d3109d3971
the kernel itself: If building for the same architecture as the build host,
the kernel build assumes that the host toolchain is capable of building the
kernel. If it's not, "make kernel-toolchain" will bootstrap a new set of
tools that will work.
With this change the same assumptions are made for building kernel tools,
and the existing host toolchain is used to do the build (notably, the build
doesn't link the tools with the legacy libraries, which may not even exist).
If ever for some reason the host toolchain isn't capable of building the
kernel tools, then doing a "make kernel-toolchain" will bootstrap newer
tools to get the job done.
So when built as part of buildworld or kernel-toolchain, the kernel tools
are built using the XMAKE (via BMAKE) commands and environment. When built
as part of building just the kernel on a same-target host, the tools are
built using the new KTMAKE commands and environment. What doesn't jump
out at you in the diffs is that the difference between BMAKE and KTMAKE
is that BMAKE contains this magic line which changes how the build is done
because it changes what files get included for .include <bsd.prog.mk> and
other standard includes:
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
and KTMAKE doesn't, and contains this instead:
TOOLS_PREFIX=${WORLDTMP}
Hopefully this brings the "how to build aicasm with the right toolchain"
saga to a conclusion that works in all usage scenarios that have
historically been supported.
1991 lines
60 KiB
Makefile
1991 lines
60 KiB
Makefile
#
|
|
# $FreeBSD$
|
|
#
|
|
# Make command line options:
|
|
# -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
|
|
# -DNO_CLEAN do not clean at all
|
|
# -DDB_FROM_SRC use the user/group databases in src/etc instead of
|
|
# the system database when installing.
|
|
# -DNO_SHARE do not go into share subdir
|
|
# -DKERNFAST define NO_KERNEL{CONFIG,CLEAN,DEPEND,OBJ}
|
|
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
|
|
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
|
|
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
|
|
# -DNO_KERNELOBJ do not run ${MAKE} obj in ${MAKE} buildkernel
|
|
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
|
|
# -DNO_ROOT install without using root privilege
|
|
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
|
|
# -DNO_CTF do not run the DTrace CTF conversion tools on built objects
|
|
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
|
|
# LOCAL_LIB_DIRS="list of dirs" to add additional dirs to libraries target
|
|
# LOCAL_MTREE="list of mtree files" to process to allow local directories
|
|
# to be created before files are installed
|
|
# LOCAL_TOOL_DIRS="list of dirs" to add additional dirs to the build-tools
|
|
# list
|
|
# METALOG="path to metadata log" to write permission and ownership
|
|
# when NO_ROOT is set. (default: ${DESTDIR}/METALOG)
|
|
# TARGET="machine" to crossbuild world for a different machine type
|
|
# TARGET_ARCH= may be required when a TARGET supports multiple endians
|
|
# BUILDENV_SHELL= shell to launch for the buildenv target (def:/bin/sh)
|
|
# WORLD_FLAGS= additional flags to pass to make(1) during buildworld
|
|
# KERNEL_FLAGS= additional flags to pass to make(1) during buildkernel
|
|
|
|
#
|
|
# The intended user-driven targets are:
|
|
# buildworld - rebuild *everything*, including glue to help do upgrades
|
|
# installworld- install everything built by "buildworld"
|
|
# doxygen - build API documentation of the kernel
|
|
# update - convenient way to update your source tree (eg: svn/svnup)
|
|
#
|
|
# Standard targets (not defined here) are documented in the makefiles in
|
|
# /usr/share/mk. These include:
|
|
# obj depend all install clean cleandepend cleanobj
|
|
|
|
.if !defined(TARGET) || !defined(TARGET_ARCH)
|
|
.error "Both TARGET and TARGET_ARCH must be defined."
|
|
.endif
|
|
|
|
.include <bsd.own.mk>
|
|
.include <bsd.arch.inc.mk>
|
|
.include <bsd.compiler.mk>
|
|
|
|
# We must do share/info early so that installation of info `dir'
|
|
# entries works correctly. Do it first since it is less likely to
|
|
# grow dependencies on include and lib than vice versa.
|
|
#
|
|
# We must do lib/ and libexec/ before bin/, because if installworld
|
|
# installs a new /bin/sh, the 'make' command will *immediately*
|
|
# use that new version. And the new (dynamically-linked) /bin/sh
|
|
# will expect to find appropriate libraries in /lib and /libexec.
|
|
#
|
|
SRCDIR?= ${.CURDIR}
|
|
.if defined(SUBDIR_OVERRIDE)
|
|
SUBDIR= ${SUBDIR_OVERRIDE}
|
|
.else
|
|
SUBDIR= share/info lib libexec
|
|
SUBDIR+=bin
|
|
.if ${MK_GAMES} != "no"
|
|
SUBDIR+=games
|
|
.endif
|
|
.if ${MK_CDDL} != "no"
|
|
SUBDIR+=cddl
|
|
.endif
|
|
SUBDIR+=gnu include
|
|
.if ${MK_KERBEROS} != "no"
|
|
SUBDIR+=kerberos5
|
|
.endif
|
|
.if ${MK_RESCUE} != "no"
|
|
SUBDIR+=rescue
|
|
.endif
|
|
SUBDIR+=sbin
|
|
.if ${MK_CRYPT} != "no"
|
|
SUBDIR+=secure
|
|
.endif
|
|
.if !defined(NO_SHARE)
|
|
SUBDIR+=share
|
|
.endif
|
|
SUBDIR+=sys usr.bin usr.sbin
|
|
.if ${MK_TESTS} != "no"
|
|
SUBDIR+= tests
|
|
.endif
|
|
.if ${MK_OFED} != "no"
|
|
SUBDIR+=contrib/ofed
|
|
.endif
|
|
#
|
|
# We must do etc/ last for install/distribute to work.
|
|
#
|
|
SUBDIR+=etc
|
|
|
|
# These are last, since it is nice to at least get the base system
|
|
# rebuilt before you do them.
|
|
.for _DIR in ${LOCAL_LIB_DIRS} ${LOCAL_DIRS}
|
|
.if exists(${.CURDIR}/${_DIR}/Makefile)
|
|
SUBDIR+= ${_DIR}
|
|
.endif
|
|
.endfor
|
|
.endif
|
|
|
|
.if defined(NOCLEAN)
|
|
NO_CLEAN= ${NOCLEAN}
|
|
.endif
|
|
.if defined(NO_CLEANDIR)
|
|
CLEANDIR= clean cleandepend
|
|
.else
|
|
CLEANDIR= cleandir
|
|
.endif
|
|
|
|
LOCAL_TOOL_DIRS?=
|
|
|
|
BUILDENV_SHELL?=/bin/sh
|
|
|
|
SVN?= /usr/local/bin/svn
|
|
SVNFLAGS?= -r HEAD
|
|
|
|
MAKEOBJDIRPREFIX?= /usr/obj
|
|
.if !defined(OSRELDATE)
|
|
.if exists(/usr/include/osreldate.h)
|
|
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
|
|
/usr/include/osreldate.h
|
|
.else
|
|
OSRELDATE= 0
|
|
.endif
|
|
.endif
|
|
|
|
.if !defined(VERSION)
|
|
REVISION!= make -C ${SRCDIR}/release -V REVISION
|
|
BRANCH!= make -C ${SRCDIR}/release -V BRANCH
|
|
SRCRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
|
|
${SRCDIR}/sys/sys/param.h
|
|
VERSION= FreeBSD ${REVISION}-${BRANCH} ${TARGET_ARCH} ${SRCRELDATE}
|
|
.endif
|
|
|
|
KNOWN_ARCHES?= amd64 arm armeb/arm armv6/arm i386 i386/pc98 ia64 mips mipsel/mips mips64el/mips mips64/mips mipsn32el/mips mipsn32/mips powerpc powerpc64/powerpc sparc64
|
|
.if ${TARGET} == ${TARGET_ARCH}
|
|
_t= ${TARGET}
|
|
.else
|
|
_t= ${TARGET_ARCH}/${TARGET}
|
|
.endif
|
|
.for _t in ${_t}
|
|
.if empty(KNOWN_ARCHES:M${_t})
|
|
.error Unknown target ${TARGET_ARCH}:${TARGET}.
|
|
.endif
|
|
.endfor
|
|
|
|
.if ${TARGET} == ${MACHINE}
|
|
TARGET_CPUTYPE?=${CPUTYPE}
|
|
.else
|
|
TARGET_CPUTYPE?=
|
|
.endif
|
|
|
|
.if !empty(TARGET_CPUTYPE)
|
|
_TARGET_CPUTYPE=${TARGET_CPUTYPE}
|
|
.else
|
|
_TARGET_CPUTYPE=dummy
|
|
.endif
|
|
_CPUTYPE!= MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \
|
|
-f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE
|
|
.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
|
|
.error CPUTYPE global should be set with ?=.
|
|
.endif
|
|
.if make(buildworld)
|
|
BUILD_ARCH!= uname -p
|
|
.if ${MACHINE_ARCH} != ${BUILD_ARCH}
|
|
.error To cross-build, set TARGET_ARCH.
|
|
.endif
|
|
.endif
|
|
.if ${MACHINE} == ${TARGET} && ${MACHINE_ARCH} == ${TARGET_ARCH} && !defined(CROSS_BUILD_TESTING)
|
|
OBJTREE= ${MAKEOBJDIRPREFIX}
|
|
.else
|
|
OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}
|
|
.endif
|
|
WORLDTMP= ${OBJTREE}${.CURDIR}/tmp
|
|
# /usr/games added for fortune which depend on strfile
|
|
BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games:${WORLDTMP}/legacy/bin
|
|
XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
|
|
STRICTTMPPATH= ${BPATH}:${XPATH}
|
|
TMPPATH= ${STRICTTMPPATH}:${PATH}
|
|
|
|
#
|
|
# Avoid running mktemp(1) unless actually needed.
|
|
# It may not be functional, e.g., due to new ABI
|
|
# when in the middle of installing over this system.
|
|
#
|
|
.if make(distributeworld) || make(installworld)
