freebsd-dev/sys/dev/acpica/acpi_pci.c
Thomas Moestl 3920999db7 Add a new PCI interface method, assign_interrupt, to determine the
interrupt to be used for a device. This is intended solely for internal
use of PCI bus implementations, and exists so that PCI bus drivers
implementing special interrupt assignment methods which require
additional work at the bus level to work right can be easily derived
from the generic driver (or any other one) without resorting to hacks.

It will be used in the sparc64 ofw_pcibus driver, which will be
committed shortly.

Make use of this method in the generic implementation, and add it to
the method table of bus drivers derived from the PCI one.

Reviewed by:	imp, -hackers
2003-07-01 14:08:33 +00:00

237 lines
7.1 KiB
C

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000, BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include "acpi.h"
#include <dev/acpica/acpivar.h>
#include <sys/pciio.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include "pcib_if.h"
#include "pci_if.h"
/*
* Hooks for the ACPI CA debugging infrastructure
*/
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("PCI")
struct acpi_pci_devinfo {
struct pci_devinfo ap_dinfo;
ACPI_HANDLE ap_handle;
};
static int acpi_pci_probe(device_t dev);
static int acpi_pci_attach(device_t dev);
static int acpi_pci_read_ivar(device_t dev, device_t child, int which,
uintptr_t *result);
#if 0
static int acpi_pci_set_powerstate_method(device_t dev, device_t child,
int state);
static int acpi_pci_get_powerstate_method(device_t dev, device_t child);
#endif
static ACPI_STATUS acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level,
void *context, void **status);
static device_method_t acpi_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_pci_probe),
DEVMETHOD(device_attach, acpi_pci_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, pci_print_child),
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
DEVMETHOD(bus_read_ivar, acpi_pci_read_ivar),
DEVMETHOD(bus_write_ivar, pci_write_ivar),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource_list,pci_get_resource_list),
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_delete_resource, pci_delete_resource),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_child_pnpinfo_str, pci_child_pnpinfo_str_method),
DEVMETHOD(bus_child_location_str, pci_child_location_str_method),
/* PCI interface */
DEVMETHOD(pci_read_config, pci_read_config_method),
DEVMETHOD(pci_write_config, pci_write_config_method),
DEVMETHOD(pci_enable_busmaster, pci_enable_busmaster_method),
DEVMETHOD(pci_disable_busmaster, pci_disable_busmaster_method),
DEVMETHOD(pci_enable_io, pci_enable_io_method),
DEVMETHOD(pci_disable_io, pci_disable_io_method),
/* XXX: We should override these two. */
DEVMETHOD(pci_get_powerstate, pci_get_powerstate_method),
DEVMETHOD(pci_set_powerstate, pci_set_powerstate_method),
DEVMETHOD(pci_assign_interrupt, pci_assign_interrupt_method),
{ 0, 0 }
};
static driver_t acpi_pci_driver = {
"pci",
acpi_pci_methods,
0, /* no softc */
};
DRIVER_MODULE(acpi_pci, pcib, acpi_pci_driver, pci_devclass, 0, 0);
MODULE_VERSION(acpi_pci, 1);
MODULE_DEPEND(acpi_pci, pci, 1, 1, 1);
static int
acpi_pci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct acpi_pci_devinfo *dinfo;
switch (which) {
case ACPI_IVAR_HANDLE:
dinfo = device_get_ivars(child);
*result = (uintptr_t)dinfo->ap_handle;
return(0);
}
return(pci_read_ivar(dev, child, which, result));
}
#if 0
/*
* PCI power manangement
*/
static int
acpi_pci_set_powerstate_method(device_t dev, device_t child, int state)
{
/* XXX: TODO */
return (ENXIO);
}
static int
acpi_pci_get_powerstate_method(device_t dev, device_t child)
{
/* XXX: TODO */
return (ENXIO);
}
#endif
static ACPI_STATUS
acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level, void *context,
void **status)
{
struct acpi_pci_devinfo *dinfo;
device_t *devlist;
int devcount, i, func, slot;
UINT32 address;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
if (ACPI_FAILURE(acpi_EvaluateInteger(handle, "_ADR", &address)))
return_ACPI_STATUS(AE_OK);
slot = address >> 16;
func = address & 0xffff;
if (device_get_children((device_t)context, &devlist, &devcount) != 0)
return_ACPI_STATUS(AE_OK);
for (i = 0; i < devcount; i++) {
dinfo = device_get_ivars(devlist[i]);
if (dinfo->ap_dinfo.cfg.func == func &&
dinfo->ap_dinfo.cfg.slot == slot) {
dinfo->ap_handle = handle;
free(devlist, M_TEMP);
return_ACPI_STATUS(AE_OK);
}
}
free(devlist, M_TEMP);
return_ACPI_STATUS(AE_OK);
}
static int
acpi_pci_probe(device_t dev)
{
if (pcib_get_bus(dev) < 0)
return (ENXIO);
device_set_desc(dev, "ACPI PCI bus");
if (acpi_get_handle(dev) == NULL)
return (ENXIO);
return (0);
}
static int
acpi_pci_attach(device_t dev)
{
int busno;
/*
* Since there can be multiple independantly numbered PCI
* busses on some large alpha systems, we can't use the unit
* number to decide what bus we are probing. We ask the parent
* pcib what our bus number is.
*/
busno = pcib_get_bus(dev);
if (bootverbose)
device_printf(dev, "physical bus=%d\n", busno);
/*
* First, PCI devices are added as in the normal PCI bus driver.
* Afterwards, the ACPI namespace under the bridge driver is
* walked to save ACPI handles to all the devices that appear in
* the ACPI namespace as immediate descendants of the bridge.
*
* XXX: Sometimes PCI devices show up in the ACPI namespace that
* pci_add_children() doesn't find. We currently just ignore
* these devices.
*/
pci_add_children(dev, busno, sizeof(struct acpi_pci_devinfo));
(void) AcpiWalkNamespace(ACPI_TYPE_DEVICE, acpi_get_handle(dev), 1,
acpi_pci_save_handle, dev, NULL);
return (bus_generic_attach(dev));
}