1a43cff92a
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple programs or threads to bind to the same port and incoming connections will be load balanced using a hash function. Most of the code was copied from a similar patch for DragonflyBSD. However, in DragonflyBSD, load balancing is a global on/off setting and can not be set per socket. This patch allows for simultaneous use of both the current SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system. Required changes to structures: Globally change so_options from 16 to 32 bit value to allow for more options. Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets. Limitations: As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or threads sharing the same socket). This is a substantially different contribution as compared to its original incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@ for the substantive feedback that is included in this commit. Submitted by: Johannes Lundberg <johalun0@gmail.com> Obtained from: DragonflyBSD Relnotes: Yes Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D11003
1244 lines
35 KiB
C
1244 lines
35 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the project nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1982, 1986, 1991, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_inet.h"
|
|
#include "opt_inet6.h"
|
|
#include "opt_mpath.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/priv.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/socketvar.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/time.h>
|
|
#include <sys/jail.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/rmlock.h>
|
|
#include <sys/sx.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/route.h>
|
|
#include <net/if_llatbl.h>
|
|
#ifdef RADIX_MPATH
|
|
#include <net/radix_mpath.h>
|
|
#endif
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/in_pcb.h>
|
|
#include <netinet/ip_var.h>
|
|
#include <netinet/udp.h>
|
|
#include <netinet/udp_var.h>
|
|
|
|
#include <netinet6/in6_var.h>
|
|
#include <netinet/ip6.h>
|
|
#include <netinet6/in6_fib.h>
|
|
#include <netinet6/in6_pcb.h>
|
|
#include <netinet6/ip6_var.h>
|
|
#include <netinet6/scope6_var.h>
|
|
#include <netinet6/nd6.h>
|
|
|
|
static struct mtx addrsel_lock;
|
|
#define ADDRSEL_LOCK_INIT() mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
|
|
#define ADDRSEL_LOCK() mtx_lock(&addrsel_lock)
|
|
#define ADDRSEL_UNLOCK() mtx_unlock(&addrsel_lock)
|
|
#define ADDRSEL_LOCK_ASSERT() mtx_assert(&addrsel_lock, MA_OWNED)
|
|
|
|
static struct sx addrsel_sxlock;
|
|
#define ADDRSEL_SXLOCK_INIT() sx_init(&addrsel_sxlock, "addrsel_sxlock")
|
|
#define ADDRSEL_SLOCK() sx_slock(&addrsel_sxlock)
|
|
#define ADDRSEL_SUNLOCK() sx_sunlock(&addrsel_sxlock)
|
|
#define ADDRSEL_XLOCK() sx_xlock(&addrsel_sxlock)
|
|
#define ADDRSEL_XUNLOCK() sx_xunlock(&addrsel_sxlock)
|
|
|
|
#define ADDR_LABEL_NOTAPP (-1)
|
|
static VNET_DEFINE(struct in6_addrpolicy, defaultaddrpolicy);
|
|
#define V_defaultaddrpolicy VNET(defaultaddrpolicy)
|
|
|
|
VNET_DEFINE(int, ip6_prefer_tempaddr) = 0;
|
|
|
|
static int selectroute(struct sockaddr_in6 *, struct ip6_pktopts *,
|
|
struct ip6_moptions *, struct route_in6 *, struct ifnet **,
|
|
struct rtentry **, int, u_int);
|
|
static int in6_selectif(struct sockaddr_in6 *, struct ip6_pktopts *,
|
|
struct ip6_moptions *, struct ifnet **,
|
|
struct ifnet *, u_int);
|
|
static int in6_selectsrc(uint32_t, struct sockaddr_in6 *,
|
|
struct ip6_pktopts *, struct inpcb *, struct ucred *,
|
|
struct ifnet **, struct in6_addr *);
|
|
|
|
static struct in6_addrpolicy *lookup_addrsel_policy(struct sockaddr_in6 *);
|
|
|
|
static void init_policy_queue(void);
|
|
static int add_addrsel_policyent(struct in6_addrpolicy *);
|
|
static int delete_addrsel_policyent(struct in6_addrpolicy *);
|
|
static int walk_addrsel_policy(int (*)(struct in6_addrpolicy *, void *),
|
|
void *);
|
|
static int dump_addrsel_policyent(struct in6_addrpolicy *, void *);
|
|
static struct in6_addrpolicy *match_addrsel_policy(struct sockaddr_in6 *);
|
|
|
|
/*
|
|
* Return an IPv6 address, which is the most appropriate for a given
|
|
* destination and user specified options.
|
|
* If necessary, this function lookups the routing table and returns
|
|
* an entry to the caller for later use.
