freebsd-dev/usr.sbin/bhyve/pci_virtio_block.c
John Baldwin 6a284cacb1 bhyve: Remove vmctx argument from PCI device model methods.
Most of these arguments were unused.  Device models which do need
access to the vmctx in one of these methods can obtain it from the
pi_vmctx member of the pci_devinst argument instead.

Reviewed by:	corvink, markj
Differential Revision:	https://reviews.freebsd.org/D38096
2023-01-19 10:30:18 -08:00

602 lines
16 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
* Copyright 2020-2021 Joyent, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/linker_set.h>
#include <sys/stat.h>
#include <sys/uio.h>
#include <sys/ioctl.h>
#include <sys/disk.h>
#include <machine/vmm_snapshot.h>
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
#include <assert.h>
#include <pthread.h>
#include <md5.h>
#include "bhyverun.h"
#include "config.h"
#include "debug.h"
#include "pci_emul.h"
#include "virtio.h"
#include "block_if.h"
#define VTBLK_BSIZE 512
#define VTBLK_RINGSZ 128
_Static_assert(VTBLK_RINGSZ <= BLOCKIF_RING_MAX, "Each ring entry must be able to queue a request");
#define VTBLK_S_OK 0
#define VTBLK_S_IOERR 1
#define VTBLK_S_UNSUPP 2
#define VTBLK_BLK_ID_BYTES 20 + 1
/* Capability bits */
#define VTBLK_F_BARRIER (1 << 0) /* Does host support barriers? */
#define VTBLK_F_SIZE_MAX (1 << 1) /* Indicates maximum segment size */
#define VTBLK_F_SEG_MAX (1 << 2) /* Indicates maximum # of segments */
#define VTBLK_F_GEOMETRY (1 << 4) /* Legacy geometry available */
#define VTBLK_F_RO (1 << 5) /* Disk is read-only */
#define VTBLK_F_BLK_SIZE (1 << 6) /* Block size of disk is available*/
#define VTBLK_F_SCSI (1 << 7) /* Supports scsi command passthru */
#define VTBLK_F_FLUSH (1 << 9) /* Writeback mode enabled after reset */
#define VTBLK_F_WCE (1 << 9) /* Legacy alias for FLUSH */
#define VTBLK_F_TOPOLOGY (1 << 10) /* Topology information is available */
#define VTBLK_F_CONFIG_WCE (1 << 11) /* Writeback mode available in config */
#define VTBLK_F_MQ (1 << 12) /* Multi-Queue */
#define VTBLK_F_DISCARD (1 << 13) /* Trim blocks */
#define VTBLK_F_WRITE_ZEROES (1 << 14) /* Write zeros */
/*
* Host capabilities
*/
#define VTBLK_S_HOSTCAPS \
( VTBLK_F_SEG_MAX | \
VTBLK_F_BLK_SIZE | \
VTBLK_F_FLUSH | \
VTBLK_F_TOPOLOGY | \
VIRTIO_RING_F_INDIRECT_DESC ) /* indirect descriptors */
/*
* The current blockif_delete() interface only allows a single delete
* request at a time.
*/
#define VTBLK_MAX_DISCARD_SEG 1
/*
* An arbitrary limit to prevent excessive latency due to large
* delete requests.
