70d980fc34
fill up to the uart's rx fifo size, and leave any remaining input for when the rx fifo is read. This allows cut'n'paste of long lines to be done into the bhyve console without truncation. Also, introduce a mutex since the file input will run in the mevent thread context and may corrupt state accessed by a vCPU thread. Reviewed by: neel Approved by: NetApp
627 lines
13 KiB
C
627 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2012 NetApp, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/select.h>
|
|
#include <dev/ic/ns16550.h>
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <assert.h>
|
|
#include <termios.h>
|
|
#include <unistd.h>
|
|
#include <stdbool.h>
|
|
#include <string.h>
|
|
#include <pthread.h>
|
|
|
|
#include "bhyverun.h"
|
|
#include "pci_emul.h"
|
|
#include "mevent.h"
|
|
|
|
#define COM1_BASE 0x3F8
|
|
#define COM1_IRQ 4
|
|
#define COM2_BASE 0x2F8
|
|
#define COM2_IRQ 3
|
|
|
|
#define DEFAULT_RCLK 1843200
|
|
#define DEFAULT_BAUD 9600
|
|
|
|
#define FCR_RX_MASK 0xC0
|
|
|
|
#define MCR_OUT1 0x04
|
|
#define MCR_OUT2 0x08
|
|
|
|
#define MSR_DELTA_MASK 0x0f
|
|
|
|
#ifndef REG_SCR
|
|
#define REG_SCR com_scr
|
|
#endif
|
|
|
|
#define FIFOSZ 16
|
|
|
|
/*
|
|
* Pick a PCI vid/did of a chip with a single uart at
|
|
* BAR0, that most versions of FreeBSD can understand:
|
|
* Siig CyberSerial 1-port.
|
|
*/
|
|
#define COM_VENDOR 0x131f
|
|
#define COM_DEV 0x2000
|
|
|
|
static int pci_uart_stdio; /* stdio in use for i/o */
|
|
|
|
static int pci_uart_nldevs; /* number of legacy devices - 2 max */
|
|
|
|
static struct {
|
|
uint64_t baddr;
|
|
int vector;
|
|
} pci_uart_lres[] = {
|
|
{ COM1_BASE, COM1_IRQ},
|
|
{ COM2_BASE, COM2_IRQ},
|
|
{ 0, 0 }
|
|
};
|
|
|
|
struct fifo {
|
|
uint8_t buf[FIFOSZ];
|
|
int rindex; /* index to read from */
|
|
int windex; /* index to write to */
|
|
int num; /* number of characters in the fifo */
|
|
int size; /* size of the fifo */
|
|
};
|
|
|
|
struct pci_uart_softc {
|
|
struct pci_devinst *pi;
|
|
pthread_mutex_t mtx; /* protects all softc elements */
|
|
uint8_t data; /* Data register (R/W) */
|
|
uint8_t ier; /* Interrupt enable register (R/W) */
|
|
uint8_t lcr; /* Line control register (R/W) */
|
|
uint8_t mcr; /* Modem control register (R/W) */
|
|
uint8_t lsr; /* Line status register (R/W) */
|
|
uint8_t msr; /* Modem status register (R/W) */
|
|
uint8_t fcr; /* FIFO control register (W) */
|
|
uint8_t scr; /* Scratch register (R/W) */
|
|
|
|
uint8_t dll; /* Baudrate divisor latch LSB */
|
|
uint8_t dlh; /* Baudrate divisor latch MSB */
|
|
|
|
struct fifo rxfifo;
|
|
|
|
int opened;
|
|
int stdio;
|
|
bool thre_int_pending; /* THRE interrupt pending */
|
|
};
|
|
|
|
static void pci_uart_drain(int fd, enum ev_type ev, void *arg);
