d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3238c6bd33
freebsd-dev/sys/dev/mpt/mpt.h
Ruslan Ermilov f4e9888107 Fix -Wundef.
2005-12-04 02:12:43 +00:00

854 lines
28 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Generic defines for LSI '909 FC adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Additional Copyright (c) 2002 by Matthew Jacob under same license.
*/
/*
* Copyright (c) 2004, Avid Technology, Inc. and its contributors.
* Copyright (c) 2004, 2005 Justin T. Gibbs
* Copyright (c) 2005, WHEEL Sp. z o.o.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MPT_H_
#define _MPT_H_
/********************************* OS Includes ********************************/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/eventhandler.h>
#if __FreeBSD_version < 500000
#include <sys/kernel.h>
#include <sys/queue.h>
#include <sys/malloc.h>
#else
#include <sys/lock.h>
#include <sys/kernel.h>
#include <sys/queue.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#endif
#include <sys/proc.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include "opt_ddb.h"
/**************************** Register Definitions ****************************/
#include <dev/mpt/mpt_reg.h>
/******************************* MPI Definitions ******************************/
#include <dev/mpt/mpilib/mpi_type.h>
#include <dev/mpt/mpilib/mpi.h>
#include <dev/mpt/mpilib/mpi_cnfg.h>
#include <dev/mpt/mpilib/mpi_ioc.h>
#include <dev/mpt/mpilib/mpi_raid.h>
/* XXX For mpt_debug.c */
#include <dev/mpt/mpilib/mpi_init.h>
/****************************** Misc Definitions ******************************/
#define MPT_OK (0)
#define MPT_FAIL (0x10000)
#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
/**************************** Forward Declarations ****************************/
struct mpt_softc;
struct mpt_personality;
typedef struct req_entry request_t;
/************************* Personality Module Support *************************/
typedef int mpt_load_handler_t(struct mpt_personality *);
typedef int mpt_probe_handler_t(struct mpt_softc *);
typedef int mpt_attach_handler_t(struct mpt_softc *);
typedef int mpt_event_handler_t(struct mpt_softc *, request_t *,
MSG_EVENT_NOTIFY_REPLY *);
typedef void mpt_reset_handler_t(struct mpt_softc *, int /*type*/);
/* XXX Add return value and use for veto? */
typedef void mpt_shutdown_handler_t(struct mpt_softc *);
typedef void mpt_detach_handler_t(struct mpt_softc *);
typedef int mpt_unload_handler_t(struct mpt_personality *);
struct mpt_personality
{
const char *name;
uint32_t id; /* Assigned identifier. */
u_int use_count; /* Instances using personality*/
mpt_load_handler_t *load; /* configure personailty */
#define MPT_PERS_FIRST_HANDLER(pers) (&(pers)->load)
mpt_probe_handler_t *probe; /* configure personailty */
mpt_attach_handler_t *attach; /* initialize device instance */
mpt_event_handler_t *event; /* Handle MPI event. */
mpt_reset_handler_t *reset; /* Re-init after reset. */
mpt_shutdown_handler_t *shutdown; /* Shutdown instance. */
mpt_detach_handler_t *detach; /* release device instance */
mpt_unload_handler_t *unload; /* Shutdown personality */
#define MPT_PERS_LAST_HANDLER(pers) (&(pers)->unload)
};
int mpt_modevent(module_t, int, void *);
/* Maximum supported number of personalities. */
#define MPT_MAX_PERSONALITIES (15)
#define MPT_PERSONALITY_DEPEND(name, dep, vmin, vpref, vmax) \
MODULE_DEPEND(name, dep, vmin, vpref, vmax)
#define DECLARE_MPT_PERSONALITY(name, order) \
static moduledata_t name##_mod = { \
#name, mpt_modevent, &name##_personality \
}; \
DECLARE_MODULE(name, name##_mod, SI_SUB_DRIVERS, order); \
MODULE_VERSION(name, 1); \
MPT_PERSONALITY_DEPEND(name, mpt_core, 1, 1, 1)
/******************************* Bus DMA Support ******************************/
/* XXX Need to update bus_dmamap_sync to take a range argument. */
#define bus_dmamap_sync_range(dma_tag, dmamap, offset, len, op) \
bus_dmamap_sync(dma_tag, dmamap, op)
#if __FreeBSD_version >= 501102
