d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
34feb2d2cb
freebsd-dev/sys/dev/usb/usb_hub.c
Hans Petter Selasky 0eb8d46232 Improve USB polling mode by not locking any mutexes, asserting any 
mutexes or using any callouts when active.

Trying to lock a mutex when KDB is active or the scheduler is stopped
can result in infinite wait loops. The same goes for calling callout
related functions which in turn lock mutexes.

If the USB controller at which a USB keyboard is connected is idle
when KDB is entered, polling the USB keyboard via USB will always
succeed. Else polling may fail depending on which state the USB
subsystem and USB interrupt handler is in. This is unavoidable unless
KDB can wait for USB interrupt threads to complete before stalling the
CPU(s).

Tested by:	Bruce Evans <bde@freebsd.org>
MFC after:	4 weeks
2016-09-14 12:07:34 +00:00

2925 lines
71 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
* Copyright (c) 1998 Lennart Augustsson. All rights reserved.
* Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* USB spec: http://www.usb.org/developers/docs/usbspec.zip
*/
#ifdef USB_GLOBAL_INCLUDE_FILE
#include USB_GLOBAL_INCLUDE_FILE
#else
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#define USB_DEBUG_VAR uhub_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_request.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_hub.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_dynamic.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#endif /* USB_GLOBAL_INCLUDE_FILE */
#define UHUB_INTR_INTERVAL 250 /* ms */
enum {
UHUB_INTR_TRANSFER,
#if USB_HAVE_TT_SUPPORT
UHUB_RESET_TT_TRANSFER,
#endif
UHUB_N_TRANSFER,
};
#ifdef USB_DEBUG
static int uhub_debug = 0;
static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB");
SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RWTUN, &uhub_debug, 0,
"Debug level");
#endif
#if USB_HAVE_POWERD
static int usb_power_timeout = 30; /* seconds */
SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RWTUN,
&usb_power_timeout, 0, "USB power timeout");
#endif
#if USB_HAVE_DISABLE_ENUM
static int usb_disable_enumeration = 0;
SYSCTL_INT(_hw_usb, OID_AUTO, disable_enumeration, CTLFLAG_RWTUN,
&usb_disable_enumeration, 0, "Set to disable all USB device enumeration.");
static int usb_disable_port_power = 0;
SYSCTL_INT(_hw_usb, OID_AUTO, disable_port_power, CTLFLAG_RWTUN,
&usb_disable_port_power, 0, "Set to disable all USB port power.");
#endif
struct uhub_current_state {
uint16_t port_change;
uint16_t port_status;
};
struct uhub_softc {
struct uhub_current_state sc_st;/* current state */
#if (USB_HAVE_FIXED_PORT != 0)
struct usb_hub sc_hub;
#endif
device_t sc_dev; /* base device */
struct mtx sc_mtx; /* our mutex */
struct usb_device *sc_udev; /* USB device */
struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */
#if USB_HAVE_DISABLE_ENUM
int sc_disable_enumeration;
int sc_disable_port_power;
#endif
uint8_t sc_flags;
#define UHUB_FLAG_DID_EXPLORE 0x01
};
#define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol)
#define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB)
#define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT)
#define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT)
#define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB)
/* prototypes for type checking: */
static device_probe_t uhub_probe;
static device_attach_t uhub_attach;
static device_detach_t uhub_detach;
static device_suspend_t uhub_suspend;
static device_resume_t uhub_resume;
static bus_driver_added_t uhub_driver_added;
static bus_child_location_str_t uhub_child_location_string;
static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string;
static usb_callback_t uhub_intr_callback;
#if USB_HAVE_TT_SUPPORT
static usb_callback_t uhub_reset_tt_callback;
#endif
static void usb_dev_resume_peer(struct usb_device *udev);
static void usb_dev_suspend_peer(struct usb_device *udev);
static uint8_t usb_peer_should_wakeup(struct usb_device *udev);
static const struct usb_config uhub_config[UHUB_N_TRANSFER] = {
[UHUB_INTR_TRANSFER] = {
.type = UE_INTERRUPT,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_ANY,
.timeout = 0,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.bufsize = 0, /* use wMaxPacketSize */
.callback = &uhub_intr_callback,
.interval = UHUB_INTR_INTERVAL,
},
#if USB_HAVE_TT_SUPPORT
[UHUB_RESET_TT_TRANSFER] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control pipe */
.direction = UE_DIR_ANY,
.bufsize = sizeof(struct usb_device_request),
.callback = &uhub_reset_tt_callback,
.timeout = 1000, /* 1 second */
.usb_mode = USB_MODE_HOST,
},
#endif
};
/*
* driver instance for "hub" connected to "usb"
* and "hub" connected to "hub"
*/
static devclass_t uhub_devclass;
static device_method_t uhub_methods[] = {
DEVMETHOD(device_probe, uhub_probe),
DEVMETHOD(device_attach, uhub_attach),
DEVMETHOD(device_detach, uhub_detach),
DEVMETHOD(device_suspend, uhub_suspend),
DEVMETHOD(device_resume, uhub_resume),
DEVMETHOD(bus_child_location_str, uhub_child_location_string),
DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string),
DEVMETHOD(bus_driver_added, uhub_driver_added),
DEVMETHOD_END
};
static driver_t uhub_driver = {
.name = "uhub",
.methods = uhub_methods,
.size = sizeof(struct uhub_softc)
};
DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0);
DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0);
MODULE_VERSION(uhub, 1);
static void
uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct uhub_softc *sc = usbd_xfer_softc(xfer);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(2, "\n");
/*
* This is an indication that some port
* has changed status. Notify the bus
* event handler thread that we need
* to be explored again:
*/
usb_needs_explore(sc->sc_udev->bus, 0);
case USB_ST_SETUP:
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
break;
default: /* Error */
if (xfer->error != USB_ERR_CANCELLED) {
/*
* Do a clear-stall. The "stall_pipe" flag
* will get cleared before next callback by
* the USB stack.
*/
usbd_xfer_set_stall(xfer);
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
}
break;
}
}
/*------------------------------------------------------------------------*
* uhub_reset_tt_proc
*
* This function starts the TT reset USB request
*------------------------------------------------------------------------*/
#if USB_HAVE_TT_SUPPORT
static void
uhub_reset_tt_proc(struct usb_proc_msg *_pm)
{
struct usb_udev_msg *pm = (void *)_pm;
struct usb_device *udev = pm->udev;
struct usb_hub *hub;
struct uhub_softc *sc;
hub = udev->hub;
if (hub == NULL)
return;
sc = hub->hubsoftc;
if (sc == NULL)
return;
/* Change lock */
USB_BUS_UNLOCK(udev->bus);
USB_MTX_LOCK(&sc->sc_mtx);
/* Start transfer */
usbd_transfer_start(sc->sc_xfer[UHUB_RESET_TT_TRANSFER]);
/* Change lock */
USB_MTX_UNLOCK(&sc->sc_mtx);
USB_BUS_LOCK(udev->bus);
}
#endif
/*------------------------------------------------------------------------*
* uhub_tt_buffer_reset_async_locked
*
* This function queues a TT reset for the given USB device and endpoint.
*------------------------------------------------------------------------*/
#if USB_HAVE_TT_SUPPORT
void
uhub_tt_buffer_reset_async_locked(struct usb_device *child, struct usb_endpoint *ep)
{
struct usb_device_request req;
struct usb_device *udev;
struct usb_hub *hub;
struct usb_port *up;
uint16_t wValue;
uint8_t port;
if (child == NULL || ep == NULL)
return;
udev = child->parent_hs_hub;
port = child->hs_port_no;
if (udev == NULL)
return;
hub = udev->hub;
if ((hub == NULL) ||
(udev->speed != USB_SPEED_HIGH) ||
(child->speed != USB_SPEED_LOW &&
child->speed != USB_SPEED_FULL) ||
(child->flags.usb_mode != USB_MODE_HOST) ||
(port == 0) || (ep->edesc == NULL)) {
/* not applicable */
return;
}
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
up = hub->ports + port - 1;
if (udev->ddesc.bDeviceClass == UDCLASS_HUB &&
udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT)
port = 1;
/* if we already received a clear buffer request, reset the whole TT */
if (up->req_reset_tt.bRequest != 0) {
req.bmRequestType = UT_WRITE_CLASS_OTHER;
req.bRequest = UR_RESET_TT;
USETW(req.wValue, 0);
req.wIndex[0] = port;
req.wIndex[1] = 0;
USETW(req.wLength, 0);
} else {
wValue = (ep->edesc->bEndpointAddress & 0xF) |
((child->address & 0x7F) << 4) |
((ep->edesc->bEndpointAddress & 0x80) << 8) |
((ep->edesc->bmAttributes & 3) << 12);
req.bmRequestType = UT_WRITE_CLASS_OTHER;
req.bRequest = UR_CLEAR_TT_BUFFER;
USETW(req.wValue, wValue);
req.wIndex[0] = port;
req.wIndex[1] = 0;
USETW(req.wLength, 0);
}
up->req_reset_tt = req;
/* get reset transfer started */
usb_proc_msignal(USB_BUS_TT_PROC(udev->bus),
&hub->tt_msg[0], &hub->tt_msg[1]);
}
#endif
#if USB_HAVE_TT_SUPPORT
static void
uhub_reset_tt_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct uhub_softc *sc;
struct usb_device *udev;
struct usb_port *up;
uint8_t x;
DPRINTF("TT buffer reset\n");
sc = usbd_xfer_softc(xfer);
udev = sc->sc_udev;
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
case USB_ST_SETUP:
tr_setup:
USB_BUS_LOCK(udev->bus);
/* find first port which needs a TT reset */
for (x = 0; x != udev->hub->nports; x++) {
up = udev->hub->ports + x;
if (up->req_reset_tt.bRequest == 0)
continue;
/* copy in the transfer */
usbd_copy_in(xfer->frbuffers, 0, &up->req_reset_tt,
sizeof(up->req_reset_tt));
/* reset buffer */
memset(&up->req_reset_tt, 0, sizeof(up->req_reset_tt));
/* set length */
usbd_xfer_set_frame_len(xfer, 0, sizeof(up->req_reset_tt));
xfer->nframes = 1;
USB_BUS_UNLOCK(udev->bus);
usbd_transfer_submit(xfer);
return;
}
USB_BUS_UNLOCK(udev->bus);
break;
default:
if (error == USB_ERR_CANCELLED)
break;
DPRINTF("TT buffer reset failed (%s)\n", usbd_errstr(error));
goto tr_setup;
}
}
#endif
/*------------------------------------------------------------------------*
* uhub_count_active_host_ports
*
* This function counts the number of active ports at the given speed.
