freebsd-dev/sys/mips/atheros/ar71xx_machdep.c
Adrian Chadd 8c56b727e4 Fix the Atheros MIPS startup path a little.
* Print out the platform frequency the same as the other frequencies.
* Print out the MDIO frequency.
* Optionally do GMAC and ethernet switch setup if required.

Tested:

* AR9344
2013-10-15 01:37:00 +00:00

299 lines
7.5 KiB
C

/*-
* Copyright (c) 2009 Oleksandr Tymoshenko
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include "opt_ar71xx.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/cons.h>
#include <sys/kdb.h>
#include <sys/reboot.h>
#include <vm/vm.h>
#include <vm/vm_page.h>
#include <net/ethernet.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/md_var.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#include <mips/atheros/ar71xxreg.h>
#include <mips/atheros/ar71xx_setup.h>
#include <mips/atheros/ar71xx_cpudef.h>
#include <mips/sentry5/s5reg.h>
extern char edata[], end[];
uint32_t ar711_base_mac[ETHER_ADDR_LEN];
/* 4KB static data aread to keep a copy of the bootload env until
the dynamic kenv is setup */
char boot1_env[4096];
/*
* We get a string in from Redboot with the all the arguments together,
* "foo=bar bar=baz". Split them up and save in kenv.
*/
static void
parse_argv(char *str)
{
char *n, *v;
while ((v = strsep(&str, " ")) != NULL) {
if (*v == '\0')
continue;
if (*v == '-') {
while (*v != '\0') {
v++;
switch (*v) {
case 'a': boothowto |= RB_ASKNAME; break;
case 'd': boothowto |= RB_KDB; break;
case 'g': boothowto |= RB_GDB; break;
case 's': boothowto |= RB_SINGLE; break;
case 'v': boothowto |= RB_VERBOSE; break;
}
}
} else {
n = strsep(&v, "=");
if (v == NULL)
setenv(n, "1");
else
setenv(n, v);
}
}
}
void
platform_cpu_init()
{
/* Nothing special */
}
void
platform_reset(void)
{
ar71xx_device_stop(RST_RESET_FULL_CHIP);
/* Wait for reset */
while(1)
;
}
/*
* Obtain the MAC address via the Redboot environment.
*/
static void
ar71xx_redboot_get_macaddr(void)
{
char *var;
int count = 0;
/*
* "ethaddr" is passed via envp on RedBoot platforms
* "kmac" is passed via argv on RouterBOOT platforms
*/
if ((var = getenv("ethaddr")) != NULL ||
(var = getenv("kmac")) != NULL) {
count = sscanf(var, "%x%*c%x%*c%x%*c%x%*c%x%*c%x",
&ar711_base_mac[0], &ar711_base_mac[1],
&ar711_base_mac[2], &ar711_base_mac[3],
&ar711_base_mac[4], &ar711_base_mac[5]);
if (count < 6)
memset(ar711_base_mac, 0,
sizeof(ar711_base_mac));
freeenv(var);
}
}
void
platform_start(__register_t a0 __unused, __register_t a1 __unused,
__register_t a2 __unused, __register_t a3 __unused)
{
uint64_t platform_counter_freq;
int argc = 0, i;
char **argv = NULL, **envp = NULL;
vm_offset_t kernend;
/*
* clear the BSS and SBSS segments, this should be first call in
* the function
*/
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
/*
* Until some more sensible abstractions for uboot/redboot
* environment handling, we have to make this a compile-time
* hack. The existing code handles the uboot environment
* very incorrectly so we should just ignore initialising
* the relevant pointers.
*/
#ifndef AR71XX_ENV_UBOOT
argc = a0;
argv = (char**)a1;
envp = (char**)a2;
#endif
/*
* Protect ourselves from garbage in registers
*/
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i += 2) {
if (strcmp(envp[i], "memsize") == 0)
realmem = btoc(strtoul(envp[i+1], NULL, 16));
}
}
/*
* Just wild guess. RedBoot let us down and didn't reported
* memory size
*/
if (realmem == 0)
realmem = btoc(32*1024*1024);
/*
* Allow build-time override in case Redboot lies
* or in other situations (eg where there's u-boot)
* where there isn't (yet) a convienent method of
* being told how much RAM is available.
*
* This happens on at least the Ubiquiti LS-SR71A
* board, where redboot says there's 16mb of RAM
* but in fact there's 32mb.
*/
#if defined(AR71XX_REALMEM)
realmem = btoc(AR71XX_REALMEM);
#endif
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
dump_avail[0] = phys_avail[0];
dump_avail[1] = phys_avail[1] - phys_avail[0];
physmem = realmem;
/*
* ns8250 uart code uses DELAY so ticker should be inititalized
* before cninit. And tick_init_params refers to hz, so * init_param1
* should be called first.
*/
init_param1();
/* Detect the system type - this is needed for subsequent chipset-specific calls */
ar71xx_detect_sys_type();
ar71xx_detect_sys_frequency();
platform_counter_freq = ar71xx_cpu_freq();
mips_timer_init_params(platform_counter_freq, 1);
cninit();
init_static_kenv(boot1_env, sizeof(boot1_env));
printf("CPU platform: %s\n", ar71xx_get_system_type());
printf("CPU Frequency=%d MHz\n", u_ar71xx_cpu_freq / 1000000);
printf("CPU DDR Frequency=%d MHz\n", u_ar71xx_ddr_freq / 1000000);
printf("CPU AHB Frequency=%d MHz\n", u_ar71xx_ahb_freq / 1000000);
printf("platform frequency: %lld MHz\n", platform_counter_freq / 1000000);
printf("CPU reference clock: %d MHz\n", u_ar71xx_refclk / 1000000);
printf("CPU MDIO clock: %d MHz\n", u_ar71xx_mdio_freq / 1000000);
printf("arguments: \n");
printf(" a0 = %08x\n", a0);
printf(" a1 = %08x\n", a1);
printf(" a2 = %08x\n", a2);
printf(" a3 = %08x\n", a3);
/*
* XXX this code is very redboot specific.
*/
printf("Cmd line:");
if (MIPS_IS_VALID_PTR(argv)) {
for (i = 0; i < argc; i++) {
printf(" %s", argv[i]);
parse_argv(argv[i]);
}
}
else
printf ("argv is invalid");
printf("\n");
printf("Environment:\n");
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i+=2) {
printf(" %s = %s\n", envp[i], envp[i+1]);
setenv(envp[i], envp[i+1]);
}
}
else
printf ("envp is invalid\n");
/* Redboot if_arge MAC address is in the environment */
ar71xx_redboot_get_macaddr();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
/*
* Reset USB devices
*/
ar71xx_init_usb_peripheral();
/*
* Reset internal ethernet switch, if one exists
*/
ar71xx_reset_ethernet_switch();
/*
* Initialise the gmac driver.
*/
ar71xx_init_gmac();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}