|
|
|
|
static struct termios tio_orig, tio_new; /* I/O Terminals */
|
|
|
|
static void
|
|
ttyclose(void)
|
|
{
|
|
tcsetattr(STDIN_FILENO, TCSANOW, &tio_orig);
|
|
}
|
|
|
|
static void
|
|
ttyopen(void)
|
|
{
|
|
tcgetattr(STDIN_FILENO, &tio_orig);
|
|
|
|
cfmakeraw(&tio_new);
|
|
tcsetattr(STDIN_FILENO, TCSANOW, &tio_new);
|
|
|
|
atexit(ttyclose);
|
|
}
|
|
|
|
static bool
|
|
tty_char_available(void)
|
|
{
|
|
fd_set rfds;
|
|
struct timeval tv;
|
|
|
|
FD_ZERO(&rfds);
|
|
FD_SET(STDIN_FILENO, &rfds);
|
|
tv.tv_sec = 0;
|
|
tv.tv_usec = 0;
|
|
if (select(STDIN_FILENO + 1, &rfds, NULL, NULL, &tv) > 0 ) {
|
|
return (true);
|
|
} else {
|
|
return (false);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ttyread(void)
|
|
{
|
|
char rb;
|
|
|
|
if (tty_char_available()) {
|
|
read(STDIN_FILENO, &rb, 1);
|
|
return (rb & 0xff);
|
|
} else {
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ttywrite(unsigned char wb)
|
|
{
|
|
(void) write(STDIN_FILENO, &wb, 1);
|
|
}
|
|
|
|
static void
|
|
fifo_reset(struct fifo *fifo, int size)
|
|
{
|
|
bzero(fifo, sizeof(struct fifo));
|
|
fifo->size = size;
|
|
}
|
|
|
|
static int
|
|
fifo_putchar(struct fifo *fifo, uint8_t ch)
|
|
{
|
|
|
|
if (fifo->num < fifo->size) {
|
|
fifo->buf[fifo->windex] = ch;
|
|
fifo->windex = (fifo->windex + 1) % fifo->size;
|
|
fifo->num++;
|
|
return (0);
|
|
} else
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
fifo_getchar(struct fifo *fifo)
|
|
{
|
|
int c;
|
|
|
|
if (fifo->num > 0) {
|
|
c = fifo->buf[fifo->rindex];
|
|
fifo->rindex = (fifo->rindex + 1) % fifo->size;
|
|
fifo->num--;
|
|
return (c);
|
|
} else
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
fifo_numchars(struct fifo *fifo)
|
|
{
|
|
|
|
return (fifo->num);
|
|
}
|
|
|
|
static int
|
|
fifo_available(struct fifo *fifo)
|
|
{
|
|
|
|
return (fifo->num < fifo->size);
|
|
}
|
|
|
|
static void
|
|
pci_uart_opentty(struct pci_uart_softc *sc)
|
|
{
|
|
struct mevent *mev;
|
|
|
|
assert(sc->opened == 0);
|
|
assert(sc->stdio);
|
|
|
|
ttyopen();
|
|
mev = mevent_add(STDIN_FILENO, EVF_READ, pci_uart_drain, sc);
|
|
assert(mev);
|
|
}
|
|
|
|
static void
|
|
pci_uart_legacy_res(uint64_t *bar, int *ivec)
|
|
{
|
|
if (pci_uart_lres[pci_uart_nldevs].baddr != 0) {
|
|
*bar = pci_uart_lres[pci_uart_nldevs].baddr;
|
|
*ivec = pci_uart_lres[pci_uart_nldevs].vector;
|
|
pci_uart_nldevs++;
|
|
} else {
|
|
/* TODO: print warning ? */
|
|
*bar = 0;
|
|
*ivec= -1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The IIR returns a prioritized interrupt reason:
|
|
* - receive data available
|
|
* - transmit holding register empty
|
|
* - modem status change
|
|
*
|
|
* Return an interrupt reason if one is available.