*/
#define VTBLK_MAX_DISCARD_SECT ((16 << 20) / VTBLK_BSIZE) /* 16 MiB */
/*
* Config space "registers"
*/
struct vtblk_config {
uint64_t vbc_capacity;
uint32_t vbc_size_max;
uint32_t vbc_seg_max;
struct {
uint16_t cylinders;
uint8_t heads;
uint8_t sectors;
} vbc_geometry;
uint32_t vbc_blk_size;
struct {
uint8_t physical_block_exp;
uint8_t alignment_offset;
uint16_t min_io_size;
uint32_t opt_io_size;
} vbc_topology;
uint8_t vbc_writeback;
uint8_t unused0[1];
uint16_t num_queues;
uint32_t max_discard_sectors;
uint32_t max_discard_seg;
uint32_t discard_sector_alignment;
uint32_t max_write_zeroes_sectors;
uint32_t max_write_zeroes_seg;
uint8_t write_zeroes_may_unmap;
uint8_t unused1[3];
} __packed;
/*
* Fixed-size block header
*/
struct virtio_blk_hdr {
#define VBH_OP_READ 0
#define VBH_OP_WRITE 1
#define VBH_OP_SCSI_CMD 2
#define VBH_OP_SCSI_CMD_OUT 3
#define VBH_OP_FLUSH 4
#define VBH_OP_FLUSH_OUT 5
#define VBH_OP_IDENT 8
#define VBH_OP_DISCARD 11
#define VBH_OP_WRITE_ZEROES 13
#define VBH_FLAG_BARRIER 0x80000000 /* OR'ed into vbh_type */
uint32_t vbh_type;
uint32_t vbh_ioprio;
uint64_t vbh_sector;
} __packed;
/*
* Debug printf
*/
static int pci_vtblk_debug;
#define DPRINTF(params) if (pci_vtblk_debug) PRINTLN params
#define WPRINTF(params) PRINTLN params
struct pci_vtblk_ioreq {
struct blockif_req io_req;
struct pci_vtblk_softc *io_sc;
uint8_t *io_status;
uint16_t io_idx;
};
struct virtio_blk_discard_write_zeroes {
uint64_t sector;
uint32_t num_sectors;
struct {
uint32_t unmap:1;
uint32_t reserved:31;
} flags;
};
/*
* Per-device softc
*/
struct pci_vtblk_softc {
struct virtio_softc vbsc_vs;
pthread_mutex_t vsc_mtx;
struct vqueue_info vbsc_vq;
struct vtblk_config vbsc_cfg;
struct virtio_consts vbsc_consts;
struct blockif_ctxt *bc;
char vbsc_ident[VTBLK_BLK_ID_BYTES];
struct pci_vtblk_ioreq vbsc_ios[VTBLK_RINGSZ];
};
static void pci_vtblk_reset(void *);
static void pci_vtblk_notify(void *, struct vqueue_info *);
static int pci_vtblk_cfgread(void *, int, int, uint32_t *);
static int pci_vtblk_cfgwrite(void *, int, int, uint32_t);
#ifdef BHYVE_SNAPSHOT
static void pci_vtblk_pause(void *);
static void pci_vtblk_resume(void *);
static int pci_vtblk_snapshot(void *, struct vm_snapshot_meta *);
#endif
static struct virtio_consts vtblk_vi_consts = {
.vc_name = "vtblk",
.vc_nvq = 1,
.vc_cfgsize = sizeof(struct vtblk_config),
.vc_reset = pci_vtblk_reset,
.vc_qnotify = pci_vtblk_notify,
.vc_cfgread = pci_vtblk_cfgread,
.vc_cfgwrite = pci_vtblk_cfgwrite,
.vc_apply_features = NULL,
.vc_hv_caps = VTBLK_S_HOSTCAPS,
#ifdef BHYVE_SNAPSHOT
.vc_pause = pci_vtblk_pause,
.vc_resume = pci_vtblk_resume,
.vc_snapshot = pci_vtblk_snapshot,
#endif
};
static void
pci_vtblk_reset(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device reset requested !"));
vi_reset_dev(&sc->vbsc_vs);
}
static void
pci_vtblk_done_locked(struct pci_vtblk_ioreq *io, int err)
{
struct pci_vtblk_softc *sc = io->io_sc;
/* convert errno into a virtio block error return */
if (err == EOPNOTSUPP || err == ENOSYS)
*io->io_status = VTBLK_S_UNSUPP;
else if (err != 0)
*io->io_status = VTBLK_S_IOERR;
else
*io->io_status = VTBLK_S_OK;
/*
* Return the descriptor back to the host.
* We wrote 1 byte (our status) to host.
