freebsd-dev/sys/dev/mii
Pyun YongHyeon 8fc8651306 For IP1001 PHYs, read auto-negotiation advertisement register to
get default next page configuration. While I'm here explicitly set
IP1000PHY_ANAR_CSMA bit. This bit is read-only and always set
by hardware so setting it has no effect but it would clear the
intention. With this change controllers that couldn't establish
1000baseT link should work.

PR:	kern/130846
2009-03-09 08:17:46 +00:00
..
acphy.c
acphyreg.h
amphy.c Fix a typo in a comment. 2008-01-27 01:11:57 +00:00
amphyreg.h
atphy.c Use auto-negotiation for manual media type selection. This fixes 2008-10-25 06:39:17 +00:00
atphyreg.h Add Attansic/Atheros F1 PHY driver. 2008-05-19 01:12:10 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c Restore link state handling which was broken in rev 1.69. 2008-08-12 00:57:39 +00:00
brgphyreg.h Add support for the BCM5906[M] adapters. These adapters only support 2008-04-29 19:47:13 +00:00
ciphy.c Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
ciphyreg.h
e1000phy.c Some 88E1149 PHY's page select is initialized to point to other 2008-10-17 05:26:51 +00:00
e1000phyreg.h Add 88E1116/88E1116R PHY support code that takes the PHY out of 2007-10-29 05:50:22 +00:00
exphy.c
gentbi.c - Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4) 2007-10-29 21:11:55 +00:00
icsphy.c
icsphyreg.h
inphy.c
inphyreg.h
ip1000phy.c For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
ip1000phyreg.h For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
jmphy.c Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
jmphyreg.h Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
lxtphy.c Add support for the Apple Big Mac (BMAC) Ethernet controller, 2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c
mii.c Revert bogusly committed file. 2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
miivar.h
mlphy.c Move the code that looks for the companion phy to a subroutine to make 2008-08-23 15:50:18 +00:00
nsgphy.c
nsgphyreg.h
nsphy.c - Fix a typo in a comment. 2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
nsphyterreg.h Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c Fix a copy/paste error 2008-08-06 07:52:59 +00:00
rgephyreg.h Add RTL8211C(L) support. 2008-07-02 08:10:18 +00:00
rlphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c This is a rewritten driver for the SMSC LAN91C111. It's based in part on the 2008-06-06 05:00:49 +00:00
tdkphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
tdkphyreg.h
tlphy.c It turns out that my analysis of the error handling here was wrong. 2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc 2008-11-28 23:44:13 +00:00
truephyreg.h Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:30:44 +00:00
ukphy_subr.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
ukphy.c
xmphy.c
xmphyreg.h