|
|
*/
|
|
#define REPLACE(r) do {\
|
|
IP6STAT_INC(ip6s_sources_rule[(r)]); \
|
|
/* { \
|
|
char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
|
|
printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
|
|
} */ \
|
|
goto replace; \
|
|
} while(0)
|
|
#define NEXT(r) do {\
|
|
/* { \
|
|
char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
|
|
printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
|
|
} */ \
|
|
goto next; /* XXX: we can't use 'continue' here */ \
|
|
} while(0)
|
|
#define BREAK(r) do { \
|
|
IP6STAT_INC(ip6s_sources_rule[(r)]); \
|
|
goto out; /* XXX: we can't use 'break' here */ \
|
|
} while(0)
|
|
|
|
static int
|
|
in6_selectsrc(uint32_t fibnum, struct sockaddr_in6 *dstsock,
|
|
struct ip6_pktopts *opts, struct inpcb *inp, struct ucred *cred,
|
|
struct ifnet **ifpp, struct in6_addr *srcp)
|
|
{
|
|
struct rm_priotracker in6_ifa_tracker;
|
|
struct in6_addr dst, tmp;
|
|
struct ifnet *ifp = NULL, *oifp = NULL;
|
|
struct in6_ifaddr *ia = NULL, *ia_best = NULL;
|
|
struct in6_pktinfo *pi = NULL;
|
|
int dst_scope = -1, best_scope = -1, best_matchlen = -1;
|
|
struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
|
|
u_int32_t odstzone;
|
|
int prefer_tempaddr;
|
|
int error;
|
|
struct ip6_moptions *mopts;
|
|
|
|
KASSERT(srcp != NULL, ("%s: srcp is NULL", __func__));
|
|
|
|
dst = dstsock->sin6_addr; /* make a copy for local operation */
|
|
if (ifpp) {
|
|
/*
|
|
* Save a possibly passed in ifp for in6_selectsrc. Only
|
|
* neighbor discovery code should use this feature, where
|
|
* we may know the interface but not the FIB number holding
|
|
* the connected subnet in case someone deleted it from the
|
|
* default FIB and we need to check the interface.
|
|
*/
|
|
if (*ifpp != NULL)
|
|
oifp = *ifpp;
|
|
*ifpp = NULL;
|
|
}
|
|
|
|
if (inp != NULL) {
|
|
INP_LOCK_ASSERT(inp);
|
|
mopts = inp->in6p_moptions;
|
|
} else {
|
|
mopts = NULL;
|
|
}
|
|
|
|
/*
|
|
* If the source address is explicitly specified by the caller,
|
|
* check if the requested source address is indeed a unicast address
|
|
* assigned to the node, and can be used as the packet's source
|
|
* address. If everything is okay, use the address as source.
|
|
*/
|
|
if (opts && (pi = opts->ip6po_pktinfo) &&
|
|
!IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
|
|
/* get the outgoing interface */
|
|
if ((error = in6_selectif(dstsock, opts, mopts, &ifp, oifp,
|
|
fibnum))
|
|
!= 0)
|
|
return (error);
|
|
|
|
/*
|
|
* determine the appropriate zone id of the source based on
|
|
* the zone of the destination and the outgoing interface.
|
|
* If the specified address is ambiguous wrt the scope zone,
|
|
* the interface must be specified; otherwise, ifa_ifwithaddr()
|
|
* will fail matching the address.
|
|
*/
|
|
tmp = pi->ipi6_addr;
|
|
if (ifp) {
|
|
error = in6_setscope(&tmp, ifp, &odstzone);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
if (cred != NULL && (error = prison_local_ip6(cred,
|
|
&tmp, (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0)) != 0)
|
|
return (error);
|
|
|
|
/*
|
|
* If IPV6_BINDANY socket option is set, we allow to specify
|
|
* non local addresses as source address in IPV6_PKTINFO
|
|
* ancillary data.
|
|
*/
|
|
if ((inp->inp_flags & INP_BINDANY) == 0) {
|
|
ia = in6ifa_ifwithaddr(&tmp, 0 /* XXX */);
|
|
if (ia == NULL || (ia->ia6_flags & (IN6_IFF_ANYCAST |
|
|
IN6_IFF_NOTREADY))) {
|
|
if (ia != NULL)
|
|
ifa_free(&ia->ia_ifa);
|
|
return (EADDRNOTAVAIL);
|
|
}
|
|
bcopy(&ia->ia_addr.sin6_addr, srcp, sizeof(*srcp));
|
|
ifa_free(&ia->ia_ifa);
|
|
} else
|
|
bcopy(&tmp, srcp, sizeof(*srcp));
|
|
pi->ipi6_addr = tmp; /* XXX: this overrides pi */
|
|
if (ifpp)
|
|
*ifpp = ifp;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Otherwise, if the socket has already bound the source, just use it.
|
|
*/
|
|
if (inp != NULL && !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
|
|
if (cred != NULL &&
|
|
(error = prison_local_ip6(cred, &inp->in6p_laddr,
|
|
((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
|
|
return (error);
|
|
bcopy(&inp->in6p_laddr, srcp, sizeof(*srcp));
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Bypass source address selection and use the primary jail IP
|
|
* if requested.
|
|
*/
|
|
if (cred != NULL && !prison_saddrsel_ip6(cred, srcp))
|
|
return (0);
|
|
|
|
/*
|
|
* If the address is not specified, choose the best one based on
|
|
* the outgoing interface and the destination address.
|
|
*/
|
|
/* get the outgoing interface */
|
|
if ((error = in6_selectif(dstsock, opts, mopts, &ifp, oifp,
|
|
(inp != NULL) ? inp->inp_inc.inc_fibnum : fibnum)) != 0)
|
|
return (error);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (ifp == NULL) /* this should not happen */
|
|
panic("in6_selectsrc: NULL ifp");
|
|
#endif
|
|
error = in6_setscope(&dst, ifp, &odstzone);
|
|
if (error)
|
|
return (error);
|
|
|
|
IN6_IFADDR_RLOCK(&in6_ifa_tracker);
|
|
CK_STAILQ_FOREACH(ia, &V_in6_ifaddrhead, ia_link) {
|
|
int new_scope = -1, new_matchlen = -1;
|
|
struct in6_addrpolicy *new_policy = NULL;
|
|
u_int32_t srczone, osrczone, dstzone;
|
|
struct in6_addr src;
|
|
struct ifnet *ifp1 = ia->ia_ifp;
|
|
|
|
/*
|
|
* We'll never take an address that breaks the scope zone
|
|
* of the destination. We also skip an address if its zone
|
|
* does not contain the outgoing interface.
