1249680609
Using subshell's PORTSDIR variable (via $${PORTSDIR}}) seems to be
only working if PORTSDIR is specified directly on the make command
line.
Use ${PORTDIR} here instead so that setting the variable in
/etc/{make,src,src-env}.conf would work (also works for variable
being set on command line or in the environment).
PR: 268299
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D37868
474 lines
15 KiB
Makefile
474 lines
15 KiB
Makefile
# $FreeBSD$
|
|
|
|
# Part of a unified Makefile for building kernels. This part includes all
|
|
# the definitions that need to be after all the % directives except %RULES
|
|
# and ones that act like they are part of %RULES.
|
|
#
|
|
# Most make variables should not be defined in this file. Instead, they
|
|
# should be defined in the kern.pre.mk so that port makefiles can
|
|
# override or augment them.
|
|
|
|
.if defined(DTS) || defined(DTSO) || defined(FDT_DTS_FILE)
|
|
.include "dtb.build.mk"
|
|
|
|
KERNEL_EXTRA+= ${DTB} ${DTBO}
|
|
CLEAN+= ${DTB} ${DTBO}
|
|
|
|
kernel-install: _dtbinstall
|
|
.ORDER: beforeinstall _dtbinstall
|
|
.endif
|
|
|
|
# In case the config had a makeoptions DESTDIR...
|
|
.if defined(DESTDIR)
|
|
MKMODULESENV+= DESTDIR="${DESTDIR}"
|
|
.endif
|
|
SYSDIR?= ${S:C;^[^/];${.CURDIR}/&;:tA}
|
|
MKMODULESENV+= KERNBUILDDIR="${.CURDIR}" SYSDIR="${SYSDIR}"
|
|
MKMODULESENV+= MODULE_TIED=yes
|
|
|
|
.if defined(CONF_CFLAGS)
|
|
MKMODULESENV+= CONF_CFLAGS="${CONF_CFLAGS}"
|
|
.endif
|
|
|
|
.if defined(WITH_CTF)
|
|
MKMODULESENV+= WITH_CTF="${WITH_CTF}"
|
|
.endif
|
|
|
|
.if defined(WITH_EXTRA_TCP_STACKS)
|
|
MKMODULESENV+= WITH_EXTRA_TCP_STACKS="${WITH_EXTRA_TCP_STACKS}"
|
|
.endif
|
|
|
|
.if !empty(KCSAN_ENABLED)
|
|
MKMODULESENV+= KCSAN_ENABLED="yes"
|
|
.endif
|
|
|
|
.if defined(SAN_CFLAGS)
|
|
MKMODULESENV+= SAN_CFLAGS="${SAN_CFLAGS}"
|
|
.endif
|
|
|
|
.if defined(GCOV_CFLAGS)
|
|
MKMODULESENV+= GCOV_CFLAGS="${GCOV_CFLAGS}"
|
|
.endif
|
|
|
|
.if !empty(COMPAT_FREEBSD32_ENABLED)
|
|
MKMODULESENV+= COMPAT_FREEBSD32_ENABLED="yes"
|
|
.endif
|
|
|
|
# Allow overriding the kernel debug directory, so kernel and user debug may be
|
|
# installed in different directories. Setting it to "" restores the historical
|
|
# behavior of installing debug files in the kernel directory.
|
|
KERN_DEBUGDIR?= ${DEBUGDIR}
|
|
|
|
.MAIN: all
|
|
|
|
.if !defined(NO_MODULES)