*------------------------------------------------------------------------*/
uint8_t
uhub_count_active_host_ports(struct usb_device *udev, enum usb_dev_speed speed)
{
struct uhub_softc *sc;
struct usb_device *child;
struct usb_hub *hub;
struct usb_port *up;
uint8_t retval = 0;
uint8_t x;
if (udev == NULL)
goto done;
hub = udev->hub;
if (hub == NULL)
goto done;
sc = hub->hubsoftc;
if (sc == NULL)
goto done;
for (x = 0; x != hub->nports; x++) {
up = hub->ports + x;
child = usb_bus_port_get_device(udev->bus, up);
if (child != NULL &&
child->flags.usb_mode == USB_MODE_HOST &&
child->speed == speed)
retval++;
}
done:
return (retval);
}
void
uhub_explore_handle_re_enumerate(struct usb_device *child)
{
uint8_t do_unlock;
usb_error_t err;
/* check if device should be re-enumerated */
if (child->flags.usb_mode != USB_MODE_HOST)
return;
do_unlock = usbd_enum_lock(child);
switch (child->re_enumerate_wait) {
case USB_RE_ENUM_START:
err = usbd_set_config_index(child,
USB_UNCONFIG_INDEX);
if (err != 0) {
DPRINTF("Unconfigure failed: %s: Ignored.\n",
usbd_errstr(err));
}
if (child->parent_hub == NULL) {
/* the root HUB cannot be re-enumerated */
DPRINTFN(6, "cannot reset root HUB\n");
err = 0;
} else {
err = usbd_req_re_enumerate(child, NULL);
}
if (err == 0)
err = usbd_set_config_index(child, 0);
if (err == 0) {
err = usb_probe_and_attach(child,
USB_IFACE_INDEX_ANY);
}
child->re_enumerate_wait = USB_RE_ENUM_DONE;
break;
case USB_RE_ENUM_PWR_OFF:
/* get the device unconfigured */
err = usbd_set_config_index(child,
USB_UNCONFIG_INDEX);
if (err) {
DPRINTFN(0, "Could not unconfigure "
"device (ignored)\n");
}
if (child->parent_hub == NULL) {
/* the root HUB cannot be re-enumerated */
DPRINTFN(6, "cannot set port feature\n");
err = 0;
} else {
/* clear port enable */
err = usbd_req_clear_port_feature(child->parent_hub,
NULL, child->port_no, UHF_PORT_ENABLE);
if (err) {
DPRINTFN(0, "Could not disable port "
"(ignored)\n");
}
}
child->re_enumerate_wait = USB_RE_ENUM_DONE;
break;
case USB_RE_ENUM_SET_CONFIG:
err = usbd_set_config_index(child,
child->next_config_index);
if (err != 0) {
DPRINTF("Configure failed: %s: Ignored.\n",
usbd_errstr(err));
} else {
err = usb_probe_and_attach(child,
USB_IFACE_INDEX_ANY);
}
child->re_enumerate_wait = USB_RE_ENUM_DONE;
break;
default:
child->re_enumerate_wait = USB_RE_ENUM_DONE;
break;
}
if (do_unlock)
usbd_enum_unlock(child);
}
/*------------------------------------------------------------------------*
* uhub_explore_sub - subroutine
*
* Return values:
* 0: Success
* Else: A control transaction failed
*------------------------------------------------------------------------*/
static usb_error_t
uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up)
{
struct usb_bus *bus;
struct usb_device *child;
uint8_t refcount;
usb_error_t err;
bus = sc->sc_udev->bus;
err = 0;
/* get driver added refcount from USB bus */
refcount = bus->driver_added_refcount;
/* get device assosiated with the given port */
child = usb_bus_port_get_device(bus, up);
if (child == NULL) {
/* nothing to do */
goto done;
}
uhub_explore_handle_re_enumerate(child);
/* check if probe and attach should be done */
if (child->driver_added_refcount != refcount) {
child->driver_added_refcount = refcount;
err = usb_probe_and_attach(child,
USB_IFACE_INDEX_ANY);
if (err) {
goto done;
}
}
/* start control transfer, if device mode */
if (child->flags.usb_mode == USB_MODE_DEVICE)
usbd_ctrl_transfer_setup(child);
/* if a HUB becomes present, do a recursive HUB explore */
if (child->hub)
err = (child->hub->explore) (child);
done:
return (err);
}
/*------------------------------------------------------------------------*
* uhub_read_port_status - factored out code
*------------------------------------------------------------------------*/
static usb_error_t
uhub_read_port_status(struct uhub_softc *sc, uint8_t portno)
{
struct usb_port_status ps;
usb_error_t err;
err = usbd_req_get_port_status(
sc->sc_udev, NULL, &ps, portno);
/* update status regardless of error */
sc->sc_st.port_status = UGETW(ps.wPortStatus);
sc->sc_st.port_change = UGETW(ps.wPortChange);
/* debugging print */
DPRINTFN(4, "port %d, wPortStatus=0x%04x, "
"wPortChange=0x%04x, err=%s\n",
portno, sc->sc_st.port_status,
sc->sc_st.port_change, usbd_errstr(err));
return (err);
}
/*------------------------------------------------------------------------*
* uhub_reattach_port
*
* Returns:
* 0: Success
* Else: A control transaction failed
*------------------------------------------------------------------------*/
static usb_error_t
uhub_reattach_port(struct uhub_softc *sc, uint8_t portno)
{
struct usb_device *child;
struct usb_device *udev;
enum usb_dev_speed speed;
enum usb_hc_mode mode;
usb_error_t err;
uint16_t power_mask;
uint8_t timeout;
DPRINTF("reattaching port %d\n", portno);
timeout = 0;
udev = sc->sc_udev;
child = usb_bus_port_get_device(udev->bus,
udev->hub->ports + portno - 1);
repeat:
/* first clear the port connection change bit */
err = usbd_req_clear_port_feature(udev, NULL,
portno, UHF_C_PORT_CONNECTION);
if (err)
goto error;
/* check if there is a child */
if (child != NULL) {
/*
* Free USB device and all subdevices, if any.
*/
usb_free_device(child, 0);
child = NULL;
}
/* get fresh status */
err = uhub_read_port_status(sc, portno);
if (err)
goto error;
#if USB_HAVE_DISABLE_ENUM
/* check if we should skip enumeration from this USB HUB */
if (usb_disable_enumeration != 0 ||
sc->sc_disable_enumeration != 0) {
DPRINTF("Enumeration is disabled!\n");
goto error;
}
#endif
/* check if nothing is connected to the port */
if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))
goto error;
/* check if there is no power on the port and print a warning */
switch (udev->speed) {
case USB_SPEED_HIGH:
case USB_SPEED_FULL:
case USB_SPEED_LOW:
power_mask = UPS_PORT_POWER;
break;
case USB_SPEED_SUPER:
if (udev->parent_hub == NULL)
power_mask = UPS_PORT_POWER;
else
power_mask = UPS_PORT_POWER_SS;
break;
default:
power_mask = 0;
break;
}
if (!(sc->sc_st.port_status & power_mask)) {
DPRINTF("WARNING: strange, connected port %d "
"has no power\n", portno);
}
/* check if the device is in Host Mode */
if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) {
DPRINTF("Port %d is in Host Mode\n", portno);
if (sc->sc_st.port_status & UPS_SUSPEND) {
/*
* NOTE: Should not get here in SuperSpeed
* mode, because the HUB should report this
* bit as zero.
