d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3876533b14
freebsd-dev/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c
Adrian Chadd 899d1cacac Update the AR9300 HAL to the latest public available HAL from QCA. 
I've been sitting on this for a year or so now; I've finally
tested it on enough devices to be reasonably sure it won't
cause too much drama.  But, if you see issues, please email me.

Tested (all STA mode):

PCIe:

* AR9380
* AR9390
* AR9580
* AR9462
* AR9485

SoC:

* QCA9550
* AR9331
* AR9342
2015-02-14 04:28:51 +00:00

692 lines
20 KiB
C
Raw Blame History

/*
* Copyright (c) 2012, 2013 Adrian Chadd <adrian@FreeBSD.org>.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "opt_ah.h"
#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ah_desc.h"
#include "ar9300.h"
#include "ar9300reg.h"
#include "ar9300phy.h"
#include "ar9300desc.h"
#include "ar9300_freebsd.h"
#include "ar9300_stub.h"
#include "ar9300_stub_funcs.h"
#define FIX_NOISE_FLOOR 1
#define NEXT_TBTT_NOW 5
static HAL_BOOL ar9300ClrMulticastFilterIndex(struct ath_hal *ah, uint32_t ix);
static HAL_BOOL ar9300SetMulticastFilterIndex(struct ath_hal *ah, uint32_t ix);
static void
ar9300SetChainMasks(struct ath_hal *ah, uint32_t tx_chainmask,
uint32_t rx_chainmask)
{
AH9300(ah)->ah_tx_chainmask =
tx_chainmask & AH_PRIVATE(ah)->ah_caps.halTxChainMask;
AH9300(ah)->ah_rx_chainmask =
rx_chainmask & AH_PRIVATE(ah)->ah_caps.halRxChainMask;
}
static u_int
ar9300GetSlotTime(struct ath_hal *ah)
{
u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SLOT) & 0xffff;
return (ath_hal_mac_usec(ah, clks)); /* convert from system clocks */
}
static HAL_BOOL
ar9300_freebsd_set_tx_power_limit(struct ath_hal *ah, uint32_t limit)
{
return (ar9300_set_tx_power_limit(ah, limit, 0, 0));
}
static uint64_t
ar9300_get_next_tbtt(struct ath_hal *ah)
{
return (OS_REG_READ(ah, AR_NEXT_TBTT_TIMER));
}
void
ar9300_attach_freebsd_ops(struct ath_hal *ah)
{
/* Global functions */
ah->ah_detach = ar9300_detach;
ah->ah_getRateTable = ar9300_get_rate_table;
/* Reset functions */
ah->ah_reset = ar9300_reset_freebsd;
ah->ah_phyDisable = ar9300_phy_disable;
ah->ah_disable = ar9300_disable;
ah->ah_configPCIE = ar9300_config_pcie_freebsd;
// ah->ah_disablePCIE = ar9300_disable_pcie_phy;
ah->ah_setPCUConfig = ar9300_set_pcu_config;
// perCalibration
ah->ah_perCalibrationN = ar9300_per_calibration_freebsd;
ah->ah_resetCalValid = ar9300_reset_cal_valid_freebsd;
ah->ah_setTxPowerLimit = ar9300_freebsd_set_tx_power_limit;
ah->ah_getChanNoise = ath_hal_getChanNoise;
/* Transmit functions */
ah->ah_setupTxQueue = ar9300_setup_tx_queue;
ah->ah_setTxQueueProps = ar9300_set_tx_queue_props;
ah->ah_getTxQueueProps = ar9300_get_tx_queue_props;
