freebsd-dev/lib/libc/sys/send.2
Mark Johnston bea2668321 Document handling of connection-mode sockets by sendto(2).
sendto(2), sendmsg(2) and sendmmsg(2) return ENOTCONN if a destination
address is specified and the socket is not connected and the socket
protocol does not automatically connect ("implied connect").  Document
that.  Also document the fact that the destination address is ignored
for connection-mode sockets if the socket is already connected.

PR:		245817
Submitted by:	Erik Inge Bolsø <knan-bfo@modirum.com>
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D24530
2020-04-27 16:12:32 +00:00

296 lines
7.8 KiB
Groff

.\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" From: @(#)send.2 8.2 (Berkeley) 2/21/94
.\" $FreeBSD$
.\"
.Dd April 27, 2020
.Dt SEND 2
.Os
.Sh NAME
.Nm send ,
.Nm sendto ,
.Nm sendmsg ,
.Nm sendmmsg
.Nd send message(s) from a socket
.Sh LIBRARY
.Lb libc
.Sh SYNOPSIS
.In sys/socket.h
.Ft ssize_t
.Fn send "int s" "const void *msg" "size_t len" "int flags"
.Ft ssize_t
.Fn sendto "int s" "const void *msg" "size_t len" "int flags" "const struct sockaddr *to" "socklen_t tolen"
.Ft ssize_t
.Fn sendmsg "int s" "const struct msghdr *msg" "int flags"
.Ft ssize_t
.Fn sendmmsg "int s" "struct mmsghdr * restrict msgvec" "size_t vlen" "int flags"
.Sh DESCRIPTION
The
.Fn send
and
.Fn sendmmsg
functions,
and
.Fn sendto
and
.Fn sendmsg
system calls
are used to transmit one or more messages (with the
.Fn sendmmsg
call) to
another socket.
The
.Fn send
function
may be used only when the socket is in a
.Em connected
state.
The functions
.Fn sendto ,
.Fn sendmsg
and
.Fn sendmmsg
may be used at any time if the socket is connectionless-mode.
If the socket is connection-mode, the protocol
must support implied connect (currently
.Xr tcp 4
is the only protocol with support) or the socket must be in a
connected state before use.
.Pp
The address of the target is given by
.Fa to
with
.Fa tolen
specifying its size, or the equivalent
.Fa msg_name
and
.Fa msg_namelen
in
.Fa struct msghdr .
If the socket is in a connected state, the target address passed to
.Fn sendto ,
.Fn sendmsg
or
.Fn sendmmsg
is ignored.
The length of the message is given by
.Fa len .
If the message is too long to pass atomically through the
underlying protocol, the error
.Er EMSGSIZE
is returned, and
the message is not transmitted.
.Pp
The
.Fn sendmmsg
function sends multiple messages at a call.
They are given by the
.Fa msgvec
vector along with
.Fa vlen
specifying the vector size.
The number of octets sent per each message is placed in the
.Fa msg_len
field of each processed element of the vector after transmission.
.Pp
No indication of failure to deliver is implicit in a
.Fn send .
Locally detected errors are indicated by a return value of -1.
.Pp
If no messages space is available at the socket to hold
the message to be transmitted, then
.Fn send
normally blocks, unless the socket has been placed in
non-blocking I/O mode.
The
.Xr select 2
system call may be used to determine when it is possible to
send more data.
.Pp
The
.Fa flags
argument may include one or more of the following:
.Bd -literal
#define MSG_OOB 0x00001 /* process out-of-band data */
#define MSG_DONTROUTE 0x00004 /* bypass routing, use direct interface */
#define MSG_EOR 0x00008 /* data completes record */
#define MSG_DONTWAIT 0x00080 /* do not block */
#define MSG_EOF 0x00100 /* data completes transaction */
#define MSG_NOSIGNAL 0x20000 /* do not generate SIGPIPE on EOF */
.Ed
.Pp
The flag
.Dv MSG_OOB
is used to send