*/
DPRINTF("Port %d was still "
"suspended, clearing.\n", portno);
err = usbd_req_clear_port_feature(udev,
NULL, portno, UHF_PORT_SUSPEND);
}
/* USB Host Mode */
/* wait for maximum device power up time */
usb_pause_mtx(NULL,
USB_MS_TO_TICKS(usb_port_powerup_delay));
/* reset port, which implies enabling it */
err = usbd_req_reset_port(udev, NULL, portno);
if (err) {
DPRINTFN(0, "port %d reset "
"failed, error=%s\n",
portno, usbd_errstr(err));
goto error;
}
/* get port status again, it might have changed during reset */
err = uhub_read_port_status(sc, portno);
if (err) {
goto error;
}
/* check if something changed during port reset */
if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) ||
(!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) {
if (timeout) {
DPRINTFN(0, "giving up port reset "
"- device vanished\n");
goto error;
}
timeout = 1;
goto repeat;
}
} else {
DPRINTF("Port %d is in Device Mode\n", portno);
}
/*
* Figure out the device speed
*/
switch (udev->speed) {
case USB_SPEED_HIGH:
if (sc->sc_st.port_status & UPS_HIGH_SPEED)
speed = USB_SPEED_HIGH;
else if (sc->sc_st.port_status & UPS_LOW_SPEED)
speed = USB_SPEED_LOW;
else
speed = USB_SPEED_FULL;
break;
case USB_SPEED_FULL:
if (sc->sc_st.port_status & UPS_LOW_SPEED)
speed = USB_SPEED_LOW;
else
speed = USB_SPEED_FULL;
break;
case USB_SPEED_LOW:
speed = USB_SPEED_LOW;
break;
case USB_SPEED_SUPER:
if (udev->parent_hub == NULL) {
/* Root HUB - special case */
switch (sc->sc_st.port_status & UPS_OTHER_SPEED) {
case 0:
speed = USB_SPEED_FULL;
break;
case UPS_LOW_SPEED:
speed = USB_SPEED_LOW;
break;
case UPS_HIGH_SPEED:
speed = USB_SPEED_HIGH;
break;
default:
speed = USB_SPEED_SUPER;
break;
}
} else {
speed = USB_SPEED_SUPER;
}
break;
default:
/* same speed like parent */
speed = udev->speed;
break;
}
if (speed == USB_SPEED_SUPER) {
err = usbd_req_set_hub_u1_timeout(udev, NULL,
portno, 128 - (2 * udev->depth));
if (err) {
DPRINTFN(0, "port %d U1 timeout "
"failed, error=%s\n",
portno, usbd_errstr(err));
}
err = usbd_req_set_hub_u2_timeout(udev, NULL,
portno, 128 - (2 * udev->depth));
if (err) {
DPRINTFN(0, "port %d U2 timeout "
"failed, error=%s\n",
portno, usbd_errstr(err));
}
}
/*
* Figure out the device mode
*
* NOTE: This part is currently FreeBSD specific.
*/
if (udev->parent_hub != NULL) {
/* inherit mode from the parent HUB */
mode = udev->parent_hub->flags.usb_mode;
} else if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)
mode = USB_MODE_DEVICE;
else
mode = USB_MODE_HOST;
/* need to create a new child */
child = usb_alloc_device(sc->sc_dev, udev->bus, udev,
udev->depth + 1, portno - 1, portno, speed, mode);
if (child == NULL) {
DPRINTFN(0, "could not allocate new device\n");
goto error;
}
return (0); /* success */
error:
if (child != NULL) {
/*
* Free USB device and all subdevices, if any.
*/
usb_free_device(child, 0);
child = NULL;
}
if (err == 0) {
if (sc->sc_st.port_status & UPS_PORT_ENABLED) {
err = usbd_req_clear_port_feature(
sc->sc_udev, NULL,
portno, UHF_PORT_ENABLE);
}
}
if (err) {
DPRINTFN(0, "device problem (%s), "
"disabling port %d\n", usbd_errstr(err), portno);
}
return (err);
}
/*------------------------------------------------------------------------*
* usb_device_20_compatible
*
* Returns:
* 0: HUB does not support suspend and resume
* Else: HUB supports suspend and resume
*------------------------------------------------------------------------*/
static uint8_t
usb_device_20_compatible(struct usb_device *udev)
{
if (udev == NULL)
return (0);
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
return (1);
default:
return (0);
}
}
/*------------------------------------------------------------------------*
* uhub_suspend_resume_port
*
* Returns:
* 0: Success
* Else: A control transaction failed
*------------------------------------------------------------------------*/
static usb_error_t
uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno)
{
struct usb_device *child;
struct usb_device *udev;
uint8_t is_suspend;
usb_error_t err;
DPRINTF("port %d\n", portno);
udev = sc->sc_udev;
child = usb_bus_port_get_device(udev->bus,
udev->hub->ports + portno - 1);
/* first clear the port suspend change bit */
if (usb_device_20_compatible(udev)) {
err = usbd_req_clear_port_feature(udev, NULL,
portno, UHF_C_PORT_SUSPEND);
} else {
err = usbd_req_clear_port_feature(udev, NULL,
portno, UHF_C_PORT_LINK_STATE);
}
if (err) {
DPRINTF("clearing suspend failed.\n");
goto done;
}
/* get fresh status */
err = uhub_read_port_status(sc, portno);
if (err) {
DPRINTF("reading port status failed.\n");
goto done;
}
/* convert current state */
if (usb_device_20_compatible(udev)) {
if (sc->sc_st.port_status & UPS_SUSPEND) {
is_suspend = 1;
} else {
is_suspend = 0;
}
} else {
switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) {
case UPS_PORT_LS_U3:
is_suspend = 1;
break;
case UPS_PORT_LS_SS_INA:
usbd_req_warm_reset_port(udev, NULL, portno);
is_suspend = 0;
break;
default:
is_suspend = 0;
break;
}
}
DPRINTF("suspended=%u\n", is_suspend);
/* do the suspend or resume */
if (child) {
/*
* This code handle two cases: 1) Host Mode - we can only
* receive resume here 2) Device Mode - we can receive
* suspend and resume here
*/
if (is_suspend == 0)
usb_dev_resume_peer(child);
else if (child->flags.usb_mode == USB_MODE_DEVICE)
usb_dev_suspend_peer(child);
}
done:
return (err);
}
/*------------------------------------------------------------------------*
* uhub_root_interrupt
*
* This function is called when a Root HUB interrupt has
* happened. "ptr" and "len" makes up the Root HUB interrupt
* packet. This function is called having the "bus_mtx" locked.
*------------------------------------------------------------------------*/
void
uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len)
{
USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
usb_needs_explore(bus, 0);
}
static uint8_t
uhub_is_too_deep(struct usb_device *udev)
{
switch (udev->speed) {
case USB_SPEED_FULL:
case USB_SPEED_LOW:
case USB_SPEED_HIGH:
if (udev->depth > USB_HUB_MAX_DEPTH)
return (1);
break;
case USB_SPEED_SUPER:
if (udev->depth > USB_SS_HUB_DEPTH_MAX)
return (1);
break;
default:
break;
}
return (0);
}
/*------------------------------------------------------------------------*
* uhub_explore
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
static usb_error_t
uhub_explore(struct usb_device *udev)
{
struct usb_hub *hub;
struct uhub_softc *sc;
struct usb_port *up;
usb_error_t err;
uint8_t portno;
uint8_t x;
uint8_t do_unlock;
hub = udev->hub;
sc = hub->hubsoftc;
DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address);
/* ignore devices that are too deep */
if (uhub_is_too_deep(udev))
return (USB_ERR_TOO_DEEP);
/* check if device is suspended */
if (udev->flags.self_suspended) {
/* need to wait until the child signals resume */
DPRINTF("Device is suspended!\n");
return (0);
}
/*
* Make sure we don't race against user-space applications
* like LibUSB:
*/
do_unlock = usbd_enum_lock(udev);
for (x = 0; x != hub->nports; x++) {
up = hub->ports + x;
portno = x + 1;
err = uhub_read_port_status(sc, portno);
if (err) {
/* most likely the HUB is gone */
break;
}
if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) {
DPRINTF("Overcurrent on port %u.\n", portno);
err = usbd_req_clear_port_feature(
udev, NULL, portno, UHF_C_PORT_OVER_CURRENT);
if (err) {
/* most likely the HUB is gone */
break;
}
}
if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) {
/*
* Fake a connect status change so that the
* status gets checked initially!
*/
sc->sc_st.port_change |=
UPS_C_CONNECT_STATUS;
}
if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) {
err = usbd_req_clear_port_feature(
udev, NULL, portno, UHF_C_PORT_ENABLE);
if (err) {
/* most likely the HUB is gone */
break;
}
if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) {
/*
* Ignore the port error if the device
* has vanished !
