freebsd-dev/sys/powerpc/aim/locore.S
Benno Rice b8160b5af4 - Prevent the decrementer interrupt handler from nesting.
- Catch some more cases of PSL_EE and PSL_RI getting out of sync.
2002-02-28 11:57:47 +00:00

1350 lines
30 KiB
ArmAsm

/* $FreeBSD$ */
/* $NetBSD: locore.S,v 1.24 2000/05/31 05:09:17 thorpej Exp $ */
/*
* Copyright (C) 2001 Benno Rice
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY Benno Rice ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (C) 1995, 1996 Wolfgang Solfrank.
* Copyright (C) 1995, 1996 TooLs GmbH.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by TooLs GmbH.
* 4. The name of TooLs GmbH may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "opt_ddb.h"
#include "opt_ipkdb.h"
#include "assym.s"
#include <sys/syscall.h>
#include <machine/trap.h>
#include <machine/param.h>
#include <machine/sr.h>
#include <machine/psl.h>
#include <machine/asm.h>
/*
* Some instructions gas doesn't understand (yet?)
*/
#define bdneq bdnzf 2,
/*
* Globals
*/
.data
GLOBAL(tmpstk)
.space 8208
GLOBAL(esym)
.long 0 /* end of symbol table */
GLOBAL(proc0paddr)
.long 0 /* proc0 p_addr */
GLOBAL(PTmap)
.long 0 /* PTmap */
GLOBAL(decrnest)
.long 0
GLOBAL(intrnames)
.asciz "irq0", "irq1", "irq2", "irq3"
.asciz "irq4", "irq5", "irq6", "irq7"
.asciz "irq8", "irq9", "irq10", "irq11"
.asciz "irq12", "irq13", "irq14", "irq15"
.asciz "irq16", "irq17", "irq18", "irq19"
.asciz "irq20", "irq21", "irq22", "irq23"
.asciz "irq24", "irq25", "irq26", "irq27"
.asciz "irq28", "irq29", "irq30", "irq31"
.asciz "irq32", "irq33", "irq34", "irq35"
.asciz "irq36", "irq37", "irq38", "irq39"
.asciz "irq40", "irq41", "irq42", "irq43"
.asciz "irq44", "irq45", "irq46", "irq47"
.asciz "irq48", "irq49", "irq50", "irq51"
.asciz "irq52", "irq53", "irq54", "irq55"
.asciz "irq56", "irq57", "irq58", "irq59"
.asciz "irq60", "irq61", "irq62", "irq63"
.asciz "clock", "softclock", "softnet", "softserial"
GLOBAL(eintrnames)
.align 4
GLOBAL(intrcnt)
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.long 0,0,0,0
GLOBAL(eintrcnt)
GLOBAL(ofmsr)
.long 0 /* msr used in Open Firmware */
GLOBAL(powersave)
.long 0
/*
* File-scope for locore.S
*/
idle_u:
.long 0 /* fake uarea during idle after exit */
openfirmware_entry:
.long 0 /* openfirmware entry point */
srsave:
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
/*
* This symbol is here for the benefit of kvm_mkdb, and is supposed to
* mark the start of kernel text.
*/
.text
.globl kernel_text
kernel_text:
/*
* Startup entry. Note, this must be the first thing in the text
* segment!
*/
.text
.globl __start
__start:
#ifdef FIRMWORKSBUGS
mfmsr 0
andi. 0,0,PSL_IR|PSL_DR
beq 1f
bl ofwr_init
1:
#endif
li 8,0
li 9,0x100
mtctr 9
1:
dcbf 0,8
icbi 0,8
addi 8,8,0x20
bdnz 1b
sync
isync
mtibatu 0,0
mtibatu 1,0
mtibatu 2,0
mtibatu 3,0
mtdbatu 0,0
mtdbatu 1,0
mtdbatu 2,0
mtdbatu 3,0
li 9,0x12
mtibatl 0,9
mtdbatl 0,9
li 9,0x1ffe
mtibatu 0,9
mtdbatu 0,9
isync
lis 8,openfirmware_entry@ha
stw 5,openfirmware_entry@l(8) /* save client interface handler */
mr 3,5
lis 1,tmpstk@ha
addi 1,1,tmpstk@l
addi 1,1,8192
mfmsr 0
lis 9,ofmsr@ha
stw 0,ofmsr@l(9)
bl OF_init
lis 4,end@ha
addi 4,4,end@l
mr 5,4
li 9,PAGE_MASK
add 4,4,9
andc 4,4,9
lis 9,OF_buf@ha
stw 4,OF_buf@l(9)