|
|
* XXX: we should probably use sin6_scope_id here.
|
|
*/
|
|
if (in6_setscope(&dst, ifp1, &dstzone) ||
|
|
odstzone != dstzone) {
|
|
continue;
|
|
}
|
|
src = ia->ia_addr.sin6_addr;
|
|
if (in6_setscope(&src, ifp, &osrczone) ||
|
|
in6_setscope(&src, ifp1, &srczone) ||
|
|
osrczone != srczone) {
|
|
continue;
|
|
}
|
|
|
|
/* avoid unusable addresses */
|
|
if ((ia->ia6_flags &
|
|
(IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
|
|
continue;
|
|
}
|
|
if (!V_ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
|
|
continue;
|
|
|
|
/* If jailed only take addresses of the jail into account. */
|
|
if (cred != NULL &&
|
|
prison_check_ip6(cred, &ia->ia_addr.sin6_addr) != 0)
|
|
continue;
|
|
|
|
/* Rule 1: Prefer same address */
|
|
if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
|
|
ia_best = ia;
|
|
BREAK(1); /* there should be no better candidate */
|
|
}
|
|
|
|
if (ia_best == NULL)
|
|
REPLACE(0);
|
|
|
|
/* Rule 2: Prefer appropriate scope */
|
|
if (dst_scope < 0)
|
|
dst_scope = in6_addrscope(&dst);
|
|
new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
|
|
if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
|
|
if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
|
|
REPLACE(2);
|
|
NEXT(2);
|
|
} else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
|
|
if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
|
|
NEXT(2);
|
|
REPLACE(2);
|
|
}
|
|
|
|
/*
|
|
* Rule 3: Avoid deprecated addresses. Note that the case of
|
|
* !ip6_use_deprecated is already rejected above.
|
|
*/
|
|
if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
|
|
NEXT(3);
|
|
if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
|
|
REPLACE(3);
|
|
|
|
/* Rule 4: Prefer home addresses */
|
|
/*
|
|
* XXX: This is a TODO. We should probably merge the MIP6
|
|
* case above.
|
|
*/
|
|
|
|
/* Rule 5: Prefer outgoing interface */
|
|
if (!(ND_IFINFO(ifp)->flags & ND6_IFF_NO_PREFER_IFACE)) {
|
|
if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
|
|
NEXT(5);
|
|
if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
|
|
REPLACE(5);
|
|
}
|
|
|
|
/*
|
|
* Rule 6: Prefer matching label
|
|
* Note that best_policy should be non-NULL here.
|
|
*/
|
|
if (dst_policy == NULL)
|
|
dst_policy = lookup_addrsel_policy(dstsock);
|
|
if (dst_policy->label != ADDR_LABEL_NOTAPP) {
|
|
new_policy = lookup_addrsel_policy(&ia->ia_addr);
|
|
if (dst_policy->label == best_policy->label &&
|
|
dst_policy->label != new_policy->label)
|
|
NEXT(6);
|
|
if (dst_policy->label != best_policy->label &&
|
|
dst_policy->label == new_policy->label)
|
|
REPLACE(6);
|
|
}
|
|
|
|
/*
|
|
* Rule 7: Prefer public addresses.
|
|
* We allow users to reverse the logic by configuring
|
|
* a sysctl variable, so that privacy conscious users can
|
|
* always prefer temporary addresses.
|
|
*/
|
|
if (opts == NULL ||
|
|
opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
|
|
prefer_tempaddr = V_ip6_prefer_tempaddr;
|
|
} else if (opts->ip6po_prefer_tempaddr ==
|
|
IP6PO_TEMPADDR_NOTPREFER) {
|
|
prefer_tempaddr = 0;
|
|
} else
|
|
prefer_tempaddr = 1;
|
|
if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
|
|
(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
|
|
if (prefer_tempaddr)
|
|
REPLACE(7);
|
|
else
|
|
NEXT(7);
|
|
}
|
|
if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
|
|
!(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
|
|
if (prefer_tempaddr)
|
|
NEXT(7);
|
|
else
|
|
REPLACE(7);
|
|
}
|
|
|
|
/*
|
|
* Rule 8: prefer addresses on alive interfaces.
|
|
* This is a KAME specific rule.
|
|
*/
|
|
if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
|
|
!(ia->ia_ifp->if_flags & IFF_UP))
|
|
NEXT(8);
|
|
if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
|
|
(ia->ia_ifp->if_flags & IFF_UP))
|
|
REPLACE(8);
|
|
|
|
/*
|
|
* Rule 9: prefer address with better virtual status.
|
|
*/
|
|
if (ifa_preferred(&ia_best->ia_ifa, &ia->ia_ifa))
|
|
REPLACE(9);
|
|
if (ifa_preferred(&ia->ia_ifa, &ia_best->ia_ifa))
|
|
NEXT(9);
|
|
|
|
/*
|
|
* Rule 10: prefer address with `prefer_source' flag.
|
|
*/
|
|
if ((ia_best->ia6_flags & IN6_IFF_PREFER_SOURCE) == 0 &&
|
|
(ia->ia6_flags & IN6_IFF_PREFER_SOURCE) != 0)
|
|
REPLACE(10);
|
|
if ((ia_best->ia6_flags & IN6_IFF_PREFER_SOURCE) != 0 &&
|
|
(ia->ia6_flags & IN6_IFF_PREFER_SOURCE) == 0)
|
|
NEXT(10);
|
|
|
|
/*
|
|
* Rule 14: Use longest matching prefix.
|
|
* Note: in the address selection draft, this rule is
|
|
* documented as "Rule 8". However, since it is also
|
|
* documented that this rule can be overridden, we assign
|
|
* a large number so that it is easy to assign smaller numbers
|
|
* to more preferred rules.