*/
} else if (sc->sc_st.port_status & UPS_PORT_ENABLED) {
DPRINTFN(0, "illegal enable change, "
"port %d\n", portno);
} else {
if (up->restartcnt == USB_RESTART_MAX) {
/* XXX could try another speed ? */
DPRINTFN(0, "port error, giving up "
"port %d\n", portno);
} else {
sc->sc_st.port_change |=
UPS_C_CONNECT_STATUS;
up->restartcnt++;
}
}
}
if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) {
err = uhub_reattach_port(sc, portno);
if (err) {
/* most likely the HUB is gone */
break;
}
}
if (sc->sc_st.port_change & (UPS_C_SUSPEND |
UPS_C_PORT_LINK_STATE)) {
err = uhub_suspend_resume_port(sc, portno);
if (err) {
/* most likely the HUB is gone */
break;
}
}
err = uhub_explore_sub(sc, up);
if (err) {
/* no device(s) present */
continue;
}
/* explore succeeded - reset restart counter */
up->restartcnt = 0;
}
if (do_unlock)
usbd_enum_unlock(udev);
/* initial status checked */
sc->sc_flags |= UHUB_FLAG_DID_EXPLORE;
/* return success */
return (USB_ERR_NORMAL_COMPLETION);
}
static int
uhub_probe(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
if (uaa->usb_mode != USB_MODE_HOST)
return (ENXIO);
/*
* The subclass for USB HUBs is currently ignored because it
* is 0 for some and 1 for others.
*/
if (uaa->info.bConfigIndex == 0 &&
uaa->info.bDeviceClass == UDCLASS_HUB)
return (0);
return (ENXIO);
}
/* NOTE: The information returned by this function can be wrong. */
usb_error_t
uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt)
{
struct usb_hub_descriptor hubdesc20;
struct usb_hub_ss_descriptor hubdesc30;
usb_error_t err;
uint8_t nports;
uint8_t tt;
if (udev->ddesc.bDeviceClass != UDCLASS_HUB)
return (USB_ERR_INVAL);
nports = 0;
tt = 0;
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
/* assuming that there is one port */
err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1);
if (err) {
DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
break;
}
nports = hubdesc20.bNbrPorts;
if (nports > 127)
nports = 127;
if (udev->speed == USB_SPEED_HIGH)
tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3;
break;
case USB_SPEED_SUPER:
err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1);
if (err) {
DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
break;
}
nports = hubdesc30.bNbrPorts;
if (nports > 16)
nports = 16;
break;
default:
err = USB_ERR_INVAL;
break;
}
if (pnports != NULL)
*pnports = nports;
if (ptt != NULL)
*ptt = tt;
return (err);
}
static int
uhub_attach(device_t dev)
{
struct uhub_softc *sc = device_get_softc(dev);
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct usb_device *udev = uaa->device;
struct usb_device *parent_hub = udev->parent_hub;
struct usb_hub *hub;
struct usb_hub_descriptor hubdesc20;
struct usb_hub_ss_descriptor hubdesc30;
#if USB_HAVE_DISABLE_ENUM
struct sysctl_ctx_list *sysctl_ctx;
struct sysctl_oid *sysctl_tree;
#endif
uint16_t pwrdly;
uint16_t nports;
uint8_t x;
uint8_t portno;
uint8_t removable;
uint8_t iface_index;
usb_error_t err;
sc->sc_udev = udev;
sc->sc_dev = dev;
mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF);
device_set_usb_desc(dev);
DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, "
"parent->selfpowered=%d\n",
udev->depth,
udev->flags.self_powered,
parent_hub,
parent_hub ?
parent_hub->flags.self_powered : 0);
if (uhub_is_too_deep(udev)) {
DPRINTFN(0, "HUB at depth %d, "
"exceeds maximum. HUB ignored\n", (int)udev->depth);
goto error;
}
if (!udev->flags.self_powered && parent_hub &&
!parent_hub->flags.self_powered) {
DPRINTFN(0, "Bus powered HUB connected to "
"bus powered HUB. HUB ignored\n");
goto error;
}
if (UHUB_IS_MULTI_TT(sc)) {
err = usbd_set_alt_interface_index(udev, 0, 1);
if (err) {
device_printf(dev, "MTT could not be enabled\n");
goto error;
}
device_printf(dev, "MTT enabled\n");
}
/* get HUB descriptor */
DPRINTFN(2, "Getting HUB descriptor\n");
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
/* assuming that there is one port */
err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1);
if (err) {
DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
goto error;
}
/* get number of ports */
nports = hubdesc20.bNbrPorts;
/* get power delay */
pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) +
usb_extra_power_up_time);
/* get complete HUB descriptor */
if (nports >= 8) {
/* check number of ports */
if (nports > 127) {
DPRINTFN(0, "Invalid number of USB 2.0 ports,"
"error=%s\n", usbd_errstr(err));
goto error;
}
/* get complete HUB descriptor */
err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports);
if (err) {
DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
goto error;
}
if (hubdesc20.bNbrPorts != nports) {
DPRINTFN(0, "Number of ports changed\n");
goto error;
}
}
break;
case USB_SPEED_SUPER:
if (udev->parent_hub != NULL) {
err = usbd_req_set_hub_depth(udev, NULL,
udev->depth - 1);
if (err) {
DPRINTFN(0, "Setting USB 3.0 HUB depth failed,"
"error=%s\n", usbd_errstr(err));
goto error;
}
}
err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1);
if (err) {
DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
goto error;
}
/* get number of ports */
nports = hubdesc30.bNbrPorts;
/* get power delay */
pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) +
usb_extra_power_up_time);
/* get complete HUB descriptor */
if (nports >= 8) {
/* check number of ports */
if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) {
DPRINTFN(0, "Invalid number of USB 3.0 ports,"
"error=%s\n", usbd_errstr(err));
goto error;
}
/* get complete HUB descriptor */
err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports);
if (err) {
DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
"error=%s\n", usbd_errstr(err));
goto error;
}
if (hubdesc30.bNbrPorts != nports) {
DPRINTFN(0, "Number of ports changed\n");
goto error;
}
}
break;
default:
DPRINTF("Assuming HUB has only one port\n");
/* default number of ports */
nports = 1;
/* default power delay */
pwrdly = ((10 * UHD_PWRON_FACTOR) + usb_extra_power_up_time);
break;
}
if (nports == 0) {
DPRINTFN(0, "portless HUB\n");
goto error;
}
if (nports > USB_MAX_PORTS) {
DPRINTF("Port limit exceeded\n");
goto error;
}
#if (USB_HAVE_FIXED_PORT == 0)
hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports),
M_USBDEV, M_WAITOK | M_ZERO);
if (hub == NULL)
goto error;
#else
hub = &sc->sc_hub;
#endif
udev->hub = hub;
/* initialize HUB structure */
hub->hubsoftc = sc;
hub->explore = &uhub_explore;
hub->nports = nports;
hub->hubudev = udev;
#if USB_HAVE_TT_SUPPORT
hub->tt_msg[0].hdr.pm_callback = &uhub_reset_tt_proc;
hub->tt_msg[0].udev = udev;
hub->tt_msg[1].hdr.pm_callback = &uhub_reset_tt_proc;
hub->tt_msg[1].udev = udev;
#endif
/* if self powered hub, give ports maximum current */
if (udev->flags.self_powered) {
hub->portpower = USB_MAX_POWER;
} else {
hub->portpower = USB_MIN_POWER;
}
/* set up interrupt pipe */
iface_index = 0;
if (udev->parent_hub == NULL) {
/* root HUB is special */
err = 0;
} else {
/* normal HUB */
err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer,
uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx);
}
if (err) {
DPRINTFN(0, "cannot setup interrupt transfer, "
"errstr=%s\n", usbd_errstr(err));
goto error;
}
/* wait with power off for a while */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME));
#if USB_HAVE_DISABLE_ENUM
/* Add device sysctls */
sysctl_ctx = device_get_sysctl_ctx(dev);
sysctl_tree = device_get_sysctl_tree(dev);
if (sysctl_ctx != NULL && sysctl_tree != NULL) {
(void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "disable_enumeration", CTLFLAG_RWTUN,
&sc->sc_disable_enumeration, 0,
"Set to disable enumeration on this USB HUB.");
(void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
OID_AUTO, "disable_port_power", CTLFLAG_RWTUN,
&sc->sc_disable_port_power, 0,
"Set to disable USB port power on this USB HUB.");
}
#endif
/*
* To have the best chance of success we do things in the exact same
* order as Windoze98. This should not be necessary, but some
* devices do not follow the USB specs to the letter.