addi 4,4,PAGE_SIZE
lis 9,proc0paddr@ha
stw 4,proc0paddr@l(9)
addi 4,4,USPACE-FRAMELEN
mr 1,4
xor 0,0,0
stwu 0,-16(1)
lis 3,kernel_text@ha
addi 3,3,kernel_text@l
#if 0
mr 5,6
#endif
bl powerpc_init
bl mi_startup
b OF_exit
#if 0 /* XXX: We may switch back to this in the future. */
/*
* OpenFirmware entry point
*/
ENTRY(openfirmware)
mflr 0 /* save return address */
stw 0,4(1)
stwu 1,-16(1) /* setup stack frame */
mfmsr 4 /* save msr */
stw 4,8(1)
lis 4,openfirmware_entry@ha /* get firmware entry point */
lwz 4,openfirmware_entry@l(4)
mtlr 4
li 0,0 /* clear battable translations */
mtdbatu 2,0
mtdbatu 3,0
mtibatu 2,0
mtibatu 3,0
lis 4,ofmsr@ha /* Open Firmware msr */
lwz 4,ofmsr@l(4)
mtmsr 4
isync
lis 4,srsave@ha /* save old SR */
addi 4,4,srsave@l
li 5,0
1: mfsrin 0,5
stw 0,0(4)
addi 4,4,4
addis 5,5,0x10000000@h
cmpwi 5,0
bne 1b
lis 4,ofw_pmap@ha /* load OFW SR */
addi 4,4,ofw_pmap@l
lwz 0,PM_KERNELSR(4)
cmpwi 0,0 /* pm_sr[KERNEL_SR] == 0? */
beq 2f /* then skip (not initialized yet) */
li 5,0
1: lwz 0,0(4)
mtsrin 0,5
addi 4,4,4
addis 5,5,0x10000000@h
cmpwi 5,0
bne 1b
2:
blrl /* call Open Firmware */
mfmsr 4
li 5,PSL_IR|PSL_DR
andc 4,4,5
mtmsr 4
isync
lis 4,srsave@ha /* restore saved SR */
addi 4,4,srsave@l
li 5,0
1: lwz 0,0(4)
mtsrin 0,5
addi 4,4,4
addis 5,5,0x10000000@h
cmpwi 5,0
bne 1b
lwz 4,8(1) /* restore msr */
mtmsr 4
isync
lwz 1,0(1) /* and return */
lwz 0,4(1)
mtlr 0
blr
#endif
/*
* Switch to/from OpenFirmware real mode stack
*
* Note: has to be called as the very first thing in OpenFirmware interface
* routines.
* E.g.:
* int
* OF_xxx(arg1, arg2)
* type arg1, arg2;
* {
* static struct {
* char *name;
* int nargs;
* int nreturns;
* char *method;
* int arg1;
* int arg2;
* int ret;
* } args = {
* "xxx",
* 2,
* 1,
* };
*
* ofw_stack();
* args.arg1 = arg1;
* args.arg2 = arg2;
* if (openfirmware(&args) < 0)
* return -1;
* return args.ret;
* }
*/
.local firmstk
.comm firmstk,PAGE_SIZE,8
ENTRY(ofw_stack)
mfmsr 8 /* turn off interrupts */
andi. 0,8,~(PSL_EE|PSL_RI)@l
mtmsr 0
stw 8,4(1) /* abuse return address slot */
lwz 5,0(1) /* get length of stack frame */
subf 5,1,5
lis 7,firmstk+PAGE_SIZE-8@ha
addi 7,7,firmstk+PAGE_SIZE-8@l
lis 6,ofw_back@ha
addi 6,6,ofw_back@l
subf 4,5,7 /* make room for stack frame on
new stack */
stw 6,-4(7) /* setup return pointer */
stwu 1,-8(7)
stw 7,-8(4)
addi 3,1,8
addi 1,4,-8
subi 5,5,8
cmpw 3,4
beqlr
mr 0,5
addi 5,5,-1
cmpwi 0,0
beqlr
1: lwz 0,0(3)
stw 0,0(4)
addi 3,3,1
addi 4,4,1
mr 0,5
addi 5,5,-1
cmpwi 0,0
bne 1b
blr
ofw_back:
lwz 1,0(1) /* get callers original stack pointer */
lwz 0,4(1) /* get saved msr from abused slot */
mtmsr 0
lwz 1,0(1) /* return */
lwz 0,4(1)
mtlr 0
blr
/*
* Data used during primary/secondary traps/interrupts
*/
#define tempsave 0x2e0 /* primary save area for trap handling */
#define disisave 0x3e0 /* primary save area for dsi/isi traps */
#define INTSTK (8*1024) /* 8K interrupt stack */
.data
.align 4
intstk:
.space INTSTK /* interrupt stack */
GLOBAL(intr_depth)
.long -1 /* in-use marker */
#define SPILLSTK 1024 /* 1K spill stack */
.comm spillstk,SPILLSTK,8
/*
* This code gets copied to all the trap vectors
* (except ISI/DSI, ALI, the interrupts, and possibly the debugging
* traps when using IPKDB).
