freebsd-dev/sys/dev/ipmi/ipmi_ssif.c
Julian Elischer 3745c395ec Rename the kthread_xxx (e.g. kthread_create()) calls
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.

I'd LOVE to do this rename in 7.0  so that we can eventually MFC the
new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00

376 lines
9.4 KiB
C

/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/condvar.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/module.h>
#include <sys/selinfo.h>
#include <dev/smbus/smbconf.h>
#include <dev/smbus/smb.h>
#include "smbus_if.h"
#ifdef LOCAL_MODULE
#include <ipmivars.h>
#else
#include <dev/ipmi/ipmivars.h>
#endif
#define SMBUS_WRITE_SINGLE 0x02
#define SMBUS_WRITE_START 0x06
#define SMBUS_WRITE_CONT 0x07
#define SMBUS_READ_START 0x03
#define SMBUS_READ_CONT 0x09
#define SMBUS_DATA_SIZE 32
#ifdef SSIF_DEBUG
static void
dump_buffer(device_t dev, const char *msg, u_char *bytes, int len)
{
int i;
device_printf(dev, "%s:", msg);
for (i = 0; i < len; i++)
printf(" %02x", bytes[i]);
printf("\n");
}
#endif
static int
ssif_polled_request(struct ipmi_softc *sc, struct ipmi_request *req)
{
u_char ssif_buf[SMBUS_DATA_SIZE];
device_t dev = sc->ipmi_dev;
device_t smbus = sc->ipmi_ssif_smbus;
u_char *cp, block, count, offset;
size_t len;
int error;
/* Acquire the bus while we send the request. */
if (smbus_request_bus(smbus, dev, SMB_WAIT) != 0)
return (0);
/*
* First, send out the request. Begin by filling out the first
* packet which includes the NetFn/LUN and command.
*/
ssif_buf[0] = req->ir_addr;
ssif_buf[1] = req->ir_command;
if (req->ir_requestlen > 0)
bcopy(req->ir_request, &ssif_buf[2],
min(req->ir_requestlen, SMBUS_DATA_SIZE - 2));
/* Small requests are sent with a single command. */
if (req->ir_requestlen <= 30) {
#ifdef SSIF_DEBUG
dump_buffer(dev, "WRITE_SINGLE", ssif_buf,
req->ir_requestlen + 2);
#endif
error = smbus_error(smbus_bwrite(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_WRITE_SINGLE,
req->ir_requestlen + 2, ssif_buf));
if (error) {
#ifdef SSIF_ERROR_DEBUG
device_printf(dev, "SSIF: WRITE_SINGLE error %d\n",
error);
#endif
goto fail;
}
} else {
/* Longer requests are sent out in 32-byte messages. */
#ifdef SSIF_DEBUG
dump_buffer(dev, "WRITE_START", ssif_buf, SMBUS_DATA_SIZE);
#endif
error = smbus_error(smbus_bwrite(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_WRITE_START,
SMBUS_DATA_SIZE, ssif_buf));
if (error) {
#ifdef SSIF_ERROR_DEBUG
device_printf(dev, "SSIF: WRITE_START error %d\n",
error);
#endif
goto fail;
}
len = req->ir_requestlen - (SMBUS_DATA_SIZE - 2);
cp = req->ir_request + (SMBUS_DATA_SIZE - 2);
while (len > 0) {
#ifdef SSIF_DEBUG
dump_buffer(dev, "WRITE_CONT", cp,
min(len, SMBUS_DATA_SIZE));
#endif
error = smbus_error(smbus_bwrite(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_WRITE_CONT,
min(len, SMBUS_DATA_SIZE), cp));
if (error) {
#ifdef SSIF_ERROR_DEBUG
device_printf(dev, "SSIF: WRITE_CONT error %d\n",
error);
#endif
goto fail;
}
cp += SMBUS_DATA_SIZE;
len -= SMBUS_DATA_SIZE;
}
/*
* The final WRITE_CONT transaction has to have a non-zero
* length that is also not SMBUS_DATA_SIZE. If our last
* WRITE_CONT transaction in the loop sent SMBUS_DATA_SIZE
* bytes, then len will be 0, and we send an extra 0x00 byte
* to terminate the transaction.
*/
if (len == 0) {
char c = 0;
#ifdef SSIF_DEBUG
dump_buffer(dev, "WRITE_CONT", &c, 1);
#endif
error = smbus_error(smbus_bwrite(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_WRITE_CONT,
1, &c));
if (error) {
#ifdef SSIF_ERROR_DEBUG
device_printf(dev, "SSIF: WRITE_CONT error %d\n",
error);
#endif
goto fail;
}
}
}
/* Release the bus. */
smbus_release_bus(smbus, dev);
/* Give the BMC 100ms to chew on the request. */
pause("ssifwt", hz / 10);
/* Try to read the first packet. */
read_start:
if (smbus_request_bus(smbus, dev, SMB_WAIT) != 0)
return (0);
count = SMBUS_DATA_SIZE;
error = smbus_error(smbus_bread(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_READ_START, &count, ssif_buf));
if (error == ENXIO || error == EBUSY) {
smbus_release_bus(smbus, dev);
#ifdef SSIF_DEBUG
device_printf(dev, "SSIF: READ_START retry\n");
#endif
/* Give the BMC another 10ms. */
pause("ssifwt", hz / 100);
goto read_start;
}
if (error) {
#ifdef SSIF_ERROR_DEBUG
device_printf(dev, "SSIF: READ_START failed: %d\n", error);
#endif
goto fail;
}
#ifdef SSIF_DEBUG
device_printf("SSIF: READ_START: ok\n");
#endif
/*
* If this is the first part of a multi-part read, then we need to
* skip the first two bytes.
*/
if (count == SMBUS_DATA_SIZE && ssif_buf[0] == 0 && ssif_buf[1] == 1)
offset = 2;
else
offset = 0;
/* We had better get the reply header. */
if (count < 3) {
device_printf(dev, "SSIF: Short reply packet\n");
goto fail;
}
/* Verify the NetFn/LUN. */
if (ssif_buf[offset] != IPMI_REPLY_ADDR(req->ir_addr)) {
device_printf(dev, "SSIF: Reply address mismatch\n");
goto fail;
}
/* Verify the command. */
if (ssif_buf[offset + 1] != req->ir_command) {
device_printf(dev, "SMIC: Command mismatch\n");
goto fail;
}
/* Read the completion code. */
req->ir_compcode = ssif_buf[offset + 2];
/* If this is a single read, just copy the data and return. */
if (offset == 0) {
#ifdef SSIF_DEBUG
dump_buffer(dev, "READ_SINGLE", ssif_buf, count);
#endif
len = count - 3;
bcopy(&ssif_buf[3], req->ir_reply,
min(req->ir_replybuflen, len));
goto done;
}
/*
* This is the first part of a multi-read transaction, so copy
* out the payload and start looping.
*/
#ifdef SSIF_DEBUG
dump_buffer(dev, "READ_START", ssif_buf + 2, count - 2);
#endif
bcopy(&ssif_buf[5], req->ir_reply, min(req->ir_replybuflen, count - 5));
len = count - 5;
block = 1;
for (;;) {
/* Read another packet via READ_CONT. */
count = SMBUS_DATA_SIZE;
error = smbus_error(smbus_bread(smbus,
sc->ipmi_ssif_smbus_address, SMBUS_READ_CONT, &count,
ssif_buf));
if (error) {
#ifdef SSIF_ERROR_DEBUG
printf("SSIF: READ_CONT failed: %d\n", error);
#endif
goto fail;
}
#ifdef SSIF_DEBUG
device_printf(dev, "SSIF: READ_CONT... ok\n");
#endif
/* Verify the block number. 0xff marks the last block. */
if (ssif_buf[0] != 0xff && ssif_buf[0] != block) {
device_printf(dev, "SSIF: Read wrong block %d %d\n",
ssif_buf[0], block);
goto fail;
}
if (ssif_buf[0] != 0xff && count < SMBUS_DATA_SIZE) {
device_printf(dev,
"SSIF: Read short middle block, length %d\n",
count);
goto fail;
}
#ifdef SSIF_DEBUG
if (ssif_buf[0] == 0xff)
dump_buffer(dev, "READ_END", ssif_buf + 1, count - 1);
else
dump_buffer(dev, "READ_CONT", ssif_buf + 1, count - 1);
#endif
if (len < req->ir_replybuflen)
bcopy(&ssif_buf[1], &req->ir_reply[len],
min(req->ir_replybuflen - len, count - 1));
len += count - 1;
/* If this was the last block we are done. */
if (ssif_buf[0] != 0xff)
break;
block++;
}
done:
/* Save the total length and return success. */
req->ir_replylen = len;
smbus_release_bus(smbus, dev);
return (1);
fail:
smbus_release_bus(smbus, dev);
return (0);
}
static void
ssif_loop(void *arg)
{
struct ipmi_softc *sc = arg;
struct ipmi_request *req;
int i, ok;
IPMI_LOCK(sc);
while ((req = ipmi_dequeue_request(sc)) != NULL) {
IPMI_UNLOCK(sc);
ok = 0;
for (i = 0; i < 5; i++) {
ok = ssif_polled_request(sc, req);
if (ok)
break;
/* Wait 60 ms between retries. */
pause("retry", 60 * hz / 1000);
#ifdef SSIF_RETRY_DEBUG
device_printf(sc->ipmi_dev,
"SSIF: Retrying request (%d)\n", i + 1);
#endif
}
if (ok)
req->ir_error = 0;
else
req->ir_error = EIO;
IPMI_LOCK(sc);
ipmi_complete_request(sc, req);
IPMI_UNLOCK(sc);
/* Enforce 10ms between requests. */
pause("delay", hz / 100);
IPMI_LOCK(sc);
}
IPMI_UNLOCK(sc);
kproc_exit(0);
}
static int
ssif_startup(struct ipmi_softc *sc)
{
return (kproc_create(ssif_loop, sc, &sc->ipmi_kthread, 0, 0,
"%s: ssif", device_get_nameunit(sc->ipmi_dev)));
}
int
ipmi_ssif_attach(struct ipmi_softc *sc, device_t smbus, int smbus_address)
{
/* Setup smbus address. */
sc->ipmi_ssif_smbus = smbus;
sc->ipmi_ssif_smbus_address = smbus_address;
/* Setup function pointers. */
sc->ipmi_startup = ssif_startup;
sc->ipmi_enqueue_request = ipmi_polled_enqueue_request;
return (0);
}