*
* These are the events on the bus when a hub is attached:
* Get device and config descriptors (see attach code)
* Get hub descriptor (see above)
* For all ports
* turn on power
* wait for power to become stable
* (all below happens in explore code)
* For all ports
* clear C_PORT_CONNECTION
* For all ports
* get port status
* if device connected
* wait 100 ms
* turn on reset
* wait
* clear C_PORT_RESET
* get port status
* proceed with device attachment
*/
/* XXX should check for none, individual, or ganged power? */
removable = 0;
for (x = 0; x != nports; x++) {
/* set up data structures */
struct usb_port *up = hub->ports + x;
up->device_index = 0;
up->restartcnt = 0;
portno = x + 1;
/* check if port is removable */
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
if (!UHD_NOT_REMOV(&hubdesc20, portno))
removable++;
break;
case USB_SPEED_SUPER:
if (!UHD_NOT_REMOV(&hubdesc30, portno))
removable++;
break;
default:
DPRINTF("Assuming removable port\n");
removable++;
break;
}
if (err == 0) {
#if USB_HAVE_DISABLE_ENUM
/* check if we should disable USB port power or not */
if (usb_disable_port_power != 0 ||
sc->sc_disable_port_power != 0) {
/* turn the power off */
DPRINTFN(2, "Turning port %d power off\n", portno);
err = usbd_req_clear_port_feature(udev, NULL,
portno, UHF_PORT_POWER);
} else {
#endif
/* turn the power on */
DPRINTFN(2, "Turning port %d power on\n", portno);
err = usbd_req_set_port_feature(udev, NULL,
portno, UHF_PORT_POWER);
#if USB_HAVE_DISABLE_ENUM
}
#endif
}
if (err != 0) {
DPRINTFN(0, "port %d power on or off failed, %s\n",
portno, usbd_errstr(err));
}
DPRINTF("turn on port %d power\n",
portno);
/* wait for stable power */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly));
}
device_printf(dev, "%d port%s with %d "
"removable, %s powered\n", nports, (nports != 1) ? "s" : "",
removable, udev->flags.self_powered ? "self" : "bus");
/* Start the interrupt endpoint, if any */
USB_MTX_LOCK(&sc->sc_mtx);
usbd_transfer_start(sc->sc_xfer[UHUB_INTR_TRANSFER]);
USB_MTX_UNLOCK(&sc->sc_mtx);
/* Enable automatic power save on all USB HUBs */
usbd_set_power_mode(udev, USB_POWER_MODE_SAVE);
return (0);
error:
usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER);
#if (USB_HAVE_FIXED_PORT == 0)
free(udev->hub, M_USBDEV);
#endif
udev->hub = NULL;
mtx_destroy(&sc->sc_mtx);
return (ENXIO);
}
/*
* Called from process context when the hub is gone.
* Detach all devices on active ports.
*/
static int
uhub_detach(device_t dev)
{
struct uhub_softc *sc = device_get_softc(dev);
struct usb_hub *hub = sc->sc_udev->hub;
struct usb_bus *bus = sc->sc_udev->bus;
struct usb_device *child;
uint8_t x;
if (hub == NULL) /* must be partially working */
return (0);
/* Make sure interrupt transfer is gone. */
usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER);
/* Detach all ports */
for (x = 0; x != hub->nports; x++) {
child = usb_bus_port_get_device(bus, hub->ports + x);
if (child == NULL) {
continue;
}
/*
* Free USB device and all subdevices, if any.
*/
usb_free_device(child, 0);
}
#if USB_HAVE_TT_SUPPORT
/* Make sure our TT messages are not queued anywhere */
USB_BUS_LOCK(bus);
usb_proc_mwait(USB_BUS_TT_PROC(bus),
&hub->tt_msg[0], &hub->tt_msg[1]);
USB_BUS_UNLOCK(bus);
#endif
#if (USB_HAVE_FIXED_PORT == 0)
free(hub, M_USBDEV);
#endif
sc->sc_udev->hub = NULL;
mtx_destroy(&sc->sc_mtx);
return (0);
}
static int
uhub_suspend(device_t dev)
{
DPRINTF("\n");
/* Sub-devices are not suspended here! */
return (0);
}
static int
uhub_resume(device_t dev)
{
DPRINTF("\n");
/* Sub-devices are not resumed here! */
return (0);
}
static void
uhub_driver_added(device_t dev, driver_t *driver)
{
usb_needs_explore_all();
}
struct hub_result {
struct usb_device *udev;
uint8_t portno;
uint8_t iface_index;
};
static void
uhub_find_iface_index(struct usb_hub *hub, device_t child,
struct hub_result *res)
{
struct usb_interface *iface;
struct usb_device *udev;
uint8_t nports;
uint8_t x;
uint8_t i;
nports = hub->nports;
for (x = 0; x != nports; x++) {
udev = usb_bus_port_get_device(hub->hubudev->bus,
hub->ports + x);
if (!udev) {
continue;
}
for (i = 0; i != USB_IFACE_MAX; i++) {
iface = usbd_get_iface(udev, i);
if (iface &&
(iface->subdev == child)) {
res->iface_index = i;
res->udev = udev;
res->portno = x + 1;
return;
}
}
}
res->iface_index = 0;
res->udev = NULL;
res->portno = 0;
}
static int
uhub_child_location_string(device_t parent, device_t child,
char *buf, size_t buflen)
{
struct uhub_softc *sc;
struct usb_hub *hub;
struct hub_result res;
if (!device_is_attached(parent)) {
if (buflen)
buf[0] = 0;
return (0);
}
sc = device_get_softc(parent);
hub = sc->sc_udev->hub;
mtx_lock(&Giant);
uhub_find_iface_index(hub, child, &res);
if (!res.udev) {
DPRINTF("device not on hub\n");
if (buflen) {
buf[0] = '\0';
}
goto done;
}
snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u"
" interface=%u"
#if USB_HAVE_UGEN
" ugen=%s"
#endif
, device_get_unit(res.udev->bus->bdev)
, (res.udev->parent_hub != NULL) ?
res.udev->parent_hub->device_index : 0
, res.portno, res.udev->device_index, res.iface_index
#if USB_HAVE_UGEN
, res.udev->ugen_name
#endif
);
done:
mtx_unlock(&Giant);
return (0);
}
static int
uhub_child_pnpinfo_string(device_t parent, device_t child,
char *buf, size_t buflen)
{
struct uhub_softc *sc;
struct usb_hub *hub;
struct usb_interface *iface;
struct hub_result res;
if (!device_is_attached(parent)) {
if (buflen)
buf[0] = 0;
return (0);
}
sc = device_get_softc(parent);
hub = sc->sc_udev->hub;
mtx_lock(&Giant);
uhub_find_iface_index(hub, child, &res);
if (!res.udev) {
DPRINTF("device not on hub\n");
if (buflen) {
buf[0] = '\0';
}
goto done;
}
iface = usbd_get_iface(res.udev, res.iface_index);
if (iface && iface->idesc) {
snprintf(buf, buflen, "vendor=0x%04x product=0x%04x "
"devclass=0x%02x devsubclass=0x%02x "
"devproto=0x%02x "
"sernum=\"%s\" "
"release=0x%04x "
"mode=%s "
"intclass=0x%02x intsubclass=0x%02x "
"intprotocol=0x%02x" "%s%s",
UGETW(res.udev->ddesc.idVendor),
UGETW(res.udev->ddesc.idProduct),
res.udev->ddesc.bDeviceClass,
res.udev->ddesc.bDeviceSubClass,
res.udev->ddesc.bDeviceProtocol,
usb_get_serial(res.udev),
UGETW(res.udev->ddesc.bcdDevice),
(res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device",
iface->idesc->bInterfaceClass,
iface->idesc->bInterfaceSubClass,
iface->idesc->bInterfaceProtocol,
iface->pnpinfo ? " " : "",
iface->pnpinfo ? iface->pnpinfo : "");
} else {
if (buflen) {
buf[0] = '\0';
}
goto done;
}
done:
mtx_unlock(&Giant);
return (0);
}
/*
* The USB Transaction Translator:
* ===============================
*
* When doing LOW- and FULL-speed USB transfers across a HIGH-speed
* USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT
* USB transfers. To utilize bandwidth dynamically the "scatter and
* gather" principle must be applied. This means that bandwidth must
* be divided into equal parts of bandwidth. With regard to USB all
* data is transferred in smaller packets with length
* "wMaxPacketSize". The problem however is that "wMaxPacketSize" is
* not a constant!
*
* The bandwidth scheduler which I have implemented will simply pack
* the USB transfers back to back until there is no more space in the
* schedule. Out of the 8 microframes which the USB 2.0 standard
* provides, only 6 are available for non-HIGH-speed devices. I have
* reserved the first 4 microframes for ISOCHRONOUS transfers. The
* last 2 microframes I have reserved for INTERRUPT transfers. Without
* this division, it is very difficult to allocate and free bandwidth
* dynamically.
*
* NOTE about the Transaction Translator in USB HUBs:
*
* USB HUBs have a very simple Transaction Translator, that will
* simply pipeline all the SPLIT transactions. That means that the
* transactions will be executed in the order they are queued!
*
*/
/*------------------------------------------------------------------------*
* usb_intr_find_best_slot
*
* Return value:
* The best Transaction Translation slot for an interrupt endpoint.
*------------------------------------------------------------------------*/
static uint8_t
usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start,
uint8_t end, uint8_t mask)
{
usb_size_t min = (usb_size_t)-1;
usb_size_t sum;
uint8_t x;
uint8_t y;
uint8_t z;
y = 0;
/* find the last slot with lesser used bandwidth */
for (x = start; x < end; x++) {
sum = 0;
/* compute sum of bandwidth */
for (z = x; z < end; z++) {
if (mask & (1U << (z - x)))
sum += ptr[z];
}
/* check if the current multi-slot is more optimal */
if (min >= sum) {
min = sum;
y = x;
}
/* check if the mask is about to be shifted out */
if (mask & (1U << (end - 1 - x)))
break;
}
return (y);
}
/*------------------------------------------------------------------------*
* usb_hs_bandwidth_adjust
*
* This function will update the bandwidth usage for the microframe
* having index "slot" by "len" bytes. "len" can be negative. If the
* "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX"
* the "slot" argument will be replaced by the slot having least used
* bandwidth. The "mask" argument is used for multi-slot allocations.