*/
.text
.globl trapcode,trapsize
trapcode:
mtsprg 1,1 /* save SP */
stmw 28,tempsave(0) /* free r28-r31 */
mflr 28 /* save LR */
mfcr 29 /* save CR */
/* Test whether we already had PR set */
mfsrr1 31
mtcr 31
bc 4,17,1f /* branch if PSL_PR is clear */
mfsprg 1,0
lwz 1,PC_CURPCB(1)
addi 1,1,USPACE /* stack is top of user struct */
1:
bla s_trap
trapsize = .-trapcode
/*
* For ALI: has to save DSISR and DAR
*/
.globl alitrap,alisize
alitrap:
mtsprg 1,1 /* save SP */
stmw 28,tempsave(0) /* free r28-r31 */
mfdar 30
mfdsisr 31
stmw 30,tempsave+16(0)
mflr 28 /* save LR */
mfcr 29 /* save CR */
/* Test whether we already had PR set */
mfsrr1 31
mtcr 31
bc 4,17,1f /* branch if PSL_PR is clear */
mfsprg 1,0
lwz 1,PC_CURPCB(1)
addi 1,1,USPACE /* stack is top of user struct */
1:
bla s_trap
alisize = .-alitrap
/*
* Similar to the above for DSI
* Has to handle BAT spills
* and standard pagetable spills
*/
.globl dsitrap,dsisize
dsitrap:
stmw 28,disisave(0) /* free r28-r31 */
mfcr 29 /* save CR */
mfxer 30 /* save XER */
mtsprg 2,30 /* in SPRG2 */
mfsrr1 31 /* test kernel mode */
mtcr 31
bc 12,17,1f /* branch if PSL_PR is set */
mfdar 31 /* get fault address */
rlwinm 31,31,7,25,28 /* get segment * 8 */
/* get batu */
addis 31,31,battable@ha
lwz 30,battable@l(31)
mtcr 30
bc 4,30,1f /* branch if supervisor valid is
false */
/* get batl */
lwz 31,battable+4@l(31)
/* We randomly use the highest two bat registers here */
mftb 28
andi. 28,28,1
bne 2f
mtdbatu 2,30
mtdbatl 2,31
b 3f
2:
mtdbatu 3,30
mtdbatl 3,31
3:
mfsprg 30,2 /* restore XER */
mtxer 30
mtcr 29 /* restore CR */
lmw 28,disisave(0) /* restore r28-r31 */
rfi /* return to trapped code */
1:
mflr 28 /* save LR */
bla s_dsitrap
dsisize = .-dsitrap
/*
* Similar to the above for ISI
*/
.globl isitrap,isisize
isitrap:
stmw 28,disisave(0) /* free r28-r31 */
mflr 28 /* save LR */
mfcr 29 /* save CR */
mfsrr1 31 /* test kernel mode */
mtcr 31
bc 12,17,1f /* branch if PSL_PR is set */
mfsrr0 31 /* get fault address */
rlwinm 31,31,7,25,28 /* get segment * 8 */
/* get batu */
addis 31,31,battable@ha
lwz 30,battable@l(31)
mtcr 30
bc 4,30,1f /* branch if supervisor valid is
false */
mtibatu 3,30
/* get batl */
lwz 30,battable+4@l(31)
mtibatl 3,30
mtcr 29 /* restore CR */
lmw 28,disisave(0) /* restore r28-r31 */
rfi /* return to trapped code */
1:
bla s_isitrap
isisize = .-isitrap
/*
* This one for the external interrupt handler.
*/
.globl extint,extsize
extint:
mtsprg 1,1 /* save SP */
stmw 28,tempsave(0) /* free r28-r31 */
mflr 28 /* save LR */
mfcr 29 /* save CR */
mfxer 30 /* save XER */
lis 1,intstk+INTSTK@ha /* get interrupt stack */
addi 1,1,intstk+INTSTK@l
lwz 31,0(1) /* were we already running on intstk? */
addic. 31,31,1
stw 31,0(1)
beq 1f
mfsprg 1,1 /* yes, get old SP */
1:
ba extintr
extsize = .-extint
/*
* And this one for the decrementer interrupt handler.
*/
.globl decrint,decrsize
decrint:
mtsprg 1,1 /* save SP */
stmw 28,tempsave(0) /* free r28-r31 */
lis 28,decrnest@ha
lwz 29,decrnest@l(28)
cmplwi 0,29,0
bne 2f
li 29,1
stw 29,decrnest@l(28)
mflr 28 /* save LR */
mfcr 29 /* save CR */
mfxer 30 /* save XER */
lis 1,intstk+INTSTK@ha /* get interrupt stack */
addi 1,1,intstk+INTSTK@l
lwz 31,0(1) /* were we already running on intstk? */
addic. 31,31,1
stw 31,0(1)
beq 1f
mfsprg 1,1 /* yes, get old SP */
1:
ba decrintr
2:
lmw 28,tempsave(0)
rfi
decrsize = .-decrint
/*
* Now the tlb software load for 603 processors:
* (Code essentially from the 603e User Manual, Chapter 5, but
* corrected a lot.)