|
|
*/
|
|
new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
|
|
if (best_matchlen < new_matchlen)
|
|
REPLACE(14);
|
|
if (new_matchlen < best_matchlen)
|
|
NEXT(14);
|
|
|
|
/* Rule 15 is reserved. */
|
|
|
|
/*
|
|
* Last resort: just keep the current candidate.
|
|
* Or, do we need more rules?
|
|
*/
|
|
continue;
|
|
|
|
replace:
|
|
ia_best = ia;
|
|
best_scope = (new_scope >= 0 ? new_scope :
|
|
in6_addrscope(&ia_best->ia_addr.sin6_addr));
|
|
best_policy = (new_policy ? new_policy :
|
|
lookup_addrsel_policy(&ia_best->ia_addr));
|
|
best_matchlen = (new_matchlen >= 0 ? new_matchlen :
|
|
in6_matchlen(&ia_best->ia_addr.sin6_addr,
|
|
&dst));
|
|
|
|
next:
|
|
continue;
|
|
|
|
out:
|
|
break;
|
|
}
|
|
|
|
if ((ia = ia_best) == NULL) {
|
|
IN6_IFADDR_RUNLOCK(&in6_ifa_tracker);
|
|
IP6STAT_INC(ip6s_sources_none);
|
|
return (EADDRNOTAVAIL);
|
|
}
|
|
|
|
/*
|
|
* At this point at least one of the addresses belonged to the jail
|
|
* but it could still be, that we want to further restrict it, e.g.
|
|
* theoratically IN6_IS_ADDR_LOOPBACK.
|
|
* It must not be IN6_IS_ADDR_UNSPECIFIED anymore.
|
|
* prison_local_ip6() will fix an IN6_IS_ADDR_LOOPBACK but should
|
|
* let all others previously selected pass.
|
|
* Use tmp to not change ::1 on lo0 to the primary jail address.
|
|
*/
|
|
tmp = ia->ia_addr.sin6_addr;
|
|
if (cred != NULL && prison_local_ip6(cred, &tmp, (inp != NULL &&
|
|
(inp->inp_flags & IN6P_IPV6_V6ONLY) != 0)) != 0) {
|
|
IN6_IFADDR_RUNLOCK(&in6_ifa_tracker);
|
|
IP6STAT_INC(ip6s_sources_none);
|
|
return (EADDRNOTAVAIL);
|
|
}
|
|
|
|
if (ifpp)
|
|
*ifpp = ifp;
|
|
|
|
bcopy(&tmp, srcp, sizeof(*srcp));
|
|
if (ia->ia_ifp == ifp)
|
|
IP6STAT_INC(ip6s_sources_sameif[best_scope]);
|
|
else
|
|
IP6STAT_INC(ip6s_sources_otherif[best_scope]);
|
|
if (dst_scope == best_scope)
|
|
IP6STAT_INC(ip6s_sources_samescope[best_scope]);
|
|
else
|
|
IP6STAT_INC(ip6s_sources_otherscope[best_scope]);
|
|
if (IFA6_IS_DEPRECATED(ia))
|
|
IP6STAT_INC(ip6s_sources_deprecated[best_scope]);
|
|
IN6_IFADDR_RUNLOCK(&in6_ifa_tracker);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Select source address based on @inp, @dstsock and @opts.
|
|
* Stores selected address to @srcp. If @scope_ambiguous is set,
|
|
* embed scope from selected outgoing interface. If @hlim pointer
|
|
* is provided, stores calculated hop limit there.
|
|
* Returns 0 on success.
|
|
*/
|
|
int
|
|
in6_selectsrc_socket(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
|
|
struct inpcb *inp, struct ucred *cred, int scope_ambiguous,
|
|
struct in6_addr *srcp, int *hlim)
|
|
{
|
|
struct ifnet *retifp;
|
|
uint32_t fibnum;
|
|
int error;
|
|
|
|
fibnum = inp->inp_inc.inc_fibnum;
|
|
retifp = NULL;
|
|
|
|
error = in6_selectsrc(fibnum, dstsock, opts, inp, cred, &retifp, srcp);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
if (hlim != NULL)
|
|
*hlim = in6_selecthlim(inp, retifp);
|
|
|
|
if (retifp == NULL || scope_ambiguous == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Application should provide a proper zone ID or the use of
|
|
* default zone IDs should be enabled. Unfortunately, some
|
|
* applications do not behave as it should, so we need a
|
|
* workaround. Even if an appropriate ID is not determined
|
|
* (when it's required), if we can determine the outgoing
|
|
* interface. determine the zone ID based on the interface.
|
|
*/
|
|
error = in6_setscope(&dstsock->sin6_addr, retifp, NULL);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Select source address based on @fibnum, @dst and @scopeid.
|
|
* Stores selected address to @srcp.
|
|
* Returns 0 on success.