ah->ah_releaseTxQueue = ar9300_release_tx_queue;
ah->ah_resetTxQueue = ar9300_reset_tx_queue;
ah->ah_getTxDP = ar9300_get_tx_dp;
ah->ah_setTxDP = ar9300_set_tx_dp;
ah->ah_numTxPending = ar9300_num_tx_pending;
ah->ah_startTxDma = ar9300_start_tx_dma;
ah->ah_stopTxDma = ar9300_stop_tx_dma_freebsd;
ah->ah_setupTxDesc = ar9300_freebsd_setup_tx_desc;
ah->ah_setupXTxDesc = ar9300_freebsd_setup_x_tx_desc;
ah->ah_fillTxDesc = ar9300_freebsd_fill_tx_desc;
ah->ah_procTxDesc = ar9300_freebsd_proc_tx_desc;
ah->ah_getTxIntrQueue = ar9300_get_tx_intr_queue;
// reqTxIntrDesc
ah->ah_getTxCompletionRates = ar9300_freebsd_get_tx_completion_rates;
ah->ah_setTxDescLink = ar9300_set_desc_link;
ah->ah_getTxDescLink = ar9300_freebsd_get_desc_link;
ah->ah_getTxDescLinkPtr = ar9300_get_desc_link_ptr;
ah->ah_setupTxStatusRing = ar9300_setup_tx_status_ring;
ah->ah_getTxRawTxDesc = ar9300_get_raw_tx_desc;
ah->ah_updateTxTrigLevel = ar9300_update_tx_trig_level;
/* RX functions */
ah->ah_getRxDP = ar9300_get_rx_dp;
ah->ah_setRxDP = ar9300_set_rx_dp;
ah->ah_enableReceive = ar9300_enable_receive;
ah->ah_stopDmaReceive = ar9300_stop_dma_receive_freebsd;
ah->ah_startPcuReceive = ar9300_start_pcu_receive_freebsd;
ah->ah_stopPcuReceive = ar9300_stop_pcu_receive;
ah->ah_setMulticastFilter = ar9300_set_multicast_filter;
ah->ah_setMulticastFilterIndex = ar9300SetMulticastFilterIndex;
ah->ah_clrMulticastFilterIndex = ar9300ClrMulticastFilterIndex;
ah->ah_getRxFilter = ar9300_get_rx_filter;
ah->ah_setRxFilter = ar9300_set_rx_filter;
/* setupRxDesc */
ah->ah_procRxDesc = ar9300_proc_rx_desc_freebsd;
ah->ah_rxMonitor = ar9300_ani_rxmonitor_freebsd;
ah->ah_aniPoll = ar9300_ani_poll_freebsd;
ah->ah_procMibEvent = ar9300_process_mib_intr;
/* Misc functions */
ah->ah_getCapability = ar9300_get_capability;
ah->ah_setCapability = ar9300_set_capability;
ah->ah_getDiagState = ar9300_get_diag_state;
ah->ah_getMacAddress = ar9300_get_mac_address;
ah->ah_setMacAddress = ar9300_set_mac_address;
ah->ah_getBssIdMask = ar9300_get_bss_id_mask;
ah->ah_setBssIdMask = ar9300_set_bss_id_mask;
ah->ah_setRegulatoryDomain = ar9300_set_regulatory_domain;
ah->ah_setLedState = ar9300_set_led_state;
ah->ah_writeAssocid = ar9300_write_associd;
ah->ah_gpioCfgInput = ar9300_gpio_cfg_input;
ah->ah_gpioCfgOutput = ar9300_gpio_cfg_output;
ah->ah_gpioGet = ar9300_gpio_get;
ah->ah_gpioSet = ar9300_gpio_set;
ah->ah_gpioSetIntr = ar9300_gpio_set_intr;
/* polarity */
/* mask */
ah->ah_getTsf32 = ar9300_get_tsf32;
ah->ah_getTsf64 = ar9300_get_tsf64;
ah->ah_resetTsf = ar9300_reset_tsf;
ah->ah_detectCardPresent = ar9300_detect_card_present;
// ah->ah_updateMibCounters = ar9300_update_mib_counters;