*/
#define DMISS 976
#define DCMP 977
#define HASH1 978
#define HASH2 979
#define IMISS 980
#define ICMP 981
#define RPA 982
.globl tlbimiss,tlbimsize
tlbimiss:
mfspr 2,HASH1 /* get first pointer */
li 1,8
mfctr 0 /* save counter */
mfspr 3,ICMP /* get first compare value */
addi 2,2,-8 /* predec pointer */
1:
mtctr 1 /* load counter */
2:
lwzu 1,8(2) /* get next pte */
cmpl 0,1,3 /* see if found pte */
bdneq 2b /* loop if not eq */
bne 3f /* not found */
lwz 1,4(2) /* load tlb entry lower word */
andi. 3,1,8 /* check G-bit */
bne 4f /* if guarded, take ISI */
mtctr 0 /* restore counter */
mfspr 0,IMISS /* get the miss address for the tlbli */
mfsrr1 3 /* get the saved cr0 bits */
mtcrf 0x80,3 /* and restore */
ori 1,1,0x100 /* set the reference bit */
mtspr RPA,1 /* set the pte */
srwi 1,1,8 /* get byte 7 of pte */
tlbli 0 /* load the itlb */
stb 1,6(2) /* update page table */
rfi
3: /* not found in pteg */
andi. 1,3,0x40 /* have we already done second hash? */
bne 5f
mfspr 2,HASH2 /* get the second pointer */
ori 3,3,0x40 /* change the compare value */
li 1,8
addi 2,2,-8 /* predec pointer */
b 1b
4: /* guarded */
mfsrr1 3
andi. 2,3,0xffff /* clean upper srr1 */
oris 2,2,0x8000000@h /* set srr<4> to flag prot violation */
b 6f
5: /* not found anywhere */
mfsrr1 3
andi. 2,3,0xffff /* clean upper srr1 */
oris 2,2,0x40000000@h /* set srr1<1> to flag pte not found */
6:
mtctr 0 /* restore counter */
mtsrr1 2
mfmsr 0
xoris 0,0,0x20000@h /* flip the msr<tgpr> bit */
mtcrf 0x80,3 /* restore cr0 */
mtmsr 0 /* now with native gprs */
isync
ba EXC_ISI
tlbimsize = .-tlbimiss
.globl tlbdlmiss,tlbdlmsize
tlbdlmiss:
mfspr 2,HASH1 /* get first pointer */
li 1,8
mfctr 0 /* save counter */
mfspr 3,DCMP /* get first compare value */
addi 2,2,-8 /* predec pointer */
1:
mtctr 1 /* load counter */
2:
lwzu 1,8(2) /* get next pte */
cmpl 0,1,3 /* see if found pte */
bdneq 2b /* loop if not eq */
bne 3f /* not found */
lwz 1,4(2) /* load tlb entry lower word */
mtctr 0 /* restore counter */
mfspr 0,DMISS /* get the miss address for the tlbld */
mfsrr1 3 /* get the saved cr0 bits */
mtcrf 0x80,3 /* and restore */
ori 1,1,0x100 /* set the reference bit */
mtspr RPA,1 /* set the pte */
srwi 1,1,8 /* get byte 7 of pte */
tlbld 0 /* load the dtlb */
stb 1,6(2) /* update page table */
rfi
3: /* not found in pteg */
andi. 1,3,0x40 /* have we already done second hash? */
bne 5f
mfspr 2,HASH2 /* get the second pointer */
ori 3,3,0x40 /* change the compare value */
li 1,8
addi 2,2,-8 /* predec pointer */
b 1b
5: /* not found anywhere */
mfsrr1 3
lis 1,0x40000000@h /* set dsisr<1> to flag pte not found */
mtctr 0 /* restore counter */
andi. 2,3,0xffff /* clean upper srr1 */
mtsrr1 2
mtdsisr 1 /* load the dsisr */
mfspr 1,DMISS /* get the miss address */
mtdar 1 /* put in dar */
mfmsr 0
xoris 0,0,0x20000@h /* flip the msr<tgpr> bit */
mtcrf 0x80,3 /* restore cr0 */
mtmsr 0 /* now with native gprs */
isync
ba EXC_DSI
tlbdlmsize = .-tlbdlmiss
.globl tlbdsmiss,tlbdsmsize
tlbdsmiss:
mfspr 2,HASH1 /* get first pointer */
li 1,8
mfctr 0 /* save counter */
mfspr 3,DCMP /* get first compare value */
addi 2,2,-8 /* predec pointer */
1:
mtctr 1 /* load counter */
2:
lwzu 1,8(2) /* get next pte */
cmpl 0,1,3 /* see if found pte */
bdneq 2b /* loop if not eq */
bne 3f /* not found */
lwz 1,4(2) /* load tlb entry lower word */
andi. 3,1,0x80 /* check the C-bit */
beq 4f
5:
mtctr 0 /* restore counter */
mfspr 0,DMISS /* get the miss address for the tlbld */
mfsrr1 3 /* get the saved cr0 bits */
mtcrf 0x80,3 /* and restore */
mtspr RPA,1 /* set the pte */
tlbld 0 /* load the dtlb */
rfi
3: /* not found in pteg */
andi. 1,3,0x40 /* have we already done second hash? */
bne 5f
mfspr 2,HASH2 /* get the second pointer */
ori 3,3,0x40 /* change the compare value */
li 1,8
addi 2,2,-8 /* predec pointer */
b 1b
4: /* found, but C-bit = 0 */
rlwinm. 3,1,30,0,1 /* test PP */
bge- 7f
andi. 3,1,1
beq+ 8f
9: /* found, but protection violation (PP==00)*/
mfsrr1 3
lis 1,0xa000000@h /* indicate protection violation
on store */
b 1f
7: /* found, PP=1x */
mfspr 3,DMISS /* get the miss address */
mfsrin 1,3 /* get the segment register */
mfsrr1 3
rlwinm 3,3,18,31,31 /* get PR-bit */
rlwnm. 2,2,3,1,1 /* get the key */
bne- 9b /* protection violation */
8: /* found, set reference/change bits */
lwz 1,4(2) /* reload tlb entry */
ori 1,1,0x180
sth 1,6(2)
b 5b
5: /* not found anywhere */
mfsrr1 3
lis 1,0x42000000@h /* set dsisr<1> to flag pte not found */
/* dsisr<6> to flag store */
1:
mtctr 0 /* restore counter */
andi. 2,3,0xffff /* clean upper srr1 */
mtsrr1 2
mtdsisr 1 /* load the dsisr */
mfspr 1,DMISS /* get the miss address */
mtdar 1 /* put in dar */
mfmsr 0
xoris 0,0,0x20000@h /* flip the msr<tgpr> bit */
mtcrf 0x80,3 /* restore cr0 */
mtmsr 0 /* now with native gprs */
isync
ba EXC_DSI
tlbdsmsize = .-tlbdsmiss
#ifdef DDB
#define ddbsave 0xde0 /* primary save area for DDB */
/*
* In case of DDB we want a separate trap catcher for it
*/
.local ddbstk
.comm ddbstk,INTSTK,8 /* ddb stack */
.globl ddblow,ddbsize
ddblow:
mtsprg 1,1 /* save SP */
stmw 28,ddbsave(0) /* free r28-r31 */
mflr 28 /* save LR */
mfcr 29 /* save CR */
lis 1,ddbstk+INTSTK@ha /* get new SP */
addi 1,1,ddbstk+INTSTK@l
bla ddbtrap
ddbsize = .-ddblow
#endif /* DDB */
#ifdef IPKDB
#define ipkdbsave 0xde0 /* primary save area for IPKDB */
/*
* In case of IPKDB we want a separate trap catcher for it
*/
.local ipkdbstk
.comm ipkdbstk,INTSTK,8 /* ipkdb stack */
.globl ipkdblow,ipkdbsize
ipkdblow:
mtsprg 1,1 /* save SP */
stmw 28,ipkdbsave(0) /* free r28-r31 */
mflr 28 /* save LR */
mfcr 29 /* save CR */
lis 1,ipkdbstk+INTSTK@ha /* get new SP */
addi 1,1,ipkdbstk+INTSTK@l
bla ipkdbtrap
ipkdbsize = .-ipkdblow
#endif /* IPKDB */
/*
* FRAME_SETUP assumes:
* SPRG1 SP (1)
* savearea r28-r31,DAR,DSISR (DAR & DSISR only for DSI traps)
* 28 LR
* 29 CR
* 1 kernel stack
* LR trap type
* SRR0/1 as at start of trap
*/
#define FRAME_SETUP(savearea) \
/* Have to enable translation to allow access of kernel stack: */ \
mfsrr0 30; \
mfsrr1 31; \
stmw 30,savearea+24(0); \
mfmsr 30; \
ori 30,30,(PSL_DR|PSL_IR); \
mtmsr 30; \
isync; \
mfsprg 31,1; \
stwu 31,-FRAMELEN(1); \
stw 0,FRAME_0+8(1); \
stw 31,FRAME_1+8(1); \
stw 28,FRAME_LR+8(1); \
stw 29,FRAME_CR+8(1); \
lmw 28,savearea(0); \
stmw 2,FRAME_2+8(1); \
lmw 28,savearea+16(0); \
mfxer 3; \
mfctr 4; \
mflr 5; \
andi. 5,5,0xff00; \
