freebsd-dev/sys/dev/isci/scil/sati_atapi.c
Pedro F. Giffuni 718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

260 lines
8.5 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/**
* @file
* @brief This file contains all of the method implementations that
* can be utilized by a user to perform SCSI-to-ATA Translation.
* SATI adheres to the www.t10.org SAT specification.
*
* For situations where compliance is not observed, the SATI will
* return an error indication (most likely INVALID FIELD IN CDB sense data).
*/
#include <dev/isci/scil/sati.h>
#include <dev/isci/scil/sati_util.h>
#include <dev/isci/scil/sati_atapi.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/intel_ata.h>
#include <dev/isci/scil/intel_scsi.h>
#include <dev/isci/scil/intel_sat.h>
#include <dev/isci/scil/sati_report_luns.h>
//******************************************************************************
//* P U B L I C M E T H O D S
//******************************************************************************
SATI_STATUS sati_atapi_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
SATI_DEVICE_T * sati_device,
void * scsi_io,
void * atapi_io
)
{
SATI_STATUS status;
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
SATA_FIS_REG_H2D_T * register_fis =
(SATA_FIS_REG_H2D_T *)sati_cb_get_h2d_register_fis_address(atapi_io);
U8 io_direction = SATI_DATA_DIRECTION_IN;
//No sense response has been set for the translation sequence yet
sequence->is_sense_response_set = FALSE;
// Default to no translation response required
sequence->is_translate_response_required = FALSE;
sequence->number_data_bytes_set = 0;
sequence->device = sati_device;
sequence->command_specific_data.scratch = 0;
sati_cb_get_data_direction(scsi_io, &io_direction);
//set sat protocol.
if (io_direction == SATI_DATA_DIRECTION_NONE)
sequence->protocol = SAT_PROTOCOL_PACKET_NON_DATA;
else if (io_direction == SATI_DATA_DIRECTION_IN)
sequence->protocol = SAT_PROTOCOL_PACKET_DMA_DATA_IN;
else if (io_direction == SATI_DATA_DIRECTION_OUT)
sequence->protocol = SAT_PROTOCOL_PACKET_DMA_DATA_OUT;
// We don't send Report Luns command out.
if (sati_get_cdb_byte(cdb, 0) == SCSI_REPORT_LUNS)
{
status = sati_report_luns_translate_command(
sequence, scsi_io, atapi_io
);
}
else if (sati_cb_get_lun(scsi_io) != 0)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_LOGICAL_UNIT_NOT_SUPPORTED,
0
);
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
if (sequence->state == SATI_SEQUENCE_STATE_INCOMPLETE)
{ //Request Sense command is required.
U8 request_sense_cdb[SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH] =
{0x3, 0x0, 0x0, 0x0, 0x12, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
//set the sequence->protocol to DATA_IN anyway;
sequence->protocol = SAT_PROTOCOL_PACKET_DMA_DATA_IN;
//set the cdb for Request Sense using command_specific_data field.
memcpy(sequence->command_specific_data.sati_atapi_data.request_sense_cdb,
request_sense_cdb,
SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH
);
}
//build Packet Fis for any other command translation.
register_fis->command = ATA_PACKET;
register_fis->features |= ATA_PACKET_FEATURE_DMA;
register_fis->fis_type = SATA_FIS_TYPE_REGH2D;
register_fis->command_flag = 1;
status = SATI_SUCCESS;
}
return status;
}
SATI_STATUS sati_atapi_translate_command_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
)
{
SATI_STATUS status = SATI_COMPLETE;
U8 * register_fis = sati_cb_get_d2h_register_fis_address(atapi_io);
U8 ata_status;
/**
* If the device fault bit is set in the status register, then
* set the sense data and return.
*/
ata_status = (U8) sati_get_ata_status(register_fis);
if (ata_status & ATA_STATUS_REG_DEVICE_FAULT_BIT)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_HARDWARE_ERROR,
SCSI_ASC_INTERNAL_TARGET_FAILURE,
SCSI_ASCQ_INTERNAL_TARGET_FAILURE
);
sequence->device->state = SATI_DEVICE_STATE_DEVICE_FAULT_OCCURRED;
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else if (ata_status & ATA_STATUS_REG_ERROR_BIT)
{
//reset the register_fis.
memset(register_fis, 0, sizeof(SATA_FIS_REG_D2H_T));
//Internal Request Sense command is needed.
sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE;
return SATI_SEQUENCE_INCOMPLETE;
}
return status;
}
void sati_atapi_translate_request_sense_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
)
{
//sense data is already in place.
SCI_SSP_RESPONSE_IU_T * rsp_iu = (SCI_SSP_RESPONSE_IU_T*)
sati_cb_get_response_iu_address(scsi_io);
sati_scsi_common_response_iu_construct(
rsp_iu,
SCSI_STATUS_CHECK_CONDITION,
sati_scsi_get_sense_data_length(sequence, scsi_io),
SCSI_RESPONSE_DATA_PRES_SENSE_DATA
);
sequence->is_sense_response_set = TRUE;
sequence->state = SATI_SEQUENCE_STATE_FINAL;
}
U32 sati_atapi_translate_number_of_bytes_transferred(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
)
{
U8* cdb = sati_cb_get_cdb_address(scsi_io);
U8 response_data;
U32 data_length = 0;
switch(cdb[0])
{
case SCSI_MODE_SENSE_10:
sati_cb_get_data_byte(scsi_io, 1, &response_data);
data_length = response_data+2;
break;
case 0x51: //READ DISC INFORMATION
sati_cb_get_data_byte(scsi_io, 1, &response_data);
data_length = response_data+2;
break;
default:
break;
}
return data_length;
}