d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2e14174893
freebsd-dev/sys/dev/usb/controller/atmegadci.c
Hans Petter Selasky 2e14174893 Implement better support for USB controller suspend and resume. 
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00

2161 lines
48 KiB
C
Raw Blame History

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 2009 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This file contains the driver for the ATMEGA series USB OTG Controller. This
* driver currently only supports the DCI mode of the USB hardware.
*/
/*
* NOTE: When the chip detects BUS-reset it will also reset the
* endpoints, Function-address and more.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#define USB_DEBUG_VAR atmegadci_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_hub.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/atmegadci.h>
#define ATMEGA_BUS2SC(bus) \
((struct atmegadci_softc *)(((uint8_t *)(bus)) - \
((uint8_t *)&(((struct atmegadci_softc *)0)->sc_bus))))
#define ATMEGA_PC2SC(pc) \
ATMEGA_BUS2SC(USB_DMATAG_TO_XROOT((pc)->tag_parent)->bus)
#ifdef USB_DEBUG
static int atmegadci_debug = 0;
static SYSCTL_NODE(_hw_usb, OID_AUTO, atmegadci, CTLFLAG_RW, 0,
"USB ATMEGA DCI");
SYSCTL_INT(_hw_usb_atmegadci, OID_AUTO, debug, CTLFLAG_RW,
&atmegadci_debug, 0, "ATMEGA DCI debug level");
#endif
#define ATMEGA_INTR_ENDPT 1
/* prototypes */
struct usb_bus_methods atmegadci_bus_methods;
struct usb_pipe_methods atmegadci_device_non_isoc_methods;
struct usb_pipe_methods atmegadci_device_isoc_fs_methods;
static atmegadci_cmd_t atmegadci_setup_rx;
static atmegadci_cmd_t atmegadci_data_rx;
static atmegadci_cmd_t atmegadci_data_tx;
static atmegadci_cmd_t atmegadci_data_tx_sync;
static void atmegadci_device_done(struct usb_xfer *, usb_error_t);
static void atmegadci_do_poll(struct usb_bus *);
static void atmegadci_standard_done(struct usb_xfer *);
static void atmegadci_root_intr(struct atmegadci_softc *sc);
/*
* Here is a list of what the chip supports:
*/
static const struct usb_hw_ep_profile
atmegadci_ep_profile[2] = {
[0] = {
.max_in_frame_size = 64,
.max_out_frame_size = 64,
.is_simplex = 1,
.support_control = 1,
},
[1] = {
.max_in_frame_size = 64,
.max_out_frame_size = 64,
.is_simplex = 1,
.support_bulk = 1,
.support_interrupt = 1,
.support_isochronous = 1,
.support_in = 1,
.support_out = 1,
},
};
static void
atmegadci_get_hw_ep_profile(struct usb_device *udev,
const struct usb_hw_ep_profile **ppf, uint8_t ep_addr)
{
if (ep_addr == 0)
*ppf = atmegadci_ep_profile;
else if (ep_addr < ATMEGA_EP_MAX)
*ppf = atmegadci_ep_profile + 1;
else
*ppf = NULL;
}
static void
atmegadci_clocks_on(struct atmegadci_softc *sc)
{
if (sc->sc_flags.clocks_off &&
sc->sc_flags.port_powered) {
DPRINTFN(5, "\n");
/* turn on clocks */
(sc->sc_clocks_on) (&sc->sc_bus);
ATMEGA_WRITE_1(sc, ATMEGA_USBCON,
ATMEGA_USBCON_USBE |
ATMEGA_USBCON_OTGPADE |
ATMEGA_USBCON_VBUSTE);
sc->sc_flags.clocks_off = 0;
/* enable transceiver ? */
}
}
static void
atmegadci_clocks_off(struct atmegadci_softc *sc)
{
if (!sc->sc_flags.clocks_off) {
DPRINTFN(5, "\n");
/* disable Transceiver ? */
ATMEGA_WRITE_1(sc, ATMEGA_USBCON,
ATMEGA_USBCON_USBE |
ATMEGA_USBCON_OTGPADE |
ATMEGA_USBCON_FRZCLK |
ATMEGA_USBCON_VBUSTE);
/* turn clocks off */
(sc->sc_clocks_off) (&sc->sc_bus);
sc->sc_flags.clocks_off = 1;
}
}
static void
atmegadci_pull_up(struct atmegadci_softc *sc)
{
/* pullup D+, if possible */
if (!sc->sc_flags.d_pulled_up &&
sc->sc_flags.port_powered) {
sc->sc_flags.d_pulled_up = 1;
ATMEGA_WRITE_1(sc, ATMEGA_UDCON, 0);
}
}
static void
atmegadci_pull_down(struct atmegadci_softc *sc)
{
/* pulldown D+, if possible */
if (sc->sc_flags.d_pulled_up) {
sc->sc_flags.d_pulled_up = 0;
ATMEGA_WRITE_1(sc, ATMEGA_UDCON, ATMEGA_UDCON_DETACH);
}
}
static void
atmegadci_wakeup_peer(struct atmegadci_softc *sc)
{
uint8_t temp;
if (!sc->sc_flags.status_suspend) {
return;
}
temp = ATMEGA_READ_1(sc, ATMEGA_UDCON);
ATMEGA_WRITE_1(sc, ATMEGA_UDCON, temp | ATMEGA_UDCON_RMWKUP);
/* wait 8 milliseconds */
/* Wait for reset to complete. */
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
/* hardware should have cleared RMWKUP bit */
}
static void
atmegadci_set_address(struct atmegadci_softc *sc, uint8_t addr)
{
DPRINTFN(5, "addr=%d\n", addr);
addr |= ATMEGA_UDADDR_ADDEN;
ATMEGA_WRITE_1(sc, ATMEGA_UDADDR, addr);
}
static uint8_t
atmegadci_setup_rx(struct atmegadci_td *td)
{
struct atmegadci_softc *sc;
struct usb_device_request req;
uint16_t count;
uint8_t temp;
/* get pointer to softc */
sc = ATMEGA_PC2SC(td->pc);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, td->ep_no);
/* check endpoint status */
temp = ATMEGA_READ_1(sc, ATMEGA_UEINTX);
DPRINTFN(5, "UEINTX=0x%02x\n", temp);
if (!(temp & ATMEGA_UEINTX_RXSTPI)) {
goto not_complete;
}
/* clear did stall */
td->did_stall = 0;
/* get the packet byte count */
count =
(ATMEGA_READ_1(sc, ATMEGA_UEBCHX) << 8) |
(ATMEGA_READ_1(sc, ATMEGA_UEBCLX));
/* mask away undefined bits */
count &= 0x7FF;
/* verify data length */
if (count != td->remainder) {
DPRINTFN(0, "Invalid SETUP packet "
"length, %d bytes\n", count);
goto not_complete;
}
if (count != sizeof(req)) {
DPRINTFN(0, "Unsupported SETUP packet "
"length, %d bytes\n", count);
goto not_complete;
}
/* receive data */
ATMEGA_READ_MULTI_1(sc, ATMEGA_UEDATX,
(void *)&req, sizeof(req));
/* copy data into real buffer */
usbd_copy_in(td->pc, 0, &req, sizeof(req));
td->offset = sizeof(req);
td->remainder = 0;
/* sneak peek the set address */
if ((req.bmRequestType == UT_WRITE_DEVICE) &&
(req.bRequest == UR_SET_ADDRESS)) {
sc->sc_dv_addr = req.wValue[0] & 0x7F;
