freebsd-dev/sys/i386/xen/exception.s
2008-10-23 07:20:43 +00:00

499 lines
14 KiB
ArmAsm

/*-
* Copyright (c) 1989, 1990 William F. Jolitz.
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_apic.h"
#include "opt_npx.h"
#include <machine/asmacros.h>
#include <machine/psl.h>
#include <machine/trap.h>
#include "assym.s"
#define SEL_RPL_MASK 0x0002
#define __HYPERVISOR_iret 23
/* Offsets into shared_info_t. */
#define evtchn_upcall_pending /* 0 */
#define evtchn_upcall_mask 1
#define sizeof_vcpu_shift 6
#ifdef SMP
#define GET_VCPU_INFO(reg) movl PCPU(CPUID),reg ; \
shl $sizeof_vcpu_shift,reg ; \
addl HYPERVISOR_shared_info,reg
#else
#define GET_VCPU_INFO(reg) movl HYPERVISOR_shared_info,reg
#endif
#define __DISABLE_INTERRUPTS(reg) movb $1,evtchn_upcall_mask(reg)
#define __ENABLE_INTERRUPTS(reg) movb $0,evtchn_upcall_mask(reg)
#define DISABLE_INTERRUPTS(reg) GET_VCPU_INFO(reg) ; \
__DISABLE_INTERRUPTS(reg)
#define ENABLE_INTERRUPTS(reg) GET_VCPU_INFO(reg) ; \
__ENABLE_INTERRUPTS(reg)
#define __TEST_PENDING(reg) testb $0xFF,evtchn_upcall_pending(reg)
#define POPA \
popl %edi; \
popl %esi; \
popl %ebp; \
popl %ebx; \
popl %ebx; \
popl %edx; \
popl %ecx; \
popl %eax;
.text
/*****************************************************************************/
/* Trap handling */
/*****************************************************************************/
/*
* Trap and fault vector routines.
*
* Most traps are 'trap gates', SDT_SYS386TGT. A trap gate pushes state on
* the stack that mostly looks like an interrupt, but does not disable
* interrupts. A few of the traps we are use are interrupt gates,
* SDT_SYS386IGT, which are nearly the same thing except interrupts are
* disabled on entry.
*
* The cpu will push a certain amount of state onto the kernel stack for
* the current process. The amount of state depends on the type of trap
* and whether the trap crossed rings or not. See i386/include/frame.h.
* At the very least the current EFLAGS (status register, which includes
* the interrupt disable state prior to the trap), the code segment register,
* and the return instruction pointer are pushed by the cpu. The cpu
* will also push an 'error' code for certain traps. We push a dummy
* error code for those traps where the cpu doesn't in order to maintain
* a consistent frame. We also push a contrived 'trap number'.
*
* The cpu does not push the general registers, we must do that, and we
* must restore them prior to calling 'iret'. The cpu adjusts the %cs and
* %ss segment registers, but does not mess with %ds, %es, or %fs. Thus we
* must load them with appropriate values for supervisor mode operation.
*/
MCOUNT_LABEL(user)
MCOUNT_LABEL(btrap)
#define TRAP(a) pushl $(a) ; jmp alltraps
IDTVEC(div)
pushl $0; TRAP(T_DIVIDE)
IDTVEC(dbg)
pushl $0; TRAP(T_TRCTRAP)
IDTVEC(nmi)
pushl $0; TRAP(T_NMI)
IDTVEC(bpt)
pushl $0; TRAP(T_BPTFLT)
IDTVEC(ofl)
pushl $0; TRAP(T_OFLOW)
IDTVEC(bnd)
pushl $0; TRAP(T_BOUND)
IDTVEC(ill)
pushl $0; TRAP(T_PRIVINFLT)
IDTVEC(dna)
pushl $0; TRAP(T_DNA)
IDTVEC(fpusegm)
pushl $0; TRAP(T_FPOPFLT)
IDTVEC(tss)
TRAP(T_TSSFLT)
IDTVEC(missing)
TRAP(T_SEGNPFLT)
IDTVEC(stk)
TRAP(T_STKFLT)
IDTVEC(prot)
TRAP(T_PROTFLT)
IDTVEC(page)
TRAP(T_PAGEFLT)
IDTVEC(mchk)
pushl $0; TRAP(T_MCHK)
IDTVEC(rsvd)
pushl $0; TRAP(T_RESERVED)
IDTVEC(fpu)
pushl $0; TRAP(T_ARITHTRAP)
IDTVEC(align)
TRAP(T_ALIGNFLT)
IDTVEC(xmm)
pushl $0; TRAP(T_XMMFLT)
IDTVEC(hypervisor_callback)
pushl $0;
pushl $0;
pushal
pushl %ds
pushl %es
pushl %fs
upcall_with_regs_pushed:
SET_KERNEL_SREGS
FAKE_MCOUNT(TF_EIP(%esp))
call_evtchn_upcall:
movl TF_EIP(%esp),%eax
cmpl $scrit,%eax
jb 10f
cmpl $ecrit,%eax
jb critical_region_fixup
10: pushl %esp
call evtchn_do_upcall
addl $4,%esp
/*
* Return via doreti to handle ASTs.