|
|
INSTALLTMP!= /usr/bin/mktemp -d -u -t install
|
|
.endif
|
|
|
|
#
|
|
# Building a world goes through the following stages
|
|
#
|
|
# 1. legacy stage [BMAKE]
|
|
# This stage is responsible for creating compatibility
|
|
# shims that are needed by the bootstrap-tools,
|
|
# build-tools and cross-tools stages.
|
|
# 1. bootstrap-tools stage [BMAKE]
|
|
# This stage is responsible for creating programs that
|
|
# are needed for backward compatibility reasons. They
|
|
# are not built as cross-tools.
|
|
# 2. build-tools stage [TMAKE]
|
|
# This stage is responsible for creating the object
|
|
# tree and building any tools that are needed during
|
|
# the build process.
|
|
# 3. cross-tools stage [XMAKE]
|
|
# This stage is responsible for creating any tools that
|
|
# are needed for cross-builds. A cross-compiler is one
|
|
# of them.
|
|
# 4. world stage [WMAKE]
|
|
# This stage actually builds the world.
|
|
# 5. install stage (optional) [IMAKE]
|
|
# This stage installs a previously built world.
|
|
#
|
|
|
|
BOOTSTRAPPING?= 0
|
|
|
|
# Common environment for world related stages
|
|
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
|
|
MACHINE_ARCH=${TARGET_ARCH} \
|
|
MACHINE=${TARGET} \
|
|
CPUTYPE=${TARGET_CPUTYPE}
|
|
.if ${MK_GROFF} != "no"
|
|
CROSSENV+= GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
|
|
GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
|
|
GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
|
|
.endif
|
|
|
|
# bootstrap-tools stage
|
|
BMAKEENV= INSTALL="sh ${.CURDIR}/tools/install.sh" \
|
|
PATH=${BPATH}:${PATH} \
|
|
WORLDTMP=${WORLDTMP} \
|
|
VERSION="${VERSION}" \
|
|
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" \
|
|
COMPILER_TYPE=${COMPILER_TYPE}
|
|
BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \
|
|
${BMAKEENV} ${MAKE} ${WORLD_FLAGS} -f Makefile.inc1 \
|
|
DESTDIR= \
|
|
BOOTSTRAPPING=${OSRELDATE} \
|
|
SSP_CFLAGS= \
|
|
-DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
|
|
-DNO_PIC -DNO_PROFILE -DNO_SHARED \
|
|
-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
|
|
|
|
# build-tools stage
|
|
TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \
|
|
${BMAKEENV} ${MAKE} ${WORLD_FLAGS} -f Makefile.inc1 \
|
|
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
|
|
DESTDIR= \
|
|
BOOTSTRAPPING=${OSRELDATE} \
|
|
SSP_CFLAGS= \
|
|
-DNO_LINT \
|
|
-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
|
|
|
|
# cross-tools stage
|
|
XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \
|
|
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
|
|
-DWITHOUT_GDB
|
|
|
|
# kernel-tools stage
|
|
KTMAKEENV= INSTALL="sh ${.CURDIR}/tools/install.sh" \
|
|
PATH=${BPATH}:${PATH} \
|
|
WORLDTMP=${WORLDTMP} \
|
|
VERSION="${VERSION}" \
|
|
COMPILER_TYPE=${COMPILER_TYPE}
|
|
KTMAKE= TOOLS_PREFIX=${WORLDTMP} MAKEOBJDIRPREFIX=${WORLDTMP} \
|
|
${KTMAKEENV} ${MAKE} ${WORLD_FLAGS} -f Makefile.inc1 \
|
|
DESTDIR= \
|
|
BOOTSTRAPPING=${OSRELDATE} \
|
|
SSP_CFLAGS= \
|
|
-DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
|
|
-DNO_PIC -DNO_PROFILE -DNO_SHARED \
|
|
-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
|
|
|
|
# world stage
|
|
WMAKEENV= ${CROSSENV} \
|
|
_SHLIBDIRPREFIX=${WORLDTMP} \
|
|
_LDSCRIPTROOT= \
|
|
VERSION="${VERSION}" \
|
|
INSTALL="sh ${.CURDIR}/tools/install.sh" \
|
|
PATH=${TMPPATH}
|
|
|
|
# make hierarchy
|
|
HMAKE= PATH=${TMPPATH} ${MAKE} LOCAL_MTREE=${LOCAL_MTREE:Q}
|
|
.if defined(NO_ROOT)
|
|
HMAKE+= PATH=${TMPPATH} METALOG=${METALOG} -DNO_ROOT
|
|
.endif
|
|
|
|
.if ${MK_CDDL} == "no"
|
|
WMAKEENV+= NO_CTF=1
|
|
.endif
|
|
|
|
.if defined(CROSS_TOOLCHAIN_PREFIX)
|
|
CROSS_COMPILER_PREFIX?=${CROSS_TOOLCHAIN_PREFIX}
|
|
CROSS_BINUTILS_PREFIX?=${CROSS_TOOLCHAIN_PREFIX}
|
|
.endif
|
|
XCOMPILERS= CC CXX CPP
|
|
.for COMPILER in ${XCOMPILERS}
|
|
.if defined(CROSS_COMPILER_PREFIX)
|
|
X${COMPILER}?= ${CROSS_COMPILER_PREFIX}${${COMPILER}}
|
|
.else
|
|
X${COMPILER}?= ${${COMPILER}}
|
|
.endif
|
|
.endfor
|
|
XBINUTILS= AS AR LD NM OBJDUMP RANLIB STRINGS
|
|
.for BINUTIL in ${XBINUTILS}
|
|
.if defined(CROSS_BINUTILS_PREFIX)
|
|
X${BINUTIL}?= ${CROSS_BINUTILS_PREFIX}${${BINUTIL}}
|
|
.else
|
|
X${BINUTIL}?= ${${BINUTIL}}
|
|
.endif
|
|
.endfor
|
|
WMAKEENV+= CC="${XCC} ${XFLAGS}" CXX="${XCXX} ${XFLAGS}" \
|
|
CPP="${XCPP} ${XFLAGS}" \
|
|
AS="${XAS}" AR="${XAR}" LD="${XLD}" NM=${XNM} \
|
|
OBJDUMP=${XOBJDUMP} RANLIB=${XRANLIB} STRINGS=${XSTRINGS}
|
|
|
|
.if ${XCC:T:Mgcc} == "gcc"
|
|
WMAKE_COMPILER_TYPE= gcc
|
|
.elif ${XCC:T:Mclang} == "clang"
|
|
WMAKE_COMPILER_TYPE= clang
|
|
.elif ${MK_CLANG_IS_CC} == "no"
|
|
WMAKE_COMPILER_TYPE= gcc
|
|
.else
|
|
WMAKE_COMPILER_TYPE= clang
|
|
.endif
|
|
IMAKE_COMPILER_TYPE= COMPILER_TYPE=${WMAKE_COMPILER_TYPE}
|
|
|
|
.if ${XCC:M/*}
|
|
XFLAGS= --sysroot=${WORLDTMP}
|
|
.if defined(CROSS_BINUTILS_PREFIX)
|
|
# In the case of xdev-build tools, CROSS_BINUTILS_PREFIX won't be a
|
|
# directory, but the compiler will look in the right place for it's
|
|
# tools so we don't need to tell it where to look.
|
|
.if exists(${CROSS_BINUTILS_PREFIX})
|
|
XFLAGS+= -B${CROSS_BINUTILS_PREFIX}
|
|
.endif
|
|
.else
|
|
XFLAGS+= -B${WORLDTMP}/usr/bin
|
|
.endif
|
|
.if ${TARGET_ARCH} != ${MACHINE_ARCH} && ${WMAKE_COMPILER_TYPE} == "clang"
|
|
.if (${TARGET_ARCH} == "arm" || ${TARGET_ARCH} == "armv6") && \
|
|
${MK_ARM_EABI} != "no"
|
|
TARGET_ABI= gnueabi
|
|
.else
|
|
TARGET_ABI= unknown
|
|
.endif
|
|
TARGET_TRIPLE?= ${TARGET_ARCH:C/amd64/x86_64/}-${TARGET_ABI}-freebsd11.0
|
|
XFLAGS+= -target ${TARGET_TRIPLE}
|
|
.endif
|
|
.endif
|
|
|
|
WMAKEENV+= COMPILER_TYPE=${WMAKE_COMPILER_TYPE}
|
|
WMAKE= ${WMAKEENV} ${MAKE} ${WORLD_FLAGS} -f Makefile.inc1 DESTDIR=${WORLDTMP}
|
|
|
|
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "powerpc64"
|
|
# 32 bit world
|
|
LIB32TMP= ${OBJTREE}${.CURDIR}/lib32
|
|
|
|
.if ${TARGET_ARCH} == "amd64"
|
|
.if empty(TARGET_CPUTYPE)
|
|
LIB32CPUFLAGS= -march=i686 -mmmx -msse -msse2
|
|
.else
|
|
LIB32CPUFLAGS= -march=${TARGET_CPUTYPE}
|
|
.endif
|
|
LIB32WMAKEENV= MACHINE=i386 MACHINE_ARCH=i386 \
|
|
MACHINE_CPU="i686 mmx sse sse2"
|
|
LIB32WMAKEFLAGS= \
|
|
AS="${AS} --32" \
|
|
LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32"
|
|
|
|
.elif ${TARGET_ARCH} == "powerpc64"
|
|
.if empty(TARGET_CPUTYPE)
|
|
LIB32CPUFLAGS= -mcpu=powerpc
|
|
.else
|
|
LIB32CPUFLAGS= -mcpu=${TARGET_CPUTYPE}
|
|
.endif
|
|
LIB32WMAKEENV= MACHINE=powerpc MACHINE_ARCH=powerpc
|
|
LIB32WMAKEFLAGS= \
|
|
LD="${LD} -m elf32ppc_fbsd"