*
* Returns:
* The slot in which the bandwidth update was done: 0..7
*------------------------------------------------------------------------*/
static uint8_t
usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len,
uint8_t slot, uint8_t mask)
{
struct usb_bus *bus = udev->bus;
struct usb_hub *hub;
enum usb_dev_speed speed;
uint8_t x;
USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
speed = usbd_get_speed(udev);
switch (speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
if (speed == USB_SPEED_LOW) {
len *= 8;
}
/*
* The Host Controller Driver should have
* performed checks so that the lookup
* below does not result in a NULL pointer
* access.
*/
hub = udev->parent_hs_hub->hub;
if (slot >= USB_HS_MICRO_FRAMES_MAX) {
slot = usb_intr_find_best_slot(hub->uframe_usage,
USB_FS_ISOC_UFRAME_MAX, 6, mask);
}
for (x = slot; x < 8; x++) {
if (mask & (1U << (x - slot))) {
hub->uframe_usage[x] += len;
bus->uframe_usage[x] += len;
}
}
break;
default:
if (slot >= USB_HS_MICRO_FRAMES_MAX) {
slot = usb_intr_find_best_slot(bus->uframe_usage, 0,
USB_HS_MICRO_FRAMES_MAX, mask);
}
for (x = slot; x < 8; x++) {
if (mask & (1U << (x - slot))) {
bus->uframe_usage[x] += len;
}
}
break;
}
return (slot);
}
/*------------------------------------------------------------------------*
* usb_hs_bandwidth_alloc
*
* This function is a wrapper function for "usb_hs_bandwidth_adjust()".
*------------------------------------------------------------------------*/
void
usb_hs_bandwidth_alloc(struct usb_xfer *xfer)
{
struct usb_device *udev;
uint8_t slot;
uint8_t mask;
uint8_t speed;
udev = xfer->xroot->udev;
if (udev->flags.usb_mode != USB_MODE_HOST)
return; /* not supported */
xfer->endpoint->refcount_bw++;
if (xfer->endpoint->refcount_bw != 1)
return; /* already allocated */
speed = usbd_get_speed(udev);
switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
/* allocate a microframe slot */
mask = 0x01;
slot = usb_hs_bandwidth_adjust(udev,
xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask);
xfer->endpoint->usb_uframe = slot;
xfer->endpoint->usb_smask = mask << slot;
if ((speed != USB_SPEED_FULL) &&
(speed != USB_SPEED_LOW)) {
xfer->endpoint->usb_cmask = 0x00 ;
} else {
xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE;
}
break;
case UE_ISOCHRONOUS:
switch (usbd_xfer_get_fps_shift(xfer)) {
case 0:
mask = 0xFF;
break;
case 1:
mask = 0x55;
break;
case 2:
mask = 0x11;
break;
default:
mask = 0x01;
break;
}
/* allocate a microframe multi-slot */
slot = usb_hs_bandwidth_adjust(udev,
xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask);
xfer->endpoint->usb_uframe = slot;
xfer->endpoint->usb_cmask = 0;
xfer->endpoint->usb_smask = mask << slot;
break;
default:
xfer->endpoint->usb_uframe = 0;
xfer->endpoint->usb_cmask = 0;
xfer->endpoint->usb_smask = 0;
break;
}
DPRINTFN(11, "slot=%d, mask=0x%02x\n",
xfer->endpoint->usb_uframe,
xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe);
}
/*------------------------------------------------------------------------*
* usb_hs_bandwidth_free
*
* This function is a wrapper function for "usb_hs_bandwidth_adjust()".
*------------------------------------------------------------------------*/
void
usb_hs_bandwidth_free(struct usb_xfer *xfer)
{
struct usb_device *udev;
uint8_t slot;
uint8_t mask;
udev = xfer->xroot->udev;
if (udev->flags.usb_mode != USB_MODE_HOST)
return; /* not supported */
xfer->endpoint->refcount_bw--;
if (xfer->endpoint->refcount_bw != 0)
return; /* still allocated */
switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
case UE_INTERRUPT:
case UE_ISOCHRONOUS:
slot = xfer->endpoint->usb_uframe;
mask = xfer->endpoint->usb_smask;
/* free microframe slot(s): */
usb_hs_bandwidth_adjust(udev,
-xfer->max_frame_size, slot, mask >> slot);
DPRINTFN(11, "slot=%d, mask=0x%02x\n",
slot, mask >> slot);
xfer->endpoint->usb_uframe = 0;
xfer->endpoint->usb_cmask = 0;
xfer->endpoint->usb_smask = 0;
break;
default:
break;
}
}
/*------------------------------------------------------------------------*
* usb_isoc_time_expand
*
* This function will expand the time counter from 7-bit to 16-bit.
*
* Returns:
* 16-bit isochronous time counter.
*------------------------------------------------------------------------*/
uint16_t
usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr)
{
uint16_t rem;
USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1);
isoc_time_curr &= (USB_ISOC_TIME_MAX - 1);
if (isoc_time_curr < rem) {
/* the time counter wrapped around */
bus->isoc_time_last += USB_ISOC_TIME_MAX;
}
/* update the remainder */
bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1);
bus->isoc_time_last |= isoc_time_curr;
return (bus->isoc_time_last);
}
/*------------------------------------------------------------------------*
* usbd_fs_isoc_schedule_alloc_slot
*
* This function will allocate bandwidth for an isochronous FULL speed
* transaction in the FULL speed schedule.
*
* Returns:
* <8: Success
* Else: Error
*------------------------------------------------------------------------*/
#if USB_HAVE_TT_SUPPORT
uint8_t
usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time)
{
struct usb_xfer *xfer;
struct usb_xfer *pipe_xfer;
struct usb_bus *bus;
usb_frlength_t len;
usb_frlength_t data_len;
uint16_t delta;
uint16_t slot;
uint8_t retval;
data_len = 0;
slot = 0;
bus = isoc_xfer->xroot->bus;
TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) {
/* skip self, if any */
if (xfer == isoc_xfer)
continue;
/* check if this USB transfer is going through the same TT */
if (xfer->xroot->udev->parent_hs_hub !=
isoc_xfer->xroot->udev->parent_hs_hub) {
continue;
}
if ((isoc_xfer->xroot->udev->parent_hs_hub->
ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) &&
(xfer->xroot->udev->hs_port_no !=
isoc_xfer->xroot->udev->hs_port_no)) {
continue;
}
if (xfer->endpoint->methods != isoc_xfer->endpoint->methods)
continue;
/* check if isoc_time is part of this transfer */
delta = xfer->isoc_time_complete - isoc_time;
if (delta > 0 && delta <= xfer->nframes) {
delta = xfer->nframes - delta;
len = xfer->frlengths[delta];
len += 8;
len *= 7;
len /= 6;
data_len += len;
}
/*
* Check double buffered transfers. Only stream ID
* equal to zero is valid here!
*/
TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q[0].head,
wait_entry) {
/* skip self, if any */
if (pipe_xfer == isoc_xfer)
continue;
/* check if isoc_time is part of this transfer */
delta = pipe_xfer->isoc_time_complete - isoc_time;
if (delta > 0 && delta <= pipe_xfer->nframes) {
delta = pipe_xfer->nframes - delta;
len = pipe_xfer->frlengths[delta];
len += 8;
len *= 7;
len /= 6;
data_len += len;
}
}
}
while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) {
data_len -= USB_FS_BYTES_PER_HS_UFRAME;
slot++;
}
/* check for overflow */
if (slot >= USB_FS_ISOC_UFRAME_MAX)
return (255);
retval = slot;
delta = isoc_xfer->isoc_time_complete - isoc_time;
if (delta > 0 && delta <= isoc_xfer->nframes) {
delta = isoc_xfer->nframes - delta;
len = isoc_xfer->frlengths[delta];
len += 8;
len *= 7;
len /= 6;
data_len += len;
}
while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) {
data_len -= USB_FS_BYTES_PER_HS_UFRAME;
slot++;
}
/* check for overflow */
if (slot >= USB_FS_ISOC_UFRAME_MAX)
return (255);
return (retval);
}
#endif
/*------------------------------------------------------------------------*
* usb_bus_port_get_device
*
* This function is NULL safe.
*------------------------------------------------------------------------*/
struct usb_device *
usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up)
{
if ((bus == NULL) || (up == NULL)) {
/* be NULL safe */
return (NULL);
}
if (up->device_index == 0) {
/* nothing to do */
return (NULL);
}
return (bus->devices[up->device_index]);
}
/*------------------------------------------------------------------------*
* usb_bus_port_set_device
*
* This function is NULL safe.
*------------------------------------------------------------------------*/
void
usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up,
struct usb_device *udev, uint8_t device_index)
{
if (bus == NULL) {
/* be NULL safe */
return;
}
/*
* There is only one case where we don't
* have an USB port, and that is the Root Hub!
*/
if (up) {
if (udev) {
up->device_index = device_index;
} else {
device_index = up->device_index;
up->device_index = 0;
}
}
/*
* Make relationships to our new device
*/
if (device_index != 0) {
#if USB_HAVE_UGEN
mtx_lock(&usb_ref_lock);
#endif
bus->devices[device_index] = udev;
#if USB_HAVE_UGEN
mtx_unlock(&usb_ref_lock);
#endif
}
/*
* Debug print
*/
DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev);
}
/*------------------------------------------------------------------------*
* usb_needs_explore
*
* This functions is called when the USB event thread needs to run.
