freebsd-dev/sys/mips/sentry5/uart_bus_sbusart.c
Warner Losh 4d9ac6c76f As discussed on IRC and at BSDcan, move the mips32/* directories up a
level.  The distinction was artificial.  Some more movement around the
deck charis is likely depending on the fallout from this one.

Paths were corrected after the svn mv.  Hope that's OK.
2008-07-06 21:09:29 +00:00

96 lines
3.0 KiB
C

/*-
* Copyright (c) 2007 Bruce M. Simpson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* $Id$
*/
/*
* Skeleton of this file was based on respective code for ARM
* code written by Olivier Houchard.
*/
/*
* XXXMIPS: This file is hacked from arm/... . XXXMIPS here means this file is
* experimental and was written for MIPS32 port.
*/
#include "opt_uart.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <dev/pci/pcivar.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_bus.h>
#include <dev/uart/uart_cpu.h>
#include <mips/mips32/sentry5/sentry5reg.h>
#include "uart_if.h"
static int uart_malta_probe(device_t dev);
extern struct uart_class malta_uart_class;
static device_method_t uart_malta_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uart_malta_probe),
DEVMETHOD(device_attach, uart_bus_attach),
DEVMETHOD(device_detach, uart_bus_detach),
{ 0, 0 }
};
static driver_t uart_malta_driver = {
uart_driver_name,
uart_malta_methods,
sizeof(struct uart_softc),
};
extern SLIST_HEAD(uart_devinfo_list, uart_devinfo) uart_sysdevs;
static int
uart_malta_probe(device_t dev)
{
struct uart_softc *sc;
sc = device_get_softc(dev);
sc->sc_sysdev = SLIST_FIRST(&uart_sysdevs);
sc->sc_class = &uart_ns8250_class;
bcopy(&sc->sc_sysdev->bas, &sc->sc_bas, sizeof(sc->sc_bas));
sc->sc_sysdev->bas.bst = 0;
sc->sc_sysdev->bas.bsh = MIPS_PHYS_TO_KSEG1(SENTRY5_UART1ADR);
sc->sc_bas.bst = 0;
sc->sc_bas.bsh = MIPS_PHYS_TO_KSEG1(SENTRY5_UART1ADR);
return(uart_bus_probe(dev, 0, 0, 0, 0));
}
DRIVER_MODULE(uart, obio, uart_malta_driver, uart_devclass, 0, 0);