/* must write address before ZLP */
ATMEGA_WRITE_1(sc, ATMEGA_UDADDR, sc->sc_dv_addr);
} else {
sc->sc_dv_addr = 0xFF;
}
/* Clear SETUP packet interrupt and all other previous interrupts */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, 0);
return (0); /* complete */
not_complete:
/* abort any ongoing transfer */
if (!td->did_stall) {
DPRINTFN(5, "stalling\n");
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_STALLRQ);
td->did_stall = 1;
}
if (temp & ATMEGA_UEINTX_RXSTPI) {
/* clear SETUP packet interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, ~ATMEGA_UEINTX_RXSTPI);
}
/* we only want to know if there is a SETUP packet */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX, ATMEGA_UEIENX_RXSTPE);
return (1); /* not complete */
}
static uint8_t
atmegadci_data_rx(struct atmegadci_td *td)
{
struct atmegadci_softc *sc;
struct usb_page_search buf_res;
uint16_t count;
uint8_t temp;
uint8_t to;
uint8_t got_short;
to = 3; /* don't loop forever! */
got_short = 0;
/* get pointer to softc */
sc = ATMEGA_PC2SC(td->pc);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, td->ep_no);
repeat:
/* check if any of the FIFO banks have data */
/* check endpoint status */
temp = ATMEGA_READ_1(sc, ATMEGA_UEINTX);
DPRINTFN(5, "temp=0x%02x rem=%u\n", temp, td->remainder);
if (temp & ATMEGA_UEINTX_RXSTPI) {
if (td->remainder == 0) {
/*
* We are actually complete and have
* received the next SETUP
*/
DPRINTFN(5, "faking complete\n");
return (0); /* complete */
}
/*
* USB Host Aborted the transfer.
*/
td->error = 1;
return (0); /* complete */
}
/* check status */
if (!(temp & (ATMEGA_UEINTX_FIFOCON |
ATMEGA_UEINTX_RXOUTI))) {
/* no data */
goto not_complete;
}
/* get the packet byte count */
count =
(ATMEGA_READ_1(sc, ATMEGA_UEBCHX) << 8) |
(ATMEGA_READ_1(sc, ATMEGA_UEBCLX));
/* mask away undefined bits */
count &= 0x7FF;
/* verify the packet byte count */
if (count != td->max_packet_size) {
if (count < td->max_packet_size) {
/* we have a short packet */
td->short_pkt = 1;
got_short = 1;
} else {
/* invalid USB packet */
td->error = 1;
return (0); /* we are complete */
}
}
/* verify the packet byte count */
if (count > td->remainder) {
/* invalid USB packet */
td->error = 1;
return (0); /* we are complete */
}
while (count > 0) {
usbd_get_page(td->pc, td->offset, &buf_res);
/* get correct length */
if (buf_res.length > count) {
buf_res.length = count;
}
/* receive data */
ATMEGA_READ_MULTI_1(sc, ATMEGA_UEDATX,
buf_res.buffer, buf_res.length);
/* update counters */
count -= buf_res.length;
td->offset += buf_res.length;
td->remainder -= buf_res.length;
}
/* clear OUT packet interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, ATMEGA_UEINTX_RXOUTI ^ 0xFF);
/* release FIFO bank */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, ATMEGA_UEINTX_FIFOCON ^ 0xFF);
/* check if we are complete */
if ((td->remainder == 0) || got_short) {
if (td->short_pkt) {
/* we are complete */
return (0);
}
/* else need to receive a zero length packet */
}
if (--to) {
goto repeat;
}
not_complete:
/* we only want to know if there is a SETUP packet or OUT packet */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX,
ATMEGA_UEIENX_RXSTPE | ATMEGA_UEIENX_RXOUTE);
return (1); /* not complete */
}
static uint8_t
atmegadci_data_tx(struct atmegadci_td *td)
{
struct atmegadci_softc *sc;
struct usb_page_search buf_res;
uint16_t count;
uint8_t to;
uint8_t temp;
to = 3; /* don't loop forever! */
/* get pointer to softc */
sc = ATMEGA_PC2SC(td->pc);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, td->ep_no);
repeat:
/* check endpoint status */
temp = ATMEGA_READ_1(sc, ATMEGA_UEINTX);
DPRINTFN(5, "temp=0x%02x rem=%u\n", temp, td->remainder);
if (temp & ATMEGA_UEINTX_RXSTPI) {
/*
* The current transfer was aborted
* by the USB Host
*/
td->error = 1;
return (0); /* complete */
}
temp = ATMEGA_READ_1(sc, ATMEGA_UESTA0X);
if (temp & 3) {
/* cannot write any data - a bank is busy */
goto not_complete;
}
count = td->max_packet_size;
if (td->remainder < count) {
/* we have a short packet */
td->short_pkt = 1;
count = td->remainder;
}
while (count > 0) {
usbd_get_page(td->pc, td->offset, &buf_res);
/* get correct length */
if (buf_res.length > count) {
buf_res.length = count;
}
/* transmit data */
ATMEGA_WRITE_MULTI_1(sc, ATMEGA_UEDATX,
buf_res.buffer, buf_res.length);
/* update counters */
count -= buf_res.length;
td->offset += buf_res.length;
td->remainder -= buf_res.length;
}
/* clear IN packet interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, 0xFF ^ ATMEGA_UEINTX_TXINI);
/* allocate FIFO bank */
ATMEGA_WRITE_1(sc, ATMEGA_UEINTX, 0xFF ^ ATMEGA_UEINTX_FIFOCON);
/* check remainder */
if (td->remainder == 0) {
if (td->short_pkt) {
return (0); /* complete */
}
/* else we need to transmit a short packet */
}
if (--to) {
goto repeat;
}
not_complete:
/* we only want to know if there is a SETUP packet or free IN packet */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX,
ATMEGA_UEIENX_RXSTPE | ATMEGA_UEIENX_TXINE);
return (1); /* not complete */
}
static uint8_t
atmegadci_data_tx_sync(struct atmegadci_td *td)
{
struct atmegadci_softc *sc;
uint8_t temp;
/* get pointer to softc */
sc = ATMEGA_PC2SC(td->pc);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, td->ep_no);
/* check endpoint status */
temp = ATMEGA_READ_1(sc, ATMEGA_UEINTX);
DPRINTFN(5, "temp=0x%02x\n", temp);
if (temp & ATMEGA_UEINTX_RXSTPI) {
DPRINTFN(5, "faking complete\n");
/* Race condition */
return (0); /* complete */
}
/*
* The control endpoint has only got one bank, so if that bank
* is free the packet has been transferred!