|
|
*
|
|
* Used by non-socket based consumers (ND code mostly)
|
|
*/
|
|
int
|
|
in6_selectsrc_addr(uint32_t fibnum, const struct in6_addr *dst,
|
|
uint32_t scopeid, struct ifnet *ifp, struct in6_addr *srcp,
|
|
int *hlim)
|
|
{
|
|
struct ifnet *retifp;
|
|
struct sockaddr_in6 dst_sa;
|
|
int error;
|
|
|
|
retifp = ifp;
|
|
bzero(&dst_sa, sizeof(dst_sa));
|
|
dst_sa.sin6_family = AF_INET6;
|
|
dst_sa.sin6_len = sizeof(dst_sa);
|
|
dst_sa.sin6_addr = *dst;
|
|
dst_sa.sin6_scope_id = scopeid;
|
|
sa6_embedscope(&dst_sa, 0);
|
|
|
|
error = in6_selectsrc(fibnum, &dst_sa, NULL, NULL, NULL, &retifp, srcp);
|
|
if (hlim != NULL)
|
|
*hlim = in6_selecthlim(NULL, retifp);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* clone - meaningful only for bsdi and freebsd
|
|
*/
|
|
static int
|
|
selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
|
|
struct ip6_moptions *mopts, struct route_in6 *ro,
|
|
struct ifnet **retifp, struct rtentry **retrt, int norouteok, u_int fibnum)
|
|
{
|
|
int error = 0;
|
|
struct ifnet *ifp = NULL;
|
|
struct rtentry *rt = NULL;
|
|
struct sockaddr_in6 *sin6_next;
|
|
struct in6_pktinfo *pi = NULL;
|
|
struct in6_addr *dst = &dstsock->sin6_addr;
|
|
uint32_t zoneid;
|
|
#if 0
|
|
char ip6buf[INET6_ADDRSTRLEN];
|
|
|
|
if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
|
|
dstsock->sin6_addr.s6_addr32[1] == 0 &&
|
|
!IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
|
|
printf("in6_selectroute: strange destination %s\n",
|
|
ip6_sprintf(ip6buf, &dstsock->sin6_addr));
|
|
} else {
|
|
printf("in6_selectroute: destination = %s%%%d\n",
|
|
ip6_sprintf(ip6buf, &dstsock->sin6_addr),
|
|
dstsock->sin6_scope_id); /* for debug */
|
|
}
|
|
#endif
|
|
|
|
/* If the caller specify the outgoing interface explicitly, use it. */
|
|
if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
|
|
/* XXX boundary check is assumed to be already done. */
|
|
ifp = ifnet_byindex(pi->ipi6_ifindex);
|
|
if (ifp != NULL &&
|
|
(norouteok || retrt == NULL ||
|
|
IN6_IS_ADDR_MULTICAST(dst))) {
|
|
/*
|
|
* we do not have to check or get the route for
|
|
* multicast.
|
|
*/
|
|
goto done;
|
|
} else
|
|
goto getroute;
|
|
}
|
|
/*
|
|
* If the destination address is a multicast address and the outgoing
|
|
* interface for the address is specified by the caller, use it.
|
|
*/
|
|
if (IN6_IS_ADDR_MULTICAST(dst) &&
|
|
mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
|
|
goto done; /* we do not need a route for multicast. */
|
|
}
|
|
/*
|
|
* If destination address is LLA or link- or node-local multicast,
|
|
* use it's embedded scope zone id to determine outgoing interface.
|
|
*/
|
|
if (IN6_IS_ADDR_MC_LINKLOCAL(dst) ||
|
|
IN6_IS_ADDR_MC_NODELOCAL(dst)) {
|
|
zoneid = ntohs(in6_getscope(dst));
|
|
if (zoneid > 0) {
|
|
ifp = in6_getlinkifnet(zoneid);
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
getroute:
|
|
/*
|
|
* If the next hop address for the packet is specified by the caller,
|
|
* use it as the gateway.
|
|
*/
|
|
if (opts && opts->ip6po_nexthop) {
|
|
struct route_in6 *ron;
|
|
|
|
sin6_next = satosin6(opts->ip6po_nexthop);
|
|
if (IN6_IS_ADDR_LINKLOCAL(&sin6_next->sin6_addr)) {
|
|
/*
|
|
* Next hop is LLA, thus it should be neighbor.
|
|
* Determine outgoing interface by zone index.
|
|
*/
|
|
zoneid = ntohs(in6_getscope(&sin6_next->sin6_addr));
|
|
if (zoneid > 0) {
|
|
ifp = in6_getlinkifnet(zoneid);
|
|
goto done;
|
|
}
|
|
}
|
|
ron = &opts->ip6po_nextroute;
|
|
/* Use a cached route if it exists and is valid. */
|
|
if (ron->ro_rt != NULL && (
|
|
(ron->ro_rt->rt_flags & RTF_UP) == 0 ||
|
|
ron->ro_dst.sin6_family != AF_INET6 ||
|
|
!IN6_ARE_ADDR_EQUAL(&ron->ro_dst.sin6_addr,
|
|
&sin6_next->sin6_addr)))
|
|
RO_RTFREE(ron);
|
|
if (ron->ro_rt == NULL) {
|
|
ron->ro_dst = *sin6_next;
|
|
in6_rtalloc(ron, fibnum); /* multi path case? */
|
|
}
|
|
/*
|
|
* The node identified by that address must be a
|
|
* neighbor of the sending host.
|
|
*/
|
|
if (ron->ro_rt == NULL ||
|
|
(ron->ro_rt->rt_flags & RTF_GATEWAY) != 0)
|
|
error = EHOSTUNREACH;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Use a cached route if it exists and is valid, else try to allocate
|
|
* a new one. Note that we should check the address family of the
|
|
* cached destination, in case of sharing the cache with IPv4.
