freebsd-dev/sys/arm/at91/at91_pmcreg.h
2012-08-10 04:47:20 +00:00

145 lines
6.1 KiB
C

/*-
* Copyright (c) 2005 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef ARM_AT91_AT91_PMCREG_H
#define ARM_AT91_AT91_PMCREG_H
/* Registers */
#define PMC_SCER 0x00 /* System Clock Enable Register */
#define PMC_SCDR 0x04 /* System Clock Disable Register */
#define PMC_SCSR 0x08 /* System Clock Status Register */
/* 0x0c reserved */
#define PMC_PCER 0x10 /* Peripheral Clock Enable Register */
#define PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
#define PMC_PCSR 0x18 /* Peripheral Clock Status Register */
#define CKGR_UCKR 0x1c /* UTMI Clock Configuration Register */
#define CKGR_MOR 0x20 /* Main Oscillator Register */
#define CKGR_MCFR 0x24 /* Main Clock Frequency Register */
#define CKGR_PLLAR 0x28 /* PLL A Register */
#define CKGR_PLLBR 0x2c /* PLL B Register */
#define PMC_MCKR 0x30 /* Master Clock Register */
/* 0x34 reserved */
#define PMC_USB 0x38 /* USB Clock Register */
/* 0x3c reserved */
#define PMC_PCK0 0x40 /* Programmable Clock 0 Register */
#define PMC_PCK1 0x44 /* Programmable Clock 1 Register */
#define PMC_PCK2 0x48 /* Programmable Clock 2 Register */
#define PMC_PCK3 0x4c /* Programmable Clock 3 Register */
/* 0x50 reserved */
/* 0x54 reserved */
/* 0x58 reserved */
/* 0x5c reserved */
#define PMC_IER 0x60 /* Interrupt Enable Register */
#define PMC_IDR 0x64 /* Interrupt Disable Register */
#define PMC_SR 0x68 /* Status Register */
#define PMC_IMR 0x6c /* Interrupt Mask Register */
/* 0x70 reserved */
/* 0x74 reserved */
/* 0x78 reserved */
/* 0x7c reserved */
#define PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */
/* PMC System Clock Enable Register */
/* PMC System Clock Disable Register */
/* PMC System Clock StatusRegister */
#define PMC_SCER_PCK (1UL << 0) /* PCK: Processor Clock Enable */
#define PMC_SCER_UDP (1UL << 1) /* UDP: USB Device Port Clock Enable */
#define PMC_SCER_MCKUDP (1UL << 2) /* MCKUDP: Master disable susp/res */
#define PMC_SCER_UHP (1UL << 4) /* UHP: USB Host Port Clock Enable */
#define PMC_SCER_PCK0 (1UL << 8) /* PCK0: Programmable Clock out en */
#define PMC_SCER_PCK1 (1UL << 9) /* PCK1: Programmable Clock out en */
#define PMC_SCER_PCK2 (1UL << 10) /* PCK2: Programmable Clock out en */
#define PMC_SCER_PCK3 (1UL << 11) /* PCK3: Programmable Clock out en */
#define PMC_SCER_UHP_SAM9 (1UL << 6) /* UHP: USB Host Port Clock Enable */
#define PMC_SCER_UDP_SAM9 (1UL << 7) /* UDP: USB Device Port Clock Enable */
/* PMC Peripheral Clock Enable Register */
/* PMC Peripheral Clock Disable Register */
/* PMC Peripheral Clock Status Register */
/* Each bit here is 1 << peripheral number to enable/disable/status */
/* PMC UTMI Clock Configuration Register */
#define CKGR_UCKR_BIASEN (1UL << 24)
#define CKGR_UCKR_UPLLEN (1UL << 16)
/* PMC Clock Generator Main Oscillator Register */
#define CKGR_MOR_MOSCEN (1UL << 0) /* MOSCEN: Main Oscillator Enable */
#define CKGR_MOR_OSCBYPASS (1UL << 1) /* Oscillator Bypass */
#define CKGR_MOR_OSCOUNT(x) (x << 8) /* Main Oscillator Start-up Time */
/* PMC Clock Generator Main Clock Frequency Register */
#define CKGR_MCFR_MAINRDY (1UL << 16) /* Main Clock Ready */
#define CKGR_MCFR_MAINF_MASK 0xfffful /* Main Clock Frequency */
/* PMC Clock Generator Master Clock Register */
#define PMC_MCKR_PDIV (1 << 12) /* SAM9G20 Only */
#define PMC_MCKR_PLLADIV2 (1 << 12) /* SAM9G45 Only */
#define PMC_MCKR_CSS_MASK (3 << 0)
#define PMC_MCKR_MDIV_MASK (3 << 8)
#define PMC_MCKR_PRES_MASK (7 << 2)
/* PMC USB Clock Register */
#define PMC_USB_USBDIV(n) (((n) & 0x0F) << 8)
#define PMC_USB_USBS (1 << 0)
/* PMC Interrupt Enable Register */
/* PMC Interrupt Disable Register */
/* PMC Status Register */
/* PMC Interrupt Mask Register */
#define PMC_IER_MOSCS (1UL << 0) /* Main Oscillator Status */
#define PMC_IER_LOCKA (1UL << 1) /* PLL A Locked */
#define PMC_IER_LOCKB (1UL << 2) /* PLL B Locked */
#define PMC_IER_MCKRDY (1UL << 3) /* Master Clock Status */
#define PMC_IER_LOCKU (1UL << 6) /* UPLL Locked */
#define PMC_IER_PCK0RDY (1UL << 8) /* Programmable Clock 0 Ready */
#define PMC_IER_PCK1RDY (1UL << 9) /* Programmable Clock 1 Ready */
#define PMC_IER_PCK2RDY (1UL << 10) /* Programmable Clock 2 Ready */
#define PMC_IER_PCK3RDY (1UL << 11) /* Programmable Clock 3 Ready */
/*
* PLL input frequency spec sheet says it must be between 1MHz and 32MHz,
* but it works down as low as 100kHz, a frequency necessary for some
* output frequencies to work.
*/
#define PMC_PLL_MIN_IN_FREQ 100000
#define PMC_PLL_MAX_IN_FREQ 32000000
/*
* PLL Max output frequency is 240MHz. The errata says 180MHz is the max
* for some revisions of this part. Be more permissive and optimistic.
*/
#define PMC_PLL_MAX_OUT_FREQ 240000000
#define PMC_PLL_MULT_MIN 2
#define PMC_PLL_MULT_MAX 2048
#define PMC_PLL_SHIFT_TOL 5 /* Allow errors 1 part in 32 */
#define PMC_PLL_FAST_THRESH 155000000
#endif /* ARM_AT91_AT91_PMCREG_H */