stw 3,FRAME_XER+8(1); \
stw 4,FRAME_CTR+8(1); \
stw 5,FRAME_EXC+8(1); \
stw 28,FRAME_DAR+8(1); \
stw 29,FRAME_DSISR+8(1); \
stw 30,FRAME_SRR0+8(1); \
stw 31,FRAME_SRR1+8(1)
#define FRAME_LEAVE(savearea) \
/* Now restore regs: */ \
lwz 2,FRAME_SRR0+8(1); \
lwz 3,FRAME_SRR1+8(1); \
lwz 4,FRAME_CTR+8(1); \
lwz 5,FRAME_XER+8(1); \
lwz 6,FRAME_LR+8(1); \
lwz 7,FRAME_CR+8(1); \
stw 2,savearea(0); \
stw 3,savearea+4(0); \
mtctr 4; \
mtxer 5; \
mtlr 6; \
mtsprg 1,7; /* save cr */ \
lmw 2,FRAME_2+8(1); \
lwz 0,FRAME_0+8(1); \
lwz 1,FRAME_1+8(1); \
mtsprg 2,2; /* save r2 & r3 */ \
mtsprg 3,3; \
/* Disable translation, machine check and recoverability: */ \
mfmsr 2; \
andi. 2,2,~(PSL_DR|PSL_IR|PSL_ME|PSL_RI)@l; \
mtmsr 2; \
isync; \
/* Decide whether we return to user mode: */ \
lwz 3,savearea+4(0); \
mtcr 3; \
bc 4,17,1f; /* branch if PSL_PR is false */ \
/* Restore user & kernel access SR: */ \
/* lis 2,curpm@ha; get real address of pmap */ \
/* lwz 2,curpm@l(2); */ \
/* lwz 3,PM_USRSR(2); */ \
/* mtsr USER_SR,3; */ \
/* lwz 3,PM_KERNELSR(2); */ \
/* mtsr KERNEL_SR,3; */ \
1: mfsprg 2,1; /* restore cr */ \
mtcr 2; \
lwz 2,savearea(0); \
lwz 3,savearea+4(0); \
mtsrr0 2; \
mtsrr1 3; \
mfsprg 2,2; /* restore r2 & r3 */ \
mfsprg 3,3
/*
* Preamble code for DSI/ISI traps
*/
disitrap:
lmw 30,disisave(0)
stmw 30,tempsave(0)
lmw 30,disisave+8(0)
stmw 30,tempsave+8(0)
mfdar 30
mfdsisr 31
stmw 30,tempsave+16(0)
realtrap:
/* Test whether we already had PR set */
mfsrr1 1
mtcr 1
mfsprg 1,1 /* restore SP (might have been
overwritten) */
bc 4,17,s_trap /* branch if PSL_PR is false */
mfsprg 1,0
lwz 1,PC_CURPCB(1)
addi 1,1,USPACE /* stack is top of user struct */
/*
* Now the common trap catching code.
*/
s_trap:
/* First have to enable KERNEL mapping */
lis 31,KERNEL_SEGMENT@h
ori 31,31,KERNEL_SEGMENT@l
mtsr KERNEL_SR,31
FRAME_SETUP(tempsave)
/* Now we can recover interrupts again: */
mfmsr 7
ori 7,7,(PSL_EE|PSL_FP|PSL_ME|PSL_RI)@l
mtmsr 7
isync
/* Call C trap code: */
addi 3,1,8
mr 30,3
bl trap
mr 3,30
bl ast
FRAME_LEAVE(tempsave)
rfi
/*
* DSI second stage fault handler
*/
s_dsitrap:
mfdsisr 31 /* test whether this may be a
spill fault */
mtcr 31
mtsprg 1,1 /* save SP */
bc 4,1,disitrap /* branch if table miss is false */
lis 1,spillstk+SPILLSTK@ha
addi 1,1,spillstk+SPILLSTK@l /* get spill stack */
stwu 1,-52(1)
stw 0,48(1) /* save non-volatile registers */
stw 3,44(1)
stw 4,40(1)
stw 5,36(1)
stw 6,32(1)
stw 7,28(1)
stw 8,24(1)
stw 9,20(1)
stw 10,16(1)
stw 11,12(1)
stw 12,8(1)
mflr 30 /* save trap type */
mfctr 31 /* & CTR */
mfdar 3
s_pte_spill:
bl pmap_pte_spill /* try a spill */
or. 3,3,3
mtctr 31 /* restore CTR */
mtlr 30 /* and trap type */
mfsprg 31,2 /* get saved XER */
mtxer 31 /* restore XER */
lwz 12,8(1) /* restore non-volatile registers */
lwz 11,12(1)
lwz 10,16(1)
lwz 9,20(1)
lwz 8,24(1)
lwz 7,28(1)
lwz 6,32(1)
lwz 5,36(1)
lwz 4,40(1)
lwz 3,44(1)
lwz 0,48(1)
beq disitrap
mfsprg 1,1 /* restore SP */
mtcr 29 /* restore CR */
mtlr 28 /* restore LR */
lmw 28,disisave(0) /* restore r28-r31 */
rfi /* return to trapped code */
/*
* ISI second stage fault handler
*/
s_isitrap:
mfsrr1 31 /* test whether this may be a
spill fault */
mtcr 31