ah->ah_getRfGain = ar9300_get_rfgain;
ah->ah_getDefAntenna = ar9300_get_def_antenna;
ah->ah_setDefAntenna = ar9300_set_def_antenna;
// ah->ah_getAntennaSwitch = ar9300_get_antenna_switch;
// ah->ah_setAntennaSwitch = ar9300_set_antenna_switch;
// ah->ah_setSifsTime = ar9300_set_sifs_time;
// ah->ah_getSifsTime = ar9300_get_sifs_time;
ah->ah_setSlotTime = ar9300_set_slot_time;
ah->ah_getSlotTime = ar9300GetSlotTime;
ah->ah_getAckTimeout = ar9300_get_ack_timeout;
ah->ah_setAckTimeout = ar9300_set_ack_timeout;
// XXX ack/ctsrate
// XXX CTS timeout
// XXX decompmask
// coverageclass
ah->ah_setQuiet = ar9300_set_quiet;
ah->ah_getMibCycleCounts = ar9300_freebsd_get_mib_cycle_counts;
/* DFS functions */
ah->ah_enableDfs = ar9300_enable_dfs;
ah->ah_getDfsThresh = ar9300_get_dfs_thresh;
ah->ah_getDfsDefaultThresh = ar9300_freebsd_get_dfs_default_thresh;
// procradarevent
ah->ah_isFastClockEnabled = ar9300_is_fast_clock_enabled;
ah->ah_get11nExtBusy = ar9300_get_11n_ext_busy;
/* Key cache functions */
ah->ah_getKeyCacheSize = ar9300_get_key_cache_size;
ah->ah_resetKeyCacheEntry = ar9300_reset_key_cache_entry;
ah->ah_isKeyCacheEntryValid = ar9300_is_key_cache_entry_valid;
ah->ah_setKeyCacheEntry = ar9300_set_key_cache_entry;
ah->ah_setKeyCacheEntryMac = ar9300_set_key_cache_entry_mac;
/* Power management functions */
ah->ah_setPowerMode = ar9300_set_power_mode;
ah->ah_getPowerMode = ar9300_get_power_mode;
/* Beacon functions */
/* ah_setBeaconTimers */
ah->ah_beaconInit = ar9300_freebsd_beacon_init;
/* ah_setBeaconTimers */
ah->ah_setStationBeaconTimers = ar9300_set_sta_beacon_timers;
/* ah_resetStationBeaconTimers */
/* ah_getNextTBTT */
ah->ah_getNextTBTT = ar9300_get_next_tbtt;
/* Interrupt functions */
ah->ah_isInterruptPending = ar9300_is_interrupt_pending;
ah->ah_getPendingInterrupts = ar9300_get_pending_interrupts_freebsd;
ah->ah_getInterrupts = ar9300_get_interrupts;
ah->ah_setInterrupts = ar9300_set_interrupts_freebsd;
/* Regulatory/internal functions */
// AH_PRIVATE(ah)->ah_getNfAdjust = ar9300_get_nf_adjust;
AH_PRIVATE(ah)->ah_eepromRead = ar9300_eeprom_read_word;
// AH_PRIVATE(ah)->ah_getChipPowerLimits = ar9300_get_chip_power_limits;
AH_PRIVATE(ah)->ah_getWirelessModes = ar9300_get_wireless_modes;
AH_PRIVATE(ah)->ah_getChannelEdges = ar9300_get_channel_edges;
AH_PRIVATE(ah)->ah_eepromRead = ar9300_eeprom_read_word;
/* XXX ah_eeprom */
/* XXX ah_eeversion */
/* XXX ah_eepromDetach */
/* XXX ah_eepromGet */
AH_PRIVATE(ah)->ah_eepromGet = ar9300_eeprom_get_freebsd;
/* XXX ah_eepromSet */
/* XXX ah_getSpurChan */
/* XXX ah_eepromDiag */
/* 802.11n functions */
ah->ah_chainTxDesc = ar9300_freebsd_chain_tx_desc;
ah->ah_setupFirstTxDesc= ar9300_freebsd_setup_first_tx_desc;