#define mpt_dma_tag_create(mpt, parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
dma_tagp) \
bus_dma_tag_create(parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
busdma_lock_mutex, &Giant, \
dma_tagp)
#else
#define mpt_dma_tag_create(mpt, parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
dma_tagp) \
bus_dma_tag_create(parent_tag, alignment, boundary, \
lowaddr, highaddr, filter, filterarg, \
maxsize, nsegments, maxsegsz, flags, \
dma_tagp)
#endif
struct mpt_map_info {
struct mpt_softc *mpt;
int error;
uint32_t phys;
};
void mpt_map_rquest(void *, bus_dma_segment_t *, int, int);
/**************************** Kernel Thread Support ***************************/
#if __FreeBSD_version > 500005
#define mpt_kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \
kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg)
#else
#define mpt_kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \
kthread_create(func, farg, proc_ptr, fmtstr, arg)
#endif
/****************************** Timer Facilities ******************************/
#if __FreeBSD_version > 500000
#define mpt_callout_init(c) callout_init(c, /*mpsafe*/0);
#else
#define mpt_callout_init(c) callout_init(c);
#endif
/********************************** Endianess *********************************/
static __inline uint64_t
u64toh(U64 s)
{
uint64_t result;
result = le32toh(s.Low);
result |= ((uint64_t)le32toh(s.High)) << 32;
return (result);
}
/**************************** MPI Transaction State ***************************/
typedef enum {
REQ_STATE_FREE = 0x00,
REQ_STATE_ALLOCATED = 0x01,
REQ_STATE_QUEUED = 0x02,
REQ_STATE_DONE = 0x04,
REQ_STATE_TIMEDOUT = 0x08,
REQ_STATE_NEED_WAKEUP = 0x10,
REQ_STATE_MASK = 0xFF
} mpt_req_state_t;
struct req_entry {
TAILQ_ENTRY(req_entry) links; /* Pointer to next in list */
mpt_req_state_t state; /* Request State Information */
uint16_t index; /* Index of this entry */
uint16_t IOCStatus; /* Completion status */
union ccb *ccb; /* CAM request */
void *req_vbuf; /* Virtual Address of Entry */
void *sense_vbuf; /* Virtual Address of sense data */
bus_addr_t req_pbuf; /* Physical Address of Entry */
bus_addr_t sense_pbuf; /* Physical Address of sense data */
bus_dmamap_t dmap; /* DMA map for data buffer */
};
/**************************** Handler Registration ****************************/
/*
* Global table of registered reply handlers. The
* handler is indicated by byte 3 of the request
* index submitted to the IOC. This allows the
* driver core to perform generic processing without
* any knowledge of per-personality behavior.
*
* MPT_NUM_REPLY_HANDLERS must be a power of 2
* to allow the easy generation of a mask.
*
* The handler offsets used by the core are hard coded
* allowing faster code generation when assigning a handler
* to a request. All "personalities" must use the
* the handler registration mechanism.
*
* The IOC handlers that are rarely executed are placed
* at the tail of the table to make it more likely that
* all commonly executed handlers fit in a single cache
* line.
*/
#define MPT_NUM_REPLY_HANDLERS (16)
#define MPT_REPLY_HANDLER_EVENTS MPT_CBI_TO_HID(0)
#define MPT_REPLY_HANDLER_CONFIG MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-1)
#define MPT_REPLY_HANDLER_HANDSHAKE MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-2)
typedef int mpt_reply_handler_t(struct mpt_softc *mpt, request_t *request,
MSG_DEFAULT_REPLY *reply_frame);
typedef union {
mpt_reply_handler_t *reply_handler;
} mpt_handler_t;
typedef enum {
MPT_HANDLER_REPLY,
MPT_HANDLER_EVENT,
MPT_HANDLER_RESET,
MPT_HANDLER_SHUTDOWN
} mpt_handler_type;
struct mpt_handler_record
{
LIST_ENTRY(mpt_handler_record) links;
mpt_handler_t handler;
};
LIST_HEAD(mpt_handler_list, mpt_handler_record);
/*
* The handler_id is currently unused but would contain the
* handler ID used in the MsgContext field to allow direction
* of replies to the handler. Registrations that don't require
* a handler id can pass in NULL for the handler_id.