|
|
# Default prefix used for modules installed from ports
|
|
LOCALBASE?= /usr/local
|
|
|
|
LOCAL_MODULES_DIR?= ${LOCALBASE}/sys/modules
|
|
|
|
# Default to installing all modules installed by ports unless overridden
|
|
# by the user.
|
|
.if !defined(LOCAL_MODULES) && exists(${LOCAL_MODULES_DIR})
|
|
LOCAL_MODULES!= ls ${LOCAL_MODULES_DIR}
|
|
.endif
|
|
.endif
|
|
|
|
.for target in all clean cleandepend cleandir clobber depend install \
|
|
${_obj} reinstall tags
|
|
${target}: kernel-${target}
|
|
.if !defined(NO_MODULES)
|
|
${target}: modules-${target}
|
|
modules-${target}:
|
|
.if !defined(MODULES_WITH_WORLD) && exists($S/modules)
|
|
cd $S/modules; ${MKMODULESENV} ${MAKE} \
|
|
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
|
|
.endif
|
|
.for module in ${LOCAL_MODULES}
|
|
@${ECHODIR} "===> ${module} (${target:S/^reinstall$/install/:S/^clobber$/cleandir/})"
|
|
@cd ${LOCAL_MODULES_DIR}/${module}; ${MKMODULESENV} ${MAKE} \
|
|
DIRPRFX="${module}/" \
|
|
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
|
|
.endfor
|
|
.endif
|
|
.endfor
|
|
|
|
# Handle ports (as defined by the user) that build kernel modules
|
|
.if !defined(NO_MODULES) && defined(PORTS_MODULES)
|
|
#
|
|
# The ports tree needs some environment variables defined to match the new kernel
|
|
#
|
|
# SRC_BASE is how the ports tree refers to the location of the base source files
|
|
.if !defined(SRC_BASE)
|
|
SRC_BASE= ${SYSDIR:H:tA}
|
|
.endif
|
|
# OSVERSION is used by some ports to determine build options
|
|
.if !defined(OSRELDATE)
|
|
# Definition copied from src/Makefile.inc1
|
|
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
|
|
${MAKEOBJDIRPREFIX}${SRC_BASE}/include/osreldate.h
|
|
.endif
|
|
# Keep the related ports builds in the obj directory so that they are only rebuilt once per kernel build
|
|
#
|
|
# Ports search for some dependencies in PATH, so add the location of the
|
|
# installed files
|
|
WRKDIRPREFIX?= ${.OBJDIR}
|
|
PORTSMODULESENV=\
|
|
env \
|
|
-u CC \
|
|
-u CXX \
|
|
-u CPP \
|
|
-u MAKESYSPATH \
|
|
-u MK_AUTO_OBJ \
|
|
-u MAKEOBJDIR \
|
|
MAKEFLAGS="${MAKEFLAGS:M*:tW:S/^-m /-m_/g:S/ -m / -m_/g:tw:N-m_*:NMK_AUTO_OBJ=*}" \
|
|
SYSDIR=${SYSDIR} \
|
|
PATH=${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin \
|
|
SRC_BASE=${SRC_BASE} \
|
|
OSVERSION=${OSRELDATE} \
|
|
WRKDIRPREFIX=${WRKDIRPREFIX}
|
|
|
|
# The WRKDIR needs to be cleaned before building, and trying to change the target
|
|
# with a :C pattern below results in install -> instclean
|
|
all:
|
|
.for __i in ${PORTS_MODULES}
|
|
@${ECHO} "===> Ports module ${__i} (all)"
|
|
cd ${PORTSDIR:U/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B clean build
|
|
.endfor
|
|
|
|