|
|
.endif
|
|
|
|
|
|
LIB32FLAGS= -m32 ${LIB32CPUFLAGS} -DCOMPAT_32BIT \
|
|
-isystem ${LIB32TMP}/usr/include/ \
|
|
-L${LIB32TMP}/usr/lib32 \
|
|
-B${LIB32TMP}/usr/lib32
|
|
.if ${XCC:M/*}
|
|
LIB32FLAGS+= --sysroot=${WORLDTMP}
|
|
.endif
|
|
|
|
# Yes, the flags are redundant.
|
|
LIB32WMAKEENV+= MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
|
|
_SHLIBDIRPREFIX=${LIB32TMP} \
|
|
_LDSCRIPTROOT=${LIB32TMP} \
|
|
VERSION="${VERSION}" \
|
|
INSTALL="sh ${.CURDIR}/tools/install.sh" \
|
|
PATH=${TMPPATH} \
|
|
LIBDIR=/usr/lib32 \
|
|
SHLIBDIR=/usr/lib32 \
|
|
LIBPRIVATEDIR=/usr/lib32/private \
|
|
COMPILER_TYPE=${WMAKE_COMPILER_TYPE}
|
|
LIB32WMAKEFLAGS+= \
|
|
CC="${XCC} ${LIB32FLAGS}" \
|
|
CXX="${XCXX} ${LIB32FLAGS}" \
|
|
DESTDIR=${LIB32TMP} \
|
|
-DCOMPAT_32BIT \
|
|
-DLIBRARIES_ONLY \
|
|
-DNO_CPU_CFLAGS \
|
|
-DNO_CTF \
|
|
-DNO_LINT
|
|
|
|
LIB32WMAKE= ${LIB32WMAKEENV} ${MAKE} ${LIB32WMAKEFLAGS} \
|
|
-DWITHOUT_MAN -DWITHOUT_INFO -DWITHOUT_HTML
|
|
LIB32IMAKE= ${LIB32WMAKE:NINSTALL=*:NDESTDIR=*:N_LDSCRIPTROOT=*} -DNO_INCS \
|
|
${IMAKE_INSTALL}
|
|
.endif
|
|
|
|
IMAKEENV= ${CROSSENV:N_LDSCRIPTROOT=*}
|
|
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 \
|
|
${IMAKE_INSTALL} ${IMAKE_MTREE} ${IMAKE_COMPILER_TYPE}
|
|
.if empty(.MAKEFLAGS:M-n)
|
|
IMAKEENV+= PATH=${STRICTTMPPATH}:${INSTALLTMP} \
|
|
LD_LIBRARY_PATH=${INSTALLTMP} \
|
|
PATH_LOCALE=${INSTALLTMP}/locale
|
|
IMAKE+= __MAKE_SHELL=${INSTALLTMP}/sh
|
|
.else
|
|
IMAKEENV+= PATH=${TMPPATH}:${INSTALLTMP}
|
|
.endif
|
|
.if defined(DB_FROM_SRC)
|
|
INSTALLFLAGS+= -N ${.CURDIR}/etc
|
|
MTREEFLAGS+= -N ${.CURDIR}/etc
|
|
.endif
|
|
_INSTALL_DDIR= ${DESTDIR}/${DISTDIR}
|
|
INSTALL_DDIR= ${_INSTALL_DDIR:S://:/:g:C:/$::}
|
|
.if defined(NO_ROOT)
|
|
METALOG?= ${DESTDIR}/${DISTDIR}/METALOG
|
|
IMAKE+= -DNO_ROOT METALOG=${METALOG}
|
|
INSTALLFLAGS+= -U -M ${METALOG} -D ${INSTALL_DDIR}
|
|
MTREEFLAGS+= -W
|
|
.endif
|
|
.if defined(DB_FROM_SRC) || defined(NO_ROOT)
|
|
IMAKE_INSTALL= INSTALL="install ${INSTALLFLAGS}"
|
|
IMAKE_MTREE= MTREE_CMD="nmtree ${MTREEFLAGS}"
|
|
.endif
|
|
|
|
# kernel stage
|
|
KMAKEENV= ${WMAKEENV}
|
|
KMAKE= ${KMAKEENV} ${MAKE} ${.MAKEFLAGS} ${KERNEL_FLAGS} KERNEL=${INSTKERNNAME}
|
|
|
|
#
|
|
# buildworld
|
|
#
|
|
# Attempt to rebuild the entire system, with reasonable chance of
|
|
# success, regardless of how old your existing system is.
|
|
#
|
|
_worldtmp:
|
|
.if ${.CURDIR:C/[^,]//g} != ""
|
|
# The m4 build of sendmail files doesn't like it if ',' is used
|
|
# anywhere in the path of it's files.
|
|
@echo
|
|
@echo "*** Error: path to source tree contains a comma ','"
|
|
@echo
|
|
false
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Rebuilding the temporary build tree"
|
|
@echo "--------------------------------------------------------------"
|
|
.if !defined(NO_CLEAN)
|
|
rm -rf ${WORLDTMP}
|
|
.if defined(LIB32TMP)
|
|
rm -rf ${LIB32TMP}
|
|
.endif
|
|
.else
|
|
rm -rf ${WORLDTMP}/legacy/usr/include
|
|
# XXX - These three can depend on any header file.
|
|
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
|
|
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/kdump_subr.c
|
|
rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
|
|
.endif
|
|
.for _dir in \
|
|
lib usr legacy/bin legacy/usr
|
|
mkdir -p ${WORLDTMP}/${_dir}
|
|
.endfor
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${WORLDTMP}/legacy/usr >/dev/null
|
|
.if ${MK_GROFF} != "no"
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.groff.dist \
|
|
-p ${WORLDTMP}/legacy/usr >/dev/null
|
|
.endif
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${WORLDTMP}/usr >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
|
|
-p ${WORLDTMP}/usr/include >/dev/null
|
|
ln -sf ${.CURDIR}/sys ${WORLDTMP}
|
|
.if ${MK_DEBUG_FILES} != "no"
|
|
# We could instead disable debug files for these build stages
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.debug.dist \
|
|
-p ${WORLDTMP}/legacy/usr/lib >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.debug.dist \
|
|
-p ${WORLDTMP}/usr/lib >/dev/null
|
|
.endif
|
|
.if ${MK_TESTS} != "no"
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.tests.dist \
|
|
-p ${WORLDTMP}${TESTSBASE} >/dev/null
|
|
.endif
|
|
.for _mtree in ${LOCAL_MTREE}
|
|
mtree -deU -f ${.CURDIR}/${_mtree} -p ${WORLDTMP} > /dev/null
|
|
.endfor
|
|
_legacy:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 1.1: legacy release compatibility shims"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${BMAKE} legacy
|
|
_bootstrap-tools:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 1.2: bootstrap tools"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools
|
|
_cleanobj:
|
|
.if !defined(NO_CLEAN)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.1: cleaning up the object tree"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
|
|
.if defined(LIB32TMP)
|
|
${_+_}cd ${.CURDIR}; ${LIB32WMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/}
|
|
.endif
|
|
.endif
|
|
_obj:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.2: rebuilding the object tree"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${WMAKE} par-obj
|
|
_build-tools:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.3: build tools"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${TMAKE} build-tools
|
|
_cross-tools:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 3: cross tools"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools
|
|
${_+_}cd ${.CURDIR}; ${XMAKE} kernel-tools
|
|
_includes:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 4.1: building includes"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
|
|
_libraries:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 4.2: building libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; \
|
|
${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
|
|
-DWITHOUT_MAN -DNO_PROFILE libraries
|
|
_depend:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 4.3: make dependencies"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${WMAKE} par-depend
|
|
everything:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 4.4: building everything"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${WMAKE} par-all
|
|
.if defined(LIB32TMP)
|
|
build32:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 5.1: building 32 bit shim libraries"
|
|
@echo "--------------------------------------------------------------"
|
|
mkdir -p ${LIB32TMP}/usr/include
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${LIB32TMP}/usr >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
|
|
-p ${LIB32TMP}/usr/include >/dev/null
|
|
.if ${MK_DEBUG_FILES} != "no"
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.debug.dist \
|
|
-p ${LIB32TMP}/usr/lib >/dev/null
|
|
.endif
|
|
mkdir -p ${WORLDTMP}
|
|
ln -sf ${.CURDIR}/sys ${WORLDTMP}
|
|
.for _t in obj includes
|
|
cd ${.CURDIR}/include; ${LIB32WMAKE} DIRPRFX=include/ ${_t}
|
|
cd ${.CURDIR}/lib; ${LIB32WMAKE} DIRPRFX=lib/ ${_t}
|
|
.if ${MK_CDDL} != "no"
|
|
cd ${.CURDIR}/cddl/lib; ${LIB32WMAKE} DIRPRFX=cddl/lib/ ${_t}
|
|
.endif
|
|
cd ${.CURDIR}/gnu/lib; ${LIB32WMAKE} DIRPRFX=gnu/lib/ ${_t}
|
|
.if ${MK_CRYPT} != "no"
|
|
cd ${.CURDIR}/secure/lib; ${LIB32WMAKE} DIRPRFX=secure/lib/ ${_t}
|
|
.endif
|
|
.if ${MK_KERBEROS} != "no"
|
|
cd ${.CURDIR}/kerberos5/lib; ${LIB32WMAKE} DIRPRFX=kerberos5/lib ${_t}
|
|
.endif
|
|
.endfor
|
|
.for _dir in usr.bin/lex/lib
|
|
cd ${.CURDIR}/${_dir}; ${LIB32WMAKE} DIRPRFX=${_dir}/ obj
|
|
.endfor
|
|
.for _dir in lib/ncurses/ncurses lib/ncurses/ncursesw lib/libmagic
|
|
cd ${.CURDIR}/${_dir}; \
|
|
WORLDTMP=${WORLDTMP} \
|
|
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" \
|
|
MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} SSP_CFLAGS= DESTDIR= \
|
|
DIRPRFX=${_dir}/ -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF \
|
|
-DEARLY_BUILD build-tools
|
|
.endfor
|
|
cd ${.CURDIR}; \
|
|
${LIB32WMAKE} -f Makefile.inc1 libraries
|
|
.for _t in obj depend all
|
|
cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32WMAKE} \
|
|
DIRPRFX=libexec/rtld-elf/ ${_t}
|
|
cd ${.CURDIR}/usr.bin/ldd; PROG=ldd32 ${LIB32WMAKE} \
|
|
DIRPRFX=usr.bin/ldd ${_t}
|
|
.endfor
|
|
|
|
distribute32 install32:
|
|
cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.if ${MK_CDDL} != "no"
|
|
cd ${.CURDIR}/cddl/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.endif
|
|
cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.if ${MK_CRYPT} != "no"
|
|
cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.endif
|
|
.if ${MK_KERBEROS} != "no"
|
|
cd ${.CURDIR}/kerberos5/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.endif
|
|
cd ${.CURDIR}/libexec/rtld-elf; \
|
|
PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
cd ${.CURDIR}/usr.bin/ldd; PROG=ldd32 ${LIB32IMAKE} ${.TARGET:S/32$//}
|
|
.endif
|
|
|
|
WMAKE_TGTS=
|
|
.if !defined(SUBDIR_OVERRIDE)
|
|
WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools
|
|
.endif
|
|
WMAKE_TGTS+= _cleanobj _obj _build-tools
|
|
.if !defined(SUBDIR_OVERRIDE)
|
|
WMAKE_TGTS+= _cross-tools
|
|
.endif
|
|
WMAKE_TGTS+= _includes _libraries _depend everything
|
|
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
|
|
WMAKE_TGTS+= build32
|
|
.endif
|
|
|
|
buildworld: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
|
|
.ORDER: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
|
|
|
|
buildworld_prologue:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> World build started on `LC_ALL=C date`"
|
|
@echo "--------------------------------------------------------------"
|
|
|
|
buildworld_epilogue:
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> World build completed on `LC_ALL=C date`"
|
|
@echo "--------------------------------------------------------------"
|
|
|
|
#
|
|
# We need to have this as a target because the indirection between Makefile
|
|
# and Makefile.inc1 causes the correct PATH to be used, rather than a
|
|
# modification of the current environment's PATH. In addition, we need
|
|
# to quote multiword values.
|
|
#
|
|
buildenvvars:
|
|
@echo ${WMAKEENV:Q}
|
|
|
|
buildenv:
|
|
@echo Entering world for ${TARGET_ARCH}:${TARGET}
|
|
@cd ${.CURDIR} && env ${WMAKEENV} ${BUILDENV_SHELL} || true
|
|
|
|
TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32}
|
|
toolchain: ${TOOLCHAIN_TGTS}
|
|
kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries}
|
|
|
|
#
|
|
# installcheck
|
|
#
|
|
# Checks to be sure system is ready for installworld/installkernel.
|
|
#
|
|
installcheck: _installcheck_world _installcheck_kernel
|
|
_installcheck_world:
|
|
_installcheck_kernel:
|
|
|
|
#
|
|
# Require DESTDIR to be set if installing for a different architecture or
|
|
# using the user/group database in the source tree.
|
|
#
|
|
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE} || \
|
|
defined(DB_FROM_SRC)
|
|
.if !make(distributeworld)
|
|
_installcheck_world: __installcheck_DESTDIR
|
|
_installcheck_kernel: __installcheck_DESTDIR
|
|
__installcheck_DESTDIR:
|
|
.if !defined(DESTDIR) || empty(DESTDIR)
|
|
@echo "ERROR: Please set DESTDIR!"; \
|
|
false
|
|
.endif
|
|
.endif
|
|
.endif
|
|
|
|
.if !defined(DB_FROM_SRC)
|
|
#
|
|
# Check for missing UIDs/GIDs.
|
|
#
|
|
CHECK_UIDS= auditdistd
|
|
CHECK_GIDS= audit
|
|
.if ${MK_SENDMAIL} != "no"
|
|
CHECK_UIDS+= smmsp
|
|
CHECK_GIDS+= smmsp
|
|
.endif
|
|
.if ${MK_PF} != "no"
|
|
CHECK_UIDS+= proxy
|
|
CHECK_GIDS+= proxy authpf
|
|
.endif
|
|
.if ${MK_UNBOUND} != "no"
|
|
CHECK_UIDS+= unbound
|
|
CHECK_GIDS+= unbound
|
|
.endif
|
|
_installcheck_world: __installcheck_UGID
|
|
__installcheck_UGID:
|
|
.for uid in ${CHECK_UIDS}
|
|
@if ! `id -u ${uid} >/dev/null 2>&1`; then \
|
|
echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \
|
|
false; \
|
|
fi
|
|
.endfor
|
|
.for gid in ${CHECK_GIDS}
|
|
@if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \
|
|
echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \
|
|
false; \
|
|
fi
|
|
.endfor
|
|
.endif
|
|
|
|
#
|
|
# Required install tools to be saved in a scratch dir for safety.
|
|
#
|
|
.if ${MK_INFO} != "no"
|
|
_install-info= install-info
|
|
.endif
|
|
.if ${MK_ZONEINFO} != "no"
|
|
_zoneinfo= zic tzsetup
|
|
.endif
|
|
|
|
.if exists(/usr/sbin/nmtree)
|
|
_nmtree_itools= nmtree
|
|
.endif
|
|
|
|
ITOOLS= [ awk cap_mkdb cat chflags chmod chown \
|
|
date echo egrep find grep id install ${_install-info} \
|
|
ln lockf make mkdir mtree ${_nmtree_itools} mv pwd_mkdb \
|
|
rm sed sh sysctl test true uname wc ${_zoneinfo}
|
|
|
|
#
|
|
# distributeworld
|
|
#
|
|
# Distributes everything compiled by a `buildworld'.
|
|
#
|
|
# installworld
|
|
#
|
|
# Installs everything compiled by a 'buildworld'.
|
|
#
|
|
|
|
# Non-base distributions produced by the base system
|
|
EXTRA_DISTRIBUTIONS= doc
|
|
.if ${MK_GAMES} != "no"
|
|
EXTRA_DISTRIBUTIONS+= games
|
|
.endif
|
|
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
|
|
EXTRA_DISTRIBUTIONS+= lib32
|
|
.endif
|
|
|
|
MTREE_MAGIC?= mtree 2.0
|
|
|
|
distributeworld installworld: _installcheck_world
|
|
mkdir -p ${INSTALLTMP}
|
|
progs=$$(for prog in ${ITOOLS}; do \
|
|
if progpath=`which $$prog`; then \
|
|
echo $$progpath; \
|
|
else \
|
|
echo "Required tool $$prog not found in PATH." >&2; \
|
|
exit 1; \
|
|
fi; \
|
|
done); \
|
|
libs=$$(ldd -f "%o %p\n" -f "%o %p\n" $$progs 2>/dev/null | sort -u | \
|
|
while read line; do \
|
|
set -- $$line; \
|
|
if [ "$$2 $$3" != "not found" ]; then \
|
|
echo $$2; \
|
|
else \
|
|
echo "Required library $$1 not found." >&2; \
|
|
exit 1; \
|
|
fi; \
|
|
done); \
|
|
cp $$libs $$progs ${INSTALLTMP}
|
|
cp -R $${PATH_LOCALE:-"/usr/share/locale"} ${INSTALLTMP}/locale
|
|
.if defined(NO_ROOT)
|
|
echo "#${MTREE_MAGIC}" > ${METALOG}
|
|
.endif
|
|
.if make(distributeworld)
|
|
.for dist in ${EXTRA_DISTRIBUTIONS}
|
|
-mkdir ${DESTDIR}/${DISTDIR}/${dist}
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
|
|
-p ${DESTDIR}/${DISTDIR}/${dist} >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${DESTDIR}/${DISTDIR}/${dist}/usr >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
|
|
-p ${DESTDIR}/${DISTDIR}/${dist}/usr/include >/dev/null
|
|
.if ${MK_DEBUG_FILES} != "no"
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.debug.dist \
|
|
-p ${DESTDIR}/${DISTDIR}/${dist}/usr/lib >/dev/null
|
|
.endif
|
|
.if defined(NO_ROOT)
|
|
${IMAKEENV} nmtree -C -f ${.CURDIR}/etc/mtree/BSD.root.dist | \
|
|
sed -e 's#^\./#./${dist}/#' >> ${METALOG}
|
|
${IMAKEENV} nmtree -C -f ${.CURDIR}/etc/mtree/BSD.usr.dist | \
|
|
sed -e 's#^\./#./${dist}/usr/#' >> ${METALOG}
|
|
${IMAKEENV} nmtree -C -f ${.CURDIR}/etc/mtree/BSD.include.dist | \
|
|
sed -e 's#^\./#./${dist}/usr/include/#' >> ${METALOG}
|
|
.endif
|
|
.endfor
|
|
-mkdir ${DESTDIR}/${DISTDIR}/base
|
|
cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} \
|
|
METALOG=${METALOG} ${IMAKE_INSTALL} ${IMAKE_MTREE} \
|
|
DISTBASE=/base DESTDIR=${DESTDIR}/${DISTDIR}/base \
|
|
LOCAL_MTREE=${LOCAL_MTREE:Q} distrib-dirs
|
|
.endif
|
|
${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}; \
|
|
${IMAKEENV} rm -rf ${INSTALLTMP}
|
|
.if make(distributeworld)
|
|
.for dist in ${EXTRA_DISTRIBUTIONS}
|
|
find ${DESTDIR}/${DISTDIR}/${dist} -mindepth 1 -empty -delete
|
|
.endfor
|
|
.if defined(NO_ROOT)
|
|
.for dist in base ${EXTRA_DISTRIBUTIONS}
|
|
@# For each file that exists in this dist, print the corresponding
|
|
@# line from the METALOG. This relies on the fact that
|
|
@# a line containing only the filename will sort immediatly before
|
|
@# the relevant mtree line.
|
|
cd ${DESTDIR}/${DISTDIR}; \
|
|
find ./${dist} | sort -u ${METALOG} - | \
|
|
awk 'BEGIN { print "#${MTREE_MAGIC}" } !/ type=/ { file = $$1 } / type=/ { if ($$1 == file) { sub(/^\.\/${dist}\//, "./"); print } }' > \
|
|
${DESTDIR}/${DISTDIR}/${dist}.meta
|
|
.endfor
|
|
.if ${MK_DEBUG_FILES} != "no"
|
|
. for dist in base ${EXTRA_DISTRIBUTIONS}
|
|
@# For each file that exists in this dist, print the corresponding
|
|
@# line from the METALOG. This relies on the fact that
|
|
@# a line containing only the filename will sort immediatly before
|
|
@# the relevant mtree line.
|
|
cd ${DESTDIR}/${DISTDIR}; \
|
|
find ./${dist}/usr/lib/debug | sort -u ${METALOG} - | \
|
|
awk 'BEGIN { print "#${MTREE_MAGIC}" } !/ type=/ { file = $$1 } / type=/ { if ($$1 == file) { sub(/^\.\/${dist}\//, "./"); print } }' > \
|
|
${DESTDIR}/${DISTDIR}/${dist}.debug.meta
|
|
. endfor
|
|
.endif
|
|
.endif
|
|
.endif
|
|
|
|
packageworld:
|
|
.for dist in base ${EXTRA_DISTRIBUTIONS}
|
|
.if defined(NO_ROOT)
|
|
${_+_}cd ${DESTDIR}/${DISTDIR}/${dist}; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/${dist}.txz \
|
|
--exclude usr/lib/debug \
|
|
@${DESTDIR}/${DISTDIR}/${dist}.meta
|
|
.else
|
|
${_+_}cd ${DESTDIR}/${DISTDIR}/${dist}; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/${dist}.txz \
|
|
--exclude usr/lib/debug .
|
|
.endif
|
|
.endfor
|
|
|
|
.if ${MK_DEBUG_FILES} != "no"
|
|
. for dist in base ${EXTRA_DISTRIBUTIONS}
|
|
. if defined(NO_ROOT)
|
|
${_+_}cd ${DESTDIR}/${DISTDIR}/${dist}; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/${dist}.debug.txz \
|
|
@${DESTDIR}/${DISTDIR}/${dist}.debug.meta
|
|
. else
|
|
${_+_}cd ${DESTDIR}/${DISTDIR}/${dist}; \
|
|
tar cvJfL ${DESTDIR}/${DISTDIR}/${dist}.debug.txz \
|
|
usr/lib/debug
|
|
. endif
|
|
. endfor
|
|
.endif
|
|
|
|
#
|
|
# reinstall
|
|
#
|
|
# If you have a build server, you can NFS mount the source and obj directories
|
|
# and do a 'make reinstall' on the *client* to install new binaries from the
|
|
# most recent server build.
|
|
#
|
|
reinstall:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Making hierarchy"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 \
|
|
LOCAL_MTREE=${LOCAL_MTREE:Q} hierarchy
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Installing everything"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
|
|
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
|
|
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32
|
|
.endif
|
|
|
|
redistribute:
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Distributing everything"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
|
|
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
|
|
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 \
|
|
DISTRIBUTION=lib32
|
|
.endif
|
|
|
|
distrib-dirs distribution:
|
|
cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} \
|
|
${IMAKE_INSTALL} ${IMAKE_MTREE} METALOG=${METALOG} ${.TARGET}
|
|
|
|
#
|
|
# buildkernel and installkernel
|
|
#
|
|
# Which kernels to build and/or install is specified by setting
|
|
# KERNCONF. If not defined a GENERIC kernel is built/installed.
|
|
# Only the existing (depending TARGET) config files are used
|
|
# for building kernels and only the first of these is designated
|
|
# as the one being installed.
|
|
#
|
|
# Note that we have to use TARGET instead of TARGET_ARCH when
|
|
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
|
|
# be set to cross-build, we have to make sure TARGET is set
|
|
# properly.
|
|
|
|
.if defined(KERNFAST)
|
|
NO_KERNELCLEAN= t
|
|
NO_KERNELCONFIG= t
|
|
NO_KERNELDEPEND= t
|
|
NO_KERNELOBJ= t
|
|
# Shortcut for KERNCONF=Blah -DKERNFAST is now KERNFAST=Blah
|
|
.if !defined(KERNCONF) && ${KERNFAST} != "1"
|
|
KERNCONF=${KERNFAST}
|
|
.endif
|
|
.endif
|
|
.if ${TARGET_ARCH} == "powerpc64"
|
|
KERNCONF?= GENERIC64
|
|
.else
|
|
KERNCONF?= GENERIC
|
|
.endif
|
|
INSTKERNNAME?= kernel
|
|
|
|
KERNSRCDIR?= ${.CURDIR}/sys
|
|
KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf
|
|
KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR}
|
|
KERNCONFDIR?= ${KRNLCONFDIR}
|
|
|
|
BUILDKERNELS=
|
|
INSTALLKERNEL=
|
|
.for _kernel in ${KERNCONF}
|
|
.if exists(${KERNCONFDIR}/${_kernel})
|
|
BUILDKERNELS+= ${_kernel}
|
|
.if empty(INSTALLKERNEL)
|
|
INSTALLKERNEL= ${_kernel}
|
|
.endif
|
|
.endif
|
|
.endfor
|
|
|
|
#
|
|
# buildkernel
|
|
#
|
|
# Builds all kernels defined by BUILDKERNELS.
|
|
#
|
|
buildkernel:
|
|
.if empty(BUILDKERNELS)
|
|
@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \
|
|
false
|
|
.endif
|
|
@echo
|
|
.for _kernel in ${BUILDKERNELS}
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
|
|
@echo "--------------------------------------------------------------"
|
|
@echo "===> ${_kernel}"
|
|
mkdir -p ${KRNLOBJDIR}
|
|
.if !defined(NO_KERNELCONFIG)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 1: configuring the kernel"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLCONFDIR}; \
|
|
PATH=${TMPPATH} \
|
|
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
|
|
${KERNCONFDIR}/${_kernel}
|
|
.endif
|
|
.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.1: cleaning up the object tree"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR}
|
|
.endif
|
|
.if !defined(NO_KERNELOBJ)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.2: rebuilding the object tree"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 2.3: build tools"
|
|
@echo "--------------------------------------------------------------"
|
|
${_+_}cd ${.CURDIR}; ${KTMAKE} kernel-tools
|
|
.if !defined(NO_KERNELDEPEND)
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 3.1: making dependencies"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ
|
|
.endif
|
|
@echo
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> stage 3.2: building everything"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
|
|
@echo "--------------------------------------------------------------"
|
|
.endfor
|
|
|
|
#
|
|
# installkernel, etc.
|
|
#
|
|
# Install the kernel defined by INSTALLKERNEL
|
|
#
|
|
installkernel installkernel.debug \
|
|
reinstallkernel reinstallkernel.debug: _installcheck_kernel
|
|
.if empty(INSTALLKERNEL)
|
|
@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
|
|
false
|
|
.endif
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Installing kernel ${INSTALLKERNEL}"
|
|
@echo "--------------------------------------------------------------"
|
|
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
|
|
${CROSSENV} PATH=${TMPPATH} \
|
|
${MAKE} ${IMAKE_INSTALL} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
|
|
|
|
distributekernel distributekernel.debug:
|
|
.if empty(INSTALLKERNEL)
|
|
@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
|
|
false
|
|
.endif
|
|
mkdir -p ${DESTDIR}/${DISTDIR}
|
|
.if defined(NO_ROOT)
|
|
echo "#${MTREE_MAGIC}" > ${DESTDIR}/${DISTDIR}/kernel.premeta
|
|
.endif
|
|
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
|
|
${IMAKEENV} ${IMAKE_INSTALL:S/METALOG/kernel.premeta/} \
|
|
${IMAKE_MTREE} PATH=${TMPPATH} ${MAKE} KERNEL=${INSTKERNNAME} \
|
|
DESTDIR=${INSTALL_DDIR}/kernel \
|
|
${.TARGET:S/distributekernel/install/}
|
|
.if defined(NO_ROOT)
|
|
sed -e 's|^./kernel|.|' ${DESTDIR}/${DISTDIR}/kernel.premeta > \
|
|
${DESTDIR}/${DISTDIR}/kernel.meta
|
|
.endif
|
|
.for _kernel in ${BUILDKERNELS:S/${INSTALLKERNEL}//}
|
|
.if defined(NO_ROOT)
|
|
echo "#${MTREE_MAGIC}" > ${DESTDIR}/${DISTDIR}/kernel.${_kernel}.premeta
|
|
.endif
|
|
cd ${KRNLOBJDIR}/${_kernel}; \
|
|
${IMAKEENV} ${IMAKE_INSTALL:S/METALOG/kernel.${_kernel}.premeta/} \
|
|
${IMAKE_MTREE} PATH=${TMPPATH} ${MAKE} \
|
|
KERNEL=${INSTKERNNAME}.${_kernel} \
|
|
DESTDIR=${INSTALL_DDIR}/kernel.${_kernel} \
|
|
${.TARGET:S/distributekernel/install/}
|
|
.if defined(NO_ROOT)
|
|
sed -e 's|^./kernel|.|' \
|
|
${DESTDIR}/${DISTDIR}/kernel.${_kernel}.premeta > \
|
|
${DESTDIR}/${DISTDIR}/kernel.${_kernel}.meta
|
|
.endif
|
|
.endfor
|
|
|
|
packagekernel:
|
|
.if defined(NO_ROOT)
|
|
cd ${DESTDIR}/${DISTDIR}/kernel; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.txz \
|
|
@${DESTDIR}/${DISTDIR}/kernel.meta
|
|
.for _kernel in ${BUILDKERNELS:S/${INSTALLKERNEL}//}
|
|
cd ${DESTDIR}/${DISTDIR}/kernel.${_kernel}; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.${_kernel}.txz \
|
|
@${DESTDIR}/${DISTDIR}/kernel.${_kernel}.meta
|
|
.endfor
|
|
.else
|
|
cd ${DESTDIR}/${DISTDIR}/kernel; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.txz .
|
|
.for _kernel in ${BUILDKERNELS:S/${INSTALLKERNEL}//}
|
|
cd ${DESTDIR}/${DISTDIR}/kernel.${_kernel}; \
|
|
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.${_kernel}.txz .
|
|
.endfor
|
|
.endif
|
|
|
|
#
|
|
# doxygen
|
|
#
|
|
# Build the API documentation with doxygen
|
|
#
|
|
doxygen:
|
|
@if [ ! -x `/usr/bin/which doxygen` ]; then \
|
|
echo "You need doxygen (devel/doxygen) to generate the API documentation of the kernel." | /usr/bin/fmt; \
|
|
exit 1; \
|
|
fi
|
|
cd ${.CURDIR}/tools/kerneldoc/subsys && ${MAKE} obj all
|
|
|
|
#
|
|
# update
|
|
#
|
|
# Update the source tree(s), by running svn/svnup to update to the
|
|
# latest copy.
|
|
#
|
|
update:
|
|
.if (defined(CVS_UPDATE) || defined(SUP_UPDATE)) && !defined(SVN_UPDATE)
|
|
@echo "--------------------------------------------------------------"
|
|
@echo "CVS_UPDATE and SUP_UPDATE are no longer supported."
|
|
@echo "Please see: https://wiki.freebsd.org/CvsIsDeprecated"
|
|
@echo "--------------------------------------------------------------"
|
|
@exit 1
|
|
.endif
|
|
.if defined(SVN_UPDATE)
|
|
@echo "--------------------------------------------------------------"
|
|
@echo ">>> Updating ${.CURDIR} using Subversion"
|
|
@echo "--------------------------------------------------------------"
|
|
@(cd ${.CURDIR} && ${SVN} update ${SVNFLAGS})
|
|
.endif
|
|
|
|
#
|
|
# ------------------------------------------------------------------------
|
|
#
|
|
# From here onwards are utility targets used by the 'make world' and
|
|
# related targets. If your 'world' breaks, you may like to try to fix
|
|
# the problem and manually run the following targets to attempt to
|
|
# complete the build. Beware, this is *not* guaranteed to work, you
|
|
# need to have a pretty good grip on the current state of the system
|
|
# to attempt to manually finish it. If in doubt, 'make world' again.
|
|
#
|
|
|
|
#
|
|
# legacy: Build compatibility shims for the next three targets
|
|
#
|
|
legacy:
|
|
.if ${BOOTSTRAPPING} < 700055 && ${BOOTSTRAPPING} != 0
|
|
@echo "ERROR: Source upgrades from versions prior to 7.0 not supported."; \
|
|
false
|
|
.endif
|
|
.for _tool in tools/build
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes && \
|
|
${MAKE} DIRPRFX=${_tool}/ depend && \
|
|
${MAKE} DIRPRFX=${_tool}/ all && \
|
|
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
|
|
.endfor
|
|
|
|
#
|
|
# bootstrap-tools: Build tools needed for compatibility
|
|
#
|
|
.if ${MK_GAMES} != "no"
|
|
_strfile= games/fortune/strfile
|
|
.endif
|
|
|
|
.if ${MK_CXX} != "no"
|
|
_gperf= gnu/usr.bin/gperf
|
|
.endif
|
|
|
|
.if ${MK_GROFF} != "no"
|
|
_groff= gnu/usr.bin/groff
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 800022
|
|
_ar= usr.bin/ar
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 800013
|
|
_mklocale= usr.bin/mklocale
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 900002
|
|
_sed= usr.bin/sed
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 900006
|
|
_lex= usr.bin/lex
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 1000002
|
|
_m4= usr.bin/m4
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 1000013
|
|
_yacc= lib/liby \
|
|
usr.bin/yacc
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 1000014
|
|
_crunch= usr.sbin/crunch
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 1000026
|
|
_nmtree= lib/libnetbsd \
|
|
usr.sbin/nmtree
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} < 1000027
|
|
_cat= bin/cat
|
|
.endif
|
|
|
|
.if ${BOOTSTRAPPING} >= 900040 && ${BOOTSTRAPPING} < 900041
|
|
_awk= usr.bin/awk
|
|
.endif
|
|
|
|
.if ${MK_BSNMP} != "no" && !exists(/usr/sbin/gensnmptree)
|
|
_gensnmptree= usr.sbin/bsnmpd/gensnmptree
|
|
.endif
|
|
|
|
.if ${MK_CLANG} != "no"
|
|
_clang_tblgen= \
|
|
lib/clang/libllvmsupport \
|
|
lib/clang/libllvmtablegen \
|
|
usr.bin/clang/tblgen \
|
|
usr.bin/clang/clang-tblgen
|
|
.endif
|
|
|
|
# dtrace tools are required for older bootstrap env and cross-build
|
|
.if ${MK_CDDL} != "no" && \
|
|
((${BOOTSTRAPPING} < 1000034 && \
|
|
!(${BOOTSTRAPPING} >= 901505 && ${BOOTSTRAPPING} < 999999)) \
|
|
|| (${MACHINE} != ${TARGET} || ${MACHINE_ARCH} != ${TARGET_ARCH}))
