freebsd-dev/etc/etc.riscv/ttys
Ruslan Bukin 1fdcc5e5c0 Start support for the RISC-V 64-bit architecture developed by UC Berkeley.
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.

This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.

The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.

Reviewed by:	andrew, bdrewery, emaste, imp
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
Differential Revision:	https://reviews.freebsd.org/D4445
2015-12-11 22:55:23 +00:00

52 lines
2.1 KiB
Plaintext

#
# $FreeBSD$
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is typically xterm.
# Other common values include dialup for incoming modem ports, and
# unknown when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off secure
#
ttyv0 "/usr/libexec/getty Pc" xterm onifconsole secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" xterm off secure
ttyv2 "/usr/libexec/getty Pc" xterm off secure
ttyv3 "/usr/libexec/getty Pc" xterm off secure
ttyv4 "/usr/libexec/getty Pc" xterm off secure
ttyv5 "/usr/libexec/getty Pc" xterm off secure
ttyv6 "/usr/libexec/getty Pc" xterm off secure
ttyv7 "/usr/libexec/getty Pc" xterm off secure
#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure
# RISC-V HTIF console
rcons "/usr/libexec/getty std.9600" vt100 onifconsole secure