*/
temp = ATMEGA_READ_1(sc, ATMEGA_UESTA0X);
if (temp & 3) {
/* cannot write any data - a bank is busy */
goto not_complete;
}
if (sc->sc_dv_addr != 0xFF) {
/* set new address */
atmegadci_set_address(sc, sc->sc_dv_addr);
}
return (0); /* complete */
not_complete:
/* we only want to know if there is a SETUP packet or free IN packet */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX,
ATMEGA_UEIENX_RXSTPE | ATMEGA_UEIENX_TXINE);
return (1); /* not complete */
}
static uint8_t
atmegadci_xfer_do_fifo(struct usb_xfer *xfer)
{
struct atmegadci_td *td;
DPRINTFN(9, "\n");
td = xfer->td_transfer_cache;
while (1) {
if ((td->func) (td)) {
/* operation in progress */
break;
}
if (((void *)td) == xfer->td_transfer_last) {
goto done;
}
if (td->error) {
goto done;
} else if (td->remainder > 0) {
/*
* We had a short transfer. If there is no alternate
* next, stop processing !
*/
if (!td->alt_next) {
goto done;
}
}
/*
* Fetch the next transfer descriptor and transfer
* some flags to the next transfer descriptor
*/
td = td->obj_next;
xfer->td_transfer_cache = td;
}
return (1); /* not complete */
done:
/* compute all actual lengths */
atmegadci_standard_done(xfer);
return (0); /* complete */
}
static void
atmegadci_interrupt_poll(struct atmegadci_softc *sc)
{
struct usb_xfer *xfer;
repeat:
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
if (!atmegadci_xfer_do_fifo(xfer)) {
/* queue has been modified */
goto repeat;
}
}
}
static void
atmegadci_vbus_interrupt(struct atmegadci_softc *sc, uint8_t is_on)
{
DPRINTFN(5, "vbus = %u\n", is_on);
if (is_on) {
if (!sc->sc_flags.status_vbus) {
sc->sc_flags.status_vbus = 1;
/* complete root HUB interrupt endpoint */
atmegadci_root_intr(sc);
}
} else {
if (sc->sc_flags.status_vbus) {
sc->sc_flags.status_vbus = 0;
sc->sc_flags.status_bus_reset = 0;
sc->sc_flags.status_suspend = 0;
sc->sc_flags.change_suspend = 0;
sc->sc_flags.change_connect = 1;
/* complete root HUB interrupt endpoint */
atmegadci_root_intr(sc);
}
}
}
void
atmegadci_interrupt(struct atmegadci_softc *sc)
{
uint8_t status;
USB_BUS_LOCK(&sc->sc_bus);
/* read interrupt status */
status = ATMEGA_READ_1(sc, ATMEGA_UDINT);
/* clear all set interrupts */
ATMEGA_WRITE_1(sc, ATMEGA_UDINT, (~status) & 0x7D);
DPRINTFN(14, "UDINT=0x%02x\n", status);
/* check for any bus state change interrupts */
if (status & ATMEGA_UDINT_EORSTI) {
DPRINTFN(5, "end of reset\n");
/* set correct state */
sc->sc_flags.status_bus_reset = 1;
sc->sc_flags.status_suspend = 0;
sc->sc_flags.change_suspend = 0;
sc->sc_flags.change_connect = 1;
/* disable resume interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UDIEN,
ATMEGA_UDINT_SUSPE |
ATMEGA_UDINT_EORSTE);
/* complete root HUB interrupt endpoint */
atmegadci_root_intr(sc);
}
/*
* If resume and suspend is set at the same time we interpret
* that like RESUME. Resume is set when there is at least 3
* milliseconds of inactivity on the USB BUS.
*/
if (status & ATMEGA_UDINT_WAKEUPI) {
DPRINTFN(5, "resume interrupt\n");
if (sc->sc_flags.status_suspend) {
/* update status bits */
sc->sc_flags.status_suspend = 0;
sc->sc_flags.change_suspend = 1;
/* disable resume interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UDIEN,
ATMEGA_UDINT_SUSPE |
ATMEGA_UDINT_EORSTE);
/* complete root HUB interrupt endpoint */
atmegadci_root_intr(sc);
}
} else if (status & ATMEGA_UDINT_SUSPI) {
DPRINTFN(5, "suspend interrupt\n");
if (!sc->sc_flags.status_suspend) {
/* update status bits */
sc->sc_flags.status_suspend = 1;
sc->sc_flags.change_suspend = 1;
/* disable suspend interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UDIEN,
ATMEGA_UDINT_WAKEUPE |
ATMEGA_UDINT_EORSTE);
/* complete root HUB interrupt endpoint */
atmegadci_root_intr(sc);
}
}
/* check VBUS */
status = ATMEGA_READ_1(sc, ATMEGA_USBINT);
/* clear all set interrupts */
ATMEGA_WRITE_1(sc, ATMEGA_USBINT, (~status) & 0x03);
if (status & ATMEGA_USBINT_VBUSTI) {
uint8_t temp;
DPRINTFN(5, "USBINT=0x%02x\n", status);
temp = ATMEGA_READ_1(sc, ATMEGA_USBSTA);
atmegadci_vbus_interrupt(sc, temp & ATMEGA_USBSTA_VBUS);
}
/* check for any endpoint interrupts */
status = ATMEGA_READ_1(sc, ATMEGA_UEINT);
/* the hardware will clear the UEINT bits automatically */
if (status) {
DPRINTFN(5, "real endpoint interrupt UEINT=0x%02x\n", status);
atmegadci_interrupt_poll(sc);
}
USB_BUS_UNLOCK(&sc->sc_bus);
}
static void
atmegadci_setup_standard_chain_sub(struct atmegadci_std_temp *temp)
{
struct atmegadci_td *td;
/* get current Transfer Descriptor */
td = temp->td_next;
temp->td = td;
/* prepare for next TD */
temp->td_next = td->obj_next;
/* fill out the Transfer Descriptor */
td->func = temp->func;
td->pc = temp->pc;
td->offset = temp->offset;
td->remainder = temp->len;
td->error = 0;
td->did_stall = temp->did_stall;
td->short_pkt = temp->short_pkt;
td->alt_next = temp->setup_alt_next;
}
static void
atmegadci_setup_standard_chain(struct usb_xfer *xfer)
{
struct atmegadci_std_temp temp;
struct atmegadci_softc *sc;
struct atmegadci_td *td;
uint32_t x;
uint8_t ep_no;
uint8_t need_sync;
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usbd_get_speed(xfer->xroot->udev));
temp.max_frame_size = xfer->max_frame_size;
td = xfer->td_start[0];
xfer->td_transfer_first = td;
xfer->td_transfer_cache = td;
/* setup temp */
temp.pc = NULL;
temp.td = NULL;