*/
vq_relchain(&sc->vbsc_vq, io->io_idx, 1);
vq_endchains(&sc->vbsc_vq, 0);
}
#ifdef BHYVE_SNAPSHOT
static void
pci_vtblk_pause(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device pause requested !\n"));
blockif_pause(sc->bc);
}
static void
pci_vtblk_resume(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device resume requested !\n"));
blockif_resume(sc->bc);
}
static int
pci_vtblk_snapshot(void *vsc, struct vm_snapshot_meta *meta)
{
int ret;
struct pci_vtblk_softc *sc = vsc;
SNAPSHOT_VAR_OR_LEAVE(sc->vbsc_cfg, meta, ret, done);
SNAPSHOT_BUF_OR_LEAVE(sc->vbsc_ident, sizeof(sc->vbsc_ident),
meta, ret, done);
done:
return (ret);
}
#endif
static void
pci_vtblk_done(struct blockif_req *br, int err)
{
struct pci_vtblk_ioreq *io = br->br_param;
struct pci_vtblk_softc *sc = io->io_sc;
pthread_mutex_lock(&sc->vsc_mtx);
pci_vtblk_done_locked(io, err);
pthread_mutex_unlock(&sc->vsc_mtx);
}
static void
pci_vtblk_proc(struct pci_vtblk_softc *sc, struct vqueue_info *vq)
{
struct virtio_blk_hdr *vbh;
struct pci_vtblk_ioreq *io;
int i, n;
int err;
ssize_t iolen;
int writeop, type;
struct vi_req req;
struct iovec iov[BLOCKIF_IOV_MAX + 2];
struct virtio_blk_discard_write_zeroes *discard;
n = vq_getchain(vq, iov, BLOCKIF_IOV_MAX + 2, &req);
/*
* The first descriptor will be the read-only fixed header,
* and the last is for status (hence +2 above and below).
* The remaining iov's are the actual data I/O vectors.
*
* XXX - note - this fails on crash dump, which does a
* VIRTIO_BLK_T_FLUSH with a zero transfer length
*/
assert(n >= 2 && n <= BLOCKIF_IOV_MAX + 2);
io = &sc->vbsc_ios[req.idx];
assert(req.readable != 0);
assert(iov[0].iov_len == sizeof(struct virtio_blk_hdr));
vbh = (struct virtio_blk_hdr *)iov[0].iov_base;
memcpy(&io->io_req.br_iov, &iov[1], sizeof(struct iovec) * (n - 2));
io->io_req.br_iovcnt = n - 2;
io->io_req.br_offset = vbh->vbh_sector * VTBLK_BSIZE;
io->io_status = (uint8_t *)iov[--n].iov_base;
assert(req.writable != 0);
assert(iov[n].iov_len == 1);
/*
* XXX
* The guest should not be setting the BARRIER flag because
* we don't advertise the capability.
*/
type = vbh->vbh_type & ~VBH_FLAG_BARRIER;
writeop = (type == VBH_OP_WRITE || type == VBH_OP_DISCARD);
/*
* - Write op implies read-only descriptor
* - Read/ident op implies write-only descriptor
*
* By taking away either the read-only fixed header or the write-only
* status iovec, the following condition should hold true.
*/
assert(n == (writeop ? req.readable : req.writable));
iolen = 0;
for (i = 1; i < n; i++) {
iolen += iov[i].iov_len;
}
io->io_req.br_resid = iolen;
DPRINTF(("virtio-block: %s op, %zd bytes, %d segs, offset %ld",
writeop ? "write/discard" : "read/ident", iolen, i - 1,
io->io_req.br_offset));
switch (type) {
case VBH_OP_READ:
err = blockif_read(sc->bc, &io->io_req);
break;
case VBH_OP_WRITE:
err = blockif_write(sc->bc, &io->io_req);
break;
case VBH_OP_DISCARD:
/*
* We currently only support a single request, if the guest
* has submitted a request that doesn't conform to the
* requirements, we return a error.
*/
if (iov[1].iov_len != sizeof (*discard)) {
pci_vtblk_done_locked(io, EINVAL);
return;
}
/* The segments to discard are provided rather than data */
discard = (struct virtio_blk_discard_write_zeroes *)
iov[1].iov_base;
/*
* virtio v1.1 5.2.6.2:
* The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP
* for discard and write zeroes commands if any unknown flag is
* set. Furthermore, the device MUST set the status byte to
* VIRTIO_BLK_S_UNSUPP for discard commands if the unmap flag
* is set.
*
* Currently there are no known flags for a DISCARD request.
