freebsd-dev/sys/dev/ath/ath_hal/ar5312/ar5312_misc.c
2010-03-03 17:32:32 +00:00

169 lines
5.1 KiB
C

/*
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#include "opt_ah.h"
#ifdef AH_SUPPORT_AR5312
#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ar5312/ar5312.h"
#include "ar5312/ar5312reg.h"
#include "ar5312/ar5312phy.h"
#define AR_NUM_GPIO 6 /* 6 GPIO pins */
#define AR_GPIOD_MASK 0x0000002F /* GPIO data reg r/w mask */
/*
* Change the LED blinking pattern to correspond to the connectivity
*/
void
ar5312SetLedState(struct ath_hal *ah, HAL_LED_STATE state)
{
uint32_t val;
uint32_t resOffset = (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh));
if(IS_2316(ah)) return; /* not yet */
val = SM(AR5312_PCICFG_LEDSEL0, AR5312_PCICFG_LEDSEL) |
SM(AR5312_PCICFG_LEDMOD0, AR5312_PCICFG_LEDMODE) |
2;
OS_REG_WRITE(ah, resOffset+AR5312_PCICFG,
(OS_REG_READ(ah, AR5312_PCICFG) &~
(AR5312_PCICFG_LEDSEL | AR5312_PCICFG_LEDMODE |
AR5312_PCICFG_LEDSBR))
| val);
}
/*
* Detect if our wireless mac is present.
*/
HAL_BOOL
ar5312DetectCardPresent(struct ath_hal *ah)
{
uint16_t macVersion, macRev;
uint32_t v;
/*
* Read the Silicon Revision register and compare that
* to what we read at attach time. If the same, we say
* a card/device is present.
*/
#if (AH_SUPPORT_2316 || AH_SUPPORT_2317)
if(IS_5315(ah))
{
v = (OS_REG_READ(ah,
(AR5315_RSTIMER_BASE-((uint32_t) ah->ah_sh)) + AR5315_WREV))
& AR_SREV_ID;
macVersion = v >> AR_SREV_ID_S;
macRev = v & AR_SREV_REVISION;
return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
AH_PRIVATE(ah)->ah_macRev == macRev);
}
else
#endif
{
v = (OS_REG_READ(ah,
(AR5312_RSTIMER_BASE-((uint32_t) ah->ah_sh)) + AR5312_WREV))
& AR_SREV_ID;
macVersion = v >> AR_SREV_ID_S;
macRev = v & AR_SREV_REVISION;
return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
AH_PRIVATE(ah)->ah_macRev == macRev);
}
}
/*
* If 32KHz clock exists, use it to lower power consumption during sleep
*
* Note: If clock is set to 32 KHz, delays on accessing certain
* baseband registers (27-31, 124-127) are required.
*/
void
ar5312SetupClock(struct ath_hal *ah, HAL_OPMODE opmode)
{
if (ar5212Use32KHzclock(ah, opmode)) {
/*
* Enable clocks to be turned OFF in BB during sleep
* and also enable turning OFF 32MHz/40MHz Refclk
* from A2.
*/
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x0d);
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0c);
OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x03);
OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0x05);
OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
IS_RAD5112_ANY(ah) ? 0x14 : 0x18);
OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, 1);
OS_REG_WRITE(ah, AR_TSF_PARM, 61); /* 32 KHz TSF incr */
} else {
OS_REG_WRITE(ah, AR_TSF_PARM, 1); /* 32 MHz TSF incr */
OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
IS_RAD5112_ANY(ah) ? 39 : 31);
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x7f);
if (IS_5312_2_X(ah)) {
/* Set ADC/DAC select values */
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04);
} else {
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x0c);
OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0xff);
OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
IS_RAD5112_ANY(ah) ? 0x14 : 0x18);
}
}
}
/*
* If 32KHz clock exists, turn it off and turn back on the 32Mhz
*/
void
ar5312RestoreClock(struct ath_hal *ah, HAL_OPMODE opmode)
{
if (ar5212Use32KHzclock(ah, opmode)) {
/* # Set sleep clock rate back to 32 MHz. */
OS_REG_WRITE(ah, AR_TSF_PARM, 1); /* 32 MHz TSF incr */
OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
IS_RAD5112_ANY(ah) ? 39 : 31);
/*
* Restore BB registers to power-on defaults
*/
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x7f);
if (IS_5312_2_X(ah)) {
/* Set ADC/DAC select values */
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04);
} else {
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x0c);
OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0xff);
OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
IS_RAD5112_ANY(ah) ? 0x14 : 0x18);
}
}
}
#endif /* AH_SUPPORT_AR5312 */