temp.td_next = xfer->td_start[0];
temp.offset = 0;
temp.setup_alt_next = xfer->flags_int.short_frames_ok;
temp.did_stall = !xfer->flags_int.control_stall;
sc = ATMEGA_BUS2SC(xfer->xroot->bus);
ep_no = (xfer->endpointno & UE_ADDR);
/* check if we should prepend a setup message */
if (xfer->flags_int.control_xfr) {
if (xfer->flags_int.control_hdr) {
temp.func = &atmegadci_setup_rx;
temp.len = xfer->frlengths[0];
temp.pc = xfer->frbuffers + 0;
temp.short_pkt = temp.len ? 1 : 0;
/* check for last frame */
if (xfer->nframes == 1) {
/* no STATUS stage yet, SETUP is last */
if (xfer->flags_int.control_act)
temp.setup_alt_next = 0;
}
atmegadci_setup_standard_chain_sub(&temp);
}
x = 1;
} else {
x = 0;
}
if (x != xfer->nframes) {
if (xfer->endpointno & UE_DIR_IN) {
temp.func = &atmegadci_data_tx;
need_sync = 1;
} else {
temp.func = &atmegadci_data_rx;
need_sync = 0;
}
/* setup "pc" pointer */
temp.pc = xfer->frbuffers + x;
} else {
need_sync = 0;
}
while (x != xfer->nframes) {
/* DATA0 / DATA1 message */
temp.len = xfer->frlengths[x];
x++;
if (x == xfer->nframes) {
if (xfer->flags_int.control_xfr) {
if (xfer->flags_int.control_act) {
temp.setup_alt_next = 0;
}
} else {
temp.setup_alt_next = 0;
}
}
if (temp.len == 0) {
/* make sure that we send an USB packet */
temp.short_pkt = 0;
} else {
/* regular data transfer */
temp.short_pkt = (xfer->flags.force_short_xfer) ? 0 : 1;
}
atmegadci_setup_standard_chain_sub(&temp);
if (xfer->flags_int.isochronous_xfr) {
temp.offset += temp.len;
} else {
/* get next Page Cache pointer */
temp.pc = xfer->frbuffers + x;
}
}
if (xfer->flags_int.control_xfr) {
/* always setup a valid "pc" pointer for status and sync */
temp.pc = xfer->frbuffers + 0;
temp.len = 0;
temp.short_pkt = 0;
temp.setup_alt_next = 0;
/* check if we need to sync */
if (need_sync) {
/* we need a SYNC point after TX */
temp.func = &atmegadci_data_tx_sync;
atmegadci_setup_standard_chain_sub(&temp);
}
/* check if we should append a status stage */
if (!xfer->flags_int.control_act) {
/*
* Send a DATA1 message and invert the current
* endpoint direction.
*/
if (xfer->endpointno & UE_DIR_IN) {
temp.func = &atmegadci_data_rx;
need_sync = 0;
} else {
temp.func = &atmegadci_data_tx;
need_sync = 1;
}
atmegadci_setup_standard_chain_sub(&temp);
if (need_sync) {
/* we need a SYNC point after TX */
temp.func = &atmegadci_data_tx_sync;
atmegadci_setup_standard_chain_sub(&temp);
}
}
}
/* must have at least one frame! */
td = temp.td;
xfer->td_transfer_last = td;
}
static void
atmegadci_timeout(void *arg)
{
struct usb_xfer *xfer = arg;
DPRINTF("xfer=%p\n", xfer);
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/* transfer is transferred */
atmegadci_device_done(xfer, USB_ERR_TIMEOUT);
}
static void
atmegadci_start_standard_chain(struct usb_xfer *xfer)
{
DPRINTFN(9, "\n");
/* poll one time - will turn on interrupts */
if (atmegadci_xfer_do_fifo(xfer)) {
/* put transfer on interrupt queue */
usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer);
/* start timeout, if any */
if (xfer->timeout != 0) {
usbd_transfer_timeout_ms(xfer,
&atmegadci_timeout, xfer->timeout);
}
}
}
static void
atmegadci_root_intr(struct atmegadci_softc *sc)
{
DPRINTFN(9, "\n");
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
/* set port bit */
sc->sc_hub_idata[0] = 0x02; /* we only have one port */
uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata,
sizeof(sc->sc_hub_idata));
}
static usb_error_t
atmegadci_standard_done_sub(struct usb_xfer *xfer)
{
struct atmegadci_td *td;
uint32_t len;
uint8_t error;
DPRINTFN(9, "\n");
td = xfer->td_transfer_cache;
do {
len = td->remainder;
if (xfer->aframes != xfer->nframes) {
/*
* Verify the length and subtract
* the remainder from "frlengths[]":
*/
if (len > xfer->frlengths[xfer->aframes]) {
td->error = 1;
} else {
xfer->frlengths[xfer->aframes] -= len;
}
}
/* Check for transfer error */
if (td->error) {
/* the transfer is finished */
error = 1;
td = NULL;
break;
}
/* Check for short transfer */
if (len > 0) {
if (xfer->flags_int.short_frames_ok) {
/* follow alt next */
if (td->alt_next) {
td = td->obj_next;
} else {
td = NULL;
}
} else {
/* the transfer is finished */
td = NULL;
}
error = 0;
break;
}
td = td->obj_next;
/* this USB frame is complete */
error = 0;
break;
} while (0);
/* update transfer cache */
xfer->td_transfer_cache = td;
return (error ?
USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION);
}
static void
atmegadci_standard_done(struct usb_xfer *xfer)
{
usb_error_t err = 0;
DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
xfer, xfer->endpoint);
/* reset scanner */
xfer->td_transfer_cache = xfer->td_transfer_first;
if (xfer->flags_int.control_xfr) {
if (xfer->flags_int.control_hdr) {
err = atmegadci_standard_done_sub(xfer);
}
xfer->aframes = 1;
if (xfer->td_transfer_cache == NULL) {
goto done;
}
}
while (xfer->aframes != xfer->nframes) {
err = atmegadci_standard_done_sub(xfer);
xfer->aframes++;
if (xfer->td_transfer_cache == NULL) {
goto done;
}
}
if (xfer->flags_int.control_xfr &&
!xfer->flags_int.control_act) {
err = atmegadci_standard_done_sub(xfer);
}
done:
atmegadci_device_done(xfer, err);
}
/*------------------------------------------------------------------------*
* atmegadci_device_done
*
* NOTE: this function can be called more than one time on the
* same USB transfer!