mtsprg 1,1 /* save SP */
bc 4,1,disitrap /* branch if table miss is false */
lis 1,spillstk+SPILLSTK@ha
addi 1,1,spillstk+SPILLSTK@l /* get spill stack */
stwu 1,-52(1)
stw 0,48(1) /* save non-volatile registers */
stw 3,44(1)
stw 4,40(1)
stw 5,36(1)
stw 6,32(1)
stw 7,28(1)
stw 8,24(1)
stw 9,20(1)
stw 10,16(1)
stw 11,12(1)
stw 12,8(1)
mfxer 30 /* save XER */
mtsprg 2,30
mflr 30 /* save trap type */
mfctr 31 /* & ctr */
mfsrr0 3
b s_pte_spill /* above */
/*
* External interrupt second level handler
*/
#define INTRENTER \
/* Save non-volatile registers: */ \
stwu 1,-88(1); /* temporarily */ \
stw 0,84(1); \
mfsprg 0,1; /* get original SP */ \
stw 0,0(1); /* and store it */ \
stw 3,80(1); \
stw 4,76(1); \
stw 5,72(1); \
stw 6,68(1); \
stw 7,64(1); \
stw 8,60(1); \
stw 9,56(1); \
stw 10,52(1); \
stw 11,48(1); \
stw 12,44(1); \
stw 28,40(1); /* saved LR */ \
stw 29,36(1); /* saved CR */ \
stw 30,32(1); /* saved XER */ \
lmw 28,tempsave(0); /* restore r28-r31 */ \
mfctr 6; \
lis 5,intr_depth@ha; \
lwz 5,intr_depth@l(5); \
mfsrr0 4; \
mfsrr1 3; \
stw 6,28(1); \
stw 5,20(1); \
stw 4,12(1); \
stw 3,8(1); \
/* interrupts are recoverable here, and enable translation */ \
lis 3,(KERNEL_SEGMENT|SR_KS|SR_KP)@h; \
ori 3,3,(KERNEL_SEGMENT|SR_KS|SR_KP)@l; \
mtsr KERNEL_SR,3; \
mfmsr 5; \
ori 5,5,(PSL_IR|PSL_DR|PSL_RI); \
mtmsr 5; \
isync
.globl extint_call
extintr:
INTRENTER
extint_call:
bl extint_call /* to be filled in later */
intr_exit:
/* Disable interrupts (should already be disabled) and MMU here: */
mfmsr 3
andi. 3,3,~(PSL_EE|PSL_ME|PSL_RI|PSL_DR|PSL_IR)@l
mtmsr 3
isync
/* restore possibly overwritten registers: */
lwz 12,44(1)
lwz 11,48(1)
lwz 10,52(1)
lwz 9,56(1)
lwz 8,60(1)
lwz 7,64(1)
lwz 6,8(1)
lwz 5,12(1)
lwz 4,28(1)
lwz 3,32(1)
mtsrr1 6
mtsrr0 5
mtctr 4
mtxer 3
/* Returning to user mode? */
mtcr 6 /* saved SRR1 */
bc 4,17,1f /* branch if PSL_PR is false */
mfsprg 3,0 /* get pcpu */
lwz 3,PC_CURPCB(3) /* get curpcb from pcpu */
lwz 3,PCB_PMR(3) /* get pmap real address from curpcb */
mtsr KERNEL_SR,3
/* Setup for entry to realtrap: */
lwz 3,0(1) /* get saved SP */
mtsprg 1,3
#if 0 /* XXX */
li 6,EXC_AST
#endif
stmw 28,tempsave(0) /* establish tempsave again */
mtlr 6
lwz 28,40(1) /* saved LR */
lwz 29,36(1) /* saved CR */
lwz 6,68(1)
lwz 5,72(1)
lwz 4,76(1)
lwz 3,80(1)
lwz 0,84(1)
lis 30,intr_depth@ha /* adjust reentrancy count */
lwz 31,intr_depth@l(30)
addi 31,31,-1
stw 31,intr_depth@l(30)
b realtrap /* XXX: should call ast(frame ptr) */
1:
/* Here is the normal exit of extintr: */
lwz 5,36(1)
lwz 6,40(1)
mtcr 5
mtlr 6
lwz 6,68(1)
lwz 5,72(1)
lis 3,intr_depth@ha /* adjust reentrancy count */
lwz 4,intr_depth@l(3)
addi 4,4,-1
stw 4,intr_depth@l(3)
lwz 4,76(1)
lwz 3,80(1)
lwz 0,84(1)
lwz 1,0(1)
rfi
/*
* Decrementer interrupt second level handler
*/
decrintr:
INTRENTER
addi 3,1,8 /* intr frame */
bl decr_intr
lis 28,decrnest@ha
xor 29,29,29
stw 29,decrnest@l(28)
b intr_exit
#ifdef DDB
/*
* Deliberate entry to ddbtrap
*/
.globl ddb_trap
ddb_trap:
mtsprg 1,1
mfmsr 3
mtsrr1 3
andi. 3,3,~(PSL_EE|PSL_ME|PSL_RI)@l
mtmsr 3 /* disable interrupts */
isync
stmw 28,ddbsave(0)
mflr 28
li 29,EXC_BPT
mtlr 29
mfcr 29
mtsrr0 28
/*
* Now the ddb trap catching code.
