freebsd-dev/sys/gnu/i386/fpemul/poly_l2.c
1999-08-28 01:08:13 +00:00

317 lines
9.4 KiB
C

/*
* poly_l2.c
*
* Compute the base 2 log of a FPU_REG, using a polynomial approximation.
*
*
* Copyright (C) 1992,1993,1994
* W. Metzenthen, 22 Parker St, Ormond, Vic 3163,
* Australia. E-mail billm@vaxc.cc.monash.edu.au
* All rights reserved.
*
* This copyright notice covers the redistribution and use of the
* FPU emulator developed by W. Metzenthen. It covers only its use
* in the 386BSD, FreeBSD and NetBSD operating systems. Any other
* use is not permitted under this copyright.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must include information specifying
* that source code for the emulator is freely available and include
* either:
* a) an offer to provide the source code for a nominal distribution
* fee, or
* b) list at least two alternative methods whereby the source
* can be obtained, e.g. a publically accessible bulletin board
* and an anonymous ftp site from which the software can be
* downloaded.
* 3. All advertising materials specifically mentioning features or use of
* this emulator must acknowledge that it was developed by W. Metzenthen.
* 4. The name of W. Metzenthen may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* W. METZENTHEN BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* The purpose of this copyright, based upon the Berkeley copyright, is to
* ensure that the covered software remains freely available to everyone.
*
* The software (with necessary differences) is also available, but under
* the terms of the GNU copyleft, for the Linux operating system and for
* the djgpp ms-dos extender.
*
* W. Metzenthen June 1994.
*
*
* $FreeBSD$
*
*/
#include <gnu/i386/fpemul/reg_constant.h>
#include <gnu/i386/fpemul/control_w.h>
#define HIPOWER 9
static unsigned short lterms[HIPOWER][4] =
{
/* Ideal computation with these coeffs gives about 64.6 bit rel
* accuracy. */
{0xe177, 0xb82f, 0x7652, 0x7154},
{0xee0f, 0xe80f, 0x2770, 0x7b1c},
{0x0fc0, 0xbe87, 0xb143, 0x49dd},
{0x78b9, 0xdadd, 0xec54, 0x34c2},
{0x003a, 0x5de9, 0x628b, 0x2909},
{0x5588, 0xed16, 0x4abf, 0x2193},
{0xb461, 0x85f7, 0x347a, 0x1c6a},
{0x0975, 0x87b3, 0xd5bf, 0x1876},
{0xe85c, 0xcec9, 0x84e7, 0x187d}
};
/*--- poly_l2() -------------------------------------------------------------+
| Base 2 logarithm by a polynomial approximation. |
+---------------------------------------------------------------------------*/
void
poly_l2(FPU_REG * arg, FPU_REG * result)
{
short exponent;
char zero; /* flag for an Xx == 0 */
unsigned short bits, shift;
long long Xsq;
FPU_REG accum, denom, num, Xx;
exponent = arg->exp - EXP_BIAS;
accum.tag = TW_Valid; /* set the tags to Valid */
if (arg->sigh > (unsigned) 0xb504f334) {
/* This is good enough for the computation of the polynomial
* sum, but actually results in a loss of precision for the
* computation of Xx. This will matter only if exponent
* becomes zero. */
exponent++;
accum.sign = 1; /* sign to negative */
num.exp = EXP_BIAS; /* needed to prevent errors in div
* routine */
reg_u_div(&CONST_1, arg, &num, FULL_PRECISION);
} else {
accum.sign = 0; /* set the sign to positive */
num.sigl = arg->sigl; /* copy the mantissa */
num.sigh = arg->sigh;
}
/* shift num left, lose the ms bit */
num.sigh <<= 1;
if (num.sigl & 0x80000000)
num.sigh |= 1;
num.sigl <<= 1;
denom.sigl = num.sigl;
denom.sigh = num.sigh;
poly_div4((long long *) &(denom.sigl));
denom.sigh += 0x80000000; /* set the msb */
Xx.exp = EXP_BIAS; /* needed to prevent errors in div routine */
reg_u_div(&num, &denom, &Xx, FULL_PRECISION);
zero = !(Xx.sigh | Xx.sigl);
mul64((long long *) &Xx.sigl, (long long *) &Xx.sigl, &Xsq);
poly_div16(&Xsq);
accum.exp = -1; /* exponent of accum */
/* Do the basic fixed point polynomial evaluation */
polynomial((unsigned *) &accum.sigl, (unsigned *) &Xsq, lterms, HIPOWER - 1);
if (!exponent) {
/* If the exponent is zero, then we would lose precision by
* sticking to fixed point computation here */