*------------------------------------------------------------------------*/
static void
atmegadci_device_done(struct usb_xfer *xfer, usb_error_t error)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(xfer->xroot->bus);
uint8_t ep_no;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
DPRINTFN(9, "xfer=%p, endpoint=%p, error=%d\n",
xfer, xfer->endpoint, error);
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
ep_no = (xfer->endpointno & UE_ADDR);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, ep_no);
/* disable endpoint interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX, 0);
DPRINTFN(15, "disabled interrupts!\n");
}
/* dequeue transfer and start next transfer */
usbd_transfer_done(xfer, error);
}
static void
atmegadci_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
struct usb_endpoint *ep, uint8_t *did_stall)
{
struct atmegadci_softc *sc;
uint8_t ep_no;
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
DPRINTFN(5, "endpoint=%p\n", ep);
if (xfer) {
/* cancel any ongoing transfers */
atmegadci_device_done(xfer, USB_ERR_STALLED);
}
sc = ATMEGA_BUS2SC(udev->bus);
/* get endpoint number */
ep_no = (ep->edesc->bEndpointAddress & UE_ADDR);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, ep_no);
/* set stall */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_STALLRQ);
}
static void
atmegadci_clear_stall_sub(struct atmegadci_softc *sc, uint8_t ep_no,
uint8_t ep_type, uint8_t ep_dir)
{
uint8_t temp;
if (ep_type == UE_CONTROL) {
/* clearing stall is not needed */
return;
}
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, ep_no);
/* set endpoint reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, ATMEGA_UERST_MASK(ep_no));
/* clear endpoint reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, 0);
/* set stall */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_STALLRQ);
/* reset data toggle */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_RSTDT);
/* clear stall */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_STALLRQC);
do {
if (ep_type == UE_BULK) {
temp = ATMEGA_UECFG0X_EPTYPE2;
} else if (ep_type == UE_INTERRUPT) {
temp = ATMEGA_UECFG0X_EPTYPE3;
} else {
temp = ATMEGA_UECFG0X_EPTYPE1;
}
if (ep_dir & UE_DIR_IN) {
temp |= ATMEGA_UECFG0X_EPDIR;
}
/* two banks, 64-bytes wMaxPacket */
ATMEGA_WRITE_1(sc, ATMEGA_UECFG0X, temp);
ATMEGA_WRITE_1(sc, ATMEGA_UECFG1X,
ATMEGA_UECFG1X_ALLOC |
ATMEGA_UECFG1X_EPBK0 | /* one bank */
ATMEGA_UECFG1X_EPSIZE(3));
temp = ATMEGA_READ_1(sc, ATMEGA_UESTA0X);
if (!(temp & ATMEGA_UESTA0X_CFGOK)) {
device_printf(sc->sc_bus.bdev,
"Chip rejected configuration\n");
}
} while (0);
}
static void
atmegadci_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
{
struct atmegadci_softc *sc;
struct usb_endpoint_descriptor *ed;
DPRINTFN(5, "endpoint=%p\n", ep);
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
/* check mode */
if (udev->flags.usb_mode != USB_MODE_DEVICE) {
/* not supported */
return;
}
/* get softc */
sc = ATMEGA_BUS2SC(udev->bus);
/* get endpoint descriptor */
ed = ep->edesc;
/* reset endpoint */
atmegadci_clear_stall_sub(sc,
(ed->bEndpointAddress & UE_ADDR),
(ed->bmAttributes & UE_XFERTYPE),
(ed->bEndpointAddress & (UE_DIR_IN | UE_DIR_OUT)));
}
usb_error_t
atmegadci_init(struct atmegadci_softc *sc)
{
uint8_t n;
DPRINTF("start\n");
/* set up the bus structure */
sc->sc_bus.usbrev = USB_REV_1_1;
sc->sc_bus.methods = &atmegadci_bus_methods;
USB_BUS_LOCK(&sc->sc_bus);
/* make sure USB is enabled */
ATMEGA_WRITE_1(sc, ATMEGA_USBCON,
ATMEGA_USBCON_USBE |
ATMEGA_USBCON_FRZCLK);
/* enable USB PAD regulator */
ATMEGA_WRITE_1(sc, ATMEGA_UHWCON,
ATMEGA_UHWCON_UVREGE |
ATMEGA_UHWCON_UIMOD);
/* the following register sets up the USB PLL, assuming 16MHz X-tal */
ATMEGA_WRITE_1(sc, 0x49 /* PLLCSR */, 0x14 | 0x02);
/* wait for PLL to lock */
for (n = 0; n != 20; n++) {
if (ATMEGA_READ_1(sc, 0x49) & 0x01)
break;
/* wait a little bit for PLL to start */
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
}
/* make sure USB is enabled */
ATMEGA_WRITE_1(sc, ATMEGA_USBCON,
ATMEGA_USBCON_USBE |
ATMEGA_USBCON_OTGPADE |
ATMEGA_USBCON_VBUSTE);
/* turn on clocks */
(sc->sc_clocks_on) (&sc->sc_bus);
/* make sure device is re-enumerated */
ATMEGA_WRITE_1(sc, ATMEGA_UDCON, ATMEGA_UDCON_DETACH);
/* wait a little for things to stabilise */
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 20);
/* enable interrupts */
ATMEGA_WRITE_1(sc, ATMEGA_UDIEN,
ATMEGA_UDINT_SUSPE |
ATMEGA_UDINT_EORSTE);
/* reset all endpoints */
ATMEGA_WRITE_1(sc, ATMEGA_UERST,
(1 << ATMEGA_EP_MAX) - 1);
/* disable reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, 0);
/* disable all endpoints */
for (n = 0; n != ATMEGA_EP_MAX; n++) {
/* select endpoint */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, n);
/* disable endpoint interrupt */
ATMEGA_WRITE_1(sc, ATMEGA_UEIENX, 0);
/* disable endpoint */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX, 0);
}
/* turn off clocks */
atmegadci_clocks_off(sc);
/* read initial VBUS state */
n = ATMEGA_READ_1(sc, ATMEGA_USBSTA);
atmegadci_vbus_interrupt(sc, n & ATMEGA_USBSTA_VBUS);
USB_BUS_UNLOCK(&sc->sc_bus);
/* catch any lost interrupts */
atmegadci_do_poll(&sc->sc_bus);
return (0); /* success */
}
void
atmegadci_uninit(struct atmegadci_softc *sc)
{
USB_BUS_LOCK(&sc->sc_bus);
/* turn on clocks */
(sc->sc_clocks_on) (&sc->sc_bus);
/* disable interrupts */
ATMEGA_WRITE_1(sc, ATMEGA_UDIEN, 0);
/* reset all endpoints */
ATMEGA_WRITE_1(sc, ATMEGA_UERST,
(1 << ATMEGA_EP_MAX) - 1);
/* disable reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, 0);