*
* Deregistrations for handlers without a handler id should
* pass in MPT_HANDLER_ID_NONE.
*/
#define MPT_HANDLER_ID_NONE (0xFFFFFFFF)
int mpt_register_handler(struct mpt_softc *, mpt_handler_type,
mpt_handler_t, uint32_t *);
int mpt_deregister_handler(struct mpt_softc *, mpt_handler_type,
mpt_handler_t, uint32_t);
/******************* Per-Controller Instance Data Structures ******************/
TAILQ_HEAD(req_queue, req_entry);
/* Structure for saving proper values for modifyable PCI config registers */
struct mpt_pci_cfg {
uint16_t Command;
uint16_t LatencyTimer_LineSize;
uint32_t IO_BAR;
uint32_t Mem0_BAR[2];
uint32_t Mem1_BAR[2];
uint32_t ROM_BAR;
uint8_t IntLine;
uint32_t PMCSR;
};
typedef enum {
MPT_RVF_NONE = 0x0,
MPT_RVF_ACTIVE = 0x1,
MPT_RVF_ANNOUNCED = 0x2,
MPT_RVF_UP2DATE = 0x4,
MPT_RVF_REFERENCED = 0x8,
MPT_RVF_WCE_CHANGED = 0x10
} mpt_raid_volume_flags;
struct mpt_raid_volume {
CONFIG_PAGE_RAID_VOL_0 *config_page;
MPI_RAID_VOL_INDICATOR sync_progress;
mpt_raid_volume_flags flags;
u_int quieced_disks;
};
typedef enum {
MPT_RDF_NONE = 0x00,
MPT_RDF_ACTIVE = 0x01,
MPT_RDF_ANNOUNCED = 0x02,
MPT_RDF_UP2DATE = 0x04,
MPT_RDF_REFERENCED = 0x08,
MPT_RDF_QUIESCING = 0x10,
MPT_RDF_QUIESCED = 0x20
} mpt_raid_disk_flags;
struct mpt_raid_disk {
CONFIG_PAGE_RAID_PHYS_DISK_0 config_page;
struct mpt_raid_volume *volume;
u_int member_number;
u_int pass_thru_active;
mpt_raid_disk_flags flags;
};
struct mpt_evtf_record {
MSG_EVENT_NOTIFY_REPLY reply;
uint32_t context;
LIST_ENTRY(mpt_evtf_record) links;
};
LIST_HEAD(mpt_evtf_list, mpt_evtf_record);
struct mpt_softc {
device_t dev;
#if __FreeBSD_version < 500000
int mpt_splsaved;
uint32_t mpt_islocked;
#else
struct mtx mpt_lock;
#endif
uint32_t mpt_pers_mask;
uint32_t : 15,
raid_mwce_set : 1,
getreqwaiter : 1,
shutdwn_raid : 1,
shutdwn_recovery: 1,
unit : 8,
outofbeer : 1,
mpt_locksetup : 1,
disabled : 1,
is_fc : 1,
bus : 1; /* FC929/1030 have two busses */
u_int verbose;
/*
* IOC Facts
*/
uint16_t mpt_global_credits;
uint16_t request_frame_size;
uint8_t mpt_max_devices;
uint8_t mpt_max_buses;
/*
* Port Facts
* XXX - Add multi-port support!.
