.flp startup sequence is now, in fact, this:

	USERCONFIG
	intro
	visual

(Since visual never returns, we don't need a following "quit").

Submitted-By: phk & jkh
1996-10-05 10:44:07 +00:00

593 lines
19 KiB
Makefile

# $Id: Makefile,v 1.242 1996/10/05 07:46:54 jkh Exp $
#
# How to roll a release:
#
# make release CHROOTDIR=<lots of disk> [ RELEASETAG=something ]
#
# As far as I know, this will roll everything nicely into the "stage"
# directory. I still need to write the two rules to move that into
# the "cdrom" and "ftp" directories.
# I also need to "make ports" and install those, but I'm not going to do
# that on a 14.4 line just yet...
#
# SET THIS !!!
#BUILDNAME=2.2-960501-SNAP
#CHROOTDIR=/junk/release
# If this is a RELEASE, then set
#RELEASETAG=RELENG_2_1_0
# Things which without too much trouble can be considered variables
EXPORT_DISTS= games manpages proflibs dict info doc
EXTRA_DISTS= krb des ${EXPORT_DISTS}
ALL_DISTS= bin ${EXTRA_DISTS}
KERNELS?= GENERIC
# Extra source tarballs; each argument is a pair of source dir and
# distribution name. The dist name should not exceed 7 characters
# (another "s" for "source" will be prepended).
EXTRA_SRC+= usr.sbin/sendmail/cf smailcf
BOOT1= etc/protocols etc/sysconfig
# mountpoint for filesystems.
MNT= /mnt
# other floppy parameters.
FDSIZE= 1200
FDLABEL= fd1200
ZIPNSPLIT= gzip --no-name -9 -c | split -b 240640 -
# Upper size for the mfs in the boot.flp kernel.
# These are adjusted down to the minimum needed by doFS.sh.
BOOTMFSSIZE= 1200
MFSINODE= 42000
# Things which will get you into trouble if you change them
DISTRIBUTIONS= bin ${EXTRA_DISTS}
MTREEFILES= ${.CURDIR}/../etc/mtree
RD= ${RELEASEDIR}/stage
FD= ${RELEASEDIR}/ftp
CD= ${RELEASEDIR}/cdrom
.if !defined(WHICH_CRUNCH)
WHICH_CRUNCH= boot fixit
.endif
REDO?= sysinstall
REDOSED= sed -e 's/dirs/release.1/' -e 's/trees/release.2/' \
-e 's/kerns/release.3/' -e 's/sysinstall/release.4/' \
-e 's/fixup/release.5/' -e 's/tarbin/release.6/' \
-e 's/tarsrc/release.7/' -e 's/boot\.flp/release.8/' \
-e 's/fixit\.flp/release.9/' -e 's/ftp/ftp.1/' \
-e 's/cdrom/cdrom.1/'
REDOREDO!= echo ${REDO} | ${REDOSED}
rerelease release:
.if !defined(CHROOTDIR) || !defined(BUILDNAME)
@echo "To make a release you must set CHROOTDIR and BUILDNAME" && false
.endif
.if make(release)
.if exists(${CHROOTDIR})
chflags -R noschg ${CHROOTDIR}/.