sc->sc_flags.port_powered = 0;
sc->sc_flags.status_vbus = 0;
sc->sc_flags.status_bus_reset = 0;
sc->sc_flags.status_suspend = 0;
sc->sc_flags.change_suspend = 0;
sc->sc_flags.change_connect = 1;
atmegadci_pull_down(sc);
atmegadci_clocks_off(sc);
/* disable USB PAD regulator */
ATMEGA_WRITE_1(sc, ATMEGA_UHWCON, 0);
USB_BUS_UNLOCK(&sc->sc_bus);
}
static void
atmegadci_suspend(struct atmegadci_softc *sc)
{
/* TODO */
}
static void
atmegadci_resume(struct atmegadci_softc *sc)
{
/* TODO */
}
static void
atmegadci_do_poll(struct usb_bus *bus)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(bus);
USB_BUS_LOCK(&sc->sc_bus);
atmegadci_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
}
/*------------------------------------------------------------------------*
* at91dci bulk support
* at91dci control support
* at91dci interrupt support
*------------------------------------------------------------------------*/
static void
atmegadci_device_non_isoc_open(struct usb_xfer *xfer)
{
return;
}
static void
atmegadci_device_non_isoc_close(struct usb_xfer *xfer)
{
atmegadci_device_done(xfer, USB_ERR_CANCELLED);
}
static void
atmegadci_device_non_isoc_enter(struct usb_xfer *xfer)
{
return;
}
static void
atmegadci_device_non_isoc_start(struct usb_xfer *xfer)
{
/* setup TDs */
atmegadci_setup_standard_chain(xfer);
atmegadci_start_standard_chain(xfer);
}
struct usb_pipe_methods atmegadci_device_non_isoc_methods =
{
.open = atmegadci_device_non_isoc_open,
.close = atmegadci_device_non_isoc_close,
.enter = atmegadci_device_non_isoc_enter,
.start = atmegadci_device_non_isoc_start,
};
/*------------------------------------------------------------------------*
* at91dci full speed isochronous support
*------------------------------------------------------------------------*/
static void
atmegadci_device_isoc_fs_open(struct usb_xfer *xfer)
{
return;
}
static void
atmegadci_device_isoc_fs_close(struct usb_xfer *xfer)
{
atmegadci_device_done(xfer, USB_ERR_CANCELLED);
}
static void
atmegadci_device_isoc_fs_enter(struct usb_xfer *xfer)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(xfer->xroot->bus);
uint32_t temp;
uint32_t nframes;
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
nframes =
(ATMEGA_READ_1(sc, ATMEGA_UDFNUMH) << 8) |
(ATMEGA_READ_1(sc, ATMEGA_UDFNUML));
nframes &= ATMEGA_FRAME_MASK;
/*
* check if the frame index is within the window where the frames
* will be inserted
*/
temp = (nframes - xfer->endpoint->isoc_next) & ATMEGA_FRAME_MASK;
if ((xfer->endpoint->is_synced == 0) ||
(temp < xfer->nframes)) {
/*
* If there is data underflow or the pipe queue is
* empty we schedule the transfer a few frames ahead
* of the current frame position. Else two isochronous
* transfers might overlap.
*/
xfer->endpoint->isoc_next = (nframes + 3) & ATMEGA_FRAME_MASK;
xfer->endpoint->is_synced = 1;
DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
temp = (xfer->endpoint->isoc_next - nframes) & ATMEGA_FRAME_MASK;
/*
* pre-compute when the isochronous transfer will be finished:
*/
xfer->isoc_time_complete =
usb_isoc_time_expand(&sc->sc_bus, nframes) + temp +
xfer->nframes;
/* compute frame number for next insertion */
xfer->endpoint->isoc_next += xfer->nframes;
/* setup TDs */
atmegadci_setup_standard_chain(xfer);
}
static void
atmegadci_device_isoc_fs_start(struct usb_xfer *xfer)
{
/* start TD chain */
atmegadci_start_standard_chain(xfer);
}
struct usb_pipe_methods atmegadci_device_isoc_fs_methods =
{
.open = atmegadci_device_isoc_fs_open,
.close = atmegadci_device_isoc_fs_close,
.enter = atmegadci_device_isoc_fs_enter,
.start = atmegadci_device_isoc_fs_start,
};
/*------------------------------------------------------------------------*
* at91dci root control support
*------------------------------------------------------------------------*
* Simulate a hardware HUB by handling all the necessary requests.
*------------------------------------------------------------------------*/
static const struct usb_device_descriptor atmegadci_devd = {
.bLength = sizeof(struct usb_device_descriptor),
.bDescriptorType = UDESC_DEVICE,
.bcdUSB = {0x00, 0x02},
.bDeviceClass = UDCLASS_HUB,
.bDeviceSubClass = UDSUBCLASS_HUB,
.bDeviceProtocol = UDPROTO_FSHUB,
.bMaxPacketSize = 64,
.bcdDevice = {0x00, 0x01},
.iManufacturer = 1,
.iProduct = 2,
.bNumConfigurations = 1,
};
static const struct atmegadci_config_desc atmegadci_confd = {
.confd = {
.bLength = sizeof(struct usb_config_descriptor),
.bDescriptorType = UDESC_CONFIG,
.wTotalLength[0] = sizeof(atmegadci_confd),
.bNumInterface = 1,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = UC_SELF_POWERED,
.bMaxPower = 0,
},
.ifcd = {
.bLength = sizeof(struct usb_interface_descriptor),
.bDescriptorType = UDESC_INTERFACE,
.bNumEndpoints = 1,
.bInterfaceClass = UICLASS_HUB,
.bInterfaceSubClass = UISUBCLASS_HUB,
.bInterfaceProtocol = 0,
},
.endpd = {
.bLength = sizeof(struct usb_endpoint_descriptor),
.bDescriptorType = UDESC_ENDPOINT,
.bEndpointAddress = (UE_DIR_IN | ATMEGA_INTR_ENDPT),
.bmAttributes = UE_INTERRUPT,
.wMaxPacketSize[0] = 8,
.bInterval = 255,
},
};
static const struct usb_hub_descriptor_min atmegadci_hubd = {
.bDescLength = sizeof(atmegadci_hubd),
.bDescriptorType = UDESC_HUB,
.bNbrPorts = 1,
.wHubCharacteristics[0] =
(UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL) & 0xFF,
.wHubCharacteristics[1] =
(UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL) >> 8,
.bPwrOn2PwrGood = 50,
.bHubContrCurrent = 0,
.DeviceRemovable = {0}, /* port is removable */
};
#define STRING_LANG \
0x09, 0x04, /* American English */
#define STRING_VENDOR \