*/
ddbtrap:
FRAME_SETUP(ddbsave)
/* Call C trap code: */
addi 3,1,8
bl ddb_trap_glue
or. 3,3,3
bne ddbleave
/* This wasn't for DDB, so switch to real trap: */
lwz 3,FRAME_EXC+8(1) /* save exception */
stw 3,ddbsave+8(0)
FRAME_LEAVE(ddbsave)
mtsprg 1,1 /* prepare for entrance to realtrap */
stmw 28,tempsave(0)
mflr 28
mfcr 29
lwz 31,ddbsave+8(0)
mtlr 31
b realtrap
ddbleave:
FRAME_LEAVE(ddbsave)
rfi
#endif /* DDB */
#ifdef IPKDB
/*
* Deliberate entry to ipkdbtrap
*/
.globl ipkdb_trap
ipkdb_trap:
mtsprg 1,1
mfmsr 3
mtsrr1 3
andi. 3,3,~(PSL_EE|PSL_ME|PSL_RI)@l
mtmsr 3 /* disable interrupts */
isync
stmw 28,ipkdbsave(0)
mflr 28
li 29,EXC_BPT
mtlr 29
mfcr 29
mtsrr0 28
/*
* Now the ipkdb trap catching code.
*/
ipkdbtrap:
FRAME_SETUP(ipkdbsave)
/* Call C trap code: */
addi 3,1,8
bl ipkdb_trap_glue
or. 3,3,3
bne ipkdbleave
/* This wasn't for IPKDB, so switch to real trap: */
lwz 3,FRAME_EXC+8(1) /* save exception */
stw 3,ipkdbsave+8(0)
FRAME_LEAVE(ipkdbsave)
mtsprg 1,1 /* prepare for entrance to realtrap */
stmw 28,tempsave(0)
mflr 28
mfcr 29
lwz 31,ipkdbsave+8(0)
mtlr 31
b realtrap
ipkdbleave:
FRAME_LEAVE(ipkdbsave)
rfi
ipkdbfault:
ba _ipkdbfault
_ipkdbfault:
mfsrr0 3
addi 3,3,4
mtsrr0 3
li 3,-1
rfi
/*
* int ipkdbfbyte(unsigned char *p)
*/
.globl ipkdbfbyte
ipkdbfbyte:
li 9,EXC_DSI /* establish new fault routine */
lwz 5,0(9)
lis 6,ipkdbfault@ha
lwz 6,ipkdbfault@l(6)
stw 6,0(9)
#ifdef IPKDBUSERHACK
lis 8,ipkdbsr@ha
lwz 8,ipkdbsr@l(8)
mtsr USER_SR,8
isync
#endif
dcbst 0,9 /* flush data... */
sync
icbi 0,9 /* and instruction caches */
lbz 3,0(3) /* fetch data */
stw 5,0(9) /* restore previous fault handler */
dcbst 0,9 /* and flush data... */
sync
icbi 0,9 /* and instruction caches */
blr
/*
* int ipkdbsbyte(unsigned char *p, int c)
*/
.globl ipkdbsbyte
ipkdbsbyte:
li 9,EXC_DSI /* establish new fault routine */
lwz 5,0(9)
lis 6,ipkdbfault@ha
lwz 6,ipkdbfault@l(6)
stw 6,0(9)
#ifdef IPKDBUSERHACK
lis 8,ipkdbsr@ha
lwz 8,ipkdbsr@l(8)
mtsr USER_SR,8
isync
#endif
dcbst 0,9 /* flush data... */
sync
icbi 0,9 /* and instruction caches */
mr 6,3
xor 3,3,3
stb 4,0(6)
dcbst 0,6 /* Now do appropriate flushes
to data... */
sync
icbi 0,6 /* and instruction caches */
stw 5,0(9) /* restore previous fault handler */
dcbst 0,9 /* and flush data... */
sync
icbi 0,9 /* and instruction caches */
blr
#endif /* IPKDB */
/*
* int setfault()
*
* Similar to setjmp to setup for handling faults on accesses to user memory.
* Any routine using this may only call bcopy, either the form below,
* or the (currently used) C code optimized, so it doesn't use any non-volatile
* registers.
*/
.globl setfault
setfault:
mflr 0
mfcr 12
mfsprg 4,0
lwz 4,PC_CURPCB(4)
stw 3,PCB_ONFAULT(4)
stw 0,0(3)
stw 1,4(3)
stw 2,8(3)
stmw 12,12(3)
xor 3,3,3
blr
/*
* Signal "trampoline" code.
*/
.globl sigcode
sigcode:
b sys_exit
esigcode:
.data
GLOBAL(szsigcode)
.long esigcode-sigcode
.text