|
|
*/
|
|
if (ro) {
|
|
if (ro->ro_rt &&
|
|
(!(ro->ro_rt->rt_flags & RTF_UP) ||
|
|
((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
|
|
!IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
|
|
dst))) {
|
|
RTFREE(ro->ro_rt);
|
|
ro->ro_rt = (struct rtentry *)NULL;
|
|
}
|
|
if (ro->ro_rt == (struct rtentry *)NULL) {
|
|
struct sockaddr_in6 *sa6;
|
|
|
|
/* No route yet, so try to acquire one */
|
|
bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
|
|
sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
|
|
*sa6 = *dstsock;
|
|
sa6->sin6_scope_id = 0;
|
|
|
|
#ifdef RADIX_MPATH
|
|
rtalloc_mpath_fib((struct route *)ro,
|
|
ntohl(sa6->sin6_addr.s6_addr32[3]), fibnum);
|
|
#else
|
|
ro->ro_rt = in6_rtalloc1((struct sockaddr *)
|
|
&ro->ro_dst, 0, 0UL, fibnum);
|
|
if (ro->ro_rt)
|
|
RT_UNLOCK(ro->ro_rt);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* do not care about the result if we have the nexthop
|
|
* explicitly specified.
|
|
*/
|
|
if (opts && opts->ip6po_nexthop)
|
|
goto done;
|
|
|
|
if (ro->ro_rt) {
|
|
ifp = ro->ro_rt->rt_ifp;
|
|
|
|
if (ifp == NULL) { /* can this really happen? */
|
|
RTFREE(ro->ro_rt);
|
|
ro->ro_rt = NULL;
|
|
}
|
|
}
|
|
if (ro->ro_rt == NULL)
|
|
error = EHOSTUNREACH;
|
|
rt = ro->ro_rt;
|
|
|
|
/*
|
|
* Check if the outgoing interface conflicts with
|
|
* the interface specified by ipi6_ifindex (if specified).
|
|
* Note that loopback interface is always okay.
|
|
* (this may happen when we are sending a packet to one of
|
|
* our own addresses.)
|
|
*/
|
|
if (ifp && opts && opts->ip6po_pktinfo &&
|
|
opts->ip6po_pktinfo->ipi6_ifindex) {
|
|
if (!(ifp->if_flags & IFF_LOOPBACK) &&
|
|
ifp->if_index !=
|
|
opts->ip6po_pktinfo->ipi6_ifindex) {
|
|
error = EHOSTUNREACH;
|
|
goto done;
|
|
}
|
|
}
|
|
}
|
|
|
|
done:
|
|
if (ifp == NULL && rt == NULL) {
|
|
/*
|
|
* This can happen if the caller did not pass a cached route
|
|
* nor any other hints. We treat this case an error.
|
|
*/
|
|
error = EHOSTUNREACH;
|
|
}
|
|
if (error == EHOSTUNREACH)
|
|
IP6STAT_INC(ip6s_noroute);
|
|
|
|
if (retifp != NULL) {
|
|
*retifp = ifp;
|
|
|
|
/*
|
|
* Adjust the "outgoing" interface. If we're going to loop
|
|
* the packet back to ourselves, the ifp would be the loopback
|
|
* interface. However, we'd rather know the interface associated
|
|
* to the destination address (which should probably be one of
|
|
* our own addresses.)
|
|
*/
|
|
if (rt) {
|
|
if ((rt->rt_ifp->if_flags & IFF_LOOPBACK) &&
|
|
(rt->rt_gateway->sa_family == AF_LINK))
|
|
*retifp =
|
|
ifnet_byindex(((struct sockaddr_dl *)
|
|
rt->rt_gateway)->sdl_index);
|
|
}
|
|
}
|
|
|
|
if (retrt != NULL)
|
|
*retrt = rt; /* rt may be NULL */
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
|
|
struct ip6_moptions *mopts, struct ifnet **retifp,
|
|
struct ifnet *oifp, u_int fibnum)
|
|
{
|
|
int error;
|
|
struct route_in6 sro;
|
|
struct rtentry *rt = NULL;
|
|
int rt_flags;
|
|
|
|
KASSERT(retifp != NULL, ("%s: retifp is NULL", __func__));
|
|
|
|
bzero(&sro, sizeof(sro));
|
|
rt_flags = 0;
|
|
|
|
error = selectroute(dstsock, opts, mopts, &sro, retifp, &rt, 1, fibnum);
|
|
|
|
if (rt)
|
|
rt_flags = rt->rt_flags;
|
|
if (rt && rt == sro.ro_rt)
|
|
RTFREE(rt);
|
|
|
|
if (error != 0) {
|
|
/* Help ND. See oifp comment in in6_selectsrc(). */
|
|
if (oifp != NULL && fibnum == RT_DEFAULT_FIB) {
|
|
*retifp = oifp;
|
|
error = 0;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* do not use a rejected or black hole route.
|
|
* XXX: this check should be done in the L2 output routine.
|
|
* However, if we skipped this check here, we'd see the following
|
|
* scenario:
|
|
* - install a rejected route for a scoped address prefix
|
|
* (like fe80::/10)
|
|
* - send a packet to a destination that matches the scoped prefix,
|
|
* with ambiguity about the scope zone.
|
|
* - pick the outgoing interface from the route, and disambiguate the
|
|
* scope zone with the interface.
|
|
* - ip6_output() would try to get another route with the "new"
|
|
* destination, which may be valid.
|
|
* - we'd see no error on output.
|
|
* Although this may not be very harmful, it should still be confusing.
|
|
* We thus reject the case here.
|
|
*/
|
|
|
|
if (rt_flags & (RTF_REJECT | RTF_BLACKHOLE)) {
|
|
error = (rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
|
|
return (error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Public wrapper function to selectroute().
|
|
*
|
|
* XXX-BZ in6_selectroute() should and will grow the FIB argument. The
|
|
* in6_selectroute_fib() function is only there for backward compat on stable.