*/
if (discard->flags.unmap != 0 || discard->flags.reserved != 0) {
pci_vtblk_done_locked(io, ENOTSUP);
return;
}
/* Make sure the request doesn't exceed our size limit */
if (discard->num_sectors > VTBLK_MAX_DISCARD_SECT) {
pci_vtblk_done_locked(io, EINVAL);
return;
}
io->io_req.br_offset = discard->sector * VTBLK_BSIZE;
io->io_req.br_resid = discard->num_sectors * VTBLK_BSIZE;
err = blockif_delete(sc->bc, &io->io_req);
break;
case VBH_OP_FLUSH:
case VBH_OP_FLUSH_OUT:
err = blockif_flush(sc->bc, &io->io_req);
break;
case VBH_OP_IDENT:
/* Assume a single buffer */
/* S/n equal to buffer is not zero-terminated. */
memset(iov[1].iov_base, 0, iov[1].iov_len);
strncpy(iov[1].iov_base, sc->vbsc_ident,
MIN(iov[1].iov_len, sizeof(sc->vbsc_ident)));
pci_vtblk_done_locked(io, 0);
return;
default:
pci_vtblk_done_locked(io, EOPNOTSUPP);
return;
}
assert(err == 0);
}
static void
pci_vtblk_notify(void *vsc, struct vqueue_info *vq)
{
struct pci_vtblk_softc *sc = vsc;
while (vq_has_descs(vq))
pci_vtblk_proc(sc, vq);
}
static void
pci_vtblk_resized(struct blockif_ctxt *bctxt __unused, void *arg,
size_t new_size)
{
struct pci_vtblk_softc *sc;
sc = arg;
sc->vbsc_cfg.vbc_capacity = new_size / VTBLK_BSIZE; /* 512-byte units */
vi_interrupt(&sc->vbsc_vs, VIRTIO_PCI_ISR_CONFIG,
sc->vbsc_vs.vs_msix_cfg_idx);
}
static int
pci_vtblk_init(struct pci_devinst *pi, nvlist_t *nvl)
{
char bident[sizeof("XXX:XXX")];
struct blockif_ctxt *bctxt;
const char *path, *serial;
MD5_CTX mdctx;
u_char digest[16];
struct pci_vtblk_softc *sc;
off_t size;
int i, sectsz, sts, sto;
/*
* The supplied backing file has to exist
*/
snprintf(bident, sizeof(bident), "%u:%u", pi->pi_slot, pi->pi_func);
bctxt = blockif_open(nvl, bident);
if (bctxt == NULL) {
perror("Could not open backing file");
return (1);
}
size = blockif_size(bctxt);
sectsz = blockif_sectsz(bctxt);
blockif_psectsz(bctxt, &sts, &sto);
sc = calloc(1, sizeof(struct pci_vtblk_softc));
sc->bc = bctxt;
for (i = 0; i < VTBLK_RINGSZ; i++) {
struct pci_vtblk_ioreq *io = &sc->vbsc_ios[i];
io->io_req.br_callback = pci_vtblk_done;
io->io_req.br_param = io;
io->io_sc = sc;
io->io_idx = i;
}
bcopy(&vtblk_vi_consts, &sc->vbsc_consts, sizeof (vtblk_vi_consts));
if (blockif_candelete(sc->bc))
sc->vbsc_consts.vc_hv_caps |= VTBLK_F_DISCARD;
pthread_mutex_init(&sc->vsc_mtx, NULL);
/* init virtio softc and virtqueues */
vi_softc_linkup(&sc->vbsc_vs, &sc->vbsc_consts, sc, pi, &sc->vbsc_vq);
sc->vbsc_vs.vs_mtx = &sc->vsc_mtx;
sc->vbsc_vq.vq_qsize = VTBLK_RINGSZ;
/* sc->vbsc_vq.vq_notify = we have no per-queue notify */
/*
* If an explicit identifier is not given, create an
* identifier using parts of the md5 sum of the filename.
