f4459b9645
and enable it for Odroid C1 board. Together with r291676 change, dwc(4) can receive packets now.
397 lines
8.9 KiB
Plaintext
397 lines
8.9 KiB
Plaintext
/*-
|
|
* Copyright (c) 2015 John Wehle <john@feith.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* The ordering of certain devices is significant (e.g. usb depends on
|
|
* usb-phy which depends on gpio, also the timer should appear early on
|
|
* to provide a reasonably accurate DELAY implementation).
|
|
*
|
|
* Both usb-phys devices must be configured to prevent the usb controller
|
|
* from hanging during initialization.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/memreserve/ 0x7900000 0x00600000; /* 6MB frame buffer */
|
|
|
|
#include "meson8b.dtsi"
|
|
|
|
/ {
|
|
model = "hardkernel,odroid-c1";
|
|
compatible = "hardkernel,odroid-c1", "amlogic,s805";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
soc = &soc;
|
|
screen = &screen;
|
|
uart0 = &uart_AO;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000>; /* 1GB RAM */
|
|
};
|
|
|
|
soc: soc {
|
|
device_type = "soc";
|
|
bus-frequency = <0>;
|
|
|
|
scu: scu@c4300000 {
|
|
compatible = "arm,cortex-a5-scu";
|
|
reg = <0xc4300000 0x1000>;
|
|
};
|
|
|
|
cpuconfig: cpuconfig@d901ff80 {
|
|
compatible = "amlogic,aml8726-cpuconfig";
|
|
reg = <0xd901ff80 16>;
|
|
};
|
|
|
|
ccm@c1104140 {
|
|
compatible = "amlogic,aml8726-ccm";
|
|
reg = <0xc1104140 20>; /* cbus 0x1050 */
|
|
|
|
functions = "ethernet", "i2c", "rng", "sdio", "sdxc",
|
|
"uart-a", "uart-b", "uart-c",
|
|
"usb-a", "usb-b";
|
|
};
|
|
|
|
pinctrl@c11080b0 {
|
|
compatible = "amlogic,aml8726-pinctrl";
|
|
reg = <0xc11080b0 40>, /* mux */
|
|
<0xc11080e8 24>, /* pu/pd */
|
|
<0xc1108120 24>, /* pull enable */
|
|
<0xc8100014 4>, /* ao mux */
|
|
<0xc810002c 4>, /* ao pu/pd */
|
|
<0xc810002c 4>; /* ao pull enable */
|
|
|
|
/*
|
|
* Currently only pin muxing that deviates
|
|
* from the power on default of gpio is
|
|
* specified here.
|
|
*/
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
|
|
|
|
pins_ethernet: ethernet {
|
|
amlogic,pins = "ref_clk",
|
|
"tx_clk", "tx_en",
|
|
"tx_d0", "tx_d1",
|
|
"tx_d2", "tx_d3",
|
|
"rx_clk", "rx_dv",
|
|
"rx_d0", "rx_d1",
|
|
"rx_d2", "rx_d3",
|
|
"mdc", "mdio";
|
|
amlogic,function = "ethernet";
|
|
};
|
|
|
|
pins_hdmi: hdmi {
|
|
amlogic,pins = "cec", "hpd",
|
|
"scl", "sda";
|
|
amlogic,function = "hdmi";
|
|
};
|
|
|
|
pins_sdio_b: sdio_b {
|
|
amlogic,pins = "clk", "cmd",
|
|
"d0", "d1",
|
|
"d2", "d3";
|
|
amlogic,function = "sdio-b";
|
|
amlogic,pull = "up";
|
|
};
|
|
|
|
pins_sdxc_b: sdxc_b {
|
|
amlogic,pins = "clk", "cmd",
|
|
"d0", "d1",
|
|
"d2", "d3";
|
|
amlogic,function = "sdxc-b";