*/
MEXITCOUNT
jmp doreti
hypervisor_callback_pending:
DISABLE_INTERRUPTS(%esi) /* cli */
jmp 10b
/*
* alltraps entry point. Interrupts are enabled if this was a trap
* gate (TGT), else disabled if this was an interrupt gate (IGT).
* Note that int0x80_syscall is a trap gate. Only page faults
* use an interrupt gate.
*/
SUPERALIGN_TEXT
.globl alltraps
.type alltraps,@function
alltraps:
pushal
pushl %ds
pushl %es
pushl %fs
alltraps_with_regs_pushed:
SET_KERNEL_SREGS
FAKE_MCOUNT(TF_EIP(%esp))
calltrap:
push %esp
call trap
add $4, %esp
/*
* Return via doreti to handle ASTs.
*/
MEXITCOUNT
jmp doreti
/*
* SYSCALL CALL GATE (old entry point for a.out binaries)
*
* The intersegment call has been set up to specify one dummy parameter.
*
* This leaves a place to put eflags so that the call frame can be
* converted to a trap frame. Note that the eflags is (semi-)bogusly
* pushed into (what will be) tf_err and then copied later into the
* final spot. It has to be done this way because esp can't be just
* temporarily altered for the pushfl - an interrupt might come in
* and clobber the saved cs/eip.
*/
SUPERALIGN_TEXT
IDTVEC(lcall_syscall)
pushfl /* save eflags */
popl 8(%esp) /* shuffle into tf_eflags */
pushl $7 /* sizeof "lcall 7,0" */
subl $4,%esp /* skip over tf_trapno */
pushal
pushl %ds
pushl %es
pushl %fs
SET_KERNEL_SREGS
FAKE_MCOUNT(TF_EIP(%esp))
pushl %esp
call syscall
add $4, %esp
MEXITCOUNT
jmp doreti
/*
* Call gate entry for FreeBSD ELF and Linux/NetBSD syscall (int 0x80)
*
* Even though the name says 'int0x80', this is actually a TGT (trap gate)
* rather then an IGT (interrupt gate). Thus interrupts are enabled on
* entry just as they are for a normal syscall.
*/
SUPERALIGN_TEXT
IDTVEC(int0x80_syscall)
pushl $2 /* sizeof "int 0x80" */
pushl $0xBEEF /* for debug */
pushal
pushl %ds
pushl %es
pushl %fs
SET_KERNEL_SREGS
FAKE_MCOUNT(TF_EIP(%esp))
pushl %esp
call syscall
add $4, %esp
MEXITCOUNT
jmp doreti
ENTRY(fork_trampoline)
pushl %esp /* trapframe pointer */
pushl %ebx /* arg1 */
pushl %esi /* function */
call fork_exit
addl $12,%esp
/* cut from syscall */
/*
* Return via doreti to handle ASTs.
*/
MEXITCOUNT
jmp doreti
/*
* To efficiently implement classification of trap and interrupt handlers
* for profiling, there must be only trap handlers between the labels btrap
* and bintr, and only interrupt handlers between the labels bintr and
* eintr. This is implemented (partly) by including files that contain
* some of the handlers. Before including the files, set up a normal asm
* environment so that the included files doen't need to know that they are
* included.
*/
.data
.p2align 4
.text
SUPERALIGN_TEXT
MCOUNT_LABEL(bintr)
#ifdef DEV_ATPIC
#include <i386/isa/atpic_vector.s>
#endif
#ifdef DEV_APIC
.data
.p2align 4
.text
SUPERALIGN_TEXT
#include <i386/i386/apic_vector.s>
#endif
.data
.p2align 4
.text
SUPERALIGN_TEXT
#include <i386/i386/vm86bios.s>
.text
MCOUNT_LABEL(eintr)
/*
* void doreti(struct trapframe)
*
* Handle return from interrupts, traps and syscalls.
*/
.text
SUPERALIGN_TEXT
.type doreti,@function
doreti:
FAKE_MCOUNT($bintr) /* init "from" bintr -> doreti */
doreti_next:
#ifdef notyet
/*
* Check if ASTs can be handled now. PSL_VM must be checked first
* since segment registers only have an RPL in non-VM86 mode.
*/
testl $PSL_VM,TF_EFLAGS(%esp) /* are we in vm86 mode? */
jz doreti_notvm86
movl PCPU(CURPCB),%ecx
testl $PCB_VM86CALL,PCB_FLAGS(%ecx) /* are we in a vm86 call? */
jz doreti_ast /* can handle ASTS now if not */
jmp doreti_exit
doreti_notvm86:
#endif
testb $SEL_RPL_MASK,TF_CS(%esp) /* are we returning to user mode? */
jz doreti_exit /* can't handle ASTs now if not */
doreti_ast:
/*
* Check for ASTs atomically with returning. Disabling CPU
* interrupts provides sufficient locking even in the SMP case,
* since we will be informed of any new ASTs by an IPI.