|
|
*/
|
|
static int
|
|
pci_uart_intr_reason(struct pci_uart_softc *sc)
|
|
{
|
|
|
|
if ((sc->lsr & LSR_OE) != 0 && (sc->ier & IER_ERLS) != 0)
|
|
return (IIR_RLS);
|
|
else if (fifo_numchars(&sc->rxfifo) > 0 && (sc->ier & IER_ERXRDY) != 0)
|
|
return (IIR_RXTOUT);
|
|
else if (sc->thre_int_pending && (sc->ier & IER_ETXRDY) != 0)
|
|
return (IIR_TXRDY);
|
|
else if ((sc->msr & MSR_DELTA_MASK) != 0 && (sc->ier & IER_EMSC) != 0)
|
|
return (IIR_MLSC);
|
|
else
|
|
return (IIR_NOPEND);
|
|
}
|
|
|
|
static void
|
|
pci_uart_reset(struct pci_uart_softc *sc)
|
|
{
|
|
uint16_t divisor;
|
|
|
|
divisor = DEFAULT_RCLK / DEFAULT_BAUD / 16;
|
|
sc->dll = divisor;
|
|
sc->dlh = divisor >> 16;
|
|
|
|
fifo_reset(&sc->rxfifo, 1); /* no fifo until enabled by software */
|
|
}
|
|
|
|
/*
|
|
* Toggle the COM port's intr pin depending on whether or not we have an
|
|
* interrupt condition to report to the processor.
|
|
*/
|
|
static void
|
|
pci_uart_toggle_intr(struct pci_uart_softc *sc)
|
|
{
|
|
uint8_t intr_reason;
|
|
|
|
intr_reason = pci_uart_intr_reason(sc);
|
|
|
|
if (intr_reason == IIR_NOPEND)
|
|
pci_lintr_deassert(sc->pi);
|
|
else
|
|
pci_lintr_assert(sc->pi);
|
|
}
|
|
|
|
static void
|
|
pci_uart_drain(int fd, enum ev_type ev, void *arg)
|
|
{
|
|
struct pci_uart_softc *sc;
|
|
int ch;
|
|
|
|
sc = arg;
|
|
|
|
assert(fd == STDIN_FILENO);
|
|
assert(ev == EVF_READ);
|
|
|
|
/*
|
|
* This routine is called in the context of the mevent thread
|
|
* to take out the softc lock to protect against concurrent
|
|
* access from a vCPU i/o exit
|
|
*/
|
|
pthread_mutex_lock(&sc->mtx);
|
|
|
|
if ((sc->mcr & MCR_LOOPBACK) != 0) {
|
|
(void) ttyread();
|
|
} else {
|
|
while (fifo_available(&sc->rxfifo) &&
|
|
((ch = ttyread()) != -1)) {
|
|
fifo_putchar(&sc->rxfifo, ch);
|
|
}
|
|
pci_uart_toggle_intr(sc);
|
|
}
|
|
|
|
pthread_mutex_unlock(&sc->mtx);
|
|
}
|
|
|
|
static void
|
|
pci_uart_write(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
|
|
int baridx, uint64_t offset, int size, uint64_t value)
|
|
{
|
|
struct pci_uart_softc *sc;
|
|
int fifosz;
|
|
uint8_t msr;
|
|
|
|
sc = pi->pi_arg;
|
|
|
|
assert(baridx == 0);
|
|
assert(size == 1);
|
|
|
|
/* Open terminal */
|
|
if (!sc->opened && sc->stdio) {
|
|
pci_uart_opentty(sc);
|
|
sc->opened = 1;
|
|
}
|
|
|
|
pthread_mutex_lock(&sc->mtx);
|
|
|
|
/*
|
|
* Take care of the special case DLAB accesses first
|
|
*/
|
|
if ((sc->lcr & LCR_DLAB) != 0) {
|
|
if (offset == REG_DLL) {
|
|
sc->dll = value;
|
|
goto done;
|
|
}
|
|
|
|
if (offset == REG_DLH) {
|
|
sc->dlh = value;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
switch (offset) {
|
|
case REG_DATA:
|
|
if (sc->mcr & MCR_LOOPBACK) {
|
|
if (fifo_putchar(&sc->rxfifo, value) != 0)
|
|
sc->lsr |= LSR_OE;
|
|
} else if (sc->stdio) {
|
|
ttywrite(value);
|
|
} /* else drop on floor */
|
|
sc->thre_int_pending = true;
|
|
break;
|
|
case REG_IER:
|
|
/*
|
|
* Apply mask so that bits 4-7 are 0
|
|
* Also enables bits 0-3 only if they're 1
|
|
*/
|
|
sc->ier = value & 0x0F;
|
|
break;
|
|
case REG_FCR:
|
|
/*
|
|
* When moving from FIFO and 16450 mode and vice versa,
|
|
* the FIFO contents are reset.