|
|
_dtrace_tools= cddl/usr.bin/sgsmsg cddl/lib/libctf lib/libelf \
|
|
lib/libdwarf cddl/usr.bin/ctfconvert cddl/usr.bin/ctfmerge
|
|
.endif
|
|
|
|
# Default to building the BSDL DTC, but build the GPL one if users explicitly
|
|
# request it.
|
|
_dtc= usr.bin/dtc
|
|
.if ${MK_GPL_DTC} != "no"
|
|
_dtc= gnu/usr.bin/dtc
|
|
.endif
|
|
|
|
.if ${MK_KERBEROS} != "no"
|
|
_kerberos5_bootstrap_tools= \
|
|
kerberos5/tools/make-roken \
|
|
kerberos5/lib/libroken \
|
|
kerberos5/lib/libvers \
|
|
kerberos5/tools/asn1_compile \
|
|
kerberos5/tools/slc \
|
|
usr.bin/compile_et
|
|
.endif
|
|
|
|
# Please document (add comment) why something is in 'bootstrap-tools'.
|
|
# Try to bound the building of the bootstrap-tool to just the
|
|
# FreeBSD versions that need the tool built at this stage of the build.
|
|
bootstrap-tools: .MAKE
|
|
.for _tool in \
|
|
${_clang_tblgen} \
|
|
${_kerberos5_bootstrap_tools} \
|
|
${_dtrace_tools} \
|
|
${_strfile} \
|
|
${_gperf} \
|
|
${_groff} \
|
|
${_ar} \
|
|
${_dtc} \
|
|
${_awk} \
|
|
${_cat} \
|
|
usr.bin/lorder \
|
|
usr.bin/makewhatis \
|
|
${_mklocale} \
|
|
usr.bin/rpcgen \
|
|
${_sed} \
|
|
${_yacc} \
|
|
${_m4} \
|
|
${_lex} \
|
|
lib/libmd \
|
|
usr.bin/xinstall \
|
|
${_gensnmptree} \
|
|
usr.sbin/config \
|
|
${_crunch} \
|
|
${_nmtree}
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ depend && \
|
|
${MAKE} DIRPRFX=${_tool}/ all && \
|
|
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
|
|
.endfor
|
|
|
|
#
|
|
# build-tools: Build special purpose build tools
|
|
#
|
|
.if !defined(NO_SHARE)
|
|
_share= share/syscons/scrnmaps
|
|
.endif
|
|
|
|
.if ${MK_GCC} != "no"
|
|
_gcc_tools= gnu/usr.bin/cc/cc_tools
|
|
.endif
|
|
|
|
.if ${MK_RESCUE} != "no"
|
|
_rescue= rescue/rescue
|
|
.endif
|
|
|
|
build-tools: .MAKE
|
|
.for _tool in \
|
|
bin/csh \
|
|
bin/sh \
|
|
${_rescue} \
|
|
${LOCAL_TOOL_DIRS} \
|
|
lib/ncurses/ncurses \
|
|
lib/ncurses/ncursesw \
|
|
${_share} \
|
|
usr.bin/awk \
|
|
lib/libmagic \
|
|
usr.bin/mkesdb_static \
|
|
usr.bin/mkcsmapper_static \
|
|
usr.bin/vi/catalog
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ build-tools
|
|
.endfor
|
|
.for _tool in \
|
|
${_gcc_tools}
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ depend && \
|
|
${MAKE} DIRPRFX=${_tool}/ all
|
|
.endfor
|
|
|
|
#
|
|
# kernel-tools: Build kernel-building tools
|
|
#
|
|
kernel-tools: .MAKE
|
|
mkdir -p ${MAKEOBJDIRPREFIX}/usr
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${MAKEOBJDIRPREFIX}/usr >/dev/null
|
|
.for _tool in \
|
|
sys/dev/aic7xxx/aicasm
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ depend && \
|
|
${MAKE} DIRPRFX=${_tool}/ all && \
|
|
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
|
|
.endfor
|
|
|
|
#
|
|
# cross-tools: Build cross-building tools
|
|
#
|
|
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 800035
|
|
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386"
|
|
_btxld= usr.sbin/btxld
|
|
.endif
|
|
.endif
|
|
.if ${TARGET_ARCH} != ${MACHINE_ARCH}
|
|
.if ${MK_RESCUE} != "no" || defined(RELEASEDIR)
|
|
_crunchide= usr.sbin/crunch/crunchide
|
|
.endif
|
|
.if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR)
|
|
_kgzip= usr.sbin/kgzip
|
|
.endif
|
|
.endif
|
|
|
|
.if ${XAS:M/*} == "" && ${MK_BINUTILS} != "no"
|
|
_binutils= gnu/usr.bin/binutils
|
|
.endif
|
|
|
|
# If an full path to an external cross compiler is given, don't build
|
|
# a cross compiler.
|
|
.if ${XCC:M/*} == "" && ${MK_CROSS_COMPILER} != "no"
|
|
.if ${MK_CLANG_IS_CC} != "no" || ${CC:T:Mclang} == "clang"
|
|
_clang= usr.bin/clang
|
|
_clang_libs= lib/clang
|
|
.else
|
|
_cc= gnu/usr.bin/cc
|
|
.endif
|
|
|
|
# The boot2 for pc98 requires gcc.
|
|
.if ${TARGET} == "pc98"
|
|
_cc= gnu/usr.bin/cc
|
|
.endif
|
|
.endif
|
|
|
|
cross-tools: .MAKE
|
|
.for _tool in \
|
|
${_clang_libs} \
|
|
${_clang} \
|
|
${_binutils} \
|
|
${_cc} \
|
|
usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
|
|
${_btxld} \
|
|
${_crunchide} \
|
|
${_kgzip}
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${MAKE} DIRPRFX=${_tool}/ obj && \
|
|
${MAKE} DIRPRFX=${_tool}/ depend && \
|
|
${MAKE} DIRPRFX=${_tool}/ all && \
|
|
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
|
|
.endfor
|
|
|
|
#
|
|
# hierarchy - ensure that all the needed directories are present
|
|
#
|
|
hierarchy hier:
|
|
cd ${.CURDIR}/etc && ${HMAKE} distrib-dirs
|
|
|
|
#
|
|
# libraries - build all libraries, and install them under ${DESTDIR}.
|
|
#
|
|
# The list of libraries with dependents (${_prebuild_libs}) and their
|
|
# interdependencies (__L) are built automatically by the
|
|
# ${.CURDIR}/tools/make_libdeps.sh script.
|
|
#
|
|
libraries: .MAKE
|
|
cd ${.CURDIR} && \
|
|
${MAKE} -f Makefile.inc1 _prereq_libs && \
|
|
${MAKE} -f Makefile.inc1 _startup_libs && \
|
|
${MAKE} -f Makefile.inc1 _prebuild_libs && \
|
|
${MAKE} -f Makefile.inc1 _generic_libs
|
|
|
|
#
|
|
# static libgcc.a prerequisite for shared libc
|
|
#
|
|
_prereq_libs= gnu/lib/libssp/libssp_nonshared gnu/lib/libgcc lib/libcompiler_rt
|
|
|
|
# These dependencies are not automatically generated:
|
|
#
|
|
# gnu/lib/csu, gnu/lib/libgcc, lib/csu and lib/libc must be built before
|
|
# all shared libraries for ELF.
|
|
#
|
|
_startup_libs= gnu/lib/csu
|
|
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
|
|
_startup_libs+= lib/csu/${MACHINE_ARCH}-elf
|
|
.elif exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
|
|
_startup_libs+= lib/csu/${MACHINE_ARCH}
|
|
.else
|
|
_startup_libs+= lib/csu/${MACHINE_CPUARCH}
|
|
.endif
|
|
_startup_libs+= gnu/lib/libgcc
|
|
_startup_libs+= lib/libcompiler_rt
|
|
_startup_libs+= lib/libc
|
|
.if ${MK_LIBCPLUSPLUS} != "no"
|
|
_startup_libs+= lib/libcxxrt
|
|
.endif
|
|
|
|
gnu/lib/libgcc__L: lib/libc__L
|
|
.if ${MK_LIBCPLUSPLUS} != "no"
|
|
lib/libcxxrt__L: gnu/lib/libgcc__L
|
|
.endif
|
|
|
|
_prebuild_libs= ${_kerberos5_lib_libasn1} \
|
|
${_kerberos5_lib_libhdb} \
|
|
${_kerberos5_lib_libheimbase} \
|
|
${_kerberos5_lib_libheimntlm} \
|
|
${_kerberos5_lib_libheimsqlite} \
|
|
${_kerberos5_lib_libheimipcc} \
|
|
${_kerberos5_lib_libhx509} ${_kerberos5_lib_libkrb5} \
|
|
${_kerberos5_lib_libroken} \
|
|
${_kerberos5_lib_libwind} \
|
|
${_lib_atf} \
|
|
lib/libbz2 ${_libcom_err} lib/libcrypt \
|
|
lib/libelf lib/libexpat \
|
|
${_lib_libgssapi} ${_lib_libipx} \
|
|
lib/libkiconv lib/libkvm lib/liblzma lib/libmd \
|
|
lib/ncurses/ncurses lib/ncurses/ncursesw \
|
|
lib/libopie lib/libpam ${_lib_libthr} \
|
|
lib/libradius lib/libsbuf lib/libtacplus \
|
|
${_cddl_lib_libumem} ${_cddl_lib_libnvpair} \
|
|
${_cddl_lib_libzfs_core} \
|
|
lib/libutil ${_lib_libypclnt} lib/libz lib/msun \
|
|
${_secure_lib_libcrypto} ${_lib_libldns} \
|
|
${_secure_lib_libssh} ${_secure_lib_libssl}
|
|
|
|
.if ${MK_TESTS} != "no"
|
|
_lib_atf= lib/atf
|
|
.endif
|
|
|
|
.if ${MK_LIBTHR} != "no"
|
|
_lib_libthr= lib/libthr
|
|
.endif
|
|
|
|
.if ${MK_OFED} != "no"
|
|
_ofed_lib= contrib/ofed/usr.lib/
|
|
.endif
|
|
|
|
_generic_libs= ${_cddl_lib} gnu/lib ${_kerberos5_lib} lib ${_secure_lib} usr.bin/lex/lib ${_ofed_lib}
|
|
.for _DIR in ${LOCAL_LIB_DIRS}
|
|
.if exists(${.CURDIR}/${_DIR}/Makefile)
|
|
_generic_libs+= ${_DIR}
|
|
.endif
|
|
.endfor
|
|
|
|
lib/libopie__L lib/libtacplus__L: lib/libmd__L
|
|
|
|
.if ${MK_CDDL} != "no"
|
|
_cddl_lib_libumem= cddl/lib/libumem
|
|
_cddl_lib_libnvpair= cddl/lib/libnvpair
|
|
_cddl_lib_libzfs_core= cddl/lib/libzfs_core
|
|
_cddl_lib= cddl/lib
|
|
cddl/lib/libzfs_core__L: cddl/lib/libnvpair__L
|
|
.endif
|
|
|
|
.if ${MK_CRYPT} != "no"
|
|
.if ${MK_OPENSSL} != "no"
|
|
_secure_lib_libcrypto= secure/lib/libcrypto
|
|
_secure_lib_libssl= secure/lib/libssl
|
|
lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L
|
|
.if ${MK_LDNS} != "no"
|
|
_lib_libldns= lib/libldns
|
|
lib/libldns__L: secure/lib/libcrypto__L
|
|
.endif
|
|
.if ${MK_OPENSSH} != "no"
|
|
_secure_lib_libssh= secure/lib/libssh
|
|
secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L
|
|
.if ${MK_LDNS} != "no"
|
|
secure/lib/libssh__L: lib/libldns__L
|
|
.endif
|
|
.if ${MK_KERBEROS_SUPPORT} != "no"
|
|
secure/lib/libssh__L: lib/libgssapi__L kerberos5/lib/libkrb5__L \
|
|
kerberos5/lib/libhx509__L kerberos5/lib/libasn1__L lib/libcom_err__L \
|
|
lib/libmd__L kerberos5/lib/libroken__L
|
|
.endif
|
|
.endif
|
|
.endif
|
|
_secure_lib= secure/lib
|
|
.endif
|
|
|
|
.if ${MK_KERBEROS} != "no"
|
|
kerberos5/lib/libasn1__L: lib/libcom_err__L kerberos5/lib/libroken__L
|
|
kerberos5/lib/libhdb__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
|
|
kerberos5/lib/libkrb5__L kerberos5/lib/libroken__L \
|
|
kerberos5/lib/libwind__L kerberos5/lib/libheimsqlite__L
|
|
kerberos5/lib/libheimntlm__L: secure/lib/libcrypto__L kerberos5/lib/libkrb5__L \
|
|
kerberos5/lib/libroken__L lib/libcom_err__L
|
|
kerberos5/lib/libhx509__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
|
|
secure/lib/libcrypto__L kerberos5/lib/libroken__L kerberos5/lib/libwind__L
|
|
kerberos5/lib/libkrb5__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
|
|
lib/libcrypt__L secure/lib/libcrypto__L kerberos5/lib/libhx509__L \
|
|
kerberos5/lib/libroken__L kerberos5/lib/libwind__L \
|
|
kerberos5/lib/libheimbase__L kerberos5/lib/libheimipcc__L
|
|
kerberos5/lib/libroken__L: lib/libcrypt__L
|
|
kerberos5/lib/libwind__L: kerberos5/lib/libroken__L lib/libcom_err__L
|
|
kerberos5/lib/libheimbase__L: lib/libthr__L
|
|
kerberos5/lib/libheimipcc__L: kerberos5/lib/libroken__L kerberos5/lib/libheimbase__L lib/libthr__L
|
|
kerberos5/lib/libheimsqlite__L: lib/libthr__L
|
|
.endif
|
|
|
|
.if ${MK_GSSAPI} != "no"
|
|
_lib_libgssapi= lib/libgssapi
|
|
.endif
|
|
|
|
.if ${MK_IPX} != "no"
|
|
_lib_libipx= lib/libipx
|
|
.endif
|
|
|
|
.if ${MK_KERBEROS} != "no"
|
|
_kerberos5_lib= kerberos5/lib
|
|
_kerberos5_lib_libasn1= kerberos5/lib/libasn1
|
|
_kerberos5_lib_libhdb= kerberos5/lib/libhdb
|
|
_kerberos5_lib_libheimbase= kerberos5/lib/libheimbase
|
|
_kerberos5_lib_libkrb5= kerberos5/lib/libkrb5
|
|
_kerberos5_lib_libhx509= kerberos5/lib/libhx509
|
|
_kerberos5_lib_libroken= kerberos5/lib/libroken
|
|
_kerberos5_lib_libheimntlm= kerberos5/lib/libheimntlm
|
|
_kerberos5_lib_libheimsqlite= kerberos5/lib/libheimsqlite
|
|
_kerberos5_lib_libheimipcc= kerberos5/lib/libheimipcc
|
|
_kerberos5_lib_libwind= kerberos5/lib/libwind
|
|
_libcom_err= lib/libcom_err
|
|
.endif
|
|
|
|
.if ${MK_NIS} != "no"
|
|
_lib_libypclnt= lib/libypclnt
|
|
.endif
|
|
|
|
.if ${MK_OPENSSL} == "no"
|
|
lib/libradius__L: lib/libmd__L
|
|
.endif
|
|
|
|
.for _lib in ${_prereq_libs}
|
|
${_lib}__PL: .PHONY .MAKE
|
|
.if exists(${.CURDIR}/${_lib})
|
|
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_lib} && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ obj && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ depend && \
|
|
${MAKE} -DNO_TESTS -DNO_PROFILE -DNO_PIC \
|
|
DIRPRFX=${_lib}/ all && \
|
|
${MAKE} -DNO_TESTS -DNO_PROFILE -DNO_PIC \
|
|
DIRPRFX=${_lib}/ install
|
|
.endif
|
|
.endfor
|
|
|
|
.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
|
|
${_lib}__L: .PHONY .MAKE
|
|
.if exists(${.CURDIR}/${_lib})
|
|
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_lib} && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ obj && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ depend && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ all && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=${_lib}/ install
|
|
.endif
|
|
.endfor
|
|
|
|
# libpam is special: we need to build static PAM modules before
|
|
# static PAM library, and dynamic PAM library before dynamic PAM
|
|
# modules.
|
|
lib/libpam__L: .PHONY .MAKE
|
|
${_+_}@${ECHODIR} "===> lib/libpam (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/lib/libpam && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=lib/libpam/ obj && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=lib/libpam/ depend && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=lib/libpam/ \
|
|
-D_NO_LIBPAM_SO_YET all && \
|
|
${MAKE} -DNO_TESTS DIRPRFX=lib/libpam/ \
|
|
-D_NO_LIBPAM_SO_YET install
|
|
|
|
_prereq_libs: ${_prereq_libs:S/$/__PL/}
|
|
_startup_libs: ${_startup_libs:S/$/__L/}
|
|
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
|
|
_generic_libs: ${_generic_libs:S/$/__L/}
|
|
|
|
.for __target in all clean cleandepend cleandir depend includes obj
|
|
.for entry in ${SUBDIR}
|
|
${entry}.${__target}__D: .PHONY .MAKE
|
|
${_+_}@set -e; if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
|
|
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \
|
|
edir=${entry}.${MACHINE_ARCH}; \
|
|
cd ${.CURDIR}/$${edir}; \
|
|
else \
|
|
${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \
|
|
edir=${entry}; \
|
|
cd ${.CURDIR}/$${edir}; \
|
|
fi; \
|
|
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
|
|
.endfor
|
|
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
|
|
.endfor
|
|
|
|
.include <bsd.subdir.mk>
|
|
|
|
.if make(check-old) || make(check-old-dirs) || \
|
|
make(check-old-files) || make(check-old-libs) || \
|
|
make(delete-old) || make(delete-old-dirs) || \
|
|
make(delete-old-files) || make(delete-old-libs)
|
|
|
|
#
|
|
# check for / delete old files section
|
|
#
|
|
|
|
.include "ObsoleteFiles.inc"
|
|
|
|
OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \
|
|
else you can not start such an application. Consult UPDATING for more \
|
|
information regarding how to cope with the removal/revision bump of a \
|
|
specific library."
|
|
|
|
.if !defined(BATCH_DELETE_OLD_FILES)
|
|
RM_I=-i
|
|
.else
|
|
RM_I=-v
|
|
.endif
|
|
|
|
delete-old-files:
|
|
@echo ">>> Removing old files (only deletes safe to delete libs)"
|
|
# Ask for every old file if the user really wants to remove it.
|
|
# It's annoying, but better safe than sorry.
|
|
# NB: We cannot pass the list of OLD_FILES as a parameter because the
|
|
# argument list will get too long. Using .for/.endfor make "loops" will make
|
|
# the Makefile parser segfault.
|
|
@exec 3<&0; \
|
|
cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_FILES -V "OLD_FILES:Musr/share/*.gz:R" | xargs -n1 | \
|
|
while read file; do \
|
|
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
|
|
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
|
|
rm ${RM_I} "${DESTDIR}/$${file}" <&3; \
|
|
fi; \
|
|
done
|
|
# Remove catpages without corresponding manpages.
|
|
@exec 3<&0; \
|
|
find ${DESTDIR}/usr/share/man/cat* ! -type d | \
|
|
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
|
|
while read catpage; do \
|
|
read manpage; \
|
|
if [ ! -e "$${manpage}" ]; then \
|
|
rm ${RM_I} $${catpage} <&3; \
|
|
fi; \
|
|
done
|
|
@echo ">>> Old files removed"
|
|
|
|
check-old-files:
|
|
@echo ">>> Checking for old files"
|
|
@cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_FILES -V "OLD_FILES:Musr/share/*.gz:R" | xargs -n1 | \