.for __target in install reinstall clean
|
|
${__target}: ports-${__target}
|
|
ports-${__target}:
|
|
.for __i in ${PORTS_MODULES}
|
|
@${ECHO} "===> Ports module ${__i} (${__target})"
|
|
cd ${PORTSDIR:U/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B ${__target:C/(re)?install/deinstall reinstall/}
|
|
.endfor
|
|
.endfor
|
|
.endif
|
|
|
|
.ORDER: kernel-install modules-install
|
|
|
|
beforebuild: .PHONY
|
|
kernel-all: beforebuild .WAIT ${KERNEL_KO} ${KERNEL_EXTRA}
|
|
|
|
kernel-cleandir: kernel-clean kernel-cleandepend
|
|
|
|
kernel-clobber:
|
|
find . -maxdepth 1 ! -type d ! -name version -delete
|
|
|
|
kernel-obj:
|
|
|
|
.if !defined(NO_MODULES)
|
|
modules: modules-all
|
|
modules-depend: beforebuild
|
|
modules-all: beforebuild
|
|
|
|
.if !defined(NO_MODULES_OBJ)
|
|
modules-all modules-depend: modules-obj
|
|
.endif
|
|
.endif
|
|
|
|
.if !defined(DEBUG)
|
|
FULLKERNEL= ${KERNEL_KO}
|
|
.else
|
|
FULLKERNEL= ${KERNEL_KO}.full
|
|
${KERNEL_KO}: ${FULLKERNEL} ${KERNEL_KO}.debug
|
|
${OBJCOPY} --strip-debug --add-gnu-debuglink=${KERNEL_KO}.debug \
|
|
${FULLKERNEL} ${.TARGET}
|
|
${KERNEL_KO}.debug: ${FULLKERNEL}
|
|
${OBJCOPY} --only-keep-debug ${FULLKERNEL} ${.TARGET}
|
|
install.debug reinstall.debug: gdbinit
|
|
cd ${.CURDIR}; ${MAKE} ${.TARGET:R}
|
|
|
|
# Install gdbinit files for kernel debugging.
|
|
gdbinit:
|
|
grep -v '# XXX' ${S}/../tools/debugscripts/dot.gdbinit | \
|
|
sed "s:MODPATH:${.OBJDIR}/modules:" > .gdbinit
|
|
cp ${S}/../tools/debugscripts/gdbinit.kernel ${.CURDIR}
|
|
.if exists(${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH})
|
|
cp ${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH} \
|
|
${.CURDIR}/gdbinit.machine
|
|
.endif
|
|
.endif
|
|
|
|
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
|
|
@rm -f ${.TARGET}
|
|
@echo linking ${.TARGET}
|
|
${SYSTEM_LD}
|
|
.if !empty(MD_ROOT_SIZE_CONFIGURED) && defined(MFS_IMAGE)
|
|
@sh ${S}/tools/embed_mfs.sh ${.TARGET} ${MFS_IMAGE}
|
|
.endif
|
|
.if ${MK_CTF} != "no"
|
|
@echo ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ...
|
|
@${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${SYSTEM_OBJS} vers.o
|
|
.endif
|
|
.if !defined(DEBUG)
|
|
${OBJCOPY} --strip-debug ${.TARGET}
|
|
.endif
|
|
${SYSTEM_LD_TAIL}
|
|
|
|
OBJS_DEPEND_GUESS+= offset.inc assym.inc vnode_if.h ${BEFORE_DEPEND:M*.h} \
|
|
${MFILES:T:S/.m$/.h/}
|
|
|
|
.for mfile in ${MFILES}
|
|
# XXX the low quality .m.o rules gnerated by config are normally used
|
|
# instead of the .m.c rules here.
|
|
${mfile:T:S/.m$/.c/}: ${mfile}
|
|
${AWK} -f $S/tools/makeobjops.awk ${mfile} -c
|
|
${mfile:T:S/.m$/.h/}: ${mfile}
|
|
${AWK} -f $S/tools/makeobjops.awk ${mfile} -h
|
|
.endfor
|
|
|
|
kernel-clean:
|
|
rm -f *.o *.so *.pico *.ko *.s eddep errs \
|
|
${FULLKERNEL} ${KERNEL_KO} ${KERNEL_KO}.debug \
|
|
tags vers.c \
|
|
vnode_if.c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h \
|
|
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
|
|
${CLEAN}
|
|
|
|
# This is a hack. BFD "optimizes" away dynamic mode if there are no
|
|
# dynamic references. We could probably do a '-Bforcedynamic' mode like
|
|
# in the a.out ld. For now, this works.
|
|
force-dynamic-hack.c:
|
|
:> ${.TARGET}
|
|
|
|
force-dynamic-hack.pico: force-dynamic-hack.c Makefile
|
|
${CC} ${CCLDFLAGS} -shared ${CFLAGS} -nostdlib \
|
|
force-dynamic-hack.c -o ${.TARGET}
|
|
|
|
offset.inc: $S/kern/genoffset.sh genoffset.o
|
|
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genoffset.sh genoffset.o > ${.TARGET}
|
|
|
|
genoffset.o: $S/kern/genoffset.c
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} -fcommon $S/kern/genoffset.c
|
|
|
|
# genoffset_test.o is not actually used for anything - the point of compiling it
|
|
# is to exercise the CTASSERT that checks that the offsets in the offset.inc
|
|
# _lite struct(s) match those in the original(s).
|
|
genoffset_test.o: $S/kern/genoffset.c offset.inc
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} -fcommon -DOFFSET_TEST \
|
|
$S/kern/genoffset.c -o ${.TARGET}
|
|
|
|
assym.inc: $S/kern/genassym.sh genassym.o genoffset_test.o
|
|
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genassym.sh genassym.o > ${.TARGET}
|
|
|
|
genassym.o: $S/$M/$M/genassym.c offset.inc
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} -fcommon $S/$M/$M/genassym.c
|
|
|
|
OBJS_DEPEND_GUESS+= opt_global.h
|
|
genoffset.o genassym.o vers.o: opt_global.h
|
|
|
|
.if !empty(.MAKE.MODE:Unormal:Mmeta) && empty(.MAKE.MODE:Unormal:Mnofilemon)
|
|
_meta_filemon= 1
|
|
.endif
|
|
.if ${MK_DIRDEPS_BUILD} == "no"
|
|
# Skip reading .depend when not needed to speed up tree-walks and simple
|
|
# lookups. For install, only do this if no other targets are specified.
|
|
# Also skip generating or including .depend.* files if in meta+filemon mode
|
|
# since it will track dependencies itself. OBJS_DEPEND_GUESS is still used
|
|
# for _meta_filemon but not for _SKIP_DEPEND.
|
|
.if !defined(NO_SKIP_DEPEND) && \
|
|
((!empty(.MAKEFLAGS:M-V) && empty(.MAKEFLAGS:M*DEP*)) || \
|
|
${.TARGETS:M*obj} == ${.TARGETS} || \
|
|
${.TARGETS:M*clean*} == ${.TARGETS} || \
|
|
${.TARGETS:M*install*} == ${.TARGETS})
|
|
_SKIP_DEPEND= 1
|
|
.endif
|
|
.if defined(_SKIP_DEPEND) || defined(_meta_filemon)
|
|
.MAKE.DEPENDFILE= /dev/null
|
|
.endif
|
|
.endif
|
|
|
|
kernel-depend: .depend
|
|
SRCS= assym.inc offset.inc vnode_if.h ${BEFORE_DEPEND} ${CFILES} \
|
|
${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
|
|
${MFILES:T:S/.m$/.h/}
|
|
DEPENDOBJS+= ${SYSTEM_OBJS} genassym.o genoffset.o genoffset_test.o
|
|
DEPENDOBJS+= ${CLEAN:M*.o}
|
|
DEPENDFILES= ${DEPENDOBJS:O:u:C/^/.depend./}
|
|
.if ${MAKE_VERSION} < 20160220
|
|
DEPEND_MP?= -MP
|
|
.endif
|
|
.if defined(_SKIP_DEPEND)
|
|
# Don't bother reading any .meta files
|
|
${DEPENDOBJS}: .NOMETA
|
|
.depend: .NOMETA
|
|
# Unset these to avoid looping/statting on them later.
|
|
.undef DEPENDOBJS
|
|
.undef DEPENDFILES
|
|
.endif # defined(_SKIP_DEPEND)
|
|
DEPEND_CFLAGS+= -MD ${DEPEND_MP} -MF.depend.${.TARGET}
|
|
DEPEND_CFLAGS+= -MT${.TARGET}
|
|
.if !defined(_meta_filemon)
|
|
.if !empty(DEPEND_CFLAGS)