-rm -rf ${CHROOTDIR}
.endif
-mkdir -p ${CHROOTDIR}
cd ${.CURDIR}/../etc && ${MAKE} distrib-dirs DESTDIR=${CHROOTDIR}
cd ${.CURDIR}/../etc && ${MAKE} distribution DESTDIR=${CHROOTDIR}
cd ${.CURDIR}/.. && ${MAKE} install DESTDIR=${CHROOTDIR}
.if !defined(RELEASETAG)
cd ${CHROOTDIR}/usr && rm -rf src && \
cvs -d ${CVSROOT} co -P src
.if defined(INTCVSROOT)
cd ${CHROOTDIR}/usr && \
cvs -d ${INTCVSROOT} co -P src/secure src/eBones
.endif
.else
cd ${CHROOTDIR}/usr && rm -rf src && \
cvs co -d ${CVSROOT} -P -r ${RELEASETAG} src
.if defined(INTCVSROOT)
cd ${CHROOTDIR}/usr && \
cvs -d ${INTCVSROOT} co -P -r ${RELEASETAG} src/secure src/eBones
.endif
.endif
.if defined(LOCAL_PATCHES) && exists(${LOCAL_PATCHES})
cd ${CHROOTDIR}/usr/src && patch --silent < ${LOCAL_PATCHES}
.endif
.endif
.if make(rerelease)
.if !defined(RELEASENOUPDATE)
.if !defined(RELEASETAG)
cd ${CHROOTDIR}/usr/src && cvs -q update -P -d
.else
cd ${CHROOTDIR}/usr/src && cvs -q update -P -d -r ${RELEASETAG}
.endif
.endif
.endif
( cd ${CHROOTDIR}/usr/src/sys/conf && \
mv newvers.sh foo && \
sed "s/^RELEASE=.*/RELEASE=${BUILDNAME}/" foo > newvers.sh&& rm foo )
( cd ${CHROOTDIR}/usr/src/release/sysinstall && \
sed "s/__RELEASE/${BUILDNAME}/" version.h > version.h.new && \
mv version.h.new version.h && \
echo XXXX )
-test -f install.cfg && cp install.cfg ${CHROOTDIR}/usr/src/release
echo "#!/bin/sh" > ${CHROOTDIR}/mk
echo "set -ex" >> ${CHROOTDIR}/mk
echo "CFLAGS='-O2 -pipe'" >> ${CHROOTDIR}/mk
echo "export CFLAGS" >> ${CHROOTDIR}/mk
echo "RELEASEDIR=/R" >> ${CHROOTDIR}/mk
echo "export RELEASEDIR" >> ${CHROOTDIR}/mk
echo "cd /usr/src" >> ${CHROOTDIR}/mk
.if make(release)
echo "make world" >> ${CHROOTDIR}/mk
.endif
.if make(rerelease)
echo "make all install" >> ${CHROOTDIR}/mk
.endif
echo "cd /usr/src/release" >> ${CHROOTDIR}/mk
echo "make obj OBJLINK=yes" >> ${CHROOTDIR}/mk
echo "cd obj" >> ${CHROOTDIR}/mk
echo "rm -f ${REDOREDO}" >> ${CHROOTDIR}/mk
echo "cd /usr/src/release" >> ${CHROOTDIR}/mk
echo "make doRELEASE" >> ${CHROOTDIR}/mk
echo "echo make ${.TARGET} Finished" >> ${CHROOTDIR}/mk
chmod 755 ${CHROOTDIR}/mk
chroot ${CHROOTDIR} /mk
whap:
( cd ${CHROOTDIR}/usr/src/release/sysinstall && \
sed "s/__RELEASE/${BUILDNAME}/" version.h > version.h.new && mv version.h.new version.h )
clean:
rm -rf boot_crunch release.[0-9] release.1[0]
# Clean out ${RELEASEDIR} and make the directory structure.
release.1:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
-mkdir ${RELEASEDIR}
chflags -R noschg ${RELEASEDIR}/.
rm -rf ${RELEASEDIR}/*
mkdir ${RD}
mkdir ${RD}/floppies
mkdir ${RD}/trees
mkdir ${RD}/dists
mkdir ${RD}/kernels
for i in ${ALL_DISTS} ; do \
mkdir ${RD}/trees/$$i && \
mkdir ${RD}/dists/$$i && \
mtree -deU -f ${MTREEFILES}/BSD.root.dist \
-p ${RD}/trees/$$i > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.usr.dist \
-p ${RD}/trees/$$i/usr > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.include.dist \