|
|
*/
|
|
int
|
|
in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
|
|
struct ip6_moptions *mopts, struct route_in6 *ro,
|
|
struct ifnet **retifp, struct rtentry **retrt)
|
|
{
|
|
|
|
return (selectroute(dstsock, opts, mopts, ro, retifp,
|
|
retrt, 0, RT_DEFAULT_FIB));
|
|
}
|
|
|
|
#ifndef BURN_BRIDGES
|
|
int
|
|
in6_selectroute_fib(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
|
|
struct ip6_moptions *mopts, struct route_in6 *ro,
|
|
struct ifnet **retifp, struct rtentry **retrt, u_int fibnum)
|
|
{
|
|
|
|
return (selectroute(dstsock, opts, mopts, ro, retifp,
|
|
retrt, 0, fibnum));
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Default hop limit selection. The precedence is as follows:
|
|
* 1. Hoplimit value specified via ioctl.
|
|
* 2. (If the outgoing interface is detected) the current
|
|
* hop limit of the interface specified by router advertisement.
|
|
* 3. The system default hoplimit.
|
|
*/
|
|
int
|
|
in6_selecthlim(struct inpcb *in6p, struct ifnet *ifp)
|
|
{
|
|
|
|
if (in6p && in6p->in6p_hops >= 0)
|
|
return (in6p->in6p_hops);
|
|
else if (ifp)
|
|
return (ND_IFINFO(ifp)->chlim);
|
|
else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
|
|
struct nhop6_basic nh6;
|
|
struct in6_addr dst;
|
|
uint32_t fibnum, scopeid;
|
|
int hlim;
|
|
|
|
fibnum = in6p->inp_inc.inc_fibnum;
|
|
in6_splitscope(&in6p->in6p_faddr, &dst, &scopeid);
|
|
if (fib6_lookup_nh_basic(fibnum, &dst, scopeid, 0, 0, &nh6)==0){
|
|
hlim = ND_IFINFO(nh6.nh_ifp)->chlim;
|
|
return (hlim);
|
|
}
|
|
}
|
|
return (V_ip6_defhlim);
|
|
}
|
|
|
|
/*
|
|
* XXX: this is borrowed from in6_pcbbind(). If possible, we should
|
|
* share this function by all *bsd*...
|
|
*/
|
|
int
|
|
in6_pcbsetport(struct in6_addr *laddr, struct inpcb *inp, struct ucred *cred)
|
|
{
|
|
struct socket *so = inp->inp_socket;
|
|
u_int16_t lport = 0;
|
|
int error, lookupflags = 0;
|
|
#ifdef INVARIANTS
|
|
struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
|
|
#endif
|
|
|
|
INP_WLOCK_ASSERT(inp);
|
|
INP_HASH_WLOCK_ASSERT(pcbinfo);
|
|
|
|
error = prison_local_ip6(cred, laddr,
|
|
((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0));
|
|
if (error)
|
|
return(error);
|
|
|
|
/* XXX: this is redundant when called from in6_pcbbind */
|
|
if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT|SO_REUSEPORT_LB)) == 0)
|
|
lookupflags = INPLOOKUP_WILDCARD;
|
|
|
|
inp->inp_flags |= INP_ANONPORT;
|
|
|
|
error = in_pcb_lport(inp, NULL, &lport, cred, lookupflags);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
inp->inp_lport = lport;
|
|
if (in_pcbinshash(inp) != 0) {
|
|
inp->in6p_laddr = in6addr_any;
|
|
inp->inp_lport = 0;
|
|
return (EAGAIN);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
addrsel_policy_init(void)
|
|
{
|
|
|
|
init_policy_queue();
|
|
|
|
/* initialize the "last resort" policy */
|
|
bzero(&V_defaultaddrpolicy, sizeof(V_defaultaddrpolicy));
|
|
V_defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
|
|
|
|
if (!IS_DEFAULT_VNET(curvnet))
|
|
return;
|
|
|
|
ADDRSEL_LOCK_INIT();
|
|
ADDRSEL_SXLOCK_INIT();
|
|
}
|
|
|
|
static struct in6_addrpolicy *
|
|
lookup_addrsel_policy(struct sockaddr_in6 *key)
|
|
{
|
|
struct in6_addrpolicy *match = NULL;
|
|
|
|
ADDRSEL_LOCK();
|
|
match = match_addrsel_policy(key);
|
|
|
|
if (match == NULL)
|
|
match = &V_defaultaddrpolicy;
|
|
else
|
|
match->use++;
|
|
ADDRSEL_UNLOCK();
|
|
|
|
return (match);
|
|
}
|
|
|
|
/*
|
|
* Subroutines to manage the address selection policy table via sysctl.
|
|
*/
|
|
struct walkarg {
|
|
struct sysctl_req *w_req;
|
|
};
|
|
|
|
static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
|
|
SYSCTL_DECL(_net_inet6_ip6);
|
|
static SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
|
|
CTLFLAG_RD, in6_src_sysctl, "");
|
|
|
|
static int
|
|
in6_src_sysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct walkarg w;
|
|
|
|
if (req->newptr)
|
|
return EPERM;
|
|
|
|
bzero(&w, sizeof(w));
|
|
w.w_req = req;
|
|
|
|
return (walk_addrsel_policy(dump_addrsel_policyent, &w));
|
|
}
|
|
|
|
int
|
|
in6_src_ioctl(u_long cmd, caddr_t data)
|
|
{
|
|
struct in6_addrpolicy ent0;
|
|
|
|
if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
|
|
return (EOPNOTSUPP); /* check for safety */
|
|
|
|
ent0 = *(struct in6_addrpolicy *)data;
|
|
|
|
if (ent0.label == ADDR_LABEL_NOTAPP)
|
|
return (EINVAL);
|
|
/* check if the prefix mask is consecutive. */
|
|
if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
|
|
return (EINVAL);
|
|
/* clear trailing garbages (if any) of the prefix address. */
|
|
IN6_MASK_ADDR(&ent0.addr.sin6_addr, &ent0.addrmask.sin6_addr);
|
|
ent0.use = 0;
|
|
|
|
switch (cmd) {
|
|
case SIOCAADDRCTL_POLICY:
|
|
return (add_addrsel_policyent(&ent0));
|
|
case SIOCDADDRCTL_POLICY:
|
|
return (delete_addrsel_policyent(&ent0));
|
|
}
|
|
|
|
return (0); /* XXX: compromise compilers */
|
|
}
|
|
|
|
/*
|
|
* The followings are implementation of the policy table using a
|
|
* simple tail queue.