*/
bzero(sc->vbsc_ident, VTBLK_BLK_ID_BYTES);
if ((serial = get_config_value_node(nvl, "serial")) != NULL ||
(serial = get_config_value_node(nvl, "ser")) != NULL) {
strlcpy(sc->vbsc_ident, serial, VTBLK_BLK_ID_BYTES);
} else {
path = get_config_value_node(nvl, "path");
MD5Init(&mdctx);
MD5Update(&mdctx, path, strlen(path));
MD5Final(digest, &mdctx);
snprintf(sc->vbsc_ident, VTBLK_BLK_ID_BYTES,
"BHYVE-%02X%02X-%02X%02X-%02X%02X",
digest[0], digest[1], digest[2], digest[3], digest[4],
digest[5]);
}
/* setup virtio block config space */
sc->vbsc_cfg.vbc_capacity = size / VTBLK_BSIZE; /* 512-byte units */
sc->vbsc_cfg.vbc_size_max = 0; /* not negotiated */
/*
* If Linux is presented with a seg_max greater than the virtio queue
* size, it can stumble into situations where it violates its own
* invariants and panics. For safety, we keep seg_max clamped, paying
* heed to the two extra descriptors needed for the header and status
* of a request.
*/
sc->vbsc_cfg.vbc_seg_max = MIN(VTBLK_RINGSZ - 2, BLOCKIF_IOV_MAX);
sc->vbsc_cfg.vbc_geometry.cylinders = 0; /* no geometry */
sc->vbsc_cfg.vbc_geometry.heads = 0;
sc->vbsc_cfg.vbc_geometry.sectors = 0;
sc->vbsc_cfg.vbc_blk_size = sectsz;
sc->vbsc_cfg.vbc_topology.physical_block_exp =
(sts > sectsz) ? (ffsll(sts / sectsz) - 1) : 0;
sc->vbsc_cfg.vbc_topology.alignment_offset =
(sto != 0) ? ((sts - sto) / sectsz) : 0;
sc->vbsc_cfg.vbc_topology.min_io_size = 0;
sc->vbsc_cfg.vbc_topology.opt_io_size = 0;
sc->vbsc_cfg.vbc_writeback = 0;
sc->vbsc_cfg.max_discard_sectors = VTBLK_MAX_DISCARD_SECT;
sc->vbsc_cfg.max_discard_seg = VTBLK_MAX_DISCARD_SEG;
sc->vbsc_cfg.discard_sector_alignment = MAX(sectsz, sts) / VTBLK_BSIZE;
/*
* Should we move some of this into virtio.c? Could
* have the device, class, and subdev_0 as fields in
* the virtio constants structure.
*/
pci_set_cfgdata16(pi, PCIR_DEVICE, VIRTIO_DEV_BLOCK);
pci_set_cfgdata16(pi, PCIR_VENDOR, VIRTIO_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_STORAGE);
pci_set_cfgdata16(pi, PCIR_SUBDEV_0, VIRTIO_ID_BLOCK);
pci_set_cfgdata16(pi, PCIR_SUBVEND_0, VIRTIO_VENDOR);
if (vi_intr_init(&sc->vbsc_vs, 1, fbsdrun_virtio_msix())) {
blockif_close(sc->bc);
free(sc);
return (1);
}
vi_set_io_bar(&sc->vbsc_vs, 0);
blockif_register_resize_callback(sc->bc, pci_vtblk_resized, sc);
return (0);
}
static int
pci_vtblk_cfgwrite(void *vsc __unused, int offset, int size __unused,
uint32_t value __unused)
{
DPRINTF(("vtblk: write to readonly reg %d", offset));
return (1);
}
static int
pci_vtblk_cfgread(void *vsc, int offset, int size, uint32_t *retval)
{
struct pci_vtblk_softc *sc = vsc;
void *ptr;
/* our caller has already verified offset and size */
ptr = (uint8_t *)&sc->vbsc_cfg + offset;
memcpy(retval, ptr, size);
return (0);
}
static const struct pci_devemu pci_de_vblk = {
.pe_emu = "virtio-blk",
.pe_init = pci_vtblk_init,
.pe_legacy_config = blockif_legacy_config,
.pe_barwrite = vi_pci_write,
.pe_barread = vi_pci_read,
#ifdef BHYVE_SNAPSHOT
.pe_snapshot = vi_pci_snapshot,
.pe_pause = vi_pci_pause,
.pe_resume = vi_pci_resume,
#endif
};
PCI_EMUL_SET(pci_de_vblk);