|
|
# Only add in DEPEND_CFLAGS for CFLAGS on files we expect from DEPENDOBJS
|
|
# as those are the only ones we will include.
|
|
DEPEND_CFLAGS_CONDITION= "${DEPENDOBJS:M${.TARGET}}" != ""
|
|
CFLAGS+= ${${DEPEND_CFLAGS_CONDITION}:?${DEPEND_CFLAGS}:}
|
|
.endif
|
|
.for __depend_obj in ${DEPENDFILES}
|
|
.if ${MAKE_VERSION} < 20160220
|
|
.sinclude "${.OBJDIR}/${__depend_obj}"
|
|
.else
|
|
.dinclude "${.OBJDIR}/${__depend_obj}"
|
|
.endif
|
|
.endfor
|
|
.endif # !defined(_meta_filemon)
|
|
|
|
# Always run 'make depend' to generate dependencies early and to avoid the
|
|
# need for manually running it. For the kernel this is mostly a NOP since
|
|
# all dependencies are correctly added or accounted for. This is mostly to
|
|
# ensure downstream uses of kernel-depend are handled.
|
|
beforebuild: kernel-depend
|
|
|
|
# Guess some dependencies for when no ${DEPENDFILE}.OBJ is generated yet.
|
|
# For meta+filemon the .meta file is checked for since it is the dependency
|
|
# file used.
|
|
.for __obj in ${DEPENDOBJS:O:u}
|
|
.if defined(_meta_filemon)
|
|
_depfile= ${.OBJDIR}/${__obj}.meta
|
|
.else
|
|
_depfile= ${.OBJDIR}/.depend.${__obj}
|
|
.endif
|
|
.if !exists(${_depfile})
|
|
.if ${SYSTEM_OBJS:M${__obj}}
|
|
${__obj}: ${OBJS_DEPEND_GUESS}
|
|
.endif
|
|
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
|
|
.elif defined(_meta_filemon)
|
|
# For meta mode we still need to know which file to depend on to avoid
|
|
# ambiguous suffix transformation rules from .PATH. Meta mode does not
|
|
# use .depend files. We really only need source files, not headers since
|
|
# they are typically in SRCS/beforebuild already. For target-specific
|
|
# guesses do include headers though since they may not be in SRCS.
|
|
.if ${SYSTEM_OBJS:M${__obj}}
|
|
${__obj}: ${OBJS_DEPEND_GUESS:N*.h}
|
|
.endif
|
|
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
|
|
.endif # !exists(${_depfile})
|
|
.endfor
|
|
|
|
.NOPATH: .depend ${DEPENDFILES}
|
|
|
|
.depend: .PRECIOUS ${SRCS}
|
|
|
|
_ILINKS= machine
|
|
.if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64"
|
|
_ILINKS+= ${MACHINE_CPUARCH}
|
|
.endif
|
|
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
|
|
_ILINKS+= x86
|
|
.endif
|
|
.if ${MACHINE_CPUARCH} == "amd64"
|
|
_ILINKS+= i386
|
|
.endif
|
|
|
|
# Ensure that the link exists without depending on it when it exists.
|
|
# Ensure that debug info references the path in the source tree.
|
|
.for _link in ${_ILINKS}
|
|
.if !exists(${.OBJDIR}/${_link})
|
|
${SRCS} ${DEPENDOBJS}: ${_link}
|
|
.endif
|
|
.if ${_link} == "machine"
|
|
CFLAGS+= -fdebug-prefix-map=./machine=${SYSDIR}/${MACHINE}/include
|
|
.else
|
|
CFLAGS+= -fdebug-prefix-map=./${_link}=${SYSDIR}/${_link}/include
|
|
.endif
|
|
.endfor
|
|
|
|
${_ILINKS}:
|
|
@case ${.TARGET} in \
|
|
machine) \
|
|
path=${S}/${MACHINE}/include ;; \
|
|
*) \
|
|
path=${S}/${.TARGET}/include ;; \
|
|
esac ; \
|
|
${ECHO} ${.TARGET} "->" $$path ; \
|
|
ln -fns $$path ${.TARGET}
|
|
|
|
# .depend needs include links so we remove them only together.
|
|
kernel-cleandepend: .PHONY
|
|
rm -f .depend .depend.* ${_ILINKS}
|
|
|
|
kernel-tags:
|
|
@ls .depend.* > /dev/null 2>&1 || \
|
|
{ echo "you must make all first"; exit 1; }
|
|
sh $S/conf/systags.sh
|
|
|
|
kernel-install: .PHONY
|
|
@if [ ! -f ${KERNEL_KO} ] ; then \
|
|
echo "You must build a kernel first." ; \
|
|
exit 1 ; \
|
|
fi
|
|
.if exists(${DESTDIR}${KODIR})
|
|
-thiskernel=`sysctl -n kern.bootfile || echo /boot/kernel/kernel` ; \
|
|
if [ ! "`dirname "$$thiskernel"`" -ef ${DESTDIR}${KODIR} ] ; then \
|
|
chflags -R noschg ${DESTDIR}${KODIR} ; \
|
|
rm -rf ${DESTDIR}${KODIR} ; \
|
|
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ; \
|
|
else \
|
|
if [ -d ${DESTDIR}${KODIR}.old ] ; then \
|
|
chflags -R noschg ${DESTDIR}${KODIR}.old ; \
|
|
rm -rf ${DESTDIR}${KODIR}.old ; \
|
|
fi ; \
|
|
mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old ; \
|
|
if [ -n "${KERN_DEBUGDIR}" -a \
|
|
-d ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ]; then \
|
|
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
|
|
mv ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
|
|
fi ; \
|
|
sysctl kern.bootfile=${DESTDIR}${KODIR}.old/"`basename "$$thiskernel"`" ; \
|
|
fi
|
|
.endif
|
|
mkdir -p ${DESTDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
|
|
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
|
|
mkdir -p ${DESTDIR}${KERN_DEBUGDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
|
|
.endif
|
|
.if defined(KERNEL_EXTRA_INSTALL)
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_EXTRA_INSTALL} ${DESTDIR}${KODIR}/
|
|
.endif
|
|
|
|
|
|
|
|
kernel-reinstall:
|
|
@-chflags -R noschg ${DESTDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
|
|
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
|
|
.endif
|
|
|
|
config.o env.o hints.o vers.o vnode_if.o:
|
|
${NORMAL_C}
|
|
${NORMAL_CTFCONVERT}
|
|
|
|
.if ${MK_REPRODUCIBLE_BUILD} != "no"
|
|
REPRO_FLAG="-R"
|
|
.endif
|
|
vers.c: .NOMETA_CMP $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP:Nvers.*}
|
|
MAKE="${MAKE}" sh $S/conf/newvers.sh ${REPRO_FLAG} ${KERN_IDENT}
|
|
|
|
vnode_if.c: $S/tools/vnode_if.awk $S/kern/vnode_if.src
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -c
|
|
|
|
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: $S/tools/vnode_if.awk \
|
|
$S/kern/vnode_if.src
|
|
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -h
|
|
vnode_if_newproto.h:
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -p
|
|
vnode_if_typedef.h:
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -q
|
|
|
|
.if ${MFS_IMAGE:Uno} != "no"
|
|
.if empty(MD_ROOT_SIZE_CONFIGURED)
|
|
embedfs_${MFS_IMAGE:T:R}.o: ${MFS_IMAGE} $S/dev/md/embedfs.S
|
|
${CC} ${CFLAGS} ${ACFLAGS} -DMFS_IMAGE="${MFS_IMAGE}" -c \
|
|
$S/dev/md/embedfs.S -o ${.TARGET}
|
|
.endif
|
|
.endif
|
|
|
|
.include "kern.mk"
|