|
|
* XXX such details should be hidden.
|
|
* XXX implementation using binary tree should be more efficient.
|
|
*/
|
|
struct addrsel_policyent {
|
|
TAILQ_ENTRY(addrsel_policyent) ape_entry;
|
|
struct in6_addrpolicy ape_policy;
|
|
};
|
|
|
|
TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
|
|
|
|
static VNET_DEFINE(struct addrsel_policyhead, addrsel_policytab);
|
|
#define V_addrsel_policytab VNET(addrsel_policytab)
|
|
|
|
static void
|
|
init_policy_queue(void)
|
|
{
|
|
|
|
TAILQ_INIT(&V_addrsel_policytab);
|
|
}
|
|
|
|
static int
|
|
add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
|
|
{
|
|
struct addrsel_policyent *new, *pol;
|
|
|
|
new = malloc(sizeof(*new), M_IFADDR,
|
|
M_WAITOK);
|
|
ADDRSEL_XLOCK();
|
|
ADDRSEL_LOCK();
|
|
|
|
/* duplication check */
|
|
TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
|
|
if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
|
|
&pol->ape_policy.addr.sin6_addr) &&
|
|
IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
|
|
&pol->ape_policy.addrmask.sin6_addr)) {
|
|
ADDRSEL_UNLOCK();
|
|
ADDRSEL_XUNLOCK();
|
|
free(new, M_IFADDR);
|
|
return (EEXIST); /* or override it? */
|
|
}
|
|
}
|
|
|
|
bzero(new, sizeof(*new));
|
|
|
|
/* XXX: should validate entry */
|
|
new->ape_policy = *newpolicy;
|
|
|
|
TAILQ_INSERT_TAIL(&V_addrsel_policytab, new, ape_entry);
|
|
ADDRSEL_UNLOCK();
|
|
ADDRSEL_XUNLOCK();
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
delete_addrsel_policyent(struct in6_addrpolicy *key)
|
|
{
|
|
struct addrsel_policyent *pol;
|
|
|
|
ADDRSEL_XLOCK();
|
|
ADDRSEL_LOCK();
|
|
|
|
/* search for the entry in the table */
|
|
TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
|
|
if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
|
|
&pol->ape_policy.addr.sin6_addr) &&
|
|
IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
|
|
&pol->ape_policy.addrmask.sin6_addr)) {
|
|
break;
|
|
}
|
|
}
|
|
if (pol == NULL) {
|
|
ADDRSEL_UNLOCK();
|
|
ADDRSEL_XUNLOCK();
|
|
return (ESRCH);
|
|
}
|
|
|
|
TAILQ_REMOVE(&V_addrsel_policytab, pol, ape_entry);
|
|
ADDRSEL_UNLOCK();
|
|
ADDRSEL_XUNLOCK();
|
|
free(pol, M_IFADDR);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
walk_addrsel_policy(int (*callback)(struct in6_addrpolicy *, void *), void *w)
|
|
{
|
|
struct addrsel_policyent *pol;
|
|
int error = 0;
|
|
|
|
ADDRSEL_SLOCK();
|
|
TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
|
|
if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
|
|
ADDRSEL_SUNLOCK();
|
|
return (error);
|
|
}
|
|
}
|
|
ADDRSEL_SUNLOCK();
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
|
|
{
|
|
int error = 0;
|
|
struct walkarg *w = arg;
|
|
|
|
error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
|
|
|
|
return (error);
|
|
}
|
|
|
|
static struct in6_addrpolicy *
|
|
match_addrsel_policy(struct sockaddr_in6 *key)
|
|
{
|
|
struct addrsel_policyent *pent;
|
|
struct in6_addrpolicy *bestpol = NULL, *pol;
|
|
int matchlen, bestmatchlen = -1;
|
|
u_char *mp, *ep, *k, *p, m;
|
|
|
|
TAILQ_FOREACH(pent, &V_addrsel_policytab, ape_entry) {
|
|
matchlen = 0;
|
|
|
|
pol = &pent->ape_policy;
|
|
mp = (u_char *)&pol->addrmask.sin6_addr;
|
|
ep = mp + 16; /* XXX: scope field? */
|
|
k = (u_char *)&key->sin6_addr;
|
|
p = (u_char *)&pol->addr.sin6_addr;
|
|
for (; mp < ep && *mp; mp++, k++, p++) {
|
|
m = *mp;
|
|
if ((*k & m) != *p)
|
|
goto next; /* not match */
|
|
if (m == 0xff) /* short cut for a typical case */
|
|
matchlen += 8;
|
|
else {
|
|
while (m >= 0x80) {
|
|
matchlen++;
|
|
m <<= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* matched. check if this is better than the current best. */
|
|
if (bestpol == NULL ||
|
|
matchlen > bestmatchlen) {
|
|
bestpol = pol;
|
|
bestmatchlen = matchlen;
|
|
}
|
|
|
|
next:
|
|
continue;
|
|
}
|
|
|
|
return (bestpol);
|
|
}
|