/* We need to re-compute Xx because of loss of precision. */
FPU_REG lXx;
char sign;
sign = accum.sign;
accum.sign = 0;
/* make accum compatible and normalize */
accum.exp = EXP_BIAS + accum.exp;
normalize(&accum);
if (zero) {
reg_move(&CONST_Z, result);
} else {
/* we need to re-compute lXx to better accuracy */
num.tag = TW_Valid; /* set the tags to Vaild */
num.sign = 0; /* set the sign to positive */
num.exp = EXP_BIAS - 1;
if (sign) {
/* The argument is of the form 1-x */
/* Use 1-1/(1-x) = x/(1-x) */
*((long long *) &num.sigl) = -*((long long *) &(arg->sigl));
normalize(&num);
reg_div(&num, arg, &num, FULL_PRECISION);
} else {
normalize(&num);
}
denom.tag = TW_Valid; /* set the tags to Valid */
denom.sign = SIGN_POS; /* set the sign to positive */
denom.exp = EXP_BIAS;
reg_div(&num, &denom, &lXx, FULL_PRECISION);
reg_u_mul(&lXx, &accum, &accum, FULL_PRECISION);
reg_u_add(&lXx, &accum, result, FULL_PRECISION);
normalize(result);
}
result->sign = sign;
return;
}
mul64((long long *) &accum.sigl,
(long long *) &Xx.sigl, (long long *) &accum.sigl);
*((long long *) (&accum.sigl)) += *((long long *) (&Xx.sigl));
if (Xx.sigh > accum.sigh) {
/* There was an overflow */
poly_div2((long long *) &accum.sigl);
accum.sigh |= 0x80000000;
accum.exp++;
}
/* When we add the exponent to the accum result later, we will require
* that their signs are the same. Here we ensure that this is so. */
if (exponent && ((exponent < 0) ^ (accum.sign))) {
/* signs are different */
accum.sign = !accum.sign;
/* An exceptional case is when accum is zero */
if (accum.sigl | accum.sigh) {
/* find 1-accum */
/* Shift to get exponent == 0 */
if (accum.exp < 0) {
poly_div2((long long *) &accum.sigl);
accum.exp++;
}
/* Just negate, but throw away the sign */
*((long long *) &(accum.sigl)) = -*((long long *) &(accum.sigl));
if (exponent < 0)
exponent++;
else
exponent--;
}
}
shift = exponent >= 0 ? exponent : -exponent;
bits = 0;
if (shift) {
if (accum.exp) {
accum.exp++;
poly_div2((long long *) &accum.sigl);
}
while (shift) {
poly_div2((long long *) &accum.sigl);
if (shift & 1)
accum.sigh |= 0x80000000;
shift >>= 1;
bits++;
}
}
/* Convert to 64 bit signed-compatible */
accum.exp += bits + EXP_BIAS - 1;
reg_move(&accum, result);
normalize(result);
return;
}
/*--- poly_l2p1() -----------------------------------------------------------+
| Base 2 logarithm by a polynomial approximation. |
| log2(x+1) |
+---------------------------------------------------------------------------*/
int
poly_l2p1(FPU_REG * arg, FPU_REG * result)
{
char sign = 0;
long long Xsq;
FPU_REG arg_pl1, denom, accum, local_arg, poly_arg;
sign = arg->sign;
reg_add(arg, &CONST_1, &arg_pl1, FULL_PRECISION);
if ((arg_pl1.sign) | (arg_pl1.tag)) { /* We need a valid positive
* number! */
return 1;
}
reg_add(&CONST_1, &arg_pl1, &denom, FULL_PRECISION);
reg_div(arg, &denom, &local_arg, FULL_PRECISION);
local_arg.sign = 0; /* Make the sign positive */
/* Now we need to check that |local_arg| is less than 3-2*sqrt(2) =
* 0.17157.. = .0xafb0ccc0 * 2^-2 */
if (local_arg.exp >= EXP_BIAS - 3) {
if ((local_arg.exp > EXP_BIAS - 3) ||
(local_arg.sigh > (unsigned) 0xafb0ccc0)) {
/* The argument is large */
poly_l2(&arg_pl1, result);
return 0;
}
}
/* Make a copy of local_arg */
reg_move(&local_arg, &poly_arg);
/* Get poly_arg bits aligned as required */
shrx((unsigned *) &(poly_arg.sigl), -(poly_arg.exp - EXP_BIAS + 3));
mul64((long long *) &(poly_arg.sigl), (long long *) &(poly_arg.sigl), &Xsq);
poly_div16(&Xsq);
/* Do the basic fixed point polynomial evaluation */
polynomial((u_int *) &accum.sigl, (unsigned *) &Xsq, lterms, HIPOWER - 1);
accum.tag = TW_Valid; /* set the tags to Valid */
accum.sign = SIGN_POS; /* and make accum positive */
/* make accum compatible and normalize */
accum.exp = EXP_BIAS - 1;
normalize(&accum);
reg_u_mul(&local_arg, &accum, &accum, FULL_PRECISION);
reg_u_add(&local_arg, &accum, result, FULL_PRECISION);
/* Multiply the result by 2 */
result->exp++;
result->sign = sign;
return 0;
}