*/
uint16_t mpt_ini_id;
uint16_t mpt_port_type;
uint16_t mpt_proto_flags;
/*
* Device Configuration Information
*/
union {
struct mpt_spi_cfg {
CONFIG_PAGE_SCSI_PORT_0 _port_page0;
CONFIG_PAGE_SCSI_PORT_1 _port_page1;
CONFIG_PAGE_SCSI_PORT_2 _port_page2;
CONFIG_PAGE_SCSI_DEVICE_0 _dev_page0[16];
CONFIG_PAGE_SCSI_DEVICE_1 _dev_page1[16];
uint16_t _tag_enable;
uint16_t _disc_enable;
uint16_t _update_params0;
uint16_t _update_params1;
} spi;
#define mpt_port_page0 cfg.spi._port_page0
#define mpt_port_page1 cfg.spi._port_page1
#define mpt_port_page2 cfg.spi._port_page2
#define mpt_dev_page0 cfg.spi._dev_page0
#define mpt_dev_page1 cfg.spi._dev_page1
#define mpt_tag_enable cfg.spi._tag_enable
#define mpt_disc_enable cfg.spi._disc_enable
#define mpt_update_params0 cfg.spi._update_params0
#define mpt_update_params1 cfg.spi._update_params1
struct mpi_fc_cfg {
uint8_t nada;
} fc;
} cfg;
/* Controller Info */
CONFIG_PAGE_IOC_2 * ioc_page2;
CONFIG_PAGE_IOC_3 * ioc_page3;
/* Raid Data */
struct mpt_raid_volume* raid_volumes;
struct mpt_raid_disk* raid_disks;
u_int raid_max_volumes;
u_int raid_max_disks;
u_int raid_page0_len;
u_int raid_wakeup;
u_int raid_rescan;
u_int raid_resync_rate;
u_int raid_mwce_setting;
u_int raid_queue_depth;
u_int raid_nonopt_volumes;
struct proc *raid_thread;
struct callout raid_timer;
/*
* PCI Hardware info
*/
struct resource * pci_irq; /* Interrupt map for chip */
void * ih; /* Interupt handle */
struct mpt_pci_cfg pci_cfg; /* saved PCI conf registers */
/*
* DMA Mapping Stuff
*/
struct resource * pci_reg; /* Register map for chip */
int pci_mem_rid; /* Resource ID */
bus_space_tag_t pci_st; /* Bus tag for registers */
bus_space_handle_t pci_sh; /* Bus handle for registers */
/* PIO versions of above. */
int pci_pio_rid;
struct resource * pci_pio_reg;
bus_space_tag_t pci_pio_st;
bus_space_handle_t pci_pio_sh;
bus_dma_tag_t parent_dmat; /* DMA tag for parent PCI bus */
bus_dma_tag_t reply_dmat; /* DMA tag for reply memory */
bus_dmamap_t reply_dmap; /* DMA map for reply memory */
uint8_t *reply; /* KVA of reply memory */
bus_addr_t reply_phys; /* BusAddr of reply memory */
bus_dma_tag_t buffer_dmat; /* DMA tag for buffers */
bus_dma_tag_t request_dmat; /* DMA tag for request memroy */
bus_dmamap_t request_dmap; /* DMA map for request memroy */
uint8_t *request; /* KVA of Request memory */
bus_addr_t request_phys; /* BusADdr of request memory */
u_int reset_cnt;
/*
* CAM && Software Management
*/
request_t *request_pool;
struct req_queue request_free_list;
struct req_queue request_pending_list;
struct req_queue request_timeout_list;
/*
* Deferred frame acks due to resource shortage.
*/
struct mpt_evtf_list ack_frames;
struct cam_sim *sim;
struct cam_path *path;
struct cam_sim *phydisk_sim;
struct cam_path *phydisk_path;
struct proc *recovery_thread;
request_t *tmf_req;
uint32_t sequence; /* Sequence Number */
uint32_t timeouts; /* timeout count */
uint32_t success; /* successes afer timeout */
/* Opposing port in a 929 or 1030, or NULL */
struct mpt_softc * mpt2;
/* FW Image management */
uint32_t fw_image_size;
uint8_t *fw_image;
bus_dma_tag_t fw_dmat; /* DMA tag for firmware image */
bus_dmamap_t fw_dmap; /* DMA map for firmware image */
bus_addr_t fw_phys; /* BusAddr of request memory */
/* Shutdown Event Handler. */
eventhandler_tag eh;
TAILQ_ENTRY(mpt_softc) links;
};