-p ${RD}/trees/$$i/usr/include > /dev/null && \
mtree -deU -f ${MTREEFILES}/BSD.var.dist \
-p ${RD}/trees/$$i/var > /dev/null ; \
done
touch release.1
# Install the system into the various distributions.
release.2:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
cd ${.CURDIR}/../etc && make distrib-dirs DESTDIR=${RD}/trees/bin
cd ${.CURDIR}/.. && make distribute DISTDIR=${RD}/trees
.if exists(${.CURDIR}/../eBones)
cd ${.CURDIR}/../eBones && ( \
make bootstrap &&\
make obj all help-distribute DISTDIR=${RD}/trees &&\
make kprog \
)
.endif
chflags -R noschg ${RD}/trees
touch release.2
# Make and install the generic kernel(s).
release.3:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
.for kernel in ${KERNELS}
rm -f ${RD}/kernels/${kernel}
rm -rf ${.CURDIR}/../sys/compile/${kernel}
cd ${.CURDIR} && ${MAKE} doKERNEL KERNEL=${kernel}
rm -rf ${.CURDIR}/../sys/compile/${kernel}
ln -f ${RD}/kernels/${kernel} ${RD}/trees/bin/kernel.${kernel}
.endfor
touch release.3
# Make and install the three crunched binaries which live on the floppies.
# You are not supposed to like this :-)
release.4:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
cd ${.CURDIR}/sysinstall && make depend all
rm -rf ${RD}/crunch
mkdir -p ${RD}/crunch
for j in ${WHICH_CRUNCH} ; do \
rm -rf $${j}_crunch && \
mkdir $${j}_crunch && \
( cd $${j}_crunch && \
crunchgen ${.CURDIR}/$${j}_crunch.conf && \
${MAKE} -f $${j}_crunch.mk all NOCRYPT=yes \
"CFLAGS=${CFLAGS} -DCRUNCHED_BINARY") && \
mv $${j}_crunch/$${j}_crunch ${RD}/crunch/$${j} && \
true || rm -rf $${j}_crunch ; \
done
touch release.4
#
# --==## Fix up the distributions. ##==--
#
release.5:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
# Handle some grief caused by the ammunition braindeadness.
for i in sbin/init bin/ed ; do \
( cd ${.CURDIR}/../$$i; \
make -DNOCRYPT clean all distribute DISTDIR=${RD}/trees ) ; \
done
# Move all the manpages out to their own dist
if [ -d ${RD}/trees/bin/usr/share/man ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/man . | \
tar xf - -C ${RD}/trees/manpages/usr/share/man && \
rm -rf ${RD}/trees/bin/usr/share/man; \
fi
# Move all the games out to their own dist
if [ -d ${RD}/trees/bin/usr/games ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/games . | \
tar -xf - -C ${RD}/trees/games/usr/games && \
rm -rf ${RD}/trees/bin/usr/games; \
fi
if [ -d ${RD}/trees/bin/usr/share/games ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/games . | \
tar -xf - -C ${RD}/trees/games/usr/share/games && \
rm -rf ${RD}/trees/bin/usr/share/games; \
fi
if [ -d ${RD}/trees/bin/var/games ] ; then \
tar -cf - -C ${RD}/trees/bin/var/games . | \
tar -xf - -C ${RD}/trees/games/var/games && \
rm -rf ${RD}/trees/bin/var/games; \
fi
# Move the dict out to their own dist
if [ -d ${RD}/trees/bin/usr/share/dict ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/dict . | \