.Dq out-of-band
data on sockets that support this notion (e.g.\&
.Dv SOCK_STREAM ) ;
the underlying protocol must also support
.Dq out-of-band
data.
.Dv MSG_EOR
is used to indicate a record mark for protocols which support the
concept.
The
.Dv MSG_DONTWAIT
flag request the call to return when it would block otherwise.
.Dv MSG_EOF
requests that the sender side of a socket be shut down, and that an
appropriate indication be sent at the end of the specified data;
this flag is only implemented for
.Dv SOCK_STREAM
sockets in the
.Dv PF_INET
protocol family.
.Dv MSG_DONTROUTE
is usually used only by diagnostic or routing programs.
.Dv MSG_NOSIGNAL
is used to prevent
.Dv SIGPIPE
generation when writing a socket that
may be closed.
.Pp
See
.Xr recv 2
for a description of the
.Fa msghdr
structure and the
.Fa mmsghdr
structure.
.Sh RETURN VALUES
The
.Fn send ,
.Fn sendto
and
.Fn sendmsg
calls
return the number of octets sent.
The
.Fn sendmmsg
call returns the number of messages sent.
If an error occurred a value of -1 is returned.
.Sh ERRORS
The
.Fn send
and
.Fn sendmmsg
functions and
.Fn sendto
and
.Fn sendmsg
system calls
fail if:
.Bl -tag -width Er
.It Bq Er EBADF
An invalid descriptor was specified.
.It Bq Er EACCES
The destination address is a broadcast address, and
.Dv SO_BROADCAST
has not been set on the socket.
.It Bq Er ENOTCONN
The socket is connection-mode but is not connected.
.It Bq Er ENOTSOCK
The argument
.Fa s
is not a socket.
.It Bq Er EFAULT
An invalid user space address was specified for an argument.
.It Bq Er EMSGSIZE
The socket requires that message be sent atomically,
and the size of the message to be sent made this impossible.
.It Bq Er EAGAIN
The socket is marked non-blocking, or
.Dv MSG_DONTWAIT
is specified, and the requested operation would block.
.It Bq Er ENOBUFS
The system was unable to allocate an internal buffer.
The operation may succeed when buffers become available.
.It Bq Er ENOBUFS
The output queue for a network interface was full.
This generally indicates that the interface has stopped sending,
but may be caused by transient congestion.
.It Bq Er EHOSTUNREACH
The remote host was unreachable.
.It Bq Er EISCONN
A destination address was specified and the socket is already connected.
.It Bq Er ECONNREFUSED
The socket received an ICMP destination unreachable message
from the last message sent.
This typically means that the
receiver is not listening on the remote port.
.It Bq Er EHOSTDOWN
The remote host was down.
.It Bq Er ENETDOWN
The remote network was down.
.It Bq Er EADDRNOTAVAIL
The process using a
.Dv SOCK_RAW
socket was jailed and the source
address specified in the IP header did not match the IP
address bound to the prison.
.It Bq Er EPIPE
The socket is unable to send anymore data
.Dv ( SBS_CANTSENDMORE
has been set on the socket).
This typically means that the socket
is not connected.
.El
.Sh SEE ALSO
.Xr connect 2 ,
.Xr fcntl 2 ,
.Xr getsockopt 2 ,
.Xr recv 2 ,
.Xr select 2 ,
.Xr socket 2 ,
.Xr write 2 ,
.Xr CMSG_DATA 3
.Sh HISTORY
The
.Fn send
function appeared in
.Bx 4.2 .
The
.Fn sendmmsg
function appeared in
.Fx 11.0 .
.Sh BUGS
Because
.Fn sendmsg
does not necessarily block until the data has been transferred, it
is possible to transfer an open file descriptor across an
.Dv AF_UNIX
domain socket
(see
.Xr recv 2 ) ,
then
.Fn close
it before it has actually been sent, the result being that the receiver
gets a closed file descriptor.
It is left to the application to
implement an acknowledgment mechanism to prevent this from happening.