*------------------------------------------------------------------------*/
void
usb_needs_explore(struct usb_bus *bus, uint8_t do_probe)
{
uint8_t do_unlock;
DPRINTF("\n");
if (bus == NULL) {
DPRINTF("No bus pointer!\n");
return;
}
if ((bus->devices == NULL) ||
(bus->devices[USB_ROOT_HUB_ADDR] == NULL)) {
DPRINTF("No root HUB\n");
return;
}
if (mtx_owned(&bus->bus_mtx)) {
do_unlock = 0;
} else {
USB_BUS_LOCK(bus);
do_unlock = 1;
}
if (do_probe) {
bus->do_probe = 1;
}
if (usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus),
&bus->explore_msg[0], &bus->explore_msg[1])) {
/* ignore */
}
if (do_unlock) {
USB_BUS_UNLOCK(bus);
}
}
/*------------------------------------------------------------------------*
* usb_needs_explore_all
*
* This function is called whenever a new driver is loaded and will
* cause that all USB busses are re-explored.
*------------------------------------------------------------------------*/
void
usb_needs_explore_all(void)
{
struct usb_bus *bus;
devclass_t dc;
device_t dev;
int max;
DPRINTFN(3, "\n");
dc = usb_devclass_ptr;
if (dc == NULL) {
DPRINTFN(0, "no devclass\n");
return;
}
/*
* Explore all USB busses in parallel.
*/
max = devclass_get_maxunit(dc);
while (max >= 0) {
dev = devclass_get_device(dc, max);
if (dev) {
bus = device_get_softc(dev);
if (bus) {
usb_needs_explore(bus, 1);
}
}
max--;
}
}
/*------------------------------------------------------------------------*
* usb_bus_power_update
*
* This function will ensure that all USB devices on the given bus are
* properly suspended or resumed according to the device transfer
* state.
*------------------------------------------------------------------------*/
#if USB_HAVE_POWERD
void
usb_bus_power_update(struct usb_bus *bus)
{
usb_needs_explore(bus, 0 /* no probe */ );
}
#endif
/*------------------------------------------------------------------------*
* usbd_transfer_power_ref
*
* This function will modify the power save reference counts and
* wakeup the USB device associated with the given USB transfer, if
* needed.
*------------------------------------------------------------------------*/
#if USB_HAVE_POWERD
void
usbd_transfer_power_ref(struct usb_xfer *xfer, int val)
{
static const usb_power_mask_t power_mask[4] = {
[UE_CONTROL] = USB_HW_POWER_CONTROL,
[UE_BULK] = USB_HW_POWER_BULK,
[UE_INTERRUPT] = USB_HW_POWER_INTERRUPT,
[UE_ISOCHRONOUS] = USB_HW_POWER_ISOC,
};
struct usb_device *udev;
uint8_t needs_explore;
uint8_t needs_hw_power;
uint8_t xfer_type;
udev = xfer->xroot->udev;
if (udev->device_index == USB_ROOT_HUB_ADDR) {
/* no power save for root HUB */
return;
}
USB_BUS_LOCK(udev->bus);
xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE;
udev->pwr_save.last_xfer_time = ticks;
udev->pwr_save.type_refs[xfer_type] += val;
if (xfer->flags_int.control_xfr) {
udev->pwr_save.read_refs += val;
if (xfer->flags_int.usb_mode == USB_MODE_HOST) {
/*
* It is not allowed to suspend during a
* control transfer:
*/
udev->pwr_save.write_refs += val;
}
} else if (USB_GET_DATA_ISREAD(xfer)) {
udev->pwr_save.read_refs += val;
} else {
udev->pwr_save.write_refs += val;
}
if (val > 0) {
if (udev->flags.self_suspended)
needs_explore = usb_peer_should_wakeup(udev);
else
needs_explore = 0;
if (!(udev->bus->hw_power_state & power_mask[xfer_type])) {
DPRINTF("Adding type %u to power state\n", xfer_type);
udev->bus->hw_power_state |= power_mask[xfer_type];
needs_hw_power = 1;
} else {
needs_hw_power = 0;
}
} else {
needs_explore = 0;
needs_hw_power = 0;
}
USB_BUS_UNLOCK(udev->bus);
if (needs_explore) {
DPRINTF("update\n");
usb_bus_power_update(udev->bus);
} else if (needs_hw_power) {
DPRINTF("needs power\n");
if (udev->bus->methods->set_hw_power != NULL) {
(udev->bus->methods->set_hw_power) (udev->bus);
}
}
}
#endif
/*------------------------------------------------------------------------*
* usb_peer_should_wakeup
*
* This function returns non-zero if the current device should wake up.
*------------------------------------------------------------------------*/
static uint8_t
usb_peer_should_wakeup(struct usb_device *udev)
{
return (((udev->power_mode == USB_POWER_MODE_ON) &&
(udev->flags.usb_mode == USB_MODE_HOST)) ||
(udev->driver_added_refcount != udev->bus->driver_added_refcount) ||
(udev->re_enumerate_wait != USB_RE_ENUM_DONE) ||
(udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) ||
(udev->pwr_save.write_refs != 0) ||
((udev->pwr_save.read_refs != 0) &&
(udev->flags.usb_mode == USB_MODE_HOST) &&
(usb_peer_can_wakeup(udev) == 0)));
}
/*------------------------------------------------------------------------*
* usb_bus_powerd
*
* This function implements the USB power daemon and is called
* regularly from the USB explore thread.
*------------------------------------------------------------------------*/
#if USB_HAVE_POWERD
void
usb_bus_powerd(struct usb_bus *bus)
{
struct usb_device *udev;
usb_ticks_t temp;
usb_ticks_t limit;
usb_ticks_t mintime;
usb_size_t type_refs[5];
uint8_t x;
limit = usb_power_timeout;
if (limit == 0)
limit = hz;
else if (limit > 255)
limit = 255 * hz;
else
limit = limit * hz;
DPRINTF("bus=%p\n", bus);
USB_BUS_LOCK(bus);
/*
* The root HUB device is never suspended
* and we simply skip it.
*/
for (x = USB_ROOT_HUB_ADDR + 1;
x != bus->devices_max; x++) {
udev = bus->devices[x];
if (udev == NULL)
continue;
temp = ticks - udev->pwr_save.last_xfer_time;
if (usb_peer_should_wakeup(udev)) {
/* check if we are suspended */
if (udev->flags.self_suspended != 0) {
USB_BUS_UNLOCK(bus);
usb_dev_resume_peer(udev);
USB_BUS_LOCK(bus);
}
} else if ((temp >= limit) &&
(udev->flags.usb_mode == USB_MODE_HOST) &&
(udev->flags.self_suspended == 0)) {
/* try to do suspend */
USB_BUS_UNLOCK(bus);
usb_dev_suspend_peer(udev);
USB_BUS_LOCK(bus);
}
}
/* reset counters */
mintime = (usb_ticks_t)-1;
type_refs[0] = 0;
type_refs[1] = 0;
type_refs[2] = 0;
type_refs[3] = 0;
type_refs[4] = 0;
/* Re-loop all the devices to get the actual state */
for (x = USB_ROOT_HUB_ADDR + 1;
x != bus->devices_max; x++) {
udev = bus->devices[x];
if (udev == NULL)
continue;
/* we found a non-Root-Hub USB device */
type_refs[4] += 1;
/* "last_xfer_time" can be updated by a resume */
temp = ticks - udev->pwr_save.last_xfer_time;
/*
* Compute minimum time since last transfer for the complete
* bus:
*/
if (temp < mintime)
mintime = temp;
if (udev->flags.self_suspended == 0) {
type_refs[0] += udev->pwr_save.type_refs[0];
type_refs[1] += udev->pwr_save.type_refs[1];
type_refs[2] += udev->pwr_save.type_refs[2];
type_refs[3] += udev->pwr_save.type_refs[3];
}
}
if (mintime >= (usb_ticks_t)(1 * hz)) {
/* recompute power masks */
DPRINTF("Recomputing power masks\n");
bus->hw_power_state = 0;
if (type_refs[UE_CONTROL] != 0)
bus->hw_power_state |= USB_HW_POWER_CONTROL;
if (type_refs[UE_BULK] != 0)
bus->hw_power_state |= USB_HW_POWER_BULK;
if (type_refs[UE_INTERRUPT] != 0)
bus->hw_power_state |= USB_HW_POWER_INTERRUPT;
if (type_refs[UE_ISOCHRONOUS] != 0)
bus->hw_power_state |= USB_HW_POWER_ISOC;
if (type_refs[4] != 0)
bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB;
}
USB_BUS_UNLOCK(bus);
if (bus->methods->set_hw_power != NULL) {
/* always update hardware power! */
(bus->methods->set_hw_power) (bus);
}
return;
}
#endif
/*------------------------------------------------------------------------*
* usb_dev_resume_peer
*
* This function will resume an USB peer and do the required USB
* signalling to get an USB device out of the suspended state.