tar -xf - -C ${RD}/trees/dict/usr/share/dict && \
rm -rf ${RD}/trees/bin/usr/share/dict; \
fi
for i in airport birthtoken flowers na.phone zipcodes ; do \
if [ -f ${RD}/trees/bin/usr/share/misc/$$i ] ; then \
mv ${RD}/trees/bin/usr/share/misc/$$i \
${RD}/trees/dict/usr/share/misc; \
fi ; \
done
# Move the info files out to their own dist
if [ -d ${RD}/trees/bin/usr/share/info ] ; then \
tar -cf - -C ${RD}/trees/bin/usr/share/info . | \
tar -xf - -C ${RD}/trees/info/usr/share/info && \
rm -rf ${RD}/trees/bin/usr/share/info; \
fi
# Move the profiled libraries out to their own dist
for i in ${RD}/trees/bin/usr/lib/*_p.a ; do \
if [ -f $$i ] ; then \
mv $$i \
${RD}/trees/proflibs/usr/lib ; \
fi ; \
done
# Create symlinks for the MD5-based crypt lib, too. The
# automatically created links still point to the DES stuff,
# which went into its own distribution.
for i in ${RD}/trees/bin/usr/lib/libscrypt* ; do \
c=`echo $$i | sed -e 's/libscrypt/libcrypt/'` ; \
rm -f $$c ; \
ln -s `basename $$i` $$c ; \
done
# Remove some files we can faster regen after installing.
cd ${RD}/trees/bin/usr/share/misc && rm -f termcap.db vgrindefs.db
# Remove all the directories we don't need.
-cd ${RD}/trees && \
find ${EXTRA_DISTS} -depth -type d -print | xargs rmdir
touch release.5
#
# --==## Make binary dists ##==--
#
release.6:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/dists
mkdir -p ${RD}/dists
@for i in ${DISTRIBUTIONS} ; \
do \
if [ -d ${RD}/trees/$${i} ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
SD=${RD}/trees/$${i} \
TN=$$i TD=$$i ARG="." && \
echo "$${i} distribution is finished."; \
fi ; \
done
( cd ${RD}/dists && \
if [ -f krb/krb.aa ] ; then mv krb/* des && rmdir krb ; fi )
touch release.6
#
# --==## Make source dists ##==--
#
release.7:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
@cd ${.CURDIR} && $(MAKE) doTARBALL SD=/usr/src \
TD=src TN=sbase ARG="[A-Z]*"
@for i in `cd /usr/src && echo [a-z]*` ; do \
if [ -d /usr/src/$$i ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
TN=`echo s$$i | tr -d '.' | sed 's/usr/u/'` \
SD=/usr/src TD=src ARG="$$i" ; \
fi ; \
done
.if defined(EXTRA_SRC)
@set ${EXTRA_SRC} && \
while [ $$# -ge 2 ] ; do \
if [ -d /usr/src/$$1 ] ; then \
cd ${.CURDIR} && $(MAKE) doTARBALL \
SD=/usr/src TN="s$$2" TD=src ARG="$$1" ; \
fi && shift && shift ; \
done
.endif
( cd ${RD}/dists/src && \
if [ -f ssecure.aa ] ; then mv ssecure.* ../des ; fi && \
if [ -f sebones.aa ] ; then mv sebones.* ../des ; fi && \
if [ -f ssecure.inf ] ; then mv ssecure.inf ../des ; fi && \
if [ -f sebones.inf ] ; then mv sebones.inf ../des ; fi ; )
@echo "src distribution is finished."
touch release.7
# Complete the bootfd
#
# Now, just to get this picture down once and for all:
#
# +------------------------------------------------------------------------+
# |boot.flp |
# +-----+-----+------------------------------------------------------------+
# |boot1|boot2|floppy filesystem "bootfd" |
# +-----+-----+-+--------------------------------------------------------+-+
# |kernel |
# +------------+-----------------------------------------+-+
# |mfs filesystem "mfsfd" |
# +-----------------------------------------+
#
release.8: write_mfs_in_kernel dumpnlist
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/mfsfd
mkdir ${RD}/mfsfd
cd ${RD}/mfsfd && \
mkdir -p dev mnt stand/help
@cd ${.CURDIR} && $(MAKE) installCRUNCH CRUNCH=boot \
DIR=${RD}/mfsfd/stand ZIP=false
( cd ${RD}/trees/bin/dev && \
ls console tty ttyv0 ttyv1 ttyv2 ttyv3 null zero \
*[sw]d* cuaa[01] cuaa[23] fd[01] rfd[01] \
cd0a mcd0a scd0a matcd0a wcd0c rst0 rft0 rwt0 | \
cpio -dump ${RD}/mfsfd/dev )
( cd ${RD}/mfsfd/dev && rm -f *[sw]d*[bdefgh] )
cd ${RD}/trees/bin && ls ${BOOT1} | cpio -dump ${RD}/mfsfd/stand
echo "nameserver 42/tcp name" > ${RD}/mfsfd/stand/etc/services
echo "ftp 21/tcp" >> ${RD}/mfsfd/stand/etc/services
echo "domain 53/tcp nameserver" >> ${RD}/mfsfd/stand/etc/services
echo "domain 53/udp nameserver" >> ${RD}/mfsfd/stand/etc/services
gzip -c ${.CURDIR}/../COPYRIGHT > ${RD}/mfsfd/stand/help/COPYRIGHT.hlp.gz
-test -f ${.CURDIR}/install.cfg && cp ${.CURDIR}/install.cfg ${RD}/mfsfd
./dumpnlist ${RD}/kernels/BOOTMFS.std > ${RD}/mfsfd/stand/symbols
# make the small bootfd
@echo "Making the small 4MB boot floppy."
