freebsd-dev/sys/dev/cxgbe
Navdeep Parhar 3c25d4ea3c cxgbe(4): Ignore unused interrupts.
Sponsored by:	Chelsio Communications
2019-02-10 19:20:03 +00:00
..
common cxgbe(4): Ignore unused interrupts. 2019-02-10 19:20:03 +00:00
crypto Reject new sessions if the necessary queues aren't initialized. 2019-01-15 18:53:45 +00:00
cudbg cxgbe(4): Fix unsafe mailbox access in cudbg. 2017-11-21 01:18:58 +00:00
cxgbei Check for an allocation failure before dereferencing the pointer. 2018-11-26 22:42:52 +00:00
firmware cxgbe(4): Update T4/5/6 firmwares to 1.22.0.3. 2018-11-19 21:59:07 +00:00
iw_cxgbe cxgbe/iw_cxgbe: Fix an address calculation in the memory registration code that 2019-01-30 05:39:47 +00:00
tom Remove unused macros from t4_tom.h. 2018-12-21 20:46:45 +00:00
adapter.h cxgbe(4): Auto-dump the CIM block's logic analyzer on a TIMER0 interrupt. 2019-02-07 05:40:51 +00:00
if_cc.c cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will 2016-09-16 00:08:37 +00:00
if_ccv.c cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will 2016-09-16 00:08:37 +00:00
if_cxl.c
if_cxlv.c Chelsio T4/T5 VF driver. 2016-09-07 18:13:57 +00:00
offload.h cxgbe(4): Use two hashes instead of a table to keep track of 2018-08-15 03:03:01 +00:00
osdep.h cxgbe(4): Add adapter information to messages logged by the OS-agnostic 2019-01-29 00:49:12 +00:00
t4_clip.c cxgbe(4): Do not issue mbox commands after t4_fw_bye. 2018-12-19 19:21:29 +00:00
t4_clip.h Move CLIP table handling out of TOM and into the base driver. 2018-11-29 01:15:53 +00:00
t4_filter.c cxgbe(4): Clear the reply-pending status of a hashfilter when the reply 2019-01-20 23:30:16 +00:00
t4_if.m Use the port device name for the iov device for Chelsio T4/T5 cards. 2016-08-03 17:11:08 +00:00
t4_ioctl.h cxgbe(4): Allow "pass" filters to distribute matching traffic using a 2018-10-25 14:37:26 +00:00
t4_iov.c cxgbe(4): Update the VF device ids too. This should have been part 2017-05-05 16:52:25 +00:00
t4_l2t.c cxgbe(4): Reuse existing "switching" L2T entries when possible. 2018-09-22 01:24:30 +00:00
t4_l2t.h cxgbe(4): Reuse existing "switching" L2T entries when possible. 2018-09-22 01:24:30 +00:00
t4_main.c cxgbe(4): Delay the panic due to a fatal error by 30s. 2019-02-09 01:49:53 +00:00
t4_mp_ring.c cxgbe(4): Use fcmpset instead of cmpset when appropriate. 2018-08-23 16:24:27 +00:00
t4_mp_ring.h
t4_netmap.c cxgbe: revert r309725 2018-11-28 15:29:58 +00:00
t4_sched.c cxgbe(4): Make it clear that VI_INIT_DONE implies vi->ntxq > 0, and so 2018-08-21 21:42:17 +00:00
t4_sge.c cxgbe(4): Improved error reporting and diagnostics. 2019-02-01 20:42:49 +00:00
t4_smt.c cxgbe(4): Move all control queues to the adapter. 2018-08-11 21:10:08 +00:00
t4_smt.h cxgbe(4): Retire an old check. 2018-06-01 01:05:34 +00:00
t4_tracer.c sys/dev: further adoption of SPDX licensing ID tags. 2017-11-27 14:52:40 +00:00
t4_vf.c cxgbev(4): Initialize debug_flags from the environment like in the PF driver. 2019-02-08 03:31:38 +00:00