34e4a32dc0
While I'm here, don't set mii_anegticks as it's set by mii_phy_add_media().
454 lines
11 KiB
C
454 lines
11 KiB
C
/*-
|
|
* Copyright (c) 2006, Pyun YongHyeon <yongari@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Driver for the IC Plus IP1000A/IP1001 10/100/1000 PHY.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include "miidevs.h"
|
|
|
|
#include <dev/mii/ip1000phyreg.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
#include <machine/bus.h>
|
|
#include <dev/stge/if_stgereg.h>
|
|
|
|
static int ip1000phy_probe(device_t);
|
|
static int ip1000phy_attach(device_t);
|
|
|
|
struct ip1000phy_softc {
|
|
struct mii_softc mii_sc;
|
|
int model;
|
|
int revision;
|
|
};
|
|
|
|
static device_method_t ip1000phy_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, ip1000phy_probe),
|
|
DEVMETHOD(device_attach, ip1000phy_attach),
|
|
DEVMETHOD(device_detach, mii_phy_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static devclass_t ip1000phy_devclass;
|
|
static driver_t ip1000phy_driver = {
|
|
"ip1000phy",
|
|
ip1000phy_methods,
|
|
sizeof (struct mii_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(ip1000phy, miibus, ip1000phy_driver, ip1000phy_devclass, 0, 0);
|
|
|
|
static int ip1000phy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void ip1000phy_status(struct mii_softc *);
|
|
static void ip1000phy_reset(struct mii_softc *);
|
|
static int ip1000phy_mii_phy_auto(struct mii_softc *);
|
|
|
|
static const struct mii_phydesc ip1000phys[] = {
|
|
MII_PHY_DESC(ICPLUS, IP1000A),
|
|
MII_PHY_DESC(ICPLUS, IP1001),
|
|
MII_PHY_END
|
|
};
|
|
|
|
static int
|
|
ip1000phy_probe(device_t dev)
|
|
{
|
|
|
|
return (mii_phy_dev_probe(dev, ip1000phys, BUS_PROBE_DEFAULT));
|
|
}
|
|
|
|
static int
|
|
ip1000phy_attach(device_t dev)
|
|
{
|
|
struct ip1000phy_softc *isc;
|
|
struct mii_softc *sc;
|
|
struct mii_attach_args *ma;
|
|
struct mii_data *mii;
|
|
|
|
isc = device_get_softc(dev);
|
|
sc = &isc->mii_sc;
|
|
ma = device_get_ivars(dev);
|
|
sc->mii_dev = device_get_parent(dev);
|
|
mii = device_get_softc(sc->mii_dev);
|
|
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
|
|
|
|
sc->mii_inst = mii->mii_instance;
|
|
sc->mii_phy = ma->mii_phyno;
|
|
sc->mii_service = ip1000phy_service;
|
|
sc->mii_pdata = mii;
|
|
sc->mii_flags |= MIIF_NOISOLATE;
|
|
|
|
mii->mii_instance++;
|
|
|
|
isc->model = MII_MODEL(ma->mii_id2);
|
|
isc->revision = MII_REV(ma->mii_id2);
|
|
|
|
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
|
|
if (sc->mii_capabilities & BMSR_EXTSTAT)
|
|
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
|
|
device_printf(dev, " ");
|
|
|
|
ip1000phy_reset(sc);
|
|
mii_phy_add_media(sc);
|
|
printf("\n");
|
|
|
|
MIIBUS_MEDIAINIT(sc->mii_dev);
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
ip1000phy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
uint32_t gig, reg, speed;
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
/*
|
|
* If we're not polling our PHY instance, just return.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return (0);
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the media indicates a different PHY instance,
|
|
* isolate ourselves.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
|
|
reg = PHY_READ(sc, IP1000PHY_MII_BMCR);
|
|
PHY_WRITE(sc, IP1000PHY_MII_BMCR,
|
|
reg | IP1000PHY_BMCR_ISO);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* If the interface is not up, don't do anything.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0) {
|
|
break;
|
|
}
|
|
|
|
ip1000phy_reset(sc);
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_AUTO:
|
|
(void)ip1000phy_mii_phy_auto(sc);
|
|
goto done;
|
|
break;
|
|
|
|
case IFM_1000_T:
|
|
/*
|
|
* XXX
|
|
* Manual 1000baseT setting doesn't seem to work.