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${BOOTMFSSIZE} ${RD}/mfsfd \
${MFSINODE} minimum
mv fs-image fs-image.4
mv fs-image.size fs-image.4.size
# add more stuff for the complete bootfd
@echo "Making the regular boot floppy."
tar --exclude CVS -cf - -C ${.CURDIR}/sysinstall help | \
tar xvf - -C ${RD}/mfsfd/stand
@echo "Compressing doc files..."
@gzip -9 ${RD}/mfsfd/stand/help/*.hlp
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${BOOTMFSSIZE} ${RD}/mfsfd \
${MFSINODE} minimum
mv fs-image fs-image.std
mv fs-image.size fs-image.std.size
cd ${.CURDIR} && ${MAKE} doMFSKERN FSIMAGE=4
cd ${.CURDIR} && ${MAKE} doMFSKERN FSIMAGE=std
mv ${RD}/floppies/bootstd.flp ${RD}/floppies/boot.flp
@echo "Regular boot floppy made."
touch release.8
#
# --==## Create a fixit floppy ##==--
#
release.9:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -rf ${RD}/fixitfd
mkdir ${RD}/fixitfd
cd ${RD}/fixitfd && \
mkdir dev stand bin sbin etc mnt mnt1 mnt2 mnt3 mnt4 tmp
@cd ${.CURDIR} && $(MAKE) installCRUNCH CRUNCH=fixit \
DIR=${RD}/fixitfd/stand ZIP=true
( cd ${RD}/fixitfd/dev && \
cp ${RD}/trees/bin/dev/MAKEDEV . && \
sh MAKEDEV all )
cp ${RD}/trees/bin/etc/spwd.db ${RD}/fixitfd/etc
cp ${.CURDIR}/fixit.profile ${RD}/fixitfd/.profile
sh -e ${.CURDIR}/doFS.sh ${RD} ${MNT} ${FDSIZE} ${RD}/fixitfd \
10000 ${FDLABEL}
mv fs-image ${RD}/floppies/fixit.flp
touch release.9
#
# --==## Setup a suitable ftp-area ##==--
#
ftp.1:
mkdir -p ${FD}
cd ${RD} && find floppies -print | cpio -dumpl ${FD}
cd ${RD}/dists && find . -print | cpio -dumpl ${FD}
cp ${.CURDIR}/sysinstall/help/readme.hlp ${FD}/README.TXT
cp ${.CURDIR}/sysinstall/help/hardware.hlp ${FD}/HARDWARE.TXT
cp ${.CURDIR}/sysinstall/help/install.hlp ${FD}/INSTALL.TXT
cp ${.CURDIR}/sysinstall/help/relnotes.hlp ${FD}/RELNOTES.TXT
#
# --==## Setup a suitable cdrom-area ##==--
#
cdrom.1:
mkdir -p ${CD}/filesys
cd ${RD} && find floppies -print | cpio -dumpl ${CD}
cd ${RD}/dists && find . -print | cpio -dumpl ${CD}
ln -f ${RD}/kernels/MFSKERNEL.std ${CD}/kernel
ln -f ${RD}/trees/bin/usr/mdec/fbsdboot.exe ${CD}
for i in ${DISTRIBUTIONS} ; \
do \
if [ -d ${RD}/trees/$${i} ] ; then \
( cd ${RD}/trees/$${i} && \
find . -depth -print | cpio -dumpl ${CD}/filesys ) ; \
fi \
done
echo "CD_VERSION = ${BUILDNAME}" > ${CD}/cdrom.inf
cp ${.CURDIR}/sysinstall/help/readme.hlp ${CD}/README.TXT
cp ${.CURDIR}/sysinstall/help/hardware.hlp ${CD}/HARDWARE.TXT
cp ${.CURDIR}/sysinstall/help/install.hlp ${CD}/INSTALL.TXT
cp ${.CURDIR}/sysinstall/help/relnotes.hlp ${CD}/RELNOTES.TXT
# Various "subroutine" and other supporting targets.
doTARBALL:
.if !defined(SD)
@echo "SD undefined in doTARBALL" && exit 1
.endif
.if !defined(TD)
@echo "TB undefined in doTARBALL" && exit 1
.endif
.if !defined(ARG)
@echo "ARG undefined in doTARBALL" && exit 1
.endif
rm -rf ${RD}/dists/${TD}/${TN}*
mkdir -p ${RD}/dists/${TD}
( cd ${SD} && \
tn=`echo ${TN} | tr '[A-Z]' '[a-z]' | cut -c1-8` && \
echo rolling ${TD}/$$tn tarball &&\
tar --exclude CVS --exclude obj -cf - ${ARG} | \
${ZIPNSPLIT} ${RD}/dists/${TD}/$$tn. && \
mkdir -p ${TD} && sh ${.CURDIR}/info.sh \
${RD}/dists/${TD}/$$tn > ${RD}/dists/${TD}/$$tn.inf && \
if [ -f ${.CURDIR}/scripts/$${TD}-install.sh ]; then \
cp -p ${.CURDIR}/scripts/$${TD}-install.sh ${RD}/dists/${TD}/install.sh; \
fi && \
if [ "${SD}" != "/usr/src" ]; then \
mtree -c -i -p ${SD}/${ARG} \
-k gname,md5digest,mode,nlink,uname,size,link,type \
> ${RD}/dists/${TD}/$$tn.mtree ; else true; fi )
doRELEASE: release.1 release.2 release.3 release.4 release.5 release.6 \
release.7 release.8 release.9
cd ${.CURDIR} && ${MAKE} cdrom.1 ftp.1
@echo "Release done"
floppies:
cd ${.CURDIR} && ${MAKE} boot.flp
cd ${.CURDIR} && ${MAKE} fixit.flp
cd ${RD} && find floppies -print | cpio -dumpl ${FD}
boot.flp:
rm -f release.4 release.8
cd ${.CURDIR} && ${MAKE} release.4 release.8 WHICH_CRUNCH=boot
fixit.flp:
rm -f release.4 release.9
cd ${.CURDIR} && ${MAKE} release.4 release.9 WHICH_CRUNCH=fixit
write_mfs_in_kernel: ${.CURDIR}/write_mfs_in_kernel.c
${CC} ${CFLAGS} -o write_mfs_in_kernel ${.CURDIR}/write_mfs_in_kernel.c
dumpnlist: ${.CURDIR}/dumpnlist.c
${CC} ${CFLAGS} -o dumpnlist ${.CURDIR}/dumpnlist.c
ckRELEASEDIR:
.if !defined(RELEASEDIR)
@echo "To make a release RELEASEDIR must be defined" && false
.endif
installCRUNCH:
.if !defined(CRUNCH)