'A', 0, 'T', 0, 'M', 0, 'E', 0, 'G', 0, 'A', 0
#define STRING_PRODUCT \
'D', 0, 'C', 0, 'I', 0, ' ', 0, 'R', 0, \
'o', 0, 'o', 0, 't', 0, ' ', 0, 'H', 0, \
'U', 0, 'B', 0,
USB_MAKE_STRING_DESC(STRING_LANG, atmegadci_langtab);
USB_MAKE_STRING_DESC(STRING_VENDOR, atmegadci_vendor);
USB_MAKE_STRING_DESC(STRING_PRODUCT, atmegadci_product);
static usb_error_t
atmegadci_roothub_exec(struct usb_device *udev,
struct usb_device_request *req, const void **pptr, uint16_t *plength)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(udev->bus);
const void *ptr;
uint16_t len;
uint16_t value;
uint16_t index;
uint8_t temp;
usb_error_t err;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
/* buffer reset */
ptr = (const void *)&sc->sc_hub_temp;
len = 0;
err = 0;
value = UGETW(req->wValue);
index = UGETW(req->wIndex);
/* demultiplex the control request */
switch (req->bmRequestType) {
case UT_READ_DEVICE:
switch (req->bRequest) {
case UR_GET_DESCRIPTOR:
goto tr_handle_get_descriptor;
case UR_GET_CONFIG:
goto tr_handle_get_config;
case UR_GET_STATUS:
goto tr_handle_get_status;
default:
goto tr_stalled;
}
break;
case UT_WRITE_DEVICE:
switch (req->bRequest) {
case UR_SET_ADDRESS:
goto tr_handle_set_address;
case UR_SET_CONFIG:
goto tr_handle_set_config;
case UR_CLEAR_FEATURE:
goto tr_valid; /* nop */
case UR_SET_DESCRIPTOR:
goto tr_valid; /* nop */
case UR_SET_FEATURE:
default:
goto tr_stalled;
}
break;
case UT_WRITE_ENDPOINT:
switch (req->bRequest) {
case UR_CLEAR_FEATURE:
switch (UGETW(req->wValue)) {
case UF_ENDPOINT_HALT:
goto tr_handle_clear_halt;
case UF_DEVICE_REMOTE_WAKEUP:
goto tr_handle_clear_wakeup;
default:
goto tr_stalled;
}
break;
case UR_SET_FEATURE:
switch (UGETW(req->wValue)) {
case UF_ENDPOINT_HALT:
goto tr_handle_set_halt;
case UF_DEVICE_REMOTE_WAKEUP:
goto tr_handle_set_wakeup;
default:
goto tr_stalled;
}
break;
case UR_SYNCH_FRAME:
goto tr_valid; /* nop */
default:
goto tr_stalled;
}
break;
case UT_READ_ENDPOINT:
switch (req->bRequest) {
case UR_GET_STATUS:
goto tr_handle_get_ep_status;
default:
goto tr_stalled;
}
break;
case UT_WRITE_INTERFACE:
switch (req->bRequest) {
case UR_SET_INTERFACE:
goto tr_handle_set_interface;
case UR_CLEAR_FEATURE:
goto tr_valid; /* nop */
case UR_SET_FEATURE:
default:
goto tr_stalled;
}
break;
case UT_READ_INTERFACE:
switch (req->bRequest) {
case UR_GET_INTERFACE:
goto tr_handle_get_interface;
case UR_GET_STATUS:
goto tr_handle_get_iface_status;
default:
goto tr_stalled;
}
break;
case UT_WRITE_CLASS_INTERFACE:
case UT_WRITE_VENDOR_INTERFACE:
/* XXX forward */
break;
case UT_READ_CLASS_INTERFACE:
case UT_READ_VENDOR_INTERFACE:
/* XXX forward */
break;
case UT_WRITE_CLASS_DEVICE:
switch (req->bRequest) {
case UR_CLEAR_FEATURE:
goto tr_valid;
case UR_SET_DESCRIPTOR:
case UR_SET_FEATURE:
break;
default:
goto tr_stalled;
}
break;
case UT_WRITE_CLASS_OTHER:
switch (req->bRequest) {
case UR_CLEAR_FEATURE:
goto tr_handle_clear_port_feature;
case UR_SET_FEATURE:
goto tr_handle_set_port_feature;
case UR_CLEAR_TT_BUFFER:
case UR_RESET_TT:
case UR_STOP_TT:
goto tr_valid;
default:
goto tr_stalled;
}
break;
case UT_READ_CLASS_OTHER:
switch (req->bRequest) {
case UR_GET_TT_STATE:
goto tr_handle_get_tt_state;
case UR_GET_STATUS:
goto tr_handle_get_port_status;
default:
goto tr_stalled;
}
break;
case UT_READ_CLASS_DEVICE:
switch (req->bRequest) {
case UR_GET_DESCRIPTOR:
goto tr_handle_get_class_descriptor;
case UR_GET_STATUS:
goto tr_handle_get_class_status;
default:
goto tr_stalled;
}
break;
default:
goto tr_stalled;
}
goto tr_valid;
tr_handle_get_descriptor:
switch (value >> 8) {
case UDESC_DEVICE:
if (value & 0xff) {
goto tr_stalled;
}
len = sizeof(atmegadci_devd);
ptr = (const void *)&atmegadci_devd;
goto tr_valid;
case UDESC_CONFIG:
if (value & 0xff) {
goto tr_stalled;
}
len = sizeof(atmegadci_confd);
ptr = (const void *)&atmegadci_confd;
goto tr_valid;
case UDESC_STRING:
switch (value & 0xff) {
case 0: /* Language table */
len = sizeof(atmegadci_langtab);
ptr = (const void *)&atmegadci_langtab;
goto tr_valid;
case 1: /* Vendor */
len = sizeof(atmegadci_vendor);
ptr = (const void *)&atmegadci_vendor;
goto tr_valid;
case 2: /* Product */
len = sizeof(atmegadci_product);
ptr = (const void *)&atmegadci_product;
goto tr_valid;
default:
break;
}
break;
default:
goto tr_stalled;
}
goto tr_stalled;
tr_handle_get_config:
len = 1;
sc->sc_hub_temp.wValue[0] = sc->sc_conf;
goto tr_valid;
tr_handle_get_status:
len = 2;
USETW(sc->sc_hub_temp.wValue, UDS_SELF_POWERED);
goto tr_valid;
tr_handle_set_address:
if (value & 0xFF00) {
goto tr_stalled;
}
sc->sc_rt_addr = value;
goto tr_valid;
tr_handle_set_config:
if (value >= 2) {
goto tr_stalled;
}
sc->sc_conf = value;
goto tr_valid;
tr_handle_get_interface:
len = 1;
sc->sc_hub_temp.wValue[0] = 0;
goto tr_valid;
tr_handle_get_tt_state:
tr_handle_get_class_status:
tr_handle_get_iface_status:
tr_handle_get_ep_status:
len = 2;
USETW(sc->sc_hub_temp.wValue, 0);
goto tr_valid;
tr_handle_set_halt:
tr_handle_set_interface:
tr_handle_set_wakeup:
tr_handle_clear_wakeup:
tr_handle_clear_halt:
goto tr_valid;
tr_handle_clear_port_feature:
if (index != 1) {
goto tr_stalled;
}
DPRINTFN(9, "UR_CLEAR_PORT_FEATURE on port %d\n", index);
switch (value) {
case UHF_PORT_SUSPEND:
atmegadci_wakeup_peer(sc);
break;
case UHF_PORT_ENABLE:
sc->sc_flags.port_enabled = 0;
break;
case UHF_PORT_TEST:
case UHF_PORT_INDICATOR:
case UHF_C_PORT_ENABLE:
case UHF_C_PORT_OVER_CURRENT:
case UHF_C_PORT_RESET:
/* nops */
break;
case UHF_PORT_POWER:
sc->sc_flags.port_powered = 0;
atmegadci_pull_down(sc);
atmegadci_clocks_off(sc);
break;