|
|
*/
|
|
if ((sc->fcr & FCR_ENABLE) ^ (value & FCR_ENABLE)) {
|
|
fifosz = (value & FCR_ENABLE) ? FIFOSZ : 1;
|
|
fifo_reset(&sc->rxfifo, fifosz);
|
|
}
|
|
|
|
/*
|
|
* The FCR_ENABLE bit must be '1' for the programming
|
|
* of other FCR bits to be effective.
|
|
*/
|
|
if ((value & FCR_ENABLE) == 0) {
|
|
sc->fcr = 0;
|
|
} else {
|
|
if ((value & FCR_RCV_RST) != 0)
|
|
fifo_reset(&sc->rxfifo, FIFOSZ);
|
|
|
|
sc->fcr = value &
|
|
(FCR_ENABLE | FCR_DMA | FCR_RX_MASK);
|
|
}
|
|
break;
|
|
case REG_LCR:
|
|
sc->lcr = value;
|
|
break;
|
|
case REG_MCR:
|
|
/* Apply mask so that bits 5-7 are 0 */
|
|
sc->mcr = value & 0x1F;
|
|
|
|
msr = 0;
|
|
if (sc->mcr & MCR_LOOPBACK) {
|
|
/*
|
|
* In the loopback mode certain bits from the
|
|
* MCR are reflected back into MSR
|
|
*/
|
|
if (sc->mcr & MCR_RTS)
|
|
msr |= MSR_CTS;
|
|
if (sc->mcr & MCR_DTR)
|
|
msr |= MSR_DSR;
|
|
if (sc->mcr & MCR_OUT1)
|
|
msr |= MSR_RI;
|
|
if (sc->mcr & MCR_OUT2)
|
|
msr |= MSR_DCD;
|
|
}
|
|
|
|
/*
|
|
* Detect if there has been any change between the
|
|
* previous and the new value of MSR. If there is
|
|
* then assert the appropriate MSR delta bit.
|
|
*/
|
|
if ((msr & MSR_CTS) ^ (sc->msr & MSR_CTS))
|
|
sc->msr |= MSR_DCTS;
|
|
if ((msr & MSR_DSR) ^ (sc->msr & MSR_DSR))
|
|
sc->msr |= MSR_DDSR;
|
|
if ((msr & MSR_DCD) ^ (sc->msr & MSR_DCD))
|
|
sc->msr |= MSR_DDCD;
|
|
if ((sc->msr & MSR_RI) != 0 && (msr & MSR_RI) == 0)
|
|
sc->msr |= MSR_TERI;
|
|
|
|
/*
|
|
* Update the value of MSR while retaining the delta
|
|
* bits.
|
|
*/
|
|
sc->msr &= MSR_DELTA_MASK;
|
|
sc->msr |= msr;
|
|
break;
|
|
case REG_LSR:
|
|
/*
|
|
* Line status register is not meant to be written to
|
|
* during normal operation.
|
|
*/
|
|
break;
|
|
case REG_MSR:
|
|
/*
|
|
* As far as I can tell MSR is a read-only register.