ah->ah_setupLastTxDesc = ar9300_freebsd_setup_last_tx_desc;
ah->ah_set11nRateScenario = ar9300_freebsd_set_11n_rate_scenario;
ah->ah_set11nTxDesc = ar9300_freebsd_setup_11n_desc;
ah->ah_set11nAggrFirst = ar9300_set_11n_aggr_first;
ah->ah_set11nAggrMiddle = ar9300_set_11n_aggr_middle;
ah->ah_set11nAggrLast = ar9300_set_11n_aggr_last;
ah->ah_clr11nAggr = ar9300_clr_11n_aggr;
ah->ah_set11nBurstDuration = ar9300_set_11n_burst_duration;
/* ah_get11nExtBusy */
ah->ah_set11nMac2040 = ar9300_set_11n_mac2040;
ah->ah_setChainMasks = ar9300SetChainMasks;
/* ah_get11nRxClear */
/* ah_set11nRxClear */
/* bluetooth coexistence functions */
ah->ah_btCoexSetInfo = ar9300_set_bt_coex_info;
ah->ah_btCoexSetConfig = ar9300_bt_coex_config;
ah->ah_btCoexSetQcuThresh = ar9300_bt_coex_set_qcu_thresh;
ah->ah_btCoexSetWeights = ar9300_bt_coex_set_weights;
ah->ah_btCoexSetBmissThresh = ar9300_bt_coex_setup_bmiss_thresh;
ah->ah_btCoexSetParameter = ar9300_bt_coex_set_parameter;
ah->ah_btCoexDisable = ar9300_bt_coex_disable;
ah->ah_btCoexEnable = ar9300_bt_coex_enable;
/* MCI bluetooth functions */
if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) {
ah->ah_btCoexSetWeights = ar9300_mci_bt_coex_set_weights;
ah->ah_btCoexDisable = ar9300_mci_bt_coex_disable;
ah->ah_btCoexEnable = ar9300_mci_bt_coex_enable;
}
ah->ah_btMciSetup = ar9300_mci_setup;
ah->ah_btMciSendMessage = ar9300_mci_send_message;
ah->ah_btMciGetInterrupt = ar9300_mci_get_interrupt;
ah->ah_btMciGetState = ar9300_mci_state;
ah->ah_btMciDetach = ar9300_mci_detach;
/* LNA diversity functions */
ah->ah_divLnaConfGet = ar9300_ant_div_comb_get_config;
ah->ah_divLnaConfSet = ar9300_ant_div_comb_set_config;
}
HAL_BOOL
ar9300_reset_freebsd(struct ath_hal *ah, HAL_OPMODE opmode,
struct ieee80211_channel *chan, HAL_BOOL bChannelChange,
HAL_STATUS *status)
{
HAL_BOOL r;
HAL_HT_MACMODE macmode;
struct ath_hal_private *ap = AH_PRIVATE(ah);
macmode =
IEEE80211_IS_CHAN_HT40(chan) ?
HAL_HT_MACMODE_2040 : HAL_HT_MACMODE_20;
r = ar9300_reset(ah, opmode, chan, macmode,
ap->ah_caps.halTxChainMask,
ap->ah_caps.halRxChainMask,
HAL_HT_EXTPROTSPACING_20, /* always 20Mhz channel spacing */
bChannelChange,
status,
AH_FALSE); /* XXX should really extend ath_hal_reset() */
return (r);
}
void
ar9300_config_pcie_freebsd(struct ath_hal *ah, HAL_BOOL restore,
HAL_BOOL powerOff)
{
ar9300_config_pci_power_save(ah, restore ? 1 : 0, powerOff ? 1 : 0);
}
/*
* This is a copy from ar9300_eeprom_get(), purely because the FreeBSD
* API is very silly and inconsistent.
*
* The AR93xx HAL doesn't call the eepromGetFlag() function, so this
* only occurs for FreeBSD code.
*
* When I fix this particular API, I'll undo this.