|
|
*/
|
|
speed = IP1000PHY_BMCR_1000;
|
|
break;
|
|
|
|
case IFM_100_TX:
|
|
speed = IP1000PHY_BMCR_100;
|
|
break;
|
|
|
|
case IFM_10_T:
|
|
speed = IP1000PHY_BMCR_10;
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (((ife->ifm_media & IFM_GMASK) & IFM_FDX) != 0) {
|
|
speed |= IP1000PHY_BMCR_FDX;
|
|
gig = IP1000PHY_1000CR_1000T_FDX;
|
|
} else
|
|
gig = IP1000PHY_1000CR_1000T;
|
|
|
|
PHY_WRITE(sc, IP1000PHY_MII_1000CR, 0);
|
|
PHY_WRITE(sc, IP1000PHY_MII_BMCR, speed);
|
|
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)
|
|
break;
|
|
|
|
PHY_WRITE(sc, IP1000PHY_MII_1000CR, gig);
|
|
PHY_WRITE(sc, IP1000PHY_MII_BMCR, speed);
|
|
|
|
/*
|
|
* When setting the link manually, one side must
|
|
* be the master and the other the slave. However
|
|
* ifmedia doesn't give us a good way to specify
|
|
* this, so we fake it by using one of the LINK
|
|
* flags. If LINK0 is set, we program the PHY to
|
|
* be a master, otherwise it's a slave.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_LINK0))
|
|
PHY_WRITE(sc, IP1000PHY_MII_1000CR, gig |
|
|
IP1000PHY_1000CR_MASTER |
|
|
IP1000PHY_1000CR_MMASTER |
|
|
IP1000PHY_1000CR_MANUAL);
|
|
else
|
|
PHY_WRITE(sc, IP1000PHY_MII_1000CR, gig |
|
|
IP1000PHY_1000CR_MASTER |
|
|
IP1000PHY_1000CR_MANUAL);
|
|
|
|
done:
|
|
break;
|
|
|
|
case MII_TICK:
|
|
/*
|
|
* If we're not currently selected, just return.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return (0);
|
|
/*
|
|
* Is the interface even up?
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Only used for autonegotiation.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
|
|
sc->mii_ticks = 0;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* check for link.
|
|
*/
|
|
reg = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
|
|
if (reg & BMSR_LINK) {
|
|
sc->mii_ticks = 0;
|
|
break;
|
|
}
|
|
|
|
/* Announce link loss right after it happens */
|
|
if (sc->mii_ticks++ == 0)
|
|
break;
|
|
|
|
/*
|
|
* Only retry autonegotiation every mii_anegticks seconds.
|
|
*/
|
|
if (sc->mii_ticks <= sc->mii_anegticks)
|
|
break;
|
|
|
|
sc->mii_ticks = 0;
|
|
ip1000phy_mii_phy_auto(sc);
|
|
break;
|
|
}
|
|
|
|
/* Update the media status. */
|
|
ip1000phy_status(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ip1000phy_status(struct mii_softc *sc)
|
|
{
|
|
struct ip1000phy_softc *isc;
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
uint32_t bmsr, bmcr, stat;
|
|
uint32_t ar, lpar;
|
|
|
|
isc = (struct ip1000phy_softc *)sc;
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
bmsr = PHY_READ(sc, IP1000PHY_MII_BMSR) |
|
|
PHY_READ(sc, IP1000PHY_MII_BMSR);
|
|
if ((bmsr & IP1000PHY_BMSR_LINK) != 0)
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
bmcr = PHY_READ(sc, IP1000PHY_MII_BMCR);
|
|
if ((bmcr & IP1000PHY_BMCR_LOOP) != 0)
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
if ((bmcr & IP1000PHY_BMCR_AUTOEN) != 0) {
|
|
if ((bmsr & IP1000PHY_BMSR_ANEGCOMP) == 0) {
|
|
/* Erg, still trying, I guess... */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (isc->model == MII_MODEL_ICPLUS_IP1001) {
|
|
stat = PHY_READ(sc, IP1000PHY_LSR);
|
|
switch (stat & IP1000PHY_LSR_SPEED_MASK) {
|
|
case IP1000PHY_LSR_SPEED_10:
|
|
mii->mii_media_active |= IFM_10_T;
|
|
break;
|
|
case IP1000PHY_LSR_SPEED_100:
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
break;
|
|
case IP1000PHY_LSR_SPEED_1000:
|
|
mii->mii_media_active |= IFM_1000_T;
|
|
break;
|
|
default:
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
if ((stat & IP1000PHY_LSR_FULL_DUPLEX) != 0)
|
|
mii->mii_media_active |= IFM_FDX;
|
|
else
|
|
mii->mii_media_active |= IFM_HDX;
|
|
} else {
|
|
stat = PHY_READ(sc, STGE_PhyCtrl);
|
|
switch (PC_LinkSpeed(stat)) {
|
|
case PC_LinkSpeed_Down:
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
case PC_LinkSpeed_10:
|
|
mii->mii_media_active |= IFM_10_T;
|
|
break;
|
|
case PC_LinkSpeed_100:
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
break;
|
|
case PC_LinkSpeed_1000:
|
|
mii->mii_media_active |= IFM_1000_T;
|
|
break;
|
|
default:
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
if ((stat & PC_PhyDuplexStatus) != 0)
|
|
mii->mii_media_active |= IFM_FDX;
|
|
else
|
|
mii->mii_media_active |= IFM_HDX;
|
|
}
|
|
|
|
ar = PHY_READ(sc, IP1000PHY_MII_ANAR);
|
|
lpar = PHY_READ(sc, IP1000PHY_MII_ANLPAR);
|
|
|
|
/*
|
|
* FLAG0 : Rx flow-control
|
|
* FLAG1 : Tx flow-control
|
|
*/
|
|
if ((ar & IP1000PHY_ANAR_PAUSE) && (lpar & IP1000PHY_ANLPAR_PAUSE))
|
|
mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1;
|
|
else if (!(ar & IP1000PHY_ANAR_PAUSE) && (ar & IP1000PHY_ANAR_APAUSE) &&
|
|
(lpar & IP1000PHY_ANLPAR_PAUSE) && (lpar & IP1000PHY_ANLPAR_APAUSE))
|
|
mii->mii_media_active |= IFM_FLAG1;
|
|
else if ((ar & IP1000PHY_ANAR_PAUSE) && (ar & IP1000PHY_ANAR_APAUSE) &&
|
|
!(lpar & IP1000PHY_ANLPAR_PAUSE) &&
|
|
(lpar & IP1000PHY_ANLPAR_APAUSE)) {
|
|
mii->mii_media_active |= IFM_FLAG0;
|
|
}
|
|
|
|
/*
|
|
* FLAG2 : local PHY resolved to MASTER
|
|
*/
|
|
if ((mii->mii_media_active & IFM_1000_T) != 0) {
|
|
stat = PHY_READ(sc, IP1000PHY_MII_1000SR);
|
|
if ((stat & IP1000PHY_1000SR_MASTER) != 0)
|
|
mii->mii_media_active |= IFM_FLAG2;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ip1000phy_mii_phy_auto(struct mii_softc *mii)
|
|
{
|
|
uint32_t reg;
|
|
|
|
PHY_WRITE(mii, IP1000PHY_MII_ANAR,
|
|
IP1000PHY_ANAR_10T | IP1000PHY_ANAR_10T_FDX |
|
|
IP1000PHY_ANAR_100TX | IP1000PHY_ANAR_100TX_FDX |
|
|
IP1000PHY_ANAR_PAUSE | IP1000PHY_ANAR_APAUSE);
|
|
reg = IP1000PHY_1000CR_1000T | IP1000PHY_1000CR_1000T_FDX;
|
|
reg |= IP1000PHY_1000CR_MASTER;
|
|
PHY_WRITE(mii, IP1000PHY_MII_1000CR, reg);
|
|
PHY_WRITE(mii, IP1000PHY_MII_BMCR, (IP1000PHY_BMCR_FDX |
|
|
IP1000PHY_BMCR_AUTOEN | IP1000PHY_BMCR_STARTNEG));
|
|
|
|
return (EJUSTRETURN);
|
|
}
|
|
|
|
static void
|
|
ip1000phy_load_dspcode(struct mii_softc *sc)
|
|
{
|
|
|
|
PHY_WRITE(sc, 31, 0x0001);
|
|
PHY_WRITE(sc, 27, 0x01e0);
|
|
PHY_WRITE(sc, 31, 0x0002);
|
|
PHY_WRITE(sc, 27, 0xeb8e);
|
|
PHY_WRITE(sc, 31, 0x0000);
|
|
PHY_WRITE(sc, 30, 0x005e);
|
|
PHY_WRITE(sc, 9, 0x0700);
|
|
|
|
DELAY(50);
|
|
}
|
|
|
|
static void
|
|
ip1000phy_reset(struct mii_softc *sc)
|
|
{
|
|
struct ip1000phy_softc *isc;
|
|
struct stge_softc *stge_sc;
|
|
struct mii_data *mii;
|
|
uint32_t reg;
|
|
|
|
isc = (struct ip1000phy_softc *)sc;
|
|
mii_phy_reset(sc);
|
|
|
|
/* clear autoneg/full-duplex as we don't want it after reset */
|
|
reg = PHY_READ(sc, IP1000PHY_MII_BMCR);
|
|
reg &= ~(IP1000PHY_BMCR_AUTOEN | IP1000PHY_BMCR_FDX);
|
|
PHY_WRITE(sc, MII_BMCR, reg);
|
|
|
|
mii = sc->mii_pdata;
|
|
/*
|
|
* XXX There should be more general way to pass PHY specific
|
|
* data via mii interface.
|
|
*/
|
|
if (isc->model == MII_MODEL_ICPLUS_IP1000A &&
|
|
strcmp(mii->mii_ifp->if_dname, "stge") == 0) {
|
|
stge_sc = mii->mii_ifp->if_softc;
|
|
if (stge_sc->sc_rev >= 0x40 && stge_sc->sc_rev <= 0x4e)
|
|
ip1000phy_load_dspcode(sc);
|
|
}
|
|
}
|