case UHF_C_PORT_CONNECTION:
/* clear connect change flag */
sc->sc_flags.change_connect = 0;
if (!sc->sc_flags.status_bus_reset) {
/* we are not connected */
break;
}
/* configure the control endpoint */
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, 0);
/* set endpoint reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, ATMEGA_UERST_MASK(0));
/* clear endpoint reset */
ATMEGA_WRITE_1(sc, ATMEGA_UERST, 0);
/* enable and stall endpoint */
ATMEGA_WRITE_1(sc, ATMEGA_UECONX,
ATMEGA_UECONX_EPEN |
ATMEGA_UECONX_STALLRQ);
/* one bank, 64-bytes wMaxPacket */
ATMEGA_WRITE_1(sc, ATMEGA_UECFG0X,
ATMEGA_UECFG0X_EPTYPE0);
ATMEGA_WRITE_1(sc, ATMEGA_UECFG1X,
ATMEGA_UECFG1X_ALLOC |
ATMEGA_UECFG1X_EPBK0 |
ATMEGA_UECFG1X_EPSIZE(3));
/* check valid config */
temp = ATMEGA_READ_1(sc, ATMEGA_UESTA0X);
if (!(temp & ATMEGA_UESTA0X_CFGOK)) {
device_printf(sc->sc_bus.bdev,
"Chip rejected EP0 configuration\n");
}
break;
case UHF_C_PORT_SUSPEND:
sc->sc_flags.change_suspend = 0;
break;
default:
err = USB_ERR_IOERROR;
goto done;
}
goto tr_valid;
tr_handle_set_port_feature:
if (index != 1) {
goto tr_stalled;
}
DPRINTFN(9, "UR_SET_PORT_FEATURE\n");
switch (value) {
case UHF_PORT_ENABLE:
sc->sc_flags.port_enabled = 1;
break;
case UHF_PORT_SUSPEND:
case UHF_PORT_RESET:
case UHF_PORT_TEST:
case UHF_PORT_INDICATOR:
/* nops */
break;
case UHF_PORT_POWER:
sc->sc_flags.port_powered = 1;
break;
default:
err = USB_ERR_IOERROR;
goto done;
}
goto tr_valid;
tr_handle_get_port_status:
DPRINTFN(9, "UR_GET_PORT_STATUS\n");
if (index != 1) {
goto tr_stalled;
}
if (sc->sc_flags.status_vbus) {
atmegadci_clocks_on(sc);
atmegadci_pull_up(sc);
} else {
atmegadci_pull_down(sc);
atmegadci_clocks_off(sc);
}
/* Select FULL-speed and Device Side Mode */
value = UPS_PORT_MODE_DEVICE;
if (sc->sc_flags.port_powered) {
value |= UPS_PORT_POWER;
}
if (sc->sc_flags.port_enabled) {
value |= UPS_PORT_ENABLED;
}
if (sc->sc_flags.status_vbus &&
sc->sc_flags.status_bus_reset) {
value |= UPS_CURRENT_CONNECT_STATUS;
}
if (sc->sc_flags.status_suspend) {
value |= UPS_SUSPEND;
}
USETW(sc->sc_hub_temp.ps.wPortStatus, value);
value = 0;
if (sc->sc_flags.change_connect) {
value |= UPS_C_CONNECT_STATUS;
}
if (sc->sc_flags.change_suspend) {
value |= UPS_C_SUSPEND;
}
USETW(sc->sc_hub_temp.ps.wPortChange, value);
len = sizeof(sc->sc_hub_temp.ps);
goto tr_valid;
tr_handle_get_class_descriptor:
if (value & 0xFF) {
goto tr_stalled;
}
ptr = (const void *)&atmegadci_hubd;
len = sizeof(atmegadci_hubd);
goto tr_valid;
tr_stalled:
err = USB_ERR_STALLED;
tr_valid:
done:
*plength = len;
*pptr = ptr;
return (err);
}
static void
atmegadci_xfer_setup(struct usb_setup_params *parm)
{
const struct usb_hw_ep_profile *pf;
struct atmegadci_softc *sc;
struct usb_xfer *xfer;
void *last_obj;
uint32_t ntd;
uint32_t n;
uint8_t ep_no;
sc = ATMEGA_BUS2SC(parm->udev->bus);
xfer = parm->curr_xfer;
/*
* NOTE: This driver does not use any of the parameters that
* are computed from the following values. Just set some
* reasonable dummies:
*/
parm->hc_max_packet_size = 0x500;
parm->hc_max_packet_count = 1;
parm->hc_max_frame_size = 0x500;
usbd_transfer_setup_sub(parm);
/*
* compute maximum number of TDs
*/
if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */
+ 1 /* SYNC 2 */ ;
} else {
ntd = xfer->nframes + 1 /* SYNC */ ;
}
/*
* check if "usbd_transfer_setup_sub" set an error
*/
if (parm->err)
return;
/*
* allocate transfer descriptors
*/
last_obj = NULL;
/*
* get profile stuff
*/
ep_no = xfer->endpointno & UE_ADDR;
atmegadci_get_hw_ep_profile(parm->udev, &pf, ep_no);
if (pf == NULL) {
/* should not happen */
parm->err = USB_ERR_INVAL;
return;
}
/* align data */
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
for (n = 0; n != ntd; n++) {
struct atmegadci_td *td;
if (parm->buf) {
td = USB_ADD_BYTES(parm->buf, parm->size[0]);
/* init TD */
td->max_packet_size = xfer->max_packet_size;
td->ep_no = ep_no;
if (pf->support_multi_buffer) {
td->support_multi_buffer = 1;
}
td->obj_next = last_obj;
last_obj = td;
}
parm->size[0] += sizeof(*td);
}
xfer->td_start[0] = last_obj;
}
static void
atmegadci_xfer_unsetup(struct usb_xfer *xfer)
{
return;
}
static void
atmegadci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
struct usb_endpoint *ep)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(udev->bus);
DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
ep, udev->address,
edesc->bEndpointAddress, udev->flags.usb_mode,
sc->sc_rt_addr, udev->device_index);
if (udev->device_index != sc->sc_rt_addr) {
if (udev->flags.usb_mode != USB_MODE_DEVICE) {
/* not supported */
return;
}
if (udev->speed != USB_SPEED_FULL) {
/* not supported */
return;
}
if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS)
ep->methods = &atmegadci_device_isoc_fs_methods;
else
ep->methods = &atmegadci_device_non_isoc_methods;
}
}
static void
atmegadci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(bus);
switch (state) {
case USB_HW_POWER_SUSPEND:
atmegadci_suspend(sc);
break;
case USB_HW_POWER_SHUTDOWN:
atmegadci_uninit(sc);
break;
case USB_HW_POWER_RESUME:
atmegadci_resume(sc);
break;
default:
break;
}
}
struct usb_bus_methods atmegadci_bus_methods =
{
.endpoint_init = &atmegadci_ep_init,
.xfer_setup = &atmegadci_xfer_setup,
.xfer_unsetup = &atmegadci_xfer_unsetup,
.get_hw_ep_profile = &atmegadci_get_hw_ep_profile,
.set_stall = &atmegadci_set_stall,
.clear_stall = &atmegadci_clear_stall,
.roothub_exec = &atmegadci_roothub_exec,
.xfer_poll = &atmegadci_do_poll,
.set_hw_power_sleep = &atmegadci_set_hw_power_sleep,
};
Reference in New Issue View Git Blame Copy Permalink