*/
HAL_STATUS
ar9300_eeprom_get_freebsd(struct ath_hal *ah, int param, void *val)
{
switch (param) {
case AR_EEP_FSTCLK_5G:
return HAL_OK;
default:
ath_hal_printf(ah, "%s: called, param=%d\n",
__func__, param);
return HAL_EIO;
}
}
HAL_BOOL
ar9300_stop_tx_dma_freebsd(struct ath_hal *ah, u_int q)
{
return ar9300_stop_tx_dma(ah, q, 1000);
}
void
ar9300_ani_poll_freebsd(struct ath_hal *ah,
const struct ieee80211_channel *chan)
{
HAL_NODE_STATS stats;
HAL_ANISTATS anistats;
OS_MEMZERO(&stats, sizeof(stats));
OS_MEMZERO(&anistats, sizeof(anistats));
ar9300_ani_ar_poll(ah, &stats, chan, &anistats);
}
/*
* Setup the configuration parameters in the style the AR9300 HAL
* wants.
*/
void
ar9300_config_defaults_freebsd(struct ath_hal *ah, HAL_OPS_CONFIG *ah_config)
{
/* Until FreeBSD's HAL does this by default - just copy */
OS_MEMCPY(&ah->ah_config, ah_config, sizeof(HAL_OPS_CONFIG));
ah->ah_config.ath_hal_enable_ani = AH_TRUE;
}
HAL_BOOL
ar9300_stop_dma_receive_freebsd(struct ath_hal *ah)
{
return ar9300_stop_dma_receive(ah, 1000);
}
HAL_BOOL
ar9300_get_pending_interrupts_freebsd(struct ath_hal *ah, HAL_INT *masked)
{
/* Non-MSI, so no MSI vector; and 'nortc' = 0 */
return ar9300_get_pending_interrupts(ah, masked, HAL_INT_LINE, 0, 0);
}
HAL_INT
ar9300_set_interrupts_freebsd(struct ath_hal *ah, HAL_INT ints)
{
/* nortc = 0 */
return ar9300_set_interrupts(ah, ints, 0);
}
HAL_BOOL
ar9300_per_calibration_freebsd(struct ath_hal *ah,
struct ieee80211_channel *chan, u_int rxchainmask, HAL_BOOL long_cal,
HAL_BOOL *isCalDone)
{
/* XXX fake scheduled calibrations for now */
u_int32_t sched_cals = 0xfffffff;
return ar9300_calibration(ah, chan,
AH_PRIVATE(ah)->ah_caps.halRxChainMask,
long_cal,
isCalDone,
0, /* is_scan */
&sched_cals);
}
HAL_BOOL
ar9300_reset_cal_valid_freebsd(struct ath_hal *ah,
const struct ieee80211_channel *chan)
{
HAL_BOOL is_cal_done = AH_TRUE;
ar9300_reset_cal_valid(ah, chan, &is_cal_done, 0xffffffff);
return (is_cal_done);
}
void
ar9300_start_pcu_receive_freebsd(struct ath_hal *ah)
{
/* is_scanning flag == NULL */
ar9300_start_pcu_receive(ah, AH_FALSE);
}
/*
* FreeBSD will just pass in the descriptor value as 'pa'.
* The Atheros HAL treats 'pa' as the physical address of the RX
* descriptor and 'bufaddr' as the physical address of the RX buffer.
* I'm not sure why they didn't collapse them - the AR9300 RX descriptor
* routine doesn't check 'pa'.
*/
HAL_STATUS
ar9300_proc_rx_desc_freebsd(struct ath_hal *ah, struct ath_desc *ds,
uint32_t pa, struct ath_desc *ds_next, uint64_t tsf,
struct ath_rx_status *rxs)
{
return (ar9300_proc_rx_desc_fast(ah, ds, 0, ds_next, rxs,
(void *) ds));
}
void
ar9300_ani_rxmonitor_freebsd(struct ath_hal *ah, const HAL_NODE_STATS *stats,
const struct ieee80211_channel *chan)
{
}
void
ar9300_freebsd_get_desc_link(struct ath_hal *ah, void *ds, uint32_t *link)
{
struct ar9300_txc *ads = AR9300TXC(ds);
(*link) = ads->ds_link;
}
/*
* TX descriptor field setting wrappers - eek.