/***************************** Locking Primatives *****************************/
#if __FreeBSD_version < 500000
#define MPT_IFLAGS INTR_TYPE_CAM
#define MPT_LOCK(mpt) mpt_lockspl(mpt)
#define MPT_UNLOCK(mpt) mpt_unlockspl(mpt)
#define MPTLOCK_2_CAMLOCK MPT_UNLOCK
#define CAMLOCK_2_MPTLOCK MPT_LOCK
#define MPT_LOCK_SETUP(mpt)
#define MPT_LOCK_DESTROY(mpt)
static __inline void mpt_lockspl(struct mpt_softc *mpt);
static __inline void mpt_unlockspl(struct mpt_softc *mpt);
static __inline void
mpt_lockspl(struct mpt_softc *mpt)
{
int s;
s = splcam();
if (mpt->mpt_islocked++ == 0) {
mpt->mpt_splsaved = s;
} else {
splx(s);
panic("Recursed lock with mask: 0x%x\n", s);
}
}
static __inline void
mpt_unlockspl(struct mpt_softc *mpt)
{
if (mpt->mpt_islocked) {
if (--mpt->mpt_islocked == 0) {
splx(mpt->mpt_splsaved);
}
} else
panic("Negative lock count\n");
}
static __inline int
mpt_sleep(struct mpt_softc *mpt, void *ident, int priority,
const char *wmesg, int timo)
{
int saved_cnt;
int saved_spl;
int error;
KASSERT(mpt->mpt_islocked <= 1, ("Invalid lock count on tsleep"));
saved_cnt = mpt->mpt_islocked;
saved_spl = mpt->mpt_splsaved;
mpt->mpt_islocked = 0;
error = tsleep(ident, priority, wmesg, timo);
KASSERT(mpt->mpt_islocked = 0, ("Invalid lock count on wakeup"));
mpt->mpt_islocked = saved_cnt;
mpt->mpt_splsaved = saved_spl;
return (error);
}
#else
#ifdef LOCKING_WORKED_AS_IT_SHOULD
#error "Shouldn't Be Here!"
#define MPT_IFLAGS INTR_TYPE_CAM | INTR_ENTROPY | INTR_MPSAFE
#define MPT_LOCK_SETUP(mpt) \
mtx_init(&mpt->mpt_lock, "mpt", NULL, MTX_DEF); \
mpt->mpt_locksetup = 1
#define MPT_LOCK_DESTROY(mpt) \
if (mpt->mpt_locksetup) { \
mtx_destroy(&mpt->mpt_lock); \
mpt->mpt_locksetup = 0; \
}
#define MPT_LOCK(mpt) mtx_lock(&(mpt)->mpt_lock)
#define MPT_UNLOCK(mpt) mtx_unlock(&(mpt)->mpt_lock)
#define MPTLOCK_2_CAMLOCK(mpt) \
mtx_unlock(&(mpt)->mpt_lock); mtx_lock(&Giant)
#define CAMLOCK_2_MPTLOCK(mpt) \
mtx_unlock(&Giant); mtx_lock(&(mpt)->mpt_lock)
#define mpt_sleep(mpt, ident, priority, wmesg, timo) \
msleep(ident, &(mpt)->mpt_lock, priority, wmesg, timo)
#else
#define MPT_IFLAGS INTR_TYPE_CAM | INTR_ENTROPY
#define MPT_LOCK_SETUP(mpt) do { } while (0)
#define MPT_LOCK_DESTROY(mpt) do { } while (0)
#define MPT_LOCK(mpt) do { } while (0)
#define MPT_UNLOCK(mpt) do { } while (0)
#define MPTLOCK_2_CAMLOCK(mpt) do { } while (0)
#define CAMLOCK_2_MPTLOCK(mpt) do { } while (0)
#define mpt_sleep(mpt, ident, priority, wmesg, timo) \
tsleep(ident, priority, wmesg, timo)
#endif
#endif
/******************************* Register Access ******************************/
static __inline void mpt_write(struct mpt_softc *, size_t, uint32_t);
static __inline uint32_t mpt_read(struct mpt_softc *, int);
static __inline void mpt_pio_write(struct mpt_softc *, size_t, uint32_t);
static __inline uint32_t mpt_pio_read(struct mpt_softc *, int);
static __inline void
mpt_write(struct mpt_softc *mpt, size_t offset, uint32_t val)
{
bus_space_write_4(mpt->pci_st, mpt->pci_sh, offset, val);
}
static __inline uint32_t
mpt_read(struct mpt_softc *mpt, int offset)
{
return (bus_space_read_4(mpt->pci_st, mpt->pci_sh, offset));
}
/*
* Some operations (e.g. diagnostic register writes while the ARM proccessor
* is disabled), must be performed using "PCI pio" operations. On non-PCI
* busses, these operations likely map to normal register accesses.