|
|
amlogic,pull = "up";
|
|
};
|
|
|
|
pins_sdio_c: sdio_c {
|
|
amlogic,pins = "clk", "cmd",
|
|
"d0", "d1",
|
|
"d2", "d3";
|
|
amlogic,function = "sdio-c";
|
|
amlogic,pull = "up";
|
|
};
|
|
|
|
pins_sdxc_c: sdxc_c {
|
|
amlogic,pins = "clk", "cmd",
|
|
"d0", "d1",
|
|
"d2", "d3",
|
|
"d4", "d5",
|
|
"d6", "d7";
|
|
amlogic,function = "sdxc-c";
|
|
amlogic,pull = "up";
|
|
};
|
|
|
|
pins_i2c_a: i2c_a {
|
|
amlogic,pins = "scl", "sda";
|
|
amlogic,function = "i2c-a";
|
|
};
|
|
|
|
pins_i2c_b: i2c_b {
|
|
amlogic,pins = "scl", "sda";
|
|
amlogic,function = "i2c-b";
|
|
};
|
|
|
|
pins_uarta: uarta {
|
|
amlogic,pins = "tx", "rx", "cts", "rts";
|
|
amlogic,function = "uart-a";
|
|
};
|
|
|
|
pins_uartb: uartb {
|
|
|
|
/*
|
|
* gpiox18 appears to have special
|
|
* meaning to the bootloader making
|
|
* hardware handshaking unavailable.
|
|
*/
|
|
|
|
amlogic,pins = "tx", "rx";
|
|
amlogic,function = "uart-b";
|
|
};
|
|
|
|
pins_uartc: uartc {
|
|
amlogic,pins = "tx", "rx", "cts", "rts";
|
|
amlogic,function = "uart-c";
|
|
};
|
|
|
|
pins_uartao: uartao {
|
|
amlogic,pins = "tx", "rx";
|
|
amlogic,function = "uart-ao";
|
|
};
|
|
};
|
|
|
|
rtc@c8100740 {
|
|
compatible = "amlogic,aml8726-rtc";
|
|
reg = <0xc8100740 20>; /* aobus 0x1d0 */
|
|
interrupts = <0 72 1>;
|
|
};
|
|
|
|
clkmsr: clkmsr@c1108758 {
|
|
compatible = "amlogic,aml8726-clkmsr";
|
|
reg = <0xc1108758 16>; /* cbus 0x21d6 */
|
|
|
|
clocks = <&clk81>;
|
|
};
|
|
|
|
gpioao: gpio@c8100024 {
|
|
/* gpio unit 7 */
|
|
compatible = "amlogic,aml8726-gpio";
|
|
reg = <0xc8100024 4>, /* oen aobus 0x9 */
|
|
<0xc8100024 4>, /* out */
|
|
<0xc8100028 4>; /* in */
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
pin-count = <14>;
|
|
};
|
|
|
|
gpio3: gpio@c1108054 {
|
|
compatible = "amlogic,aml8726-gpio";
|
|
reg = <0xc1108054 4>, /* oen cbus 0x2015 */
|
|
<0xc1108058 4>, /* out */
|
|
<0xc110805c 4>; /* in */
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
pin-count = <32>;
|
|
};
|
|
|
|
gpio5: gpio@c110806c {
|
|
compatible = "amlogic,aml8726-gpio";
|
|
reg = <0xc110806c 4>, /* oen cbus 0x201b */
|
|
<0xc1108070 4>, /* out */
|
|
<0xc1108074 4>; /* in */
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
pin-count = <32>;
|
|
};
|
|
|
|
mmc@c1108c20 {
|
|
compatible = "amlogic,aml8726-mmc";
|
|
reg = <0xc1108c20 32>; /* cbus 0x2308 */
|
|
interrupts = <0 28 1>;
|
|
|
|
clocks = <&clk81>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_sdio_b>;
|
|
|
|
/*
|
|
* Ordering is significant.
|
|
*
|
|
* mmc-vselect low sets first voltage
|
|
* mmc-vselect high sets second voltage
|
|
*
|
|
* If mmc-vselect is not present, then
|
|
* only one voltage should be specified.