*/
HAL_BOOL
ar9300_freebsd_setup_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int txPower,
u_int txRate0, u_int txTries0, u_int keyIx, u_int antMode, u_int flags,
u_int rtsctsRate, u_int rtsCtsDuration, u_int compicvLen,
u_int compivLen, u_int comp)
{
struct ath_hal_9300 *ahp = AH9300(ah);
HAL_KEY_TYPE keyType = 0; /* XXX No padding */
if (keyIx != HAL_TXKEYIX_INVALID)
keyType = ahp->ah_keytype[keyIx];
/* XXX bounds check keyix */
ar9300_set_11n_tx_desc(ah, ds, pktLen, type, txPower, keyIx,
keyType, flags);
return AH_TRUE;
}
HAL_BOOL
ar9300_freebsd_setup_x_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
u_int txRate1, u_int txTries1,
u_int txRate2, u_int txTries2,
u_int txRate3, u_int txTries3)
{
#if 0
ath_hal_printf(ah, "%s: called, 0x%x/%d, 0x%x/%d, 0x%x/%d\n",
__func__,
txRate1, txTries1,
txRate2, txTries2,
txRate3, txTries3);
#endif
/* XXX should only be called during probe */
return (AH_TRUE);
}
HAL_BOOL
ar9300_freebsd_fill_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
HAL_DMA_ADDR *bufListPtr, uint32_t *segLenPtr, u_int descId, u_int qid,
HAL_BOOL firstSeg, HAL_BOOL lastSeg,
const struct ath_desc *ds0)
{
HAL_KEY_TYPE keyType = 0;
const struct ar9300_txc *ads = AR9300TXC_CONST(ds0);
/*
* FreeBSD's HAL doesn't pass the keytype to fill_tx_desc();
* it's copied as part of the descriptor chaining.
*
* So, extract it from ds0.
*/
keyType = MS(ads->ds_ctl17, AR_encr_type);
return ar9300_fill_tx_desc(ah, ds, bufListPtr, segLenPtr, descId,
qid, keyType, firstSeg, lastSeg, ds0);
}
HAL_BOOL
ar9300_freebsd_get_tx_completion_rates(struct ath_hal *ah,
const struct ath_desc *ds0, int *rates, int *tries)
{
ath_hal_printf(ah, "%s: called\n", __func__);
return AH_FALSE; /* XXX for now */
}
/*
* 802.11n TX descriptor wrappers
*/
void
ar9300_freebsd_set_11n_rate_scenario(struct ath_hal *ah, struct ath_desc *ds,
u_int durUpdateEn, u_int rtsctsRate, HAL_11N_RATE_SERIES series[],
u_int nseries, u_int flags)
{
/* lastds=NULL, rtscts_duration is 0, smart antenna is 0 */
ar9300_set_11n_rate_scenario(ah, (void *) ds, (void *)ds, durUpdateEn,
rtsctsRate, 0, series, nseries, flags, 0);
}
/* chaintxdesc */
HAL_BOOL
ar9300_freebsd_chain_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
HAL_DMA_ADDR *bufLenList, uint32_t *segLenList,
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int keyIx,
HAL_CIPHER cipher, uint8_t numDelims,
HAL_BOOL firstSeg, HAL_BOOL lastSeg, HAL_BOOL lastAggr)
{
ath_hal_printf(ah, "%s: called\n", __func__);
return AH_FALSE;
}
/* setupfirsttxdesc */
HAL_BOOL
ar9300_freebsd_setup_first_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
u_int aggrLen, u_int flags, u_int txPower, u_int txRate0,
u_int txTries0, u_int antMode, u_int rtsctsRate, u_int rtsctsDuration)
{
ath_hal_printf(ah, "%s: called\n", __func__);
return AH_FALSE;
}
/* setuplasttxdesc */
/*
* This gets called but for now let's not log anything;
* it's only used to update the rate control information.