*/
static __inline void
mpt_pio_write(struct mpt_softc *mpt, size_t offset, uint32_t val)
{
bus_space_write_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset, val);
}
static __inline uint32_t
mpt_pio_read(struct mpt_softc *mpt, int offset)
{
return (bus_space_read_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset));
}
/*********************** Reply Frame/Request Management ***********************/
/* Max MPT Reply we are willing to accept (must be power of 2) */
#define MPT_REPLY_SIZE 128
#define MPT_MAX_REQUESTS(mpt) ((mpt)->is_fc ? 1024 : 256)
#define MPT_REQUEST_AREA 512
#define MPT_SENSE_SIZE 32 /* included in MPT_REQUEST_SIZE */
#define MPT_REQ_MEM_SIZE(mpt) (MPT_MAX_REQUESTS(mpt) * MPT_REQUEST_AREA)
#define MPT_CONTEXT_CB_SHIFT (16)
#define MPT_CBI(handle) (handle >> MPT_CONTEXT_CB_SHIFT)
#define MPT_CBI_TO_HID(cbi) ((cbi) << MPT_CONTEXT_CB_SHIFT)
#define MPT_CONTEXT_TO_CBI(x) \
(((x) >> MPT_CONTEXT_CB_SHIFT) & (MPT_NUM_REPLY_HANDLERS - 1))
#define MPT_CONTEXT_REQI_MASK 0xFFFF
#define MPT_CONTEXT_TO_REQI(x) \
((x) & MPT_CONTEXT_REQI_MASK)
/*
* Convert a 32bit physical address returned from IOC to an
* offset into our reply frame memory or the kvm address needed
* to access the data. The returned address is only the low
* 32 bits, so mask our base physical address accordingly.
*/
#define MPT_REPLY_BADDR(x) \
(x << 1)
#define MPT_REPLY_OTOV(m, i) \
((void *)(&m->reply[i]))
#define MPT_DUMP_REPLY_FRAME(mpt, reply_frame) \
do { \
if (mpt->verbose >= MPT_PRT_DEBUG) \
mpt_dump_reply_frame(mpt, reply_frame); \
} while(0)
static __inline uint32_t mpt_pop_reply_queue(struct mpt_softc *mpt);
static __inline void mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr);
/*
* Give the reply buffer back to the IOC after we have
* finished processing it.
*/
static __inline void
mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr)
{
mpt_write(mpt, MPT_OFFSET_REPLY_Q, ptr);
}
/* Get a reply from the IOC */
static __inline uint32_t
mpt_pop_reply_queue(struct mpt_softc *mpt)
{
return mpt_read(mpt, MPT_OFFSET_REPLY_Q);
}
void mpt_complete_request_chain(struct mpt_softc *mpt,
struct req_queue *chain, u_int iocstatus);
/************************** Scatter Gather Managment **************************/
/*
* We cannot tell prior to getting IOC facts how big the IOC's request
* area is. Because of this we cannot tell at compile time how many
* simple SG elements we can fit within an IOC request prior to having
* to put in a chain element.
*
* Experimentally we know that the Ultra4 parts have a 96 byte request
* element size and the Fibre Channel units have a 144 byte request
* element size. Therefore, if we have 512-32 (== 480) bytes of request
* area to play with, we have room for between 3 and 5 request sized
* regions- the first of which is the command plus a simple SG list,
* the rest of which are chained continuation SG lists. Given that the
* normal request we use is 48 bytes w/o the first SG element, we can
* assume we have 480-48 == 432 bytes to have simple SG elements and/or
* chain elements. If we assume 32 bit addressing, this works out to
* 54 SG or chain elements. If we assume 5 chain elements, then we have
* a maximum of 49 seperate actual SG segments.