*------------------------------------------------------------------------*/
static void
usb_dev_resume_peer(struct usb_device *udev)
{
struct usb_bus *bus;
int err;
/* be NULL safe */
if (udev == NULL)
return;
/* check if already resumed */
if (udev->flags.self_suspended == 0)
return;
/* we need a parent HUB to do resume */
if (udev->parent_hub == NULL)
return;
DPRINTF("udev=%p\n", udev);
if ((udev->flags.usb_mode == USB_MODE_DEVICE) &&
(udev->flags.remote_wakeup == 0)) {
/*
* If the host did not set the remote wakeup feature, we can
* not wake it up either!
*/
DPRINTF("remote wakeup is not set!\n");
return;
}
/* get bus pointer */
bus = udev->bus;
/* resume parent hub first */
usb_dev_resume_peer(udev->parent_hub);
/* reduce chance of instant resume failure by waiting a little bit */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(20));
if (usb_device_20_compatible(udev)) {
/* resume current port (Valid in Host and Device Mode) */
err = usbd_req_clear_port_feature(udev->parent_hub,
NULL, udev->port_no, UHF_PORT_SUSPEND);
if (err) {
DPRINTFN(0, "Resuming port failed\n");
return;
}
} else {
/* resume current port (Valid in Host and Device Mode) */
err = usbd_req_set_port_link_state(udev->parent_hub,
NULL, udev->port_no, UPS_PORT_LS_U0);
if (err) {
DPRINTFN(0, "Resuming port failed\n");
return;
}
}
/* resume settle time */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay));
if (bus->methods->device_resume != NULL) {
/* resume USB device on the USB controller */
(bus->methods->device_resume) (udev);
}
USB_BUS_LOCK(bus);
/* set that this device is now resumed */
udev->flags.self_suspended = 0;
#if USB_HAVE_POWERD
/* make sure that we don't go into suspend right away */
udev->pwr_save.last_xfer_time = ticks;
/* make sure the needed power masks are on */
if (udev->pwr_save.type_refs[UE_CONTROL] != 0)
bus->hw_power_state |= USB_HW_POWER_CONTROL;
if (udev->pwr_save.type_refs[UE_BULK] != 0)
bus->hw_power_state |= USB_HW_POWER_BULK;
if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0)
bus->hw_power_state |= USB_HW_POWER_INTERRUPT;
if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0)
bus->hw_power_state |= USB_HW_POWER_ISOC;
#endif
USB_BUS_UNLOCK(bus);
if (bus->methods->set_hw_power != NULL) {
/* always update hardware power! */
(bus->methods->set_hw_power) (bus);
}
usbd_sr_lock(udev);
/* notify all sub-devices about resume */
err = usb_suspend_resume(udev, 0);
usbd_sr_unlock(udev);
/* check if peer has wakeup capability */
if (usb_peer_can_wakeup(udev)) {
/* clear remote wakeup */
err = usbd_req_clear_device_feature(udev,
NULL, UF_DEVICE_REMOTE_WAKEUP);
if (err) {
DPRINTFN(0, "Clearing device "
"remote wakeup failed: %s\n",
usbd_errstr(err));
}
}
}
/*------------------------------------------------------------------------*
* usb_dev_suspend_peer
*
* This function will suspend an USB peer and do the required USB
* signalling to get an USB device into the suspended state.
*------------------------------------------------------------------------*/
static void
usb_dev_suspend_peer(struct usb_device *udev)
{
struct usb_device *child;
int err;
uint8_t x;
uint8_t nports;
repeat:
/* be NULL safe */
if (udev == NULL)
return;
/* check if already suspended */
if (udev->flags.self_suspended)
return;
/* we need a parent HUB to do suspend */
if (udev->parent_hub == NULL)
return;
DPRINTF("udev=%p\n", udev);
/* check if the current device is a HUB */
if (udev->hub != NULL) {
nports = udev->hub->nports;
/* check if all devices on the HUB are suspended */
for (x = 0; x != nports; x++) {
child = usb_bus_port_get_device(udev->bus,
udev->hub->ports + x);
if (child == NULL)
continue;
if (child->flags.self_suspended)
continue;
DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1);
return;
}
}
if (usb_peer_can_wakeup(udev)) {
/*
* This request needs to be done before we set
* "udev->flags.self_suspended":
*/
/* allow device to do remote wakeup */
err = usbd_req_set_device_feature(udev,
NULL, UF_DEVICE_REMOTE_WAKEUP);
if (err) {
DPRINTFN(0, "Setting device "
"remote wakeup failed\n");
}
}
USB_BUS_LOCK(udev->bus);
/*
* Checking for suspend condition and setting suspended bit
* must be atomic!
*/
err = usb_peer_should_wakeup(udev);
if (err == 0) {
/*
* Set that this device is suspended. This variable
* must be set before calling USB controller suspend
* callbacks.
*/
udev->flags.self_suspended = 1;
}
USB_BUS_UNLOCK(udev->bus);
if (err != 0) {
if (usb_peer_can_wakeup(udev)) {
/* allow device to do remote wakeup */
err = usbd_req_clear_device_feature(udev,
NULL, UF_DEVICE_REMOTE_WAKEUP);
if (err) {
DPRINTFN(0, "Setting device "
"remote wakeup failed\n");
}
}
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
/* resume parent HUB first */
usb_dev_resume_peer(udev->parent_hub);
/* reduce chance of instant resume failure by waiting a little bit */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(20));
/* resume current port (Valid in Host and Device Mode) */
err = usbd_req_clear_port_feature(udev->parent_hub,
NULL, udev->port_no, UHF_PORT_SUSPEND);
/* resume settle time */
usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay));
}
DPRINTF("Suspend was cancelled!\n");
return;
}
usbd_sr_lock(udev);
/* notify all sub-devices about suspend */
err = usb_suspend_resume(udev, 1);
usbd_sr_unlock(udev);
if (udev->bus->methods->device_suspend != NULL) {
usb_timeout_t temp;
/* suspend device on the USB controller */
(udev->bus->methods->device_suspend) (udev);
/* do DMA delay */
temp = usbd_get_dma_delay(udev);
if (temp != 0)
usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp));
}
if (usb_device_20_compatible(udev)) {
/* suspend current port */
err = usbd_req_set_port_feature(udev->parent_hub,
NULL, udev->port_no, UHF_PORT_SUSPEND);
if (err) {
DPRINTFN(0, "Suspending port failed\n");
return;
}
} else {
/* suspend current port */
err = usbd_req_set_port_link_state(udev->parent_hub,
NULL, udev->port_no, UPS_PORT_LS_U3);
if (err) {
DPRINTFN(0, "Suspending port failed\n");
return;
}
}
udev = udev->parent_hub;
goto repeat;
}
/*------------------------------------------------------------------------*
* usbd_set_power_mode
*
* This function will set the power mode, see USB_POWER_MODE_XXX for a
* USB device.
*------------------------------------------------------------------------*/
void
usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode)
{
/* filter input argument */
if ((power_mode != USB_POWER_MODE_ON) &&
(power_mode != USB_POWER_MODE_OFF))
power_mode = USB_POWER_MODE_SAVE;
power_mode = usbd_filter_power_mode(udev, power_mode);
udev->power_mode = power_mode; /* update copy of power mode */
#if USB_HAVE_POWERD
usb_bus_power_update(udev->bus);
#else
usb_needs_explore(udev->bus, 0 /* no probe */ );
#endif
}
/*------------------------------------------------------------------------*
* usbd_filter_power_mode
*
* This function filters the power mode based on hardware requirements.
*------------------------------------------------------------------------*/
uint8_t
usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode)
{
const struct usb_bus_methods *mtod;
int8_t temp;
mtod = udev->bus->methods;
temp = -1;
if (mtod->get_power_mode != NULL)
(mtod->get_power_mode) (udev, &temp);
/* check if we should not filter */
if (temp < 0)
return (power_mode);
/* use fixed power mode given by hardware driver */
return (temp);
}
/*------------------------------------------------------------------------*
* usbd_start_re_enumerate
*
* This function starts re-enumeration of the given USB device. This
* function does not need to be called BUS-locked. This function does
* not wait until the re-enumeration is completed.
*------------------------------------------------------------------------*/
void
usbd_start_re_enumerate(struct usb_device *udev)
{
if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) {
udev->re_enumerate_wait = USB_RE_ENUM_START;
usb_needs_explore(udev->bus, 0);
}
}
/*-----------------------------------------------------------------------*
* usbd_start_set_config
*
* This function starts setting a USB configuration. This function
* does not need to be called BUS-locked. This function does not wait
* until the set USB configuratino is completed.
*------------------------------------------------------------------------*/
usb_error_t
usbd_start_set_config(struct usb_device *udev, uint8_t index)
{
if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) {
if (udev->curr_config_index == index) {
/* no change needed */
return (0);
}
udev->next_config_index = index;
udev->re_enumerate_wait = USB_RE_ENUM_SET_CONFIG;
usb_needs_explore(udev->bus, 0);
return (0);
} else if (udev->re_enumerate_wait == USB_RE_ENUM_SET_CONFIG) {
if (udev->next_config_index == index) {
/* no change needed */
return (0);
}
}
return (USB_ERR_PENDING_REQUESTS);
}
Reference in New Issue View Git Blame Copy Permalink