|
|
*/
|
|
mmc-voltages = "3.3", "1.8";
|
|
mmc-vselect = <&gpioao 3>; /* gpioao_3 */
|
|
|
|
mmc-pwr-en = <&gpio5 31 0>; /* card_8 */
|
|
ins-detect = <&gpio5 29 0>; /* card_6 */
|
|
};
|
|
|
|
sdxc@c1108e00 {
|
|
compatible = "amlogic,aml8726-sdxc-m8";
|
|
clock-frequency = <1275000000>;
|
|
reg = <0xc1108e00 60>; /* cbus 0x2380 */
|
|
interrupts = <0 78 1>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_sdxc_c>;
|
|
|
|
mmc-voltages = "1.8";
|
|
|
|
mmc-rst = <&gpio3 9 0>; /* boot_9 emmc-rst */
|
|
};
|
|
|
|
rng@c1108100 {
|
|
compatible = "amlogic,aml8726-rng";
|
|
reg = <0xc1108100 8>; /* cbus 0x2040 */
|
|
};
|
|
|
|
usb-phy@c1108800 {
|
|
/* usb-a phy */
|
|
compatible = "amlogic,aml8726-m8-usb-phy";
|
|
reg = <0xc1108800 32>; /* cbus 0x2200 */
|
|
|
|
usb-pwr-en = <&gpioao 5 1>; /* gpioao_5 vbus */
|
|
};
|
|
|
|
usb-phy@c1108820 {
|
|
/* usb-b phy */
|
|
compatible = "amlogic,aml8726-m8-usb-phy";
|
|
reg = <0xc1108820 32>; /* cbus 0x2208 */
|
|
|
|
force-aca = "true";
|
|
usb-hub-rst = <&gpioao 4 0>; /* gpioao_4 hub-rst */
|
|
};
|
|
|
|
usb@c9040000 {
|
|
/* usb-a */
|
|
compatible = "synopsys,designware-hs-otg2";
|
|
reg = <0xc9040000 0x40000>; /* ahbbus 0x40000*/
|
|
interrupts = <0 30 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dr_mode = "host";
|
|
};
|
|
|
|
usb@c90c0000 {
|
|
/* usb-b */
|
|
compatible = "synopsys,designware-hs-otg2";
|
|
reg = <0xc90c0000 0x40000>; /* ahbbus 0xc0000 */
|
|
interrupts = <0 31 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dr_mode = "host";
|
|
};
|
|
|
|
eth@c9410000 {
|
|
/* ethernet */
|
|
compatible = "amlogic,meson6-dwmac";
|
|
reg = <0xc9410000 0x2000>; /* ahbbus 0x410000 */
|
|
interrupts = <0 8 1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eth-phy-rst = <&gpio3 23 0>; /* gpioh_4 phy-rst */
|
|
};
|
|
|
|
screen: fb@c8006020 {
|
|
device_type = "display";
|
|
compatible = "amlogic,aml8726-fb";
|
|
reg = <0xc8006048 12>, /* CANVAS */
|
|
<0xc1106800 1024>, /* VIU */
|
|
<0xc1107400 1024>; /* VPP */
|
|
interrupts = <0 2 1>,
|
|
<0 3 1>,
|
|
<0 12 1>,
|
|
<0 13 1>;
|
|
|
|
address = <0x7900000>; /* match memreserve */
|
|
width = <720>;
|
|
height = <480>;
|
|
depth = <24>;
|
|
linebytes = <2160>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
sys_led {
|
|
gpios = <&gpioao 13>; /* gpioao_13 sys_led */
|
|
label = "sys_led";
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
stdin = "uart0";
|
|
stdout = "uart0";
|
|
};
|
|
};
|
|
|
|
&clk81 {
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
&uart_AO {
|
|
status = "okay";
|
|
current-speed = <115200>;
|
|
};
|
|
|
|
&uart_A {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart_B {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart_C {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_A {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_B {
|
|
status = "okay";
|
|
};
|