It's now possible to use Broadcom functions to read the I/O registers of SDIO card. The functions were copied from the BSD-licensed Broadcom Linux driver as-is. To make it possible, a small Linux compatibility layer was introduced. Currently the card responds with the correct version number ("magic") when reading the corresponding address. Approved by: imp (mentor) Differential Revision: https://reviews.freebsd.org/D12111
161 lines
5.2 KiB
C
161 lines
5.2 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#define SDIO_FUNC_0 0
|
|
#define SDIO_FUNC_1 1
|
|
#define SDIO_FUNC_2 2
|
|
|
|
#define SDIOD_FBR_SIZE 0x100
|
|
|
|
/* io_en */
|
|
#define SDIO_FUNC_ENABLE_1 0x02
|
|
#define SDIO_FUNC_ENABLE_2 0x04
|
|
|
|
/* io_rdys */
|
|
#define SDIO_FUNC_READY_1 0x02
|
|
#define SDIO_FUNC_READY_2 0x04
|
|
|
|
/* intr_status */
|
|
#define INTR_STATUS_FUNC1 0x2
|
|
#define INTR_STATUS_FUNC2 0x4
|
|
|
|
/* Maximum number of I/O funcs */
|
|
#define SDIOD_MAX_IOFUNCS 7
|
|
|
|
/* mask of register map */
|
|
#define REG_F0_REG_MASK 0x7FF
|
|
#define REG_F1_MISC_MASK 0x1FFFF
|
|
|
|
/* as of sdiod rev 0, supports 3 functions */
|
|
#define SBSDIO_NUM_FUNCTION 3
|
|
|
|
/* function 0 vendor specific CCCR registers */
|
|
#define SDIO_CCCR_BRCM_CARDCAP 0xf0
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08
|
|
#define SDIO_CCCR_BRCM_CARDCTRL 0xf1
|
|
#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02
|
|
#define SDIO_CCCR_BRCM_SEPINT 0xf2
|
|
|
|
#define SDIO_SEPINT_MASK 0x01
|
|
#define SDIO_SEPINT_OE 0x02
|
|
#define SDIO_SEPINT_ACT_HI 0x04
|
|
|
|
/* function 1 miscellaneous registers */
|
|
|
|
/* sprom command and status */
|
|
#define SBSDIO_SPROM_CS 0x10000
|
|
/* sprom info register */
|
|
#define SBSDIO_SPROM_INFO 0x10001
|
|
/* sprom indirect access data byte 0 */
|
|
#define SBSDIO_SPROM_DATA_LOW 0x10002
|
|
/* sprom indirect access data byte 1 */
|
|
#define SBSDIO_SPROM_DATA_HIGH 0x10003
|
|
/* sprom indirect access addr byte 0 */
|
|
#define SBSDIO_SPROM_ADDR_LOW 0x10004
|
|
/* gpio select */
|
|
#define SBSDIO_GPIO_SELECT 0x10005
|
|
/* gpio output */
|
|
#define SBSDIO_GPIO_OUT 0x10006
|
|
/* gpio enable */
|
|
#define SBSDIO_GPIO_EN 0x10007
|
|
/* rev < 7, watermark for sdio device */
|
|
#define SBSDIO_WATERMARK 0x10008
|
|
/* control busy signal generation */
|
|
#define SBSDIO_DEVICE_CTL 0x10009
|
|
|
|
/* SB Address Window Low (b15) */
|
|
#define SBSDIO_FUNC1_SBADDRLOW 0x1000A
|
|
/* SB Address Window Mid (b23:b16) */
|
|
#define SBSDIO_FUNC1_SBADDRMID 0x1000B
|
|
/* SB Address Window High (b31:b24) */
|
|
#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C
|
|
/* Frame Control (frame term/abort) */
|
|
#define SBSDIO_FUNC1_FRAMECTRL 0x1000D
|
|
/* ChipClockCSR (ALP/HT ctl/status) */
|
|
#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E
|
|
/* SdioPullUp (on cmd, d0-d2) */
|
|
#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F
|
|
/* Write Frame Byte Count Low */
|
|
#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019
|
|
/* Write Frame Byte Count High */
|
|
#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A
|
|
/* Read Frame Byte Count Low */
|
|
#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B
|
|
/* Read Frame Byte Count High */
|
|
#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
|
|
/* MesBusyCtl (rev 11) */
|
|
#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D
|
|
/* Sdio Core Rev 12 */
|
|
#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E
|
|
#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1
|
|
#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0
|
|
#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2
|
|
#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1
|
|
#define SBSDIO_FUNC1_SLEEPCSR 0x1001F
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1
|
|
#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2
|
|
#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1
|
|
|
|
#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
|
|
#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */
|
|
|
|
/* function 1 OCP space */
|
|
|
|
/* sb offset addr is <= 15 bits, 32k */
|
|
#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF
|
|
#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
|
|
/* with b15, maps to 32-bit SB access */
|
|
#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000
|
|
|
|
/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
|
|
|
|
#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
|
|
#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
|
|
#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
|
|
/* Address bits from SBADDR regs */
|
|
#define SBSDIO_SBWINDOW_MASK 0xffff8000
|
|
|
|
#define SDIOH_READ 0 /* Read request */
|
|
#define SDIOH_WRITE 1 /* Write request */
|
|
|
|
#define SDIOH_DATA_FIX 0 /* Fixed addressing */
|
|
#define SDIOH_DATA_INC 1 /* Incremental addressing */
|
|
|
|
/* internal return code */
|
|
#define SUCCESS 0
|
|
#define ERROR 1
|
|
|
|
/* Packet alignment for most efficient SDIO (can change based on platform) */
|
|
#define BRCMF_SDALIGN (1 << 6)
|
|
|
|
/**
|
|
* enum brcmf_sdiod_state - the state of the bus.
|
|
*
|
|
* @BRCMF_SDIOD_DOWN: Device can be accessed, no DPC.
|
|
* @BRCMF_SDIOD_DATA: Ready for data transfers, DPC enabled.
|
|
* @BRCMF_SDIOD_NOMEDIUM: No medium access to dongle possible.
|
|
*/
|
|
enum brcmf_sdiod_state {
|
|
BRCMF_SDIOD_DOWN,
|
|
BRCMF_SDIOD_DATA,
|
|
BRCMF_SDIOD_NOMEDIUM
|
|
};
|