*/
#define MPT_SGL_MAX 49
#define MPT_RQSL(mpt) (mpt->request_frame_size << 2)
#define MPT_NSGL(mpt) (MPT_RQSL(mpt) / sizeof (SGE_SIMPLE32))
#define MPT_NSGL_FIRST(mpt) \
(((mpt->request_frame_size << 2) - \
sizeof (MSG_SCSI_IO_REQUEST) - \
sizeof (SGE_IO_UNION)) / sizeof (SGE_SIMPLE32))
/***************************** IOC Initialization *****************************/
int mpt_reset(struct mpt_softc *, int /*reinit*/);
/****************************** Debugging/Logging *****************************/
typedef struct mpt_decode_entry {
char *name;
u_int value;
u_int mask;
} mpt_decode_entry_t;
int mpt_decode_value(mpt_decode_entry_t *table, u_int num_entries,
const char *name, u_int value, u_int *cur_column,
u_int wrap_point);
enum {
MPT_PRT_ALWAYS,
MPT_PRT_FATAL,
MPT_PRT_ERROR,
MPT_PRT_WARN,
MPT_PRT_INFO,
MPT_PRT_DEBUG,
MPT_PRT_TRACE
};
#define mpt_lprt(mpt, level, ...) \
do { \
if (level <= (mpt)->verbose) \
mpt_prt(mpt, __VA_ARGS__); \
} while (0)
#define mpt_lprtc(mpt, level, ...) \
do { \
if (level <= (mpt)->debug_level) \
mpt_prtc(mpt, __VA_ARGS__); \
} while (0)
void mpt_prt(struct mpt_softc *, const char *, ...);
void mpt_prtc(struct mpt_softc *, const char *, ...);
/**************************** Unclassified Routines ***************************/
void mpt_send_cmd(struct mpt_softc *mpt, request_t *req);
int mpt_recv_handshake_reply(struct mpt_softc *mpt,
size_t reply_len, void *reply);
int mpt_wait_req(struct mpt_softc *mpt, request_t *req,
mpt_req_state_t state, mpt_req_state_t mask,
int sleep_ok, int time_ms);
void mpt_enable_ints(struct mpt_softc *mpt);
void mpt_disable_ints(struct mpt_softc *mpt);
int mpt_attach(struct mpt_softc *mpt);
int mpt_shutdown(struct mpt_softc *mpt);
int mpt_detach(struct mpt_softc *mpt);
int mpt_send_handshake_cmd(struct mpt_softc *mpt,
size_t len, void *cmd);
request_t * mpt_get_request(struct mpt_softc *mpt, int sleep_ok);
void mpt_free_request(struct mpt_softc *mpt, request_t *req);
void mpt_intr(void *arg);
void mpt_check_doorbell(struct mpt_softc *mpt);
void mpt_dump_reply_frame(struct mpt_softc *mpt,
MSG_DEFAULT_REPLY *reply_frame);
void mpt_set_config_regs(struct mpt_softc *);
int mpt_issue_cfg_req(struct mpt_softc */*mpt*/, request_t */*req*/,
u_int /*Action*/, u_int /*PageVersion*/,
u_int /*PageLength*/, u_int /*PageNumber*/,
u_int /*PageType*/, uint32_t /*PageAddress*/,
bus_addr_t /*addr*/, bus_size_t/*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_read_cfg_header(struct mpt_softc *, int /*PageType*/,
int /*PageNumber*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_read_cfg_page(struct mpt_softc *t, int /*Action*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *, size_t /*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
int mpt_write_cfg_page(struct mpt_softc *, int /*Action*/,
uint32_t /*PageAddress*/,
CONFIG_PAGE_HEADER *, size_t /*len*/,
int /*sleep_ok*/, int /*timeout_ms*/);
static __inline int
mpt_read_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress,
CONFIG_PAGE_HEADER *hdr, size_t len,
int sleep_ok, int timeout_ms)
{
return (mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT,
PageAddress, hdr, len, sleep_ok, timeout_ms));
}
static __inline int
mpt_write_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress,
CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok,
int timeout_ms)
{
return (mpt_write_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT,
PageAddress, hdr, len, sleep_ok,
timeout_ms));
}
/* mpt_debug.c functions */
void mpt_print_reply(void *vmsg);
void mpt_print_db(uint32_t mb);
void mpt_print_config_reply(void *vmsg);
char *mpt_ioc_diag(uint32_t diag);
void mpt_req_state(mpt_req_state_t state);
void mpt_print_config_request(void *vmsg);
void mpt_print_request(void *vmsg);
void mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *msg);
#endif /* _MPT_H_ */
Reference in New Issue View Git Blame Copy Permalink