*/
HAL_BOOL
ar9300_freebsd_setup_last_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
const struct ath_desc *ds0)
{
// ath_hal_printf(ah, "%s: called\n", __func__);
return AH_FALSE;
}
void
ar9300_freebsd_setup_11n_desc(struct ath_hal *ah, void *ds, u_int pktLen,
HAL_PKT_TYPE type, u_int txPower, u_int keyIx, u_int flags)
{
ath_hal_printf(ah, "%s: called\n", __func__);
#if 0
struct ath_hal_9300 *ahp = AH9300(ah);
HAL_KEY_TYPE keyType = 0; /* XXX No padding */
if (keyIx != HAL_TXKEYIX_INVALID)
keyType = ahp->ah_keytype[keyIx];
/* XXX bounds check keyix */
ar9300_set_11n_tx_desc(ah, ds, pktLen, type, txPower, keyIx,
keyType, flags);
#endif
}
HAL_STATUS
ar9300_freebsd_proc_tx_desc(struct ath_hal *ah, struct ath_desc *ds,
struct ath_tx_status *ts)
{
return ar9300_proc_tx_desc(ah, ts);
}
void
ar9300_freebsd_beacon_init(struct ath_hal *ah, uint32_t next_beacon,
uint32_t beacon_period)
{
ar9300_beacon_init(ah, next_beacon, beacon_period, 0,
AH_PRIVATE(ah)->ah_opmode);
}
HAL_BOOL
ar9300_freebsd_get_mib_cycle_counts(struct ath_hal *ah,
HAL_SURVEY_SAMPLE *hs)
{
return (AH_FALSE);
}
HAL_BOOL
ar9300_freebsd_get_dfs_default_thresh(struct ath_hal *ah,
HAL_PHYERR_PARAM *pe)
{
/* XXX not yet */
return (AH_FALSE);
}
/*
* Clear multicast filter by index - from FreeBSD ar5212_recv.c
*/
static HAL_BOOL
ar9300ClrMulticastFilterIndex(struct ath_hal *ah, uint32_t ix)
{
uint32_t val;
if (ix >= 64)
return (AH_FALSE);
if (ix >= 32) {
val = OS_REG_READ(ah, AR_MCAST_FIL1);
OS_REG_WRITE(ah, AR_MCAST_FIL1, (val &~ (1<<(ix-32))));
} else {
val = OS_REG_READ(ah, AR_MCAST_FIL0);
OS_REG_WRITE(ah, AR_MCAST_FIL0, (val &~ (1<<ix)));
}
return AH_TRUE;
}
/*
* Set multicast filter by index - from FreeBSD ar5212_recv.c
*/
static HAL_BOOL
ar9300SetMulticastFilterIndex(struct ath_hal *ah, uint32_t ix)
{
uint32_t val;
if (ix >= 64)
return (AH_FALSE);
if (ix >= 32) {
val = OS_REG_READ(ah, AR_MCAST_FIL1);
OS_REG_WRITE(ah, AR_MCAST_FIL1, (val | (1<<(ix-32))));
} else {
val = OS_REG_READ(ah, AR_MCAST_FIL0);
OS_REG_WRITE(ah, AR_MCAST_FIL0, (val | (1<<ix)));
}
return (AH_TRUE);
}
/*
* RF attach stubs
*/
static HAL_BOOL
rf9330_attach(struct ath_hal *ah, HAL_STATUS *status)
{
(*status) = HAL_EINVAL;
return (AH_FALSE);
}
static HAL_BOOL
rf9330_probe(struct ath_hal *ah)
{
return (AH_FALSE);
}
AH_RF(RF9330, rf9330_probe, rf9330_attach);
Reference in New Issue View Git Blame Copy Permalink