|
|
while read file; do \
|
|
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
|
|
echo "${DESTDIR}/$${file}"; \
|
|
fi; \
|
|
done
|
|
# Check for catpages without corresponding manpages.
|
|
@find ${DESTDIR}/usr/share/man/cat* ! -type d | \
|
|
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
|
|
while read catpage; do \
|
|
read manpage; \
|
|
if [ ! -e "$${manpage}" ]; then \
|
|
echo $${catpage}; \
|
|
fi; \
|
|
done
|
|
|
|
delete-old-libs:
|
|
@echo ">>> Removing old libraries"
|
|
@echo "${OLD_LIBS_MESSAGE}" | fmt
|
|
@exec 3<&0; \
|
|
cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_LIBS | xargs -n1 | \
|
|
while read file; do \
|
|
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
|
|
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
|
|
rm ${RM_I} "${DESTDIR}/$${file}" <&3; \
|
|
fi; \
|
|
for ext in debug symbols; do \
|
|
if ! [ -e "${DESTDIR}/$${file}" ] && [ -f \
|
|
"${DESTDIR}${DEBUGDIR}/$${file}.$${ext}" ]; then \
|
|
rm ${RM_I} "${DESTDIR}${DEBUGDIR}/$${file}.$${ext}" \
|
|
<&3; \
|
|
fi; \
|
|
done; \
|
|
done
|
|
@echo ">>> Old libraries removed"
|
|
|
|
check-old-libs:
|
|
@echo ">>> Checking for old libraries"
|
|
@cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_LIBS | xargs -n1 | \
|
|
while read file; do \
|
|
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
|
|
echo "${DESTDIR}/$${file}"; \
|
|
fi; \
|
|
for ext in debug symbols; do \
|
|
if [ -f "${DESTDIR}${DEBUGDIR}/$${file}.$${ext}" ]; then \
|
|
echo "${DESTDIR}${DEBUGDIR}/$${file}.$${ext}"; \
|
|
fi; \
|
|
done; \
|
|
done
|
|
|
|
delete-old-dirs:
|
|
@echo ">>> Removing old directories"
|
|
@cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_DIRS | xargs -n1 | sort -r | \
|
|
while read dir; do \
|
|
if [ -d "${DESTDIR}/$${dir}" ]; then \
|
|
rmdir -v "${DESTDIR}/$${dir}" || true; \
|
|
elif [ -L "${DESTDIR}/$${dir}" ]; then \
|
|
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
|
|
fi; \
|
|
done
|
|
@echo ">>> Old directories removed"
|
|
|
|
check-old-dirs:
|
|
@echo ">>> Checking for old directories"
|
|
@cd ${.CURDIR}; \
|
|
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
|
|
-V OLD_DIRS | xargs -n1 | \
|
|
while read dir; do \
|
|
if [ -d "${DESTDIR}/$${dir}" ]; then \
|
|
echo "${DESTDIR}/$${dir}"; \
|
|
elif [ -L "${DESTDIR}/$${dir}" ]; then \
|
|
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
|
|
fi; \
|
|
done
|
|
|
|
delete-old: delete-old-files delete-old-dirs
|
|
@echo "To remove old libraries run '${MAKE} delete-old-libs'."
|
|
|
|
check-old: check-old-files check-old-libs check-old-dirs
|
|
@echo "To remove old files and directories run '${MAKE} delete-old'."
|
|
@echo "To remove old libraries run '${MAKE} delete-old-libs'."
|
|
|
|
.endif
|
|
|
|
#
|
|
# showconfig - show build configuration.
|
|
#
|
|
showconfig:
|
|
@${MAKE} -n -f bsd.own.mk -V dummy -dg1 2>&1 | grep ^MK_ | sort
|
|
|
|
.if !empty(KRNLOBJDIR) && !empty(KERNCONF)
|
|
DTBOUTPUTPATH= ${KRNLOBJDIR}/${KERNCONF}/
|
|
|
|
.if !defined(FDT_DTS_FILE) || empty(FDT_DTS_FILE)
|
|
.if exists(${KERNCONFDIR}/${KERNCONF})
|
|
FDT_DTS_FILE!= awk 'BEGIN {FS="="} /^makeoptions[[:space:]]+FDT_DTS_FILE/ {print $$2}' \
|
|
${KERNCONFDIR}/${KERNCONF} ; echo
|
|
.endif
|
|
.endif
|
|
|
|
.endif
|
|
|
|
.if !defined(DTBOUTPUTPATH) || !exists(${DTBOUTPUTPATH})
|
|
DTBOUTPUTPATH= ${.CURDIR}
|
|
.endif
|
|
|
|
#
|
|
# Build 'standalone' Device Tree Blob
|
|
#
|
|
builddtb:
|
|
@if [ "${FDT_DTS_FILE}" = "" ]; then \
|
|
echo "ERROR: FDT_DTS_FILE must be specified!"; \
|
|
exit 1; \
|
|
fi; \
|
|
if [ ! -f ${.CURDIR}/sys/boot/fdt/dts/${FDT_DTS_FILE} ]; then \
|
|
echo "ERROR: Specified DTS file (${FDT_DTS_FILE}) does not \
|
|
exist!"; \
|
|
exit 1; \
|
|
fi; \
|
|
if [ "${DTBOUTPUTPATH}" = "${.CURDIR}" ]; then \
|
|
echo "WARNING: DTB will be placed in the current working \
|
|
directory"; \
|
|
fi
|
|
@PATH=${TMPPATH} \
|
|
dtc -O dtb -o \
|
|
${DTBOUTPUTPATH}/`echo ${FDT_DTS_FILE} | cut -d. -f1`.dtb -b 0 \
|
|
-p 1024 ${.CURDIR}/sys/boot/fdt/dts/${FDT_DTS_FILE}
|
|
|
|
###############
|
|
|
|
.if defined(XDEV) && defined(XDEV_ARCH)
|
|
|
|
.if ${XDEV} == ${MACHINE} && ${XDEV_ARCH} == ${MACHINE_ARCH}
|
|
XDEV_CPUTYPE?=${CPUTYPE}
|
|
.else
|
|
XDEV_CPUTYPE?=${TARGET_CPUTYPE}
|
|
.endif
|
|
|
|
NOFUN=-DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
|
|
-DWITHOUT_MAN -DWITHOUT_NLS -DNO_PROFILE \
|
|
-DWITHOUT_KERBEROS -DWITHOUT_RESCUE -DNO_WARNS \
|
|
TARGET=${XDEV} TARGET_ARCH=${XDEV_ARCH} \
|
|
CPUTYPE=${XDEV_CPUTYPE}
|
|
|
|
XDDIR=${XDEV_ARCH}-freebsd
|
|
XDTP=usr/${XDDIR}
|
|
CDBENV=MAKEOBJDIRPREFIX=${MAKEOBJDIRPREFIX}/${XDDIR} \
|
|
INSTALL="sh ${.CURDIR}/tools/install.sh"
|
|
CDENV= ${CDBENV} \
|
|
_SHLIBDIRPREFIX=${XDDESTDIR} \
|
|
TOOLS_PREFIX=${XDDESTDIR}
|
|
CD2CFLAGS=-isystem ${XDDESTDIR}/usr/include -L${XDDESTDIR}/usr/lib \
|
|
-B${XDDESTDIR}/usr/lib
|
|
CD2ENV=${CDENV} CC="${CC} ${CD2CFLAGS}" \
|
|
MACHINE=${XDEV} MACHINE_ARCH=${XDEV_ARCH}
|
|
|
|
CDTMP= ${MAKEOBJDIRPREFIX}/${XDDIR}/${.CURDIR}/tmp
|
|
CDMAKE=${CDENV} PATH=${CDTMP}/usr/bin:${PATH} ${MAKE} ${NOFUN}
|
|
CD2MAKE=${CD2ENV} PATH=${CDTMP}/usr/bin:${XDDESTDIR}/usr/bin:${PATH} ${MAKE} ${NOFUN}
|
|
XDDESTDIR=${DESTDIR}/${XDTP}
|
|
.if !defined(OSREL)
|
|
OSREL!= uname -r | sed -e 's/[-(].*//'
|
|
.endif
|
|
|
|
.ORDER: xdev-build xdev-install
|
|
xdev: xdev-build xdev-install
|
|
|
|
.ORDER: _xb-worldtmp _xb-bootstrap-tools _xb-build-tools _xb-cross-tools
|
|
xdev-build: _xb-worldtmp _xb-bootstrap-tools _xb-build-tools _xb-cross-tools
|
|
|
|
_xb-worldtmp:
|
|
mkdir -p ${CDTMP}/usr
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${CDTMP}/usr >/dev/null
|
|
|
|
_xb-bootstrap-tools:
|
|
.for _tool in \
|
|
${_clang_tblgen}
|
|
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ obj && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ depend && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ all && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ DESTDIR=${CDTMP} install
|
|
.endfor
|
|
|
|
_xb-build-tools:
|
|
${_+_}@cd ${.CURDIR}; \
|
|
${CDBENV} ${MAKE} -f Makefile.inc1 ${NOFUN} build-tools
|
|
|
|
_xb-cross-tools:
|
|
.for _tool in \
|
|
gnu/usr.bin/binutils \
|
|
gnu/usr.bin/cc \
|
|
usr.bin/ar \
|
|
${_clang_libs} \
|
|
${_clang}
|
|
${_+_}@${ECHODIR} "===> xdev ${_tool} (obj,depend,all)"; \
|
|
cd ${.CURDIR}/${_tool} && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ obj && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ depend && \
|
|
${CDMAKE} DIRPRFX=${_tool}/ all
|
|
.endfor
|
|
|
|
_xi-mtree:
|
|
${_+_}@${ECHODIR} "mtree populating ${XDDESTDIR}"
|
|
mkdir -p ${XDDESTDIR}
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
|
|
-p ${XDDESTDIR} >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
|
|
-p ${XDDESTDIR}/usr >/dev/null
|
|
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
|
|
-p ${XDDESTDIR}/usr/include >/dev/null
|
|
|
|
.ORDER: xdev-build _xi-mtree _xi-cross-tools _xi-includes _xi-libraries _xi-links
|
|
xdev-install: xdev-build _xi-mtree _xi-cross-tools _xi-includes _xi-libraries _xi-links
|
|
|
|
_xi-cross-tools:
|
|
@echo "_xi-cross-tools"
|
|
.for _tool in \
|
|
gnu/usr.bin/binutils \
|
|
gnu/usr.bin/cc \
|
|
usr.bin/ar \
|
|
${_clang}
|
|
${_+_}@${ECHODIR} "===> xdev ${_tool} (install)"; \
|
|
cd ${.CURDIR}/${_tool}; \
|
|
${CDMAKE} DIRPRFX=${_tool}/ install DESTDIR=${XDDESTDIR}
|
|
.endfor
|
|
|
|
_xi-includes:
|
|
${_+_}cd ${.CURDIR}; ${CD2MAKE} -f Makefile.inc1 par-includes \
|
|
DESTDIR=${XDDESTDIR}
|
|
|
|
_xi-libraries:
|
|
${_+_}cd ${.CURDIR}; ${CD2MAKE} -f Makefile.inc1 libraries \
|
|
DESTDIR=${XDDESTDIR}
|
|
|
|
_xi-links:
|
|
${_+_}cd ${XDDESTDIR}/usr/bin; \
|
|
mkdir -p ../../../../usr/bin; \
|
|
for i in *; do \
|
|
ln -sf ../../${XDTP}/usr/bin/$$i \
|
|
../../../../usr/bin/${XDDIR}-$$i; \
|
|
ln -sf ../../${XDTP}/usr/bin/$$i \
|
|
../../../../usr/bin/${XDDIR}${OSREL}-$$i; \
|
|
done
|
|
.else
|
|
xdev xdev-build xdev-install:
|
|
@echo "*** Error: Both XDEV and XDEV_ARCH must be defined for \"${.TARGET}\" target"
|
|
.endif
|
|
|
|
buildkernel ${WMAKE_TGTS} ${.ALLTARGETS:M_*}: .MAKE
|