freebsd-dev/sys/dev/tsec/if_tsec_fdt.c

391 lines
11 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (C) 2007-2008 Semihalf, Rafal Jaworowski
* Copyright (C) 2006-2007 Semihalf, Piotr Kruszynski
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* From: FreeBSD: head/sys/dev/tsec/if_tsec_ocp.c 188712 2009-02-17 14:59:47Z raj
*/
/*
* FDT 'simple-bus' attachment for Freescale TSEC controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/fdt/fdt_common.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include <dev/tsec/if_tsec.h>
#include <dev/tsec/if_tsecreg.h>
#include "miibus_if.h"
#define TSEC_RID_TXIRQ 0
#define TSEC_RID_RXIRQ 1
#define TSEC_RID_ERRIRQ 2
static int tsec_fdt_probe(device_t dev);
static int tsec_fdt_attach(device_t dev);
static int tsec_fdt_detach(device_t dev);
static int tsec_setup_intr(struct tsec_softc *sc, struct resource **ires,
void **ihand, int *irid, driver_intr_t handler, const char *iname);
static void tsec_release_intr(struct tsec_softc *sc, struct resource *ires,
void *ihand, int irid, const char *iname);
static device_method_t tsec_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, tsec_fdt_probe),
DEVMETHOD(device_attach, tsec_fdt_attach),
DEVMETHOD(device_detach, tsec_fdt_detach),
DEVMETHOD(device_shutdown, tsec_shutdown),
DEVMETHOD(device_suspend, tsec_suspend),
DEVMETHOD(device_resume, tsec_resume),
/* MII interface */
DEVMETHOD(miibus_readreg, tsec_miibus_readreg),
DEVMETHOD(miibus_writereg, tsec_miibus_writereg),
DEVMETHOD(miibus_statchg, tsec_miibus_statchg),
DEVMETHOD_END
};
static driver_t tsec_fdt_driver = {
"tsec",
tsec_methods,
sizeof(struct tsec_softc),
};
DRIVER_MODULE(tsec, simplebus, tsec_fdt_driver, 0, 0);
static int
tsec_fdt_probe(device_t dev)
{
struct tsec_softc *sc;
uint32_t id;
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_get_type(dev) == NULL ||
strcmp(ofw_bus_get_type(dev), "network") != 0)
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "gianfar") &&
!ofw_bus_is_compatible(dev, "fsl,etsec2"))
return (ENXIO);
sc = device_get_softc(dev);
/*
* Device trees with "fsl,etsec2" compatible nodes don't have a reg
* property, as it's been relegated to the queue-group children.
*/
if (ofw_bus_is_compatible(dev, "fsl,etsec2"))
sc->is_etsec = 1;
else {
sc->sc_rrid = 0;
sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
RF_ACTIVE);
if (sc->sc_rres == NULL)
return (ENXIO);
sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);
/* Check if we are eTSEC (enhanced TSEC) */
id = TSEC_READ(sc, TSEC_REG_ID);
sc->is_etsec = ((id >> 16) == TSEC_ETSEC_ID) ? 1 : 0;
id |= TSEC_READ(sc, TSEC_REG_ID2);
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
if (id == 0) {
device_printf(dev, "could not identify TSEC type\n");
return (ENXIO);
}
}
if (sc->is_etsec)
device_set_desc(dev, "Enhanced Three-Speed Ethernet Controller");
else
device_set_desc(dev, "Three-Speed Ethernet Controller");
return (BUS_PROBE_DEFAULT);
}
static int
tsec_fdt_attach(device_t dev)
{
struct tsec_softc *sc;
struct resource_list *rl;
phandle_t child, mdio, phy;
int acells, scells;
int error = 0;
sc = device_get_softc(dev);
sc->dev = dev;
sc->node = ofw_bus_get_node(dev);
if (fdt_addrsize_cells(sc->node, &acells, &scells) != 0) {
acells = 1;
scells = 1;
}
if (ofw_bus_is_compatible(dev, "fsl,etsec2")) {
rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
/*
* TODO: Add all children resources to the list. Will be
* required to support multigroup mode.
*/
child = OF_child(sc->node);
ofw_bus_reg_to_rl(dev, child, acells, scells, rl);
ofw_bus_intr_to_rl(dev, child, rl, NULL);
}
/* Get phy address from fdt */
if (OF_getencprop(sc->node, "phy-handle", &phy, sizeof(phy)) <= 0) {
device_printf(dev, "PHY not found in device tree");
return (ENXIO);
}
phy = OF_node_from_xref(phy);
mdio = OF_parent(phy);
OF_decode_addr(mdio, 0, &sc->phy_bst, &sc->phy_bsh, NULL);
OF_getencprop(phy, "reg", &sc->phyaddr, sizeof(sc->phyaddr));
/*
* etsec2 MDIO nodes are given the MDIO module base address, so we need
* to add the MII offset to get the PHY registers.
*/
if (ofw_bus_node_is_compatible(mdio, "fsl,etsec2-mdio"))
sc->phy_regoff = TSEC_REG_MIIBASE;
/* Init timer */
callout_init(&sc->tsec_callout, 1);
/* Init locks */
mtx_init(&sc->transmit_lock, device_get_nameunit(dev), "TSEC TX lock",
MTX_DEF);
mtx_init(&sc->receive_lock, device_get_nameunit(dev), "TSEC RX lock",
MTX_DEF);
mtx_init(&sc->ic_lock, device_get_nameunit(dev), "TSEC IC lock",
MTX_DEF);
/* Allocate IO memory for TSEC registers */
sc->sc_rrid = 0;
sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
RF_ACTIVE);
if (sc->sc_rres == NULL) {
device_printf(dev, "could not allocate IO memory range!\n");
goto fail1;
}
sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);
/* TSEC attach */
if (tsec_attach(sc) != 0) {
device_printf(dev, "could not be configured\n");
goto fail2;
}
/* Set up interrupts (TX/RX/ERR) */
sc->sc_transmit_irid = TSEC_RID_TXIRQ;
error = tsec_setup_intr(sc, &sc->sc_transmit_ires,
&sc->sc_transmit_ihand, &sc->sc_transmit_irid,
tsec_transmit_intr, "TX");
if (error)
goto fail2;
sc->sc_receive_irid = TSEC_RID_RXIRQ;
error = tsec_setup_intr(sc, &sc->sc_receive_ires,
&sc->sc_receive_ihand, &sc->sc_receive_irid,
tsec_receive_intr, "RX");
if (error)
goto fail3;
sc->sc_error_irid = TSEC_RID_ERRIRQ;
error = tsec_setup_intr(sc, &sc->sc_error_ires,
&sc->sc_error_ihand, &sc->sc_error_irid,
tsec_error_intr, "ERR");
if (error)
goto fail4;
return (0);
fail4:
tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
sc->sc_receive_irid, "RX");
fail3:
tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
sc->sc_transmit_irid, "TX");
fail2:
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
fail1:
mtx_destroy(&sc->receive_lock);
mtx_destroy(&sc->transmit_lock);
return (ENXIO);
}
static int
tsec_setup_intr(struct tsec_softc *sc, struct resource **ires, void **ihand,
int *irid, driver_intr_t handler, const char *iname)
{
int error;
*ires = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, irid, RF_ACTIVE);
if (*ires == NULL) {
device_printf(sc->dev, "could not allocate %s IRQ\n", iname);
return (ENXIO);
}
error = bus_setup_intr(sc->dev, *ires, INTR_TYPE_NET | INTR_MPSAFE,
NULL, handler, sc, ihand);
if (error) {
device_printf(sc->dev, "failed to set up %s IRQ\n", iname);
if (bus_release_resource(sc->dev, SYS_RES_IRQ, *irid, *ires))
device_printf(sc->dev, "could not release %s IRQ\n", iname);
*ires = NULL;
return (error);
}
return (0);
}
static void
tsec_release_intr(struct tsec_softc *sc, struct resource *ires, void *ihand,
int irid, const char *iname)
{
int error;
if (ires == NULL)
return;
error = bus_teardown_intr(sc->dev, ires, ihand);
if (error)
device_printf(sc->dev, "bus_teardown_intr() failed for %s intr"
", error %d\n", iname, error);
error = bus_release_resource(sc->dev, SYS_RES_IRQ, irid, ires);
if (error)
device_printf(sc->dev, "bus_release_resource() failed for %s "
"intr, error %d\n", iname, error);
}
static int
tsec_fdt_detach(device_t dev)
{
struct tsec_softc *sc;
int error;
sc = device_get_softc(dev);
/* Wait for stopping watchdog */
callout_drain(&sc->tsec_callout);
/* Stop and release all interrupts */
tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
sc->sc_transmit_irid, "TX");
tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
sc->sc_receive_irid, "RX");
tsec_release_intr(sc, sc->sc_error_ires, sc->sc_error_ihand,
sc->sc_error_irid, "ERR");
/* TSEC detach */
tsec_detach(sc);
/* Free IO memory handler */
if (sc->sc_rres) {
error = bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid,
sc->sc_rres);
if (error)
device_printf(dev, "bus_release_resource() failed for"
" IO memory, error %d\n", error);
}
/* Destroy locks */
mtx_destroy(&sc->receive_lock);
mtx_destroy(&sc->transmit_lock);
mtx_destroy(&sc->ic_lock);
return (0);
}
void
tsec_get_hwaddr(struct tsec_softc *sc, uint8_t *addr)
{
union {
uint32_t reg[2];
uint8_t addr[6];
} hw;
int i;
hw.reg[0] = hw.reg[1] = 0;
/* Retrieve the hardware address from the device tree. */
i = OF_getprop(sc->node, "local-mac-address", (void *)hw.addr, 6);
if (i == 6 && (hw.reg[0] != 0 || hw.reg[1] != 0)) {
bcopy(hw.addr, addr, 6);
return;
}
/* Also try the mac-address property, which is second-best */
i = OF_getprop(sc->node, "mac-address", (void *)hw.addr, 6);
if (i == 6 && (hw.reg[0] != 0 || hw.reg[1] != 0)) {
bcopy(hw.addr, addr, 6);
return;
}
/*
* Fall back -- use the currently programmed address in the hope that
* it was set be firmware...
*/
hw.reg[0] = TSEC_READ(sc, TSEC_REG_MACSTNADDR1);
hw.reg[1] = TSEC_READ(sc, TSEC_REG_MACSTNADDR2);
for (i = 0; i < 6; i++)
addr[5-i] = hw.addr[i];
}