@echo "CRUNCH undefined in installCRUNCH" && exit 1
.endif
.if !defined(DIR)
@echo "DIR undefined in installCRUNCH" && exit 1
.endif
.if !defined(ZIP)
@echo "ZIP undefined in installCRUNCH" && exit 1
.endif
if ${ZIP} ; then \
gzip -9 < ${RD}/crunch/${CRUNCH} > ${DIR}/${CRUNCH}_crunch ; \
else \
ln -f ${RD}/crunch/${CRUNCH} ${DIR}/${CRUNCH}_crunch ; \
fi
chmod 555 ${DIR}/${CRUNCH}_crunch
for i in `crunchgen -l ${.CURDIR}/${CRUNCH}_crunch.conf` ; do \
ln -f ${DIR}/${CRUNCH}_crunch ${DIR}/$$i ; \
done
#
# --==## Compile a kernel by name ${KERNEL} ##==--
#
# We don't erase the sys/compile/${KERNEL} directory, since somebody
# may want to reuse it (release.8 presently)
#
doKERNEL:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
rm -f ${RD}/kernels/${KERNEL}
cd ${.CURDIR}/../sys/i386/conf && config -n ${KERNEL}
cd ${.CURDIR}/../sys/compile/${KERNEL} && \
make depend && \
make kernel && \
cp kernel ${RD}/kernels/${KERNEL}
#
# --==## Put a filesystem into a BOOTMFS kernel ##==--
#
doMFSKERN:
@cd ${.CURDIR} && $(MAKE) ckRELEASEDIR
@rm -f ${RD}/kernels/BOOTMFS.${FSIMAGE}
@rm -f /sys/compile/BOOTMFS/mfs_vfsops.o
@cd ${.CURDIR}/../sys/i386/conf && \
sed -e '/SYSV/d' \
-e '/pty/d' \
-e '/PROCFS/d' \
-e '/KTRACE/d' \
-e 's/GENERIC/BOOTMFS/g' \
-e '/maxusers/s/10/4/' < GENERIC > BOOTMFS && \
echo "options MFS" >> BOOTMFS && \
echo "options NFS_NOSERVER" >> BOOTMFS && \
echo 'options "MAXCONS=4"' >> BOOTMFS && \
echo "options USERCONFIG_BOOT" >> BOOTMFS
@echo "options \"MFS_ROOT=`cat fs-image.${FSIMAGE}.size`\"" >> \
${.CURDIR}/../sys/i386/conf/BOOTMFS
cd ${.CURDIR} && ${MAKE} doKERNEL KERNEL=BOOTMFS
@rm -rf ${RD}/boot.${FSIMAGE}
@mkdir ${RD}/boot.${FSIMAGE}
@mv ${RD}/kernels/BOOTMFS ${RD}/kernels/BOOTMFS.${FSIMAGE}
@cp ${RD}/kernels/BOOTMFS.${FSIMAGE} ${RD}/boot.${FSIMAGE}/kernel
./write_mfs_in_kernel ${RD}/boot.${FSIMAGE}/kernel \
fs-image.${FSIMAGE}
kzip -v ${RD}/boot.${FSIMAGE}/kernel
@mv ${RD}/boot.${FSIMAGE}/kernel ${RD}/kernels/MFSKERNEL.${FSIMAGE}
@mv ${RD}/boot.${FSIMAGE}/kernel.kz ${RD}/boot.${FSIMAGE}/kernel
@ls -l ${RD}/boot.${FSIMAGE}/kernel
@rm -f ${RD}/floppies/boot${FSIMAGE}.flp
cat /usr/mdec/rawboot ${RD}/boot.${FSIMAGE}/kernel | \
dd conv=sync of=${RD}/floppies/boot${FSIMAGE}.flp
@echo 'USERCONFIG' > startup_foo
@echo 'intro' >> startup_foo
@echo 'visual' >> startup_foo
dd if=startup_foo of=${RD}/floppies/boot${FSIMAGE}.flp \
seek=1 bs=512 count=1 conv=sync
@rm -f startup_foo
.include <bsd.prog.mk>