*/
DISABLE_INTERRUPTS(%esi) /* cli */
movl PCPU(CURTHREAD),%eax
testl $TDF_ASTPENDING | TDF_NEEDRESCHED,TD_FLAGS(%eax)
je doreti_exit
ENABLE_INTERRUPTS(%esi) /* sti */
pushl %esp /* pass a pointer to the trapframe */
call ast
add $4,%esp
jmp doreti_ast
/*
* doreti_exit: pop registers, iret.
*
* The segment register pop is a special case, since it may
* fault if (for example) a sigreturn specifies bad segment
* registers. The fault is handled in trap.c.
*/
doreti_exit:
ENABLE_INTERRUPTS(%esi) # reenable event callbacks (sti)
.globl scrit
scrit:
__TEST_PENDING(%esi)
jnz hypervisor_callback_pending /* More to go */
MEXITCOUNT
.globl doreti_popl_fs
doreti_popl_fs:
popl %fs
.globl doreti_popl_es
doreti_popl_es:
popl %es
.globl doreti_popl_ds
doreti_popl_ds:
popl %ds
/*
* This is important: as nothing is atomic over here (we can get
* interrupted any time), we use the critical_region_fixup() in
* order to figure out where out stack is. Therefore, do NOT use
* 'popal' here without fixing up the table!
*/
POPA
addl $8,%esp
.globl doreti_iret
doreti_iret:
jmp hypercall_page + (__HYPERVISOR_iret * 32)
.globl ecrit
ecrit:
/*
* doreti_iret_fault and friends. Alternative return code for
* the case where we get a fault in the doreti_exit code
* above. trap() (i386/i386/trap.c) catches this specific
* case, sends the process a signal and continues in the
* corresponding place in the code below.
*/
ALIGN_TEXT
.globl doreti_iret_fault
doreti_iret_fault:
subl $8,%esp
pushal
pushl %ds
.globl doreti_popl_ds_fault
doreti_popl_ds_fault:
pushl %es
.globl doreti_popl_es_fault
doreti_popl_es_fault:
pushl %fs
.globl doreti_popl_fs_fault
doreti_popl_fs_fault:
movl $0,TF_ERR(%esp) /* XXX should be the error code */
movl $T_PROTFLT,TF_TRAPNO(%esp)
jmp alltraps_with_regs_pushed
/*
# [How we do the fixup]. We want to merge the current stack frame with the
# just-interrupted frame. How we do this depends on where in the critical
# region the interrupted handler was executing, and so how many saved
# registers are in each frame. We do this quickly using the lookup table
# 'critical_fixup_table'. For each byte offset in the critical region, it
# provides the number of bytes which have already been popped from the
# interrupted stack frame.
*/
.globl critical_region_fixup
critical_region_fixup:
addl $critical_fixup_table-scrit,%eax
movzbl (%eax),%eax # %eax contains num bytes popped
movl %esp,%esi
add %eax,%esi # %esi points at end of src region
movl %esp,%edi
add $0x40,%edi # %edi points at end of dst region
movl %eax,%ecx
shr $2,%ecx # convert bytes to words
je 16f # skip loop if nothing to copy
15: subl $4,%esi # pre-decrementing copy loop
subl $4,%edi
movl (%esi),%eax
movl %eax,(%edi)
loop 15b
16: movl %edi,%esp # final %edi is top of merged stack
jmp hypervisor_callback_pending
critical_fixup_table:
.byte 0x0,0x0,0x0 #testb $0x1,(%esi)
.byte 0x0,0x0,0x0,0x0,0x0,0x0 #jne ea
.byte 0x0,0x0 #pop %fs
.byte 0x04 #pop %es
.byte 0x08 #pop %ds
.byte 0x0c #pop %edi
.byte 0x10 #pop %esi
.byte 0x14 #pop %ebp
.byte 0x18 #pop %ebx
.byte 0x1c #pop %ebx
.byte 0x20 #pop %edx
.byte 0x24 #pop %ecx
.byte 0x28 #pop %eax
.byte 0x2c,0x2c,0x2c #add $0x8,%esp
#if 0
.byte 0x34 #iret
#endif
.byte 0x34,0x34,0x34,0x34,0x34 #HYPERVISOR_iret
/* # Hypervisor uses this for application faults while it executes.*/
ENTRY(failsafe_callback)
pushal
call xen_failsafe_handler
/*# call install_safe_pf_handler */
movl 28(%esp),%ebx
1: movl %ebx,%ds
movl 32(%esp),%ebx
2: movl %ebx,%es
movl 36(%esp),%ebx
3: movl %ebx,%fs
movl 40(%esp),%ebx
4: movl %ebx,%gs
/*# call install_normal_pf_handler */
popal
addl $12,%esp
iret