90c38ed200
a group of dos emulator developers. Submitted by: Jonathan Lemon <jlemon@americantv.com> Obtained from: BSDI
90 lines
2.6 KiB
Plaintext
90 lines
2.6 KiB
Plaintext
/* BSDI README.booting_dos,v 2.2 1996/04/08 19:32:18 bostic Exp*/
|
|
|
|
To install DOS on a pseudo hard disk under doscmd:
|
|
|
|
1) Create a .doscmdrc with at least the following:
|
|
|
|
assign A: /dev/rfd0_1440_3.5 1440
|
|
assign A: /dev/rfd0_720_3.5 720
|
|
assign hard boot_drive 80 2 2
|
|
|
|
You may need to adjust the raw files for the A: drive to match
|
|
your system. This example will cause the HD drive to be tried
|
|
first and the DD drive second.
|
|
|
|
Note that you should only use raw devices or files at this point,
|
|
do not use a cooked device! (Well, it would probably be okay
|
|
for a hard disk, but certainly not the floppy)
|
|
|
|
boot_drive should be the file name of where you want your bootable
|
|
image to be. The three numbers which follow "80 2 2" say that the
|
|
drive will have 80 cylinders, 2 heads and 2 sectors per track.
|
|
This is the smallest drive possible which still can have MS DOS
|
|
5.0 installed on it along with a config.sys and autoexec.bat file.
|
|
|
|
You might want to create a larger boot drive.
|
|
|
|
The file boot_drive must exist, so use the command touch to create
|
|
it.
|
|
|
|
2) Insert a floppy disk into the A: drive which is bootable to MS-DOS
|
|
and has the commands fdisk, format and sys on it. You should also
|
|
copy the file instbsdi.exe onto the floppy by either mounting it
|
|
with the msdos file system type or by using mtools.
|
|
|
|
(i.e. mwrite instbsdi.exe a:)
|
|
|
|
3) run doscmd.
|
|
|
|
4) At the > prompt type "fdisk"
|
|
|
|
5) Select "Create DOS partition or Logical Drive"
|
|
|
|
6) Select "Create Primary DOS Partition"
|
|
|
|
7) Tell it how big to make it (I say use the whole drive.
|
|
It is pretty tiny after all.)
|
|
|
|
8) Get out of FDISK by hitting <ESC> a few times.
|
|
|
|
9) doscmd will now abort (will try and fix this in a future version)
|
|
|
|
10) start up doscmd again, leaving the floppy in the drive.
|
|
|
|
11) At the > prompt, type "format c:" and follow the instructions.
|
|
|
|
12) At the > prompt type "sys c:"
|
|
|
|
13) Get out of doscmd.
|
|
|
|
14) Either remove the floppy from the drive or add the line
|
|
|
|
boot C:
|
|
|
|
to your .doscmdrc
|
|
|
|
15) You should now be running DOS off of your new disk. You will
|
|
probably want both config.sys and an autoexec.bat file. To
|
|
start with, you can say:
|
|
|
|
> copy con: config.sys
|
|
LASTDRIVE=Z
|
|
^Z
|
|
> copy con: autoexec.bat
|
|
@echo off
|
|
instbsdi.exe
|
|
^Z
|
|
|
|
|
|
16) Quit doscmd.
|
|
|
|
17) You know have a bootable pseudo disk which will automatically call
|
|
the magic "instbsdi" program, which installs BSDI disks. To use
|
|
them add lines to your .doscmdrc such as:
|
|
|
|
assign D: /usr/dos
|
|
assign P: -ro /usr/prb
|
|
|
|
Not ethat you will not always be able to access every file due to
|
|
naming problems.
|