freebsd-dev/sys/dev/uart/uart_bus.h
Marcel Moolenaar 0acb3c4aac Fix RTS/CTS flow control, broken by the TTY overhaul. The new TTY
interface is fairly simple WRT dealing with flow control, but
needed 2 new RX buffer functions with "get-char-from-buf" separated
from "advance-buf-pointer" so that the pointer could be advanced
only when ttydisc_rint() succeeded.

MFC after:	1 week
2009-10-02 22:30:44 +00:00

216 lines
5.6 KiB
C

/*-
* Copyright (c) 2003 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_UART_BUS_H_
#define _DEV_UART_BUS_H_
#ifndef KLD_MODULE
#include "opt_uart.h"
#endif
#include <sys/serial.h>
#include <sys/timepps.h>
/* Drain and flush targets. */
#define UART_DRAIN_RECEIVER 0x0001
#define UART_DRAIN_TRANSMITTER 0x0002
#define UART_FLUSH_RECEIVER UART_DRAIN_RECEIVER
#define UART_FLUSH_TRANSMITTER UART_DRAIN_TRANSMITTER
/* Received character status bits. */
#define UART_STAT_BREAK 0x0100
#define UART_STAT_FRAMERR 0x0200
#define UART_STAT_OVERRUN 0x0400
#define UART_STAT_PARERR 0x0800
#ifdef UART_PPS_ON_CTS
#define UART_SIG_DPPS SER_DCTS
#define UART_SIG_PPS SER_CTS
#else
#define UART_SIG_DPPS SER_DDCD
#define UART_SIG_PPS SER_DCD
#endif
/* UART_IOCTL() requests */
#define UART_IOCTL_BREAK 1
#define UART_IOCTL_IFLOW 2
#define UART_IOCTL_OFLOW 3
#define UART_IOCTL_BAUD 4
/*
* UART class & instance (=softc)
*/
struct uart_class {
KOBJ_CLASS_FIELDS;
struct uart_ops *uc_ops; /* Low-level console operations. */
u_int uc_range; /* Bus space address range. */
u_int uc_rclk; /* Default rclk for this device. */
};
struct uart_softc {
KOBJ_FIELDS;
struct uart_class *sc_class;
struct uart_bas sc_bas;
device_t sc_dev;
struct mtx sc_hwmtx_s; /* Spinlock protecting hardware. */
struct mtx *sc_hwmtx;
struct resource *sc_rres; /* Register resource. */
int sc_rrid;
int sc_rtype; /* SYS_RES_{IOPORT|MEMORY}. */
struct resource *sc_ires; /* Interrupt resource. */
void *sc_icookie;
int sc_irid;
int sc_callout:1; /* This UART is opened for callout. */
int sc_fastintr:1; /* This UART uses fast interrupts. */
int sc_hwiflow:1; /* This UART has HW input flow ctl. */
int sc_hwoflow:1; /* This UART has HW output flow ctl. */
int sc_leaving:1; /* This UART is going away. */
int sc_opened:1; /* This UART is open for business. */
int sc_polled:1; /* This UART has no interrupts. */
int sc_txbusy:1; /* This UART is transmitting. */
int sc_isquelch:1; /* This UART has input squelched. */
struct uart_devinfo *sc_sysdev; /* System device (or NULL). */
int sc_altbrk; /* State for alt break sequence. */
uint32_t sc_hwsig; /* Signal state. Used by HW driver. */
/* Receiver data. */
uint16_t *sc_rxbuf;
int sc_rxbufsz;
int sc_rxput;
int sc_rxget;
int sc_rxfifosz; /* Size of RX FIFO. */
/* Transmitter data. */
uint8_t *sc_txbuf;
int sc_txdatasz;
int sc_txfifosz; /* Size of TX FIFO and buffer. */
/* Pulse capturing support (PPS). */
struct pps_state sc_pps;
/* Upper layer data. */
void *sc_softih;
uint32_t sc_ttypend;
union {
/* TTY specific data. */
struct {
struct tty *tp;
} u_tty;
/* Keyboard specific data. */
struct {
} u_kbd;
} sc_u;
};
extern devclass_t uart_devclass;
extern char uart_driver_name[];
int uart_bus_attach(device_t dev);
int uart_bus_detach(device_t dev);
serdev_intr_t *uart_bus_ihand(device_t dev, int ipend);
int uart_bus_ipend(device_t dev);
int uart_bus_probe(device_t dev, int regshft, int rclk, int rid, int chan);
int uart_bus_sysdev(device_t dev);
void uart_sched_softih(struct uart_softc *, uint32_t);
int uart_tty_attach(struct uart_softc *);
int uart_tty_detach(struct uart_softc *);
void uart_tty_intr(void *arg);
/*
* Receive buffer operations.
*/
static __inline int
uart_rx_empty(struct uart_softc *sc)
{
return ((sc->sc_rxget == sc->sc_rxput) ? 1 : 0);
}
static __inline int
uart_rx_full(struct uart_softc *sc)
{
return ((sc->sc_rxput + 1 < sc->sc_rxbufsz)
? (sc->sc_rxput + 1 == sc->sc_rxget) : (sc->sc_rxget == 0));
}
static __inline int
uart_rx_get(struct uart_softc *sc)
{
int ptr, xc;
ptr = sc->sc_rxget;
if (ptr == sc->sc_rxput)
return (-1);
xc = sc->sc_rxbuf[ptr++];
sc->sc_rxget = (ptr < sc->sc_rxbufsz) ? ptr : 0;
return (xc);
}
static __inline int
uart_rx_next(struct uart_softc *sc)
{
int ptr;
ptr = sc->sc_rxget;
if (ptr == sc->sc_rxput)
return (-1);
ptr += 1;
sc->sc_rxget = (ptr < sc->sc_rxbufsz) ? ptr : 0;
return (0);
}
static __inline int
uart_rx_peek(struct uart_softc *sc)
{
int ptr;
ptr = sc->sc_rxget;
return ((ptr == sc->sc_rxput) ? -1 : sc->sc_rxbuf[ptr]);
}
static __inline int
uart_rx_put(struct uart_softc *sc, int xc)
{
int ptr;
ptr = (sc->sc_rxput + 1 < sc->sc_rxbufsz) ? sc->sc_rxput + 1 : 0;
if (ptr == sc->sc_rxget)
return (ENOSPC);
sc->sc_rxbuf[sc->sc_rxput] = xc;
sc->sc_rxput = ptr;
return (0);
}
#endif /* _DEV_UART_BUS_H_ */