freebsd-dev/sys/dts/arm/imx53x.dtsi
2017-11-14 21:03:57 +00:00

715 lines
17 KiB
Plaintext

/*
* Copyright (c) 2012 The FreeBSD Foundation
* Copyright (c) 2013 Rui Paulo
* All rights reserved.
*
* This software was developed by Semihalf under sponsorship from
* the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Freescale i.MX535 Device Tree Source.
*
* $FreeBSD$
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
soc = &SOC;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "ARM,MCIMX535";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x8000>;
i-cache-size = <0x8000>;
l2-cache-line-size = <32>;
l2-cache-line = <0x40000>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
localbus@0fffc000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* This reflects CPU decode windows setup. */
ranges;
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x00004000>;
};
/*
* 40000000 40000FFF 4K Debug ROM
* 40001000 40001FFF 4K ETB
* 40002000 40002FFF 4K ETM
* 40003000 40003FFF 4K TPIU
* 40004000 40004FFF 4K CTI0
* 40005000 40005FFF 4K CTI1
* 40006000 40006FFF 4K CTI2
* 40007000 40007FFF 4K CTI3
* 40008000 40008FFF 4K ARM Debug Unit
*
* 0FFFC000 0FFFCFFF 0x4000 TZIC
*/
};
SOC: soc@50000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&tzic>;
ranges;
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&tzic>;
ranges;
/* Required by many devices, so better to stay first */
/* 53FD4000 0x4000 CCM */
clock@53fd4000 {
compatible = "fsl,imx53-ccm";
/* 63F80000 0x4000 DPLLIP1 */
/* 63F84000 0x4000 DPLLIP2 */
/* 63F88000 0x4000 DPLLIP3 */
reg = <0x53fd4000 0x4000
0x63F80000 0x4000
0x63F84000 0x4000
0x63F88000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <71 72>;
status = "disabled";
};
/*
* GPIO modules moved up - to have it attached for
* drivers which rely on GPIO
*/
/* 53F84000 0x4000 GPIO1 */
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio";
reg = <0x53f84000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <50 51 42 43 44 45 46 47 48 49>;
/* TODO: use <> also */
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53F88000 0x4000 GPIO2 */
gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio";
reg = <0x53f88000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53F8C000 0x4000 GPIO3 */
gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio";
reg = <0x53f8c000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53F90000 0x4000 GPIO4 */
gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio";
reg = <0x53f90000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53FDC000 0x4000 GPIO5 */
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio";
reg = <0x53fdc000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53FE0000 0x4000 GPIO6 */
gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio";
reg = <0x53fe0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
/* 53FE4000 0x4000 GPIO5 */
gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio";
reg = <0x53fe4000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <107 108>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&tzic>;
ranges;
/* 50004000 0x4000 ESDHC 1 */
esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupt-parent = <&tzic>; interrupts = <1>;
status = "disabled";
};
/* 50008000 0x4000 ESDHC 2 */
esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupt-parent = <&tzic>; interrupts = <2>;
status = "disabled";
};
/* 5000C000 0x4000 UART 3 */
uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx-uart";
reg = <0x5000c000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <33>;
status = "disabled";
};
/* 50010000 0x4000 eCSPI1 */
ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi";
reg = <0x50010000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <36>;
status = "disabled";
};
/* 50014000 0x4000 SSI2 irq30 */
SSI2: ssi@50014000 {
compatible = "fsl,imx53-ssi";
reg = <0x50014000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <30>;
status = "disabled";
};
/* 50020000 0x4000 ESDHC 3 */
esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <3>;
status = "disabled";
};
/* 50024000 0x4000 ESDHC 4 */
esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <4>;
status = "disabled";
};
/* 50028000 0x4000 SPDIF */
/* 91 SPDIF */
pata@50030000 {
compatible = "fsl,imx53-ata";
reg = <0x50030000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <70>;
status = "disabled";
};
/* 50034000 0x4000 SLM */
/* 50038000 0x4000 HSI2C */
/* 64 HS-I2C */
/* 5003C000 0x4000 SPBA */
};
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
status = "okay";
};
usbphy1: usbphy@1 {
compatible = "usb-nop-xceiv";
status = "okay";
};
usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
status = "disabled";
};
usbmisc: usbmisc@53f80800 {
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
};
/* 53F98000 0x4000 WDOG1 */
wdog@53f98000 {
compatible = "fsl,imx53-wdt";
reg = <0x53f98000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <58>;
status = "disabled";
};
/* 53F9C000 0x4000 WDOG2 (TZ) */
wdog@53f9c000 {
compatible = "fsl,imx53-wdt";
reg = <0x53f9c000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <59>;
status = "disabled";
};
/* 53F94000 0x4000 KPP */
keyboard@53f94000 {
compatible = "fsl,imx53-kpp";
reg = <0x53f94000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <60>;
status = "disabled";
};
/* 53FA0000 0x4000 GPT */
timer@53fa0000 {
compatible = "fsl,imx53-gpt";
reg = <0x53fa0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <39>;
status = "disabled";
};
/* 53FA4000 0x4000 SRTC */
rtc@53fa4000 {
compatible = "fsl,imx53-srtc";
reg = <0x53fa4000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <24 25>;
status = "disabled";
};
/* 53FA8000 0x4000 IOMUXC */
iomux@53fa8000 {
compatible = "fsl,imx53-iomux";
reg = <0x53fa8000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <7>;
};
/* 53FAC000 0x4000 EPIT1 */
epit1: timer@53fac000 {
compatible = "fsl,imx53-epit";
reg = <0x53fac000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <40>;
status = "disabled";
};
/* 53FB0000 0x4000 EPIT2 */
epit2: timer@53fb0000 {
compatible = "fsl,imx53-epit";
reg = <0x53fb0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <41>;
status = "disabled";
};
/* 53FB4000 0x4000 PWM1 */
pwm@53fb4000 {
compatible = "fsl,imx53-pwm";
reg = <0x53fb4000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <61>;
status = "disabled";
};
/* 53FB8000 0x4000 PWM2 */
pwm@53fb8000 {
compatible = "fsl,imx53-pwm";
reg = <0x53fb8000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <94>;
status = "disabled";
};
/* 53FBC000 0x4000 UART 1 */
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx-uart";
reg = <0x53fbc000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <31>;
status = "disabled";
};
/* 53FC0000 0x4000 UART 2 */
uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx-uart";
reg = <0x53fc0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <32>;
status = "disabled";
};
/* 53FF0000 0x4000 UART 4 */
uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx-uart";
reg = <0x53ff0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <13>;
status = "disabled";
};
/* 53FD0000 0x4000 SRC */
reset@53fd0000 {
compatible = "fsl,imx53-src";
reg = <0x53fd0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <75>;
status = "disabled";
};
/* 53FD8000 0x4000 GPC */
power@53fd8000 {
compatible = "fsl,imx53-gpc";
reg = <0x53fd8000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <73 74>;
status = "disabled";
};
i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c",
"fsl,imx-i2c";
reg = <0x53fec000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <64>;
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&tzic>;
ranges;
/* 63F90000 0x4000 UART 5 */
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx-uart";
reg = <0x63f90000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <32>;
status = "disabled";
};
/* 63F94000 0x4000 AHBMAX */
/* 63F98000 0x4000 IIM */
/*
* 69 IIM Interrupt request to the processor.
* Indicates to the processor that program or
* explicit.
*/
/* 63F9C000 0x4000 CSU */
/*
* 27 CSU Interrupt Request 1. Indicates to the
* processor that one or more alarm inputs were.
*/
/* 63FA0000 0x4000 TIGERP_PLATFORM_NE_32K_256K */
/* irq76 Neon Monitor Interrupt */
/* irq77 Performance Unit Interrupt */
/* irq78 CTI IRQ */
/* irq79 Debug Interrupt, Cross-Trigger Interface 1 */
/* irq80 Debug Interrupt, Cross-Trigger Interface 1 */
/* irq89 Debug Interrupt, Cross-Trigger Interface 2 */
/* irq98 Debug Interrupt, Cross-Trigger Interface 3 */
/* 63FA4000 0x4000 OWIRE irq88 */
/* 63FA8000 0x4000 FIRI irq93 */
/* 63FAC000 0x4000 eCSPI2 */
ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi";
reg = <0x63fac000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <37>;
status = "disabled";
};
/* 63FB0000 0x4000 SDMA */
sdma@63fb0000 {
compatible = "fsl,imx53-sdma";
reg = <0x63fb0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <6>;
};
/* 63FB4000 0x4000 SCC */
/* 21 SCC Security Monitor High Priority Interrupt. */
/* 22 SCC Secure (TrustZone) Interrupt. */
/* 23 SCC Regular (Non-Secure) Interrupt. */
/* 63FB8000 0x4000 ROMCP */
/* 63FBC000 0x4000 RTIC */
/*
* 26 RTIC RTIC (Trust Zone) Interrupt Request.
* Indicates that the RTIC has completed hashing the
*/
/* 63FC0000 0x4000 CSPI */
cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi";
reg = <0x63fc0000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <38>;
status = "disabled";
};
/* 63FC4000 0x4000 I2C2 */
i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c", "fsl,imx-i2c";
reg = <0x63fc4000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <63>;
status = "disabled";
};
/* 63FC8000 0x4000 I2C1 */
i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx1-i2c", "fsl,imx-i2c";
reg = <0x63fc8000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <62>;
status = "disabled";
};
/* 63FCC000 0x4000 SSI1 */
/* 29 SSI1 SSI-1 Interrupt Request */
SSI1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi";
reg = <0x63fcc000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <29>;
status = "disabled";
};
/* 63FD0000 0x4000 AUDMUX */
audmux@63fd4000 {
compatible = "fsl,imx53-audmux";
reg = <0x63fd4000 0x4000>;
status = "disabled";
};
/* 63FD8000 0x4000 EXTMC */
/* 8 EXTMC (NFC) */
/* 15 EXTMC */
/* 97 EXTMC Boot sequence completed interrupt */
/*
* 101 EMI Indicates all pages have been transferred
* to NFC during an auto program operation.
*/
/* 83FE4000 0x4000 SIM */
/* 67 SIM intr composed of oef, xte, sdi1, and sdi0 */
/* 68 SIM intr composed of tc, etc, tfe, and rdrf */
/* 63FD_C000 0x4000 apb2ip_pl301_2x2 */
/* 63FE_0000 0x4000 apb2ip_pl301_4x1 */
/* 63FE4000 0x4000 MLB */
/* 63FE8000 0x4000 SSI3 */
/* 96 SSI3 SSI-3 Interrupt Request */
SSI3: ssi@63fe8000 {
compatible = "fsl,imx51-ssi";
reg = <0x63fe8000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <96>;
status = "disabled";
};
/* 63FEC000 0x4000 FEC */
ethernet@63fec000 {
compatible = "fsl,imx53-fec";
reg = <0x63fec000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <87>;
status = "disabled";
};
/* 63FF0000 0x4000 TVE */
/* 92 TVE */
/* 63FF4000 0x4000 VPU */
/* 9 VPU */
/* 100 VPU Idle interrupt from VPU */
/* 63FF8000 0x4000 SAHARA */
/* 19 SAHARA SAHARA host 0 (TrustZone) Intr */
/* 20 SAHARA SAHARA host 1 (non-TrustZone) Intr */
};
};
localbus@10000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sata@10000000 {
compatible = "fsl,imx53-ata";
reg = <0x10000000 0x4000>;
interrupt-parent = <&tzic>;
interrupts = <28>;
status = "disabled";
};
vga: ipu3@1E000000 {
compatible = "fsl,ipu3";
reg = <
0x1E000000 0x08000 /* CM */
0x1E008000 0x08000 /* IDMAC */
0x1E018000 0x08000 /* DP */
0x1E020000 0x08000 /* IC */
0x1E028000 0x08000 /* IRT */
0x1E030000 0x08000 /* CSI0 */
0x1E038000 0x08000 /* CSI1 */
0x1E040000 0x08000 /* DI0 */
0x1E048000 0x08000 /* DI1 */
0x1E050000 0x08000 /* SMFC */
0x1E058000 0x08000 /* DC */
0x1E060000 0x08000 /* DMFC */
0x1E068000 0x08000 /* VDI */
0x1F000000 0x20000 /* CPMEM */
0x1F020000 0x20000 /* LUT */
0x1F040000 0x20000 /* SRM */
0x1F060000 0x20000 /* TPM */
0x1F080000 0x20000 /* DCTMPL */
>;
interrupt-parent = <&tzic>;
interrupts = <
10 /* IPUEX Error */
11 /* IPUEX Sync */
>;
status = "disabled";
};
};
};
/*
TODO: Not mapped interrupts
5 DAP
84 GPU2D (OpenVG) general interrupt
85 GPU2D (OpenVG) busy signal (for S/W power gating feasibility)
12 GPU3D
102 GPU3D Idle interrupt from GPU3D (for S/W power gating)
90 SJC
*/