freebsd-dev/sys/dev/hyperv/vmbus/vmbus_chanvar.h
Sepherosa Ziehau b99113a1c1 hyperv/vmbus: Add channel polling support.
MFC after:	1 week
Sponsored by:	Microsoft
Differential Revision:	https://reviews.freebsd.org/D8738
2016-12-12 05:04:55 +00:00

190 lines
5.8 KiB
C

/*-
* Copyright (c) 2016 Microsoft Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _VMBUS_CHANVAR_H_
#define _VMBUS_CHANVAR_H_
#include <sys/param.h>
#include <sys/callout.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/queue.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/taskqueue.h>
#include <dev/hyperv/include/hyperv.h>
#include <dev/hyperv/include/hyperv_busdma.h>
#include <dev/hyperv/include/vmbus.h>
#include <dev/hyperv/vmbus/vmbus_brvar.h>
struct vmbus_channel {
/*
* NOTE:
* Fields before ch_txbr are only accessed on this channel's
* target CPU.
*/
uint32_t ch_flags; /* VMBUS_CHAN_FLAG_ */
int ch_poll_flags; /* callout flags */
/*
* RX bufring; immediately following ch_txbr.
*/
struct vmbus_rxbr ch_rxbr;
struct taskqueue *ch_tq;
struct task ch_task;
struct task ch_poll_task;
sbintime_t ch_poll_intvl;
struct callout ch_poll_timeo;
vmbus_chan_callback_t ch_cb;
void *ch_cbarg;
/*
* TX bufring; at the beginning of ch_bufring.
*
* NOTE:
* Put TX bufring and the following MNF/evtflag to a new
* cacheline, since they will be accessed on all CPUs by
* locking ch_txbr first.
*
* XXX
* TX bufring and following MNF/evtflags do _not_ fit in
* one 64B cacheline.
*/
struct vmbus_txbr ch_txbr __aligned(CACHE_LINE_SIZE);
uint32_t ch_txflags; /* VMBUS_CHAN_TXF_ */
/*
* These are based on the vmbus_chanmsg_choffer.chm_montrig.
* Save it here for easy access.
*/
uint32_t ch_montrig_mask;/* MNF trig mask */
volatile uint32_t *ch_montrig; /* MNF trigger loc. */
/*
* These are based on the vmbus_chanmsg_choffer.chm_chanid.
* Save it here for easy access.
*/
u_long ch_evtflag_mask;/* event flag */
volatile u_long *ch_evtflag; /* event flag loc. */
/*
* Rarely used fields.
*/
struct hyperv_mon_param *ch_monprm;
struct hyperv_dma ch_monprm_dma;
uint32_t ch_id; /* channel id */
device_t ch_dev;
struct vmbus_softc *ch_vmbus;
int ch_cpuid; /* owner cpu */
/*
* Virtual cpuid for ch_cpuid; it is used to communicate cpuid
* related information w/ Hyper-V. If MSR_HV_VP_INDEX does not
* exist, ch_vcpuid will always be 0 for compatibility.
*/
uint32_t ch_vcpuid;
/*
* If this is a primary channel, ch_subchan* fields
* contain sub-channels belonging to this primary
* channel.
*/
struct mtx ch_subchan_lock;
TAILQ_HEAD(, vmbus_channel) ch_subchans;
int ch_subchan_cnt;
/* If this is a sub-channel */
TAILQ_ENTRY(vmbus_channel) ch_sublink; /* sub-channel link */
struct vmbus_channel *ch_prichan; /* owner primary chan */
void *ch_bufring; /* TX+RX bufrings */
struct hyperv_dma ch_bufring_dma;
uint32_t ch_bufring_gpadl;
struct task ch_attach_task; /* run in ch_mgmt_tq */
struct task ch_detach_task; /* run in ch_mgmt_tq */
struct taskqueue *ch_mgmt_tq;
/* If this is a primary channel */
TAILQ_ENTRY(vmbus_channel) ch_prilink; /* primary chan link */
TAILQ_ENTRY(vmbus_channel) ch_link; /* channel link */
uint32_t ch_subidx; /* subchan index */
volatile uint32_t ch_stflags; /* atomic-op */
/* VMBUS_CHAN_ST_ */
struct hyperv_guid ch_guid_type;
struct hyperv_guid ch_guid_inst;
struct sx ch_orphan_lock;
struct vmbus_xact_ctx *ch_orphan_xact;
int ch_refs;
struct sysctl_ctx_list ch_sysctl_ctx;
} __aligned(CACHE_LINE_SIZE);
#define VMBUS_CHAN_ISPRIMARY(chan) ((chan)->ch_subidx == 0)
/*
* If this flag is set, this channel's interrupt will be masked in ISR,
* and the RX bufring will be drained before this channel's interrupt is
* unmasked.
*
* This flag is turned on by default. Drivers can turn it off according
* to their own requirement.
*/
#define VMBUS_CHAN_FLAG_BATCHREAD 0x0002
#define VMBUS_CHAN_TXF_HASMNF 0x0001
#define VMBUS_CHAN_ST_OPENED_SHIFT 0
#define VMBUS_CHAN_ST_ONPRIL_SHIFT 1
#define VMBUS_CHAN_ST_ONSUBL_SHIFT 2
#define VMBUS_CHAN_ST_ONLIST_SHIFT 3
#define VMBUS_CHAN_ST_REVOKED_SHIFT 4 /* sticky */
#define VMBUS_CHAN_ST_OPENED (1 << VMBUS_CHAN_ST_OPENED_SHIFT)
#define VMBUS_CHAN_ST_ONPRIL (1 << VMBUS_CHAN_ST_ONPRIL_SHIFT)
#define VMBUS_CHAN_ST_ONSUBL (1 << VMBUS_CHAN_ST_ONSUBL_SHIFT)
#define VMBUS_CHAN_ST_ONLIST (1 << VMBUS_CHAN_ST_ONLIST_SHIFT)
#define VMBUS_CHAN_ST_REVOKED (1 << VMBUS_CHAN_ST_REVOKED_SHIFT)
struct vmbus_softc;
struct vmbus_message;
void vmbus_event_proc(struct vmbus_softc *, int);
void vmbus_event_proc_compat(struct vmbus_softc *, int);
void vmbus_chan_msgproc(struct vmbus_softc *,
const struct vmbus_message *);
void vmbus_chan_destroy_all(struct vmbus_softc *);
#endif /* !_VMBUS_CHANVAR_H_ */