|
|
*/
|
|
break;
|
|
case REG_SCR:
|
|
sc->scr = value;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
done:
|
|
pci_uart_toggle_intr(sc);
|
|
pthread_mutex_unlock(&sc->mtx);
|
|
}
|
|
|
|
uint64_t
|
|
pci_uart_read(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
|
|
int baridx, uint64_t offset, int size)
|
|
{
|
|
struct pci_uart_softc *sc;
|
|
uint8_t iir, intr_reason;
|
|
uint64_t reg;
|
|
|
|
sc = pi->pi_arg;
|
|
|
|
assert(baridx == 0);
|
|
assert(size == 1);
|
|
|
|
/* Open terminal */
|
|
if (!sc->opened && sc->stdio) {
|
|
pci_uart_opentty(sc);
|
|
sc->opened = 1;
|
|
}
|
|
|
|
pthread_mutex_lock(&sc->mtx);
|
|
|
|
/*
|
|
* Take care of the special case DLAB accesses first
|
|
*/
|
|
if ((sc->lcr & LCR_DLAB) != 0) {
|
|
if (offset == REG_DLL) {
|
|
reg = sc->dll;
|
|
goto done;
|
|
}
|
|
|
|
if (offset == REG_DLH) {
|
|
reg = sc->dlh;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
switch (offset) {
|
|
case REG_DATA:
|
|
reg = fifo_getchar(&sc->rxfifo);
|
|
break;
|
|
case REG_IER:
|
|
reg = sc->ier;
|
|
break;
|
|
case REG_IIR:
|
|
iir = (sc->fcr & FCR_ENABLE) ? IIR_FIFO_MASK : 0;
|
|
|
|
intr_reason = pci_uart_intr_reason(sc);
|
|
|
|
/*
|
|
* Deal with side effects of reading the IIR register
|
|
*/
|
|
if (intr_reason == IIR_TXRDY)
|
|
sc->thre_int_pending = false;
|
|
|
|
iir |= intr_reason;
|
|
|
|
reg = iir;
|
|
break;
|
|
case REG_LCR:
|
|
reg = sc->lcr;
|
|
break;
|
|
case REG_MCR:
|
|
reg = sc->mcr;
|
|
break;
|
|
case REG_LSR:
|
|
/* Transmitter is always ready for more data */
|
|
sc->lsr |= LSR_TEMT | LSR_THRE;
|
|
|
|
/* Check for new receive data */
|
|
if (fifo_numchars(&sc->rxfifo) > 0)
|
|
sc->lsr |= LSR_RXRDY;
|
|
else
|
|
sc->lsr &= ~LSR_RXRDY;
|
|
|
|
reg = sc->lsr;
|
|
|
|
/* The LSR_OE bit is cleared on LSR read */
|
|
sc->lsr &= ~LSR_OE;
|
|
break;
|
|
case REG_MSR:
|
|
/*
|
|
* MSR delta bits are cleared on read
|
|
*/
|
|
reg = sc->msr;
|
|
sc->msr &= ~MSR_DELTA_MASK;
|
|
break;
|
|
case REG_SCR:
|
|
reg = sc->scr;
|
|
break;
|
|
default:
|
|
reg = 0xFF;
|
|
break;
|
|
}
|
|
|
|
done:
|
|
pci_uart_toggle_intr(sc);
|
|
pthread_mutex_unlock(&sc->mtx);
|
|
|
|
return (reg);
|
|
}
|
|
|
|
static int
|
|
pci_uart_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts)
|
|
{
|
|
struct pci_uart_softc *sc;
|
|
uint64_t bar;
|
|
int ivec;
|
|
|
|
sc = malloc(sizeof(struct pci_uart_softc));
|
|
memset(sc, 0, sizeof(struct pci_uart_softc));
|
|
|
|
pi->pi_arg = sc;
|
|
sc->pi = pi;
|
|
|
|
pthread_mutex_init(&sc->mtx, NULL);
|
|
|
|
/* initialize config space */
|
|
pci_set_cfgdata16(pi, PCIR_DEVICE, COM_DEV);
|
|
pci_set_cfgdata16(pi, PCIR_VENDOR, COM_VENDOR);
|
|
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_SIMPLECOMM);
|
|
if (pci_is_legacy(pi)) {
|
|
pci_uart_legacy_res(&bar, &ivec);
|
|
pci_emul_alloc_pbar(pi, 0, bar, PCIBAR_IO, 8);
|
|
} else {
|
|
ivec = -1;
|
|
pci_emul_alloc_bar(pi, 0, PCIBAR_IO, 8);
|
|
}
|
|
pci_lintr_request(pi, ivec);
|
|
|
|
if (opts != NULL && !strcmp("stdio", opts) && !pci_uart_stdio) {
|
|
pci_uart_stdio = 1;
|
|
sc->stdio = 1;
|
|
}
|
|
|
|
pci_uart_reset(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
struct pci_devemu pci_de_com = {
|
|
.pe_emu = "uart",
|
|
.pe_init = pci_uart_init,
|
|
.pe_barwrite = pci_uart_write,
|
|
.pe_barread = pci_uart_read
|
|
};
|
|